Problem about start RAC when hosts start
every time ,when i start hosts, crs will start RAC automatically,but some resource of RAC will be 'UNKNOWN' ,i need stop all resource and start again use srvctl
is there any better method to solve the problem?
other way
A.
a. $crs_stat
b. $crs_stop <copmonent_name>
c. $crs_start <copmonent_name>
B
a. $crs_stop -all
b.$crs_start -all
Similar Messages
-
Some times my new iMacs display start flickring when I starts playing a game. I am very annoyed. I have bought it only 1 month ago. What can I do?
A flickering display sounds to me like a hardware problem. Or does this only happen with a specific game? Of course your machine is still under warrantee so you could take advantge of it if you have a local apple store.
-
MacBook Pro doesnt start. When I start my lap top, it shows the apple and the line uploading but it only goes like to 1/3 and then it goes blank for some seconds, then it turns off by itself and turn on again and happen the same, apple logo, line .. the noise like-fan going on, then turn off and turn on again. Tried starting holding option command P and R key and didnt work either. Starting to think I have lost all my data inside
Try a SMC reset.
http://support.apple.com/kb/ht3964
It might be helpful if you indicated the exact model/year of your MBP. Are you running Lion OSX?
Ciao. -
In Lion, running on an I MAC, (late 2006), how can I stop certain programs (iTunes, Word) from automatically starting up when I start the computer?
Any application that is open when you shut down will re-open when you restart unless you deselect this when shutting down/restarting:
Also check System Preferences>Users & Groups>Login items tab and make sure there's nothing listed there that you don't want launched. -
How do I make it so that itunes doesn't start automatically when windows starts?
How do I make it so that itunes doesn't start automatically when windows starts?
http://support.apple.com/kb/HT5449
http://support.apple.com/kb/PH11443
http://support.apple.com/kb/PH11428 -
How do I make Firefox start up when I start my computer?
Is there a way to have FF start automatically when I start my pc?
ty,
magvanPersonally, I use a Firefox preloading software that loads the Firefox program in the background without fully launching it. The <code>firefox.exe</code> process will continually run. This boosts the Firefox startup time.
<b>@jscher2000</b><br>
I am not sure if the startup folder method is still supported.<br>
I was just going to have magvan add the <code>firefox.exe</code> as a scheduled task set to run on the computer's startup. -
how to solve illustrator cs6 save as cs5 problem about the stroke(when the stroke with clipping mask and color is gradient, save as cs5 will change to embed ).
Because it was not possible to apply a gradient to a stroke in CS5. When you open the file in CS5, it is reduced to something that can be rendered in CS5.
-
My MacBook Pro will not start. When I started it goes to a gray screen with the Apple logo and has the spinning dial. When I started in safe mode it will not start. In safe mode it as an error message that says MacBook Launch_msg(): Socket is not connected
If running 10.7 or later hold down Command-R at Startup.
This should invoke recovery Mode.
Choose Disk Utility.
Select your Hard drive. Inspect the SMART Status in the lower right of the window for "Verified".
Select the Mac OS X Volume (originally Macintosh HD) click (Repair Disk)
If errors, run again until it comes clean or gets stuck.
Report any error messages. -
IPhoto starts automatically when i start my computer!
iPhoto starts automatically when i start my computer, how do i turn this off?! I have a lot of photos on the program so it takes a while to load and bogs down my startup.
Right-click on the iPhoto icon in the dock, and deselect "Open at Login".
Also a handy trick if there ARE programs you want started when you login -
I have word, iTunes, and other application that starts automatically when I start my laptop and how can i change start up options?
Go to System Preferences / Accounts - Login Items.
In order to make changes, click the lock icon bottom left corner of the pane. You may be prompted for your admin password.
Select the apps you don't want to launch on startup then click - (minus). -
BEx Analyzer - Start BEx when Excel starts
Hi,
Our company uses MS 2010. We recently installed BEx Analyzer to several employee's PCs. On ONE out of 5 PCs, the user must re-check the box under Global Settings for "Start BEx Analyzer when Excel starts" every time she starts her PC each day. It stays checked until she shuts down the PC. What could be wrong? What should I look at?
Thanks,
Debbieso at the end of day when she shuts off and log in again analyzer doesnt open in excel again.?
there is way to do that in excel to open a program .. may be they can help.
only thing i can think of that she deletes her cookies when she logs off so excel cant save it properly.
http://office.microsoft.com/en-us/excel-help/customize-how-excel-starts-HP005199391.aspx -
Linux crashes after about 5 minutes (when I start Xorg)
Hello,
my linux-system hasn't been stable a lot during the last couple of weeks, ... or even since I used linux on my system. Only once, when I used a specific version of the nvidia-drivers as my system really stable. Mostly, it was stable enough to use. Maybe I'm wrong, but that is my impression at the moment. I have to say that my chipset (via kt133 I think) or the implementation of it, can have a problem which causes this instability.
Anyway, the last time, it was only the screenimage that stopped working. Sound, ... kept on going, so I supposed it was an xorg-problem ...?
However, since the last archlinux kernelupdate (and I also tried my own custom-kernels with 2.6.16.x as the base-kernel), linux crashes very quickly as soon as I start xorg and my internet-connection (but it happens also without my internet-connection up it seems). This time, also the music stops playing.
