Problem about my ipod HIFI remote

hi all, i got a hi-fi speaker for my ipod photo 30GB yesterday. but seems like the volumne buttons on remote don't fully work. i couldn't turn down the volume by using remote. and the menu button was not working too. so i was wondering if these are my problem or apple's. i need to make this clear before i take further action, if this is my own problem, so i will just take the product back to the store and get an exchange. i don't wanna waste my time on driving to the store if these problems also happens to other ppl who use ipod photo 30GB
thx alot
Mike

Regarding the menu button -
The Menu button on the remote does not perform the same function as pressing the Menu button on the iPod. The Menu button on the Remote changes playback between the iPod and an audio device connected to the audio input port. Because the remote does not have a wheel or a select button, you cannot use the remote to navigate the menus or skip to a different playlist on iPod. You must use the iPod's controls to navigate the menus or choose another playlist.
For the volume button - please take off the battery inside the remote for 1 minute and put it back, also unplug the ac cord of the HiFi for a minute, reconnect it back. Hope it helps

Similar Messages

Question about the "iPod radio remote"

I assume the "radio remote" is the same for every country and is under software control. I want to buy in Canada but use in UK and Canada.
Has anyone got one and seen the RDS work, in the UK almost every FM channel is RDS. Do they have RDS in Canada (Toronto) can anyone confirm?
And of course it says FM so this again I assume no AM, not that I need AM it was just an interest in if it could do it.
What happens about headphones, you can plug a pair into the remote, can you still plug into the bottom of the iPod or does the remote connector get in the way.
What is the story with "line out" I use this all the time as I amp my headphones. So I assume you cant use line out? or is the remote a line out also.
And I assume the remote cable and you headphones act as the aerial, how is the quality? Is it any good indoors, some little FM radios I have used drop to mono indoors. Does this Apple one frop to mono if the signal is weak?
Someone that has one can perhaps answer
Cheers
Ray

I can at least answer some of the questions.
The RDS function on this radio/remote is poor in the
UK. You have to set the radio function on the iPod
to "Europe" and when you do this RDS info is not
displayed on almost all radio stations such as
Virgin, XFM, Capital, GLR, etc. It does display on
Radio 2 however. At least, this is my finding. So
it's unpredictable at best. Setting the radio to
"USA" on the iPod increases the likelihood of getting
the RDS to display, but the downside is that you can
then only tune the radio in increments of 2mhz which
is a bit awkward if your looking for 89.1mhz!
There are three settings for the radio which you
choose via the iPod. They are USA/Europe/Japan. No
setting for Canada, although I'm sure you will still
be able to use it over there as I can still use mine
here in the UK even if it's set to USA.
No, there is no AM radio.
You can plug headphones into the remote or the
headphone jack on the iPod, or both at the same time.
I'm not sure I understand your question about the
bottom of the iPod. The radio plugs into the iPod
via the dock connector.
There is no 'line out' on the iPod. If you mean the
one on the dock, then no you can't use it as you
cannot place the iPod into the dock whilst the
radio/remote is connected as they use the same
connector.
Yes the cable of the remote acts as the aerial.
Reception is surprisingly good where I am, but it
will of course depend on where you use it. I've
used it indoors without any drop in signal or it
dropping to mono.
Lastly, you need to update the software for both the
nano or the 5th generation for the radio to work
(after you do this a radio function appears in the
menu), and some users have found that doing this
screws up the iPod. I have mine working on both the
nano and the 5th gen without any problems.
There is a review of the radio/remote here. I like
mine and consider it a worthwhile accessory, but of
course there will be those who disagree.
iPod
Radio/Remote Review.
Thank you for the reply.
Think your right USA or Europe will work in Canada.
Yes I mean the line out via the dock, I just wondered if the remote become a line out socket (I also use a pocket dock for line out for headphone amp as I use a pair of Sennheiser HD600 with my ipod) but of course that is silly becasue you have a volume control on the remote and line out is normaly fixed.
Based on your views I shall get one in March when in Toronto
Cheers
Ray

IPod HiFi Remote

The volume function works fine on my remote with the HiFi, but I am unable to change tracks using the same remote. WHY?!

