Problem about my VGA graphics
I've upgraded my laptop from Win7 home premium to Win8 pro, everything in good condition but I still have a big problem with my VGA graphics, my VGA graphics was AMD radeon mobility 5470 and it couldn't recognize the driver, so I try everything to fix it, nothing done!! I installed intel HD graphics again with older version from HP, nothing change, so some body tell me how to fix it, thank all of you so much.
Try running Windows Update to see if it will update the driver for you.
Also give us the complete model number of your computer so maybe we can find it for you.
**Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
**Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Similar Messages
-
Standard VGA Graphics Adapter problem ot hp dv7-6178us
Hello, I have the problem with Standard VGA Graphics Adapter and I can't find a solution for it?
Can someone help with this driver?
Thanks!Hi:
You need this driver for the graphics setup in your model...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-105178-1&cc=us&dlc=en&lc=en... -
Standard vga graphics adapter of hp 110-025il update problem
sir,
i have a hp 110-025il desktop whose standard vga graphic adapter is not updating.
driver date-6/21/2006
driver version-6.1.7600.16385
please help to get me update
This question was solved.
View Solution.Hello ANIL94544128. Thank you for posting on the HP Forums.
I understand you are experiencing issues updating the computer's VGA graphic adapter. Without the operating system of the computer, my troubleshooting suggestions are limited. I can suggest to utilize the HP Support Assistant to update your drivers. For more information, please reference this HP document: http://h10010.www1.hp.com/ewfrf/wc/document?docname=bph07165&lc=en&cc=us&dlc=en
Let me know if you have any other questions or concerns. I'm only here to help!
Mario
I worked on behalf of HP. -
Boot Camp & Windows 7 -- "Standard VGA Graphics Adapter" (This is wrong.)
Hello,
I am hoping I can find some help here, I have purged the internet looking for a solution, all to no avail.
Heres the situation:
I have a 15" mac book pro unibody.
500 gb hdd
4 gb ram
9600m gt graphics
Anyways, I decided to install windows 7 on a partition I made using boot camp, hoping to play the new Dragon Age: Origins game.
Everything went well with the install, except for the graphics card.
When I open the device manager, this is what it says:
www.m2mlinks.com/cs445/images/Capture1.PNG
"Standard VGA Graphics Adapter"
Clearly wrong, clearly does not work with Dragon Age:
www.m2mlinks.com/cs445/images/Capture2.PNG
("Graphics card not supported for this game")
So I don't know what to do, here's what I HAVE done.
--I tried going to the nVidia website and downloading the latest driver for my graphics card, only to have it say this when I try to run it:
www.m2mlinks.com/cs445/images/Capture2.PNG
("There is no drivers in this package for the hardware on your computer")
--I tried going into Device Manage, right clicking Standard VGA Graphics Adapter, clicking properties->update drive->browse my computer->let me pick->picking my latest nVidia folder->picking 9600m gt from the list-> next. This looks like it starts to install, but then tells me that the control panel was not able to install successfully, so its REVERTING to the last working driver, uninstalling and restarting as I scream "Nooooooo!!".
--I tried changing the nvam.inf file, editing the device key value of the graphics I retrieved from running dxdiag, however when I ran dxdiag, it was the same device key as the one already in the nvam.inf file, so that changed nothing.
--Lastly (i just remembered this, I did this first), I tried downloading the latest BootCamp version (2.1 or something?), and this changed nothing as well.
I am severely exhausted and stressed from trying to get this to work, and I am in DIRE need of help, since one of the only reasons I put windows 7 on this was to play video games!!! Please dont let it be all for nothing haha.
Thanks for ANY help anyone can give me, I will answer ANY questions!!
~Nick
Message was edited by: Nick Thomas NTBoot Camp in Snow Leopard does not yet "officially" support Windows 7, but such support has been promised "before the end of the year." See: http://support.apple.com/kb/HT3920
Presumably the updated Boot Camp will support drivers not currently available, such as the appropriate video drivers. The end of the year looms and there is as yet no word about better support for Windows 7. Lets hope there are new drivers, as there are many others in your situation, although plenty of other people report they are using Windows 7 and Boot Camp. I prefer to wait for the official release by Apple.
Bob N. -
Problem about enabling GL Drawing.Any help,please?
Installed PhotoshopCS5 trial on laptop Vaio , XP Pro, service pack 3.
When setting preferences found that in Performance window, section GPU is dimmed and can not activate Enable GL Drawing .
The message in Description area is that Graphics hardware is not available and I need to upgrade video driver, possibly card.
Did try to find what video card is present in the laptop but the only info found in Search is that DirectX is installed plus number of files with odd names (I am not a techie).
So, I have no idea what video card is installed and what needs to be updated…
Is there any solution to this problem about enabling GL Drawing and what is it?
My trial time is running out and any simple to understand advise is appreciated!
Thanks in advance!