Now, I heard of cases where Xorg starts using 100% cpu, but I can't login with ssh or so, although there may be others possibilities.
I notice that when my screen, ... freezes the led of my harddisk is ona nd stays on.
I'm not sure about the following. I once enabled logging and got some output on a vt. I thought that ther system frooze (my harddisk light was on it seemed) and some moments later my system went on working. I'm not sure if this is the same as what I experience most of the time, since it doesn't seem to come out of it (or maybe I haev to wait longer ...). Anyway, I got:
dmastatus=0x61
DMAXxxx error
status=0x58
DriverReady SeekComplete Datarequest failed
opcode was unknown
My Question: Does anyone else experience these instability-problems with the latest kernel?
I may compile xorg myself and wee what it gives ...
thank you and greetings,
MichelDriveReadySeekComplete errors are either:
- IDE controler failure
- Bad cables
- Bad harddisk
Out of these 3, the last one sounds the most reasonable with nowadays harddrives. And yes, your system will hang when all your important processes are hanging while trying to do disk I/O.
What windows does is switching back to PIO mode and never report anything, until you hit the nice BSOD telling you to replace the floppydisk in drive C... -
Problem with explorer.exe when LR starts
When starting LR (V1.0) the task manager reports that explorer.exe is eating up about 50% of my CPU. Closing LR does not have an effect. Only a re-start clears it up. This is now the second time I have installed LR as there was a conflict the first time I upgraded from the beta 4 version. I have searched through many of the same folders that my LR library uses with Bridge and Windows explorer and there was no problem with explorer.exe. Only upon starting LR does the problem occur. Any advice much appreciated. Thank you!
Windows XP Media Center Edition SP2
Pentium 4 3.2 GHz
2 GB RAMFirefox 2.0.0.20 is the last ever version of Firefox for Win98 / SE / ME.
You can try KernelEx to get Firefox 3+ to work, but it would be very slow with an old PC of less than 750Mhz.
http://sourceforge.net/projects/kernelex/ -
Having sound delay by about 5 seconds when I start any video stream, know how to fix?
From any app or mail, when I click for a video to start, it will start immediately, the sound will not start until about 5 seconds later, very annoying. Does anyone know the fix for this?
Listen to this person, he knows exactly what he's talking about. My unit had the freezing problem, the visual artifact problem, and eventually would only show a blank white screen after I had tinkered too long. Luckily I have another computer that I hadn't yet upgraded to itunes 7 and it had the last firmware upgrade before the itunes 7 one. From disk mode I was able to restore it to the previous firmware version, and now the ipod works perfectly.
I too am almost disqusted with Apple for 1) missing this problem and 2) not letting people know!
I wonder how many more people are going to have lots of problems so apple can protect their PR.
Anyways, what would be really helpful would be if someone could upgrade the latest firmware installer before itunes 7 (it's an individual ipod updating program, not itunes 6.xx)somewhere on the internet so users could download it and do away with this evil 1.2 firmware. -
Every time I try to open itunes I get the typical windows message that says "itunes has encountered a problem and needs to shut down." I've tried to reinstall, but it still does it. Any ideas?
hiya!
Itunes has encountered a problem and needs to
close
the first thing that i check for when people report
getting that message when they try to launch
their itunes is a broken QuickTime.
try to open your QuickTime. does it launch properly,
or do you get an error message?
if you get an error message, the first thing we'll
try is a careful standalone QT 7.0.4 reinstall.
download and save a copy of the QT 7.0.4 standalone
installer to your hard drive. (we'll run the install
from there rather than online.) switch off
antivirus and antispyware applications prior to the
install.
Quicktime 7.0.4 Standalone Installer
if that install goes through okay, does your itunes
launch properly again?
(if you get an error message on the QT standalone
reinstall, let us know what it says. include error
message numbers if you're getting any.)
love, b
That was it. You're my hero!
Love you too,
JRD
Maybe you are looking for
-
BAPI or FM or Class for Customer open items CLEAR (F-32)
Hi Everyone, Is there any BAPI or FM to CLEAR customer open items (F-32). Thanks, NK
-
How to print CWiGraph control in white background and different font?
I have a CWiGraph control in dialog. I look at your example for printing the CWiGraph control, but I don't want print the exact image like showing on the screen, I like to print the graph in white background, not the same color like graph frame and p
-
Hi all, I have an HP Scanjet 6200cs I got a few years ago to work with my Dell. I want to try and use it with my Mac Mini. I have tried to plug in the device into the Mini but it will not recognize the device and far as I can tell there is no Mac dri
-
HT201412 Ipad2 doesn't work since IOS8
What options are there for my IPad2 since the IOS8 update. It is slow in every area. Slow to turn on, slow to slide from screen to screen, apps constantly crash. I can't even do the newest 8 update because it crashes during the process. Apple has
-
Can't Modify WCS Report File Destination
Once I upgraded to WCS 6.0.132.0 I can no longer change the destination file location when I run reports. The reports seem to run on schedule but they end up in the default location of C:\WCSFTP\reports\. I would like to change that to my E: where I