Send it back im about to call apple i came home to fing my ipod remote smoking on my hifi im pisssedbecause the fukcing thing damaged my hifi and apple wont take the whole thing back they say its something about the way I put in the battery BuwlShet the are thats at least what they said when i brought it to a apple store/the real apple store in sheron

Using Apple Ipod HiFi with Apple TV / Need better remote

The TV I hooked up my Apple TV to is in a built in cabinet and there is not enough room for a stereo and speaker system. So, I took my Apple Ipod HiFi speaker and plugged it into the audio out plugs of the Apple TV. I can squeeze the Apple HiFi into the shelf above the TV and it fits great. The component outs on the Apple TV still go to my HDTV. It works great and I can listen to my music from Itunes on my Apple HiFi. The problem is the remote for the Apple HiFi is the same as the remote for Apple TV. So, if I have a song playing and I try to scroll for a new song, if I scroll down the volume on the Apple HiFi goes down. If I scroll up, the volume on the Apple HiFi goes up while I'm scrolling up. It seems like Apple should have a better remote solution to let you control the Apple TV and the Apple HiFi separately with the same remote. Anyone know how I could do this?

You can pair each remote with each device by pressing the menu + FF buttons down for 6 seconds, hold the remote close to each device, you might want to pair the  hifi in another location and bring it back afterwards to avoid confusion.

Problems in compatibility of iPod radio remote with iPod classic 160 GB

Hi all,
I have just bought a iPod classic 160 GB and want to buy a iPod radio remote as well. However, after I have done my research, I find the radio remote is not compatible with iPod classic perfectly…
Do you think it is a good idea for me to wait a new radio remote (maybe) or later Apple will release update?
Thanks

I use my Radio Remote with a Classic; it does everything that it had with my 5G-Video EXCEPT it will not allow me to set radio stations, either with the Radio Remote's control or the iPod's control.
I have spoken with an iPod specialist (Apple Care) and according to him Apple has acknowleged less than 100% compatibility/functionality with the Radio Remote and the Classics. One of the reasons, he stated, was that several 5G-Video iPods were "getting fried" when the Remote was not fully connected to the docking-port. So Apple has decided to reengineer the port [for better a connection, I gather]. What puzzles me the most about the new generation of iPods is why they were rolled out without warning customers that their Car-Charger, Video Player, dock, AV Cable, or APPLE'S OWN Remote will not play nice with each other!
This go around, it's find out the hard way.

I need help please! Can pictures get on your icloud other ways? Can something be put on there by someone other than yourself, liked public wifi or hacked? Got a big problem h some **** on an iPod and I am to knowledgeble about the ipod...thanks

. Can pictures get on your icloud other ways? Can something be put on there by someone other than yourself, liked public wifi or hacked? Got a big problem with some **** on an iPod and I am to knowledgeble about the ipod...thanks

You're not confusing this with a shared Photo Stream...?
Because the short answer is no, photos don't appear unless they were put there by someone with your Apple ID credentials. To rule out that possibility, change your Apple ID password by carefully following all these instructions:
iCloud: Change your iCloud account password
If you decide to change your password, and you also want to change your Apple ID, I recommend you do not concurrently change your Apple ID until sufficient time has passed and you are confident the password change has been effected on all your iOS devices. 24 hours ought to be more than enough.
It is not necessary to change your Apple ID unless it is an email address you no longer wish to use.

I am having problems with my ipod syncing all of my videos to my ipod from my itunes playlist, it will only sync about half even though they are all checked

i am having problems with my ipod syncing all of my videos to my ipod from my itunes playlist, it will only sync about half even though they are all checked

I assume there is more than ample space remaining on your iPod to hold all the videos? Are you getting any error messages during the sync process?
Do all of these videos play okay in iTunes? Is the sync only checked songs and videos option enabled from under the iPod's Summary tab?
What other setting do you have enabled from under the iPod's video configuration tab in iTunes?
B-rock

IPod HiFi volume problems

I just moved my HiFi into a different room and now it only plays at a very high volume. When I try to lower the volume, remote and on the box, the light flashes orange and eventually just mutes. Then the up volume flashes green and it comes back to a very high volume. Any help?