GloriaZeno is probably right in that your igp is too weak to support openGL, but if such is not the case, have a read here: http://kb2.adobe.com/cps/406/kb406921.html
-
VGA Graphics Adapter (code10)
Hi,
i have some problem with my hp pavilion dv3 2314-TX
the sleep option is greyed and can't be selected
the standard VGA Graphic Adapter cannot start (code10)
i've install the driver several time but still the driver cannot start and the sleep mode cant be enterer
please helpHi:
Until the graphics drivers are properly installed, sleep mode will not work.
This would the the graphics driver you should be installing.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-79517-2&cc=us&dlc=en&lc=en&...
If it is, then please click on the standard vga adapter in the device manager.
Then click on the Details tab at the top of the Standard VGA Adapter window.
Now you should see a Property drop down list and it is defaulted to Device Description.
Drop down on that and select the second item (Hardware ID's).
Post the top string of characters you see in the window. -
Standard VGA Graphics Adapter - DRIVER
Need help locating driver for Standard VGA Graphics Adater
Hardware ID: PCI\VEN_1002&DEV_9647&SUBSYS_169B103C&REV_00
Running Windows Vista
HP Pavilion G Series Laptop
64bit
Thanks in Advance!!!Hi,
Please try:
AMD High-Definition Graphics Driver
http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55032.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
I have two graphics cards in my PC . after I had to reinstall windows again has been slower pc and stuff not play 4k footage . Can you help me find out about it " Raks " graphics card has stopped working ?
I'm not aware of any, not to say that there aren't any issues.
it may have nothing to do with ntpd, there are a lot of things running.
ntpd just happen to make the log entry at the same time as the panic.
I would check to see if there are any updates available for you system.
if this is the first time that this has happened. it may be (pick one):
cosmic rays
sun spots
the trilateral commission
if this happens more frequently and that traces look the same, then
there may be a real problem that needs to be looked into further. -
Equium P200-1ED - have problem with installing VGA driver
Hello
I have problem with installing vga video driver, each time in installion it stops on
Version: 6,14.10,4833 and there is error poping up.........
Please help!Hello
What error message is it exactly?
Make sure that the chipset driver and SP2 is installed at least.
I had a similar issue that I cant install the display driver. The error message was something like the hardware is not supported
But it was very easy to solve this problem. I installed the driver via device manager. I have selected the graphic card and choose update driver. Then I did choose the advanced installation to choose the directory by myself.
Anyway, after restart the driver was installed and it worked. :)
Greets -
Standard vga graphic instead of intel hd
Hello.
I just brought a new laptop and i looked and i have standard vga graphic... i should have intel hd graphic....
They sayed to me dat i can play some of the new games i installed pro evolution soccer 2013 and it poops out
your computer does not meet the Minimum system requirments to run this software... Pixel shader 3.0
Sorry for my bad Eng...
This question was solved.
View Solution.Hi,
What is your computer and its Operating system ? Please check Device Manager to see what is it for example this is my loan machine:
Did you downgrade/upgrade the machine ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Problem with my amd graphic card
Hi.. I have a problem with my amd graphic card.. The card is amd radeon 6770m.. I did format on my laptop and when I tried to install the catalyst center which includes the driver, it displays a message which say that catalyst center stop working... I have downloaded all the versions of the driver since 2011 when I bought the laptop... But I have the same problem whichever version I try.. I also have updated the bios to the last version but nothing happens..I think maybe graphic card is broken.. Thanks for reading..
Hi @Lefteris93 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your I would uninstall all the software and drivers for AMD High-Definition (HD) Graphics Driver and Catalyst Control from the control panel and the Device manager. Restart the notebook and download from here.
Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system at the time of purchase. This will help update the drivers that have been installed on the Notebook. If you graphics card was damaged or not functioning you would have a black or blank screen.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
An old and difficult problem about "UnsatisfiedLinkError"
Hi dear all,
I have been struck with the problem about "UnsatisfiedLinkError". I have a c++ class HelloWorld with a method hello(), and I want to call it from within a java class. In fact, I have succeeded in calling it on the windows platform. But when I transfer it to linux, the error "UnsatisfiedLinkError" comes out. I have tried to take the measures as Forum has suggested, but it failed.
The source code is very simple to demonstrate JNI.