Disconnect the ac power cord of the iPod HiFi for 30 minutes and also take off the battery inside the iPod HiFi. See if it helps.
Have you tried to connect other device e.g. CD players and connect it on the back of the iPod HiFi? See what happens....

MBP with IPod HiFi and Optical Cable Problem??

Hey guys, I just picked up a Hifi and was hoping to use it with my macbook pro. When I hook up a normal 3.5mm jack into the hifi's input it works, but when I use an optical cable it does not. Using the volume keys on my mbp bring up the normal Volume icon on-screen but there is a small circle with a line through it just below. Also, in the system preferences, under Sound and Output it says "The selected device has no output controls"
Any ideas? Can it work with optical cables? I can always use a traditional 3.5mm jack but would prefer the optical
Macbook Pro Mac OS X (10.4.8)

It works in my case, I am now playing a song on my Itunes from my computer's optical out (G5 Tower) to iPod HiFi via a digital optical cable
Connect external speakers, headphones, or optical digital audio equipment. The headphone / line output jack accommodates optical digital audio output, analog audio output with a 24-bit, 44.1-192 kHz D/A converter, digital audio output up to 24-bit stereo and 44.1-192 kHz sampling rate and supporting encoded digital audio output (AC3 and DTS). For analog headphone / line output a standard audio cable with 3.5mm metal plug should be used. For digital audio, a standard toslink cable with a toslink mini-plug adapter can be used.
Open System Reference, sound, then output, in the box of choose a device for sound output , do you see the digital out, optical digital-out port?
Make sure out the output volume, the mute box is unchecked.
Regarding, the volume key on the computer is disable when your are using the optical output

IPod HiFi

Hi,
I have a problem with my iPhone (Software Running 1.1.4) When I dock the iPhone to my iPod Hifi, it does not play any music through it. It says it needs to disable the radio -> flight mode and I hit okay. It turns off the phone radio and then I go to the iPod function on the phone. When I select a song, it doesn't play any music through the iPod Hifi. The remote doesn't even function the iPhone either. Is the iPhone incompatible with the hifi?
Thanks, Paul

It is normal,
The Menu button on the remote does not perform the same function as pressing the Menu button on the iPod. The Menu button on the Remote changes playback between the iPod and an audio device connected to the audio input port. Because the remote does not have a wheel or a select button, you cannot use the remote to navigate the menus or skip to a different playlist on iPod. You must use the iPod's controls to navigate the menus or choose another playlist.

The "Cover Flow" / "Album Artist" duplicate albums problem on the iPod

Hi Guys,
I've made some research about this issue and got to some interesting conclusions.
DISCLAIMER:
1. I searched the web and found people describing this problem since 2006 till 2009 and the solution always revolved around not using the "Artist" and the "Album Artist" tags like they should be used.
2. I did a lot of testing, including re-writing the ID3 tags in different versions and formats to rule out any issues around the tags themselves.
3. If the stuff I'm going to describe is already well known than sorry about that, I just couldn't find it anywhere.
PROBLEM:
An album that has a single Album Artist and different Artists appears several times in the iPod Cover Flow although it looks just fine in iTunes.
Tagging the tracks as "Part of a Compilation" only partially solves the issue since the album will appear in the iPod Cover Flow as a Compilation showing up in the end and not together with the "Album Artist" like in iTunes and like it should.
It seems to be a simple issue around the way the iPod uses the "Album Artist" tag but it also seems to be around forever and it's strange Apple hasn't looked into it.
RESEARCH:
Since I just bought a new iPod Classic, I was again looking into this issue and now I was getting annoyed, strangely the behaviour wasn't the same for all the albums that were suffering from the problem. I found that when the Artist was a combination of, for example:
Album - AlbumX
Album Artist - ArtistX
Track 1 - ArtistX
Track 2 - ArtistX Feat. X
Track 3 - ArtistX
Track 4 - ArtistX Feat. Z
Track 10 - ArtistX Feat. XYZ
In the iPod Cover Flow I got ONLY TWO different albums, one with "ArtistX" and another one with "ArtistX Feat. X".
Well, this was very different from the normal behaviour when the artists are all completely different, in which case you get X amount of albums according to the X amount of different artist names you have.
CONCLUSION:
It seems to have something to do with the dot ".", I reached the conclusion that for Artist interpretation in the iPod when the Artist tag has a dot "." then it stops interpreting. That means that if you had a "." after the main artist name than it will show only once, like in the above example:
Album - AlbumX
Album Artist - ArtistX
Track 1 - ArtistX. <---- NOTICE THE DOT
Track 2 - ArtistX. Feat. X
Track 3 - ArtistX.
Track 4 - ArtistX. Feat. Z
Track 10 - ArtistX. Feat. XYZ
Then in the iPod Cover Flow it will show up only once as AlbumX - ArtistX.
I prefer to use the dots instead of just removing all the "Featurings and similar" since I can still see it normally if I play the track.
So, in the end, a combination like this in your "Artist" tag: "Album Artist"."Artist" would solve the problem in the iPod.
I would love for Apple to solve this issue and I hope this helps.
Has someone else noticed this or am I going crazy?
Thanks!

sometimes the official title of a release does include the Feat. Guest info.
Yes, but only in some (or many) cases. There seems to be no consistency here, as if Apple were paying no attention about where to put "feat. guest". And I guess most of the data in CDDB (Gracenote) still have "feat. guest" in Artist (correctly, in my opinion).
I quite agree that your workaround is the best workaround. I'm just too self-willed (obstinate?, I don't know the correct English) and don't want to pollute my Library with "wrong" data. Most of the problems would simply be solved if, just if Apple make iPods sort/group artists as iTunes do. Sorry but this is how I feel. I guess you can't help people like me. Thank you for your patience.
Anyway, we need a clear document from Apple describing what are the intended uses of various tags, and iTunes/iPods should obey this document. It seems for me that each Apple engineer is doing just what (s)he wants to do, without any guidelines.

I have been having problems with my iPod touch and my WRT...

I have been having problems with my iPod touch and my WRT54G router. I am so frustrated right now because after following the various steps mentioned in one of these threads, following Earthlink's prompts, and speaking with Apple, my iPod touch will still not work. It is connected to the internet but will not download the pages. It is quite frustrating. I have changed from WPA to WEP, I switched the 4th Generated key to the 1st. I've disabled this, enabled that. I've done just about everything. I updated the firmware. I made the switch from a partial bridge to a full bridge. Still nothing seems to work. Does anyone have any other suggestions? The one thing I have not done is enter the Apple code into the iPod which searches for website...-- I cannot access the internet with my iPod so this web address does not work. If anyone has been successful, will you please give me step by step instructions? Yesterday I was on the phone with Linksys for about an hour. Before that with Apple for about an hour and before that with Earthlink. How it is that I can walk into a Bread Co. or Apple Store and immediately connect to the internet with my iPod but I can't in my own house?? Everyone seems to think it is someone else's problem so I've gone around and around. Not one of the Linksys support personnel suggested I look here on this community forum. I had to pay the $9 fee to have advanced Linksys help but still my iPod does not work and when I called back, the man I spoke with seemed to think the case was closed because my PC, Laptop, and iPod are connected to the internet -- the iPod just won't download the webpages or get mail. My iPod's IP address begins with 192. I would appreciate any help on this matter
Message Edited by AlliW on 10-02-2008 02:06 PM

I had the same issues with my iPod touch & iPhone. It's a known issue with the touch & Linksys G routers. Go into settings on the touch & do the following.
1. Settings - wifi - linksys
2. Erase your DNS settings & input same numbers as in router
Settings.
3. Http proxy should be
in off position.
4. Close out & open safari you should now have a wireless
connection.