"HelloWorld.h"
#ifndef INCLUDEDHELLOWORLD_H
#define INCLUDEDHELLOWORLD_H
class HelloWorld
public:
void hello();
#endif
"HelloWorld.cpp"
#include <iostream>
#include "HelloWorld.h"
using namespace std;
void HelloWorld::hello()
cout << "Hello, World!" << endl;
"JHelloWorld.java"
public class JHelloWorld
public native void hello();
static
System.loadLibrary("hellolib");
public static void main(String[] argv)
JHelloWorld hw = new JHelloWorld();
hw.hello();
"JHelloWorld.cpp"
#include <iostream>
#include <jni.h>
#include "HelloWorld.h"
#include "JHelloWorld.h"
JNIEXPORT void JNICALL Java_JHelloWorld_hello (JNIEnv * env, jobject obj)
HelloWorld hw;
hw.hello();
All the files are in the same directory and all the processes are under the dirctory:
1. javac JHelloWorld.java
2. javah -classpath . JHelloWorld
3. g++ -c -I/usr/java/jdk1.3/include -I/usr/java/jdk1.3/include/linux JHelloWorld.cpp HelloWorld.cpp
4. ld -shared -o hellolib.so *.o
5. java -cp . -Djava.library.path=. JHelloWorld
Exception in thread "main" java.lang.UnsatisfiedLinkError: no hellolib in java.library.path
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1349)
at java.lang.Runtime.loadLibrary0(Runtime.java:749)
at java.lang.System.loadLibrary(System.java:820)
at JHelloWorld.<clinit>(JHelloWorld.java:7)
Tried another measure:
i) export LD_LIBRARY_PATH=.:$LD_LIBRARY_PATH
ii)java -cp . JHelloWorld
The same error came out as above.
I really don't know what is wrong with it.
Would you like to help me as soon as possible?
Thanks.
Regards,
JohnsonHi Fabio,
Thanks a lot for your help.
It is very kind of you.
Regards,
Johnson -
A problem about calling Labview vi in VB
Hi all:
I meeting a problem about data transfer and parallel operation between VB and Labview.
Actually, I want develop a VB program, in which, the Labview VI can be called and corresponding parameters can be transferred to Labview. and then, I also can operate my system by VB program at same time. something like parallel operation (VB and Labview program).
But the question is :
1. If I use "Call" method of ActiveX in VB, and the LabVIEW subvi is not stopped (for example, a loop structure), I can not do parallel operation on VB program. The error message is "other application is busy" which is attached below. The sample codes is also attached.
2. I tried to use other methods like "OpenFrontPanel" and "Run", but I am not sure how to transfer the parameter??
3. Then I tried to use "SetControlValue" to set the parameters, but there is a error " := expected", which is very strange, because the statement I wrote is followed with the help documents [ eg: VI.SetControlValue ("string", value)], why it is still need a "=" ??
Does anybody know something about it? Thanks a lot
Message Edited by hanwei on 11-07-2008 03:18 PM
Attachments:
vb_labview_error_message_1.JPG 14 KB
VB_to_LV.zip 10 KBI sure hope OP has solved it by now.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV -
hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus
Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support. -
Problem about Handling of Empty Files in File Adapter
Hello everyone,
NetWeaver 2004s --- XI
In Sender i have a File Adapter.
Now i meet a problem about Handling of Empty Files. When i send empty file, but don't cerate a leer message.
I have seen following text in help document. But in adapter configuration i can not find the correspond parameter.
can you give me some tips?
Thx in advance
best regards
Yaning
SAP Help Document über File Adapter
+Handling of Empty Files
Specify how empty files (length 0 bytes) are to be handled.
○ Do Not Create Message
No XI messages are created from empty files.
The files are processed according to the selected Processing Mode.
For example, if the processing mode is Delete, empty files are deleted in the source directory.
○ Process Empty Files
XI messages are created with an empty main payload.
The files are processed according to the selected Processing Mode.
○ Skip Empty Files
No XI messages are created from empty files.
Empty files are skipped and remain in the source directory.+
Help Docuhi,
it's available since Sp19 for XI 3.0
and the corresponding SPS fpr XI 7.0
http://help.sap.com/saphelp_nw04/helpdata/en/44/f565854b7341e6e10000000a1553f6/frameset.htm
so probably you need to install the new SP
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions"><b>XI / PI FAQ - Frequently Asked Questions</b></a>
Maybe you are looking for
-
Storage other files 65GB MacBook Pro
I have on my MacBook Pro found the other files on the 65GB what are thesefiles and what do I find them? Once you find them how do you know which to delete? Pleace help me!!
-
Conversion of variable character error
I use this statement within a query to get a blank result with a WHEN/THEN statement but keep getting the following error message: " The conversion of a varchar data type to a datetime data type resulted in an out-of-range value." Below is the state
-
Hardware specs: Processor: Intel® CoreT i7-4710MQ, 6MBL3 Cache, 2.5-3.5GHz Memory: (8GB) 8192MB, PC3-12800/1600MHz DDR3 - 2 SO-DIMM Graphics Card: NVIDIA Quadro® K1000M 2GB DDR3 Hard Drive: 500GB 2.5" SATA3 Hybrid w/ 4GB NAND Flash Operating System:
-
Hi, I can't open my ipad. it is saying (ipad not backed up) this ipad has not been backed up, backups happen whenwhen this ipad is plugged in , locked and connected to wi-fi Ok. Iv'e connected to itunes and backed up. but It won't let me clear the b
-
Breadcrumb returning always to first stacked detail group
Hi, Inside a dummy view group (say Dummy1) I have implemented stacked detail groups containing table-forms. The main page looks like below when I select Dummy1 Dummy1|Dummy2 Tab1|Tab2|Tab3|Tab4 After I select let's say Tab3, the corresponding table a