Problems with the iPod Touch (sound)

Hey,
I was wondering (more like desperately hoping) someone can help me with my problem.
I've had my iPod touch for almost 2 years now but lately I've been getting problems with the sound.
When I bought the iPod, I bought some decent sennheiser plug-in earbuds too, because I find the one's delivered with the ipod pretty low quality.
For over a year, I loved my ipod touch (it's my second one) but one day, for some unknown reason, my sound was at not even half of the usual volume.
I've checked the settings but cannot find the problem, so I tested the ipod ears delivered with the ipod since they were new, same story (the left earbud was slightly louder than the right for some time but not too long, then they both gone quiet).
I've checked on the internet before and someone said "try jailbraking your ipod, because that sometimes helps, so I did but no effect.
So I set it back to fabric settings and went to a switch store, they listened and found it odd too so they send it in because it was still under guarantee.
Now (today), I've gotten a completely new ipod touch 16 Gb. So, happy as I was, I went home to put my music on it, and what happens? The sound is slightly louder than the previous one but still WAY too quiet! If I'm on the bus, its no use listening to it because I cant understand the lyrics cause of the background noizes the bus makes... Its p*¨ssing me off bigtime that its still way too quiet, anyone got any ideas how to fix it?
Please don't send useless reply's like get ya ears checked because Im in the army and they get checked regularly and they are perfectly fine!
Maybe with someone knows some other program or app that I can use so I can fix this very irritating problem?
I have had 6 iPods before, from the first one that came out to the ipod touch 16 Gb, and its only with this one that Ive started having problems about a year ago.
Plus my girlfriend has an ipod too (not a touch) and on her ipod, everything works fine, my earbuds included :s
Please help!
Thanks in advance!
Toby

Omg, I've put over 2 hours of work in it to reinstall other versions of itunes, ios n such to then find out that they DID NOT test my ipod and sennheiser earbuds that I gave in along with my busted itouch.... They told me they work fine... Now I took my girlfriends earbuds cause nothing worked, turned out they are both broken and now I need to go back to the store for new ones, dont think that the previous itouch wasnt busted then after all cause it was, tried with 10 different sets of earbuds
anyway Im a happy man again with a decent itouch and good earbuds, that I can lend from me girlfriend...
Thanks for the help anyway

No Internet signal with 2 Airport express' & Ipod Hifi

My Airport express connects with a router and gives a wireless signal all over the house. The 2nd airport express (less than 50'ft. away connects to an Ipod Hifi. The 2nd airport blinks yellow and won't allow me to go onto the internet (ie radio streaming) while I am playing my Itunes thru the Ipod hifi successfully. Also, the 1st Airport is a soid green coIor.Why do I lose the internet signal when the Hifi is playing my Itunes library? I thought the 2nd airport just becomes a part of a network which is how it's setup under the Airport Admin. Utility? What am I doing wrong? Thanks for the help...Henry

my question is if they are set up to extend my network will my devices like iPhone, iPad, iPod all switch to the strongest available wifi? my set up as follows.
A newer Mac computer will automatically switch to the strongest wireless access point as it roams about the house, but unfortuntely the iOS operating system used in the iPhone, iPad, iPod etc. is not as sophisticated and will usually not switch automatically to another access point.
You will likely find that you need to power off the iOS device when you move to another area and power it back up to get it to pick up the strongest access point. Or, you would switch off the Wireless on the iOS device and then switch it back on when the device moves to another area.

New ipod nano doesn't fit new ipod hifi

I just bought a new 4 meg ipod nano and apple ipod hifi from the London Apple Store. The ipod nano doesn't fit in its adapter. Anyone know of this problem? I'm gobsmacked that Apple's quality control let this happen!
Thanks

The page
http://www.apple.com/ipodnano/specs.html
clearly says:
In the box:
* iPod nano
* Earphones
* USB 2.0 cable
* Dock adapter
* Quick Start guide
If the dock adapter is missing, which is what you need, because the iPod Hi-Fi only ships with an adapter for the 1st-gen iPod nano, then you need to contact Apple or your retailer.

Problem about my ipod HIFI remote

Similar Messages

Maybe you are looking for