Problem accepting updates. Get a message "no valid sequence could be found."

Automatic updates are not working. Get a message "No valid sequence could be found">

If you are on Windows, download & run http://labs.adobe.com/downloads/acrobatcleaner.html
then install the latest Reader version from http://get.adobe.com/reader/enterprise/

Similar Messages

No valid sequence could be found for the set of patches adobe acrobat x standard (10.1.3)

I have tried updating and/or repairing Adobe Acrobat X standard but receive the error message "no valid sequence could be found for the set of patches" I am using adobe acrobat x standard (10.1.3) running windows 7.The software came pre-installed and so I have the CD key but no CD. Thanks Nick

Hi Anoop.
I have tried the Help>Check for updates option and receive the same error message accompanied by error code 1648 (not sure if this helps). I have tried Help>Repair & Control Panel>Repair and receive the same "no valid sequence could be found for the set of patches".

No valid sequence could be found for the set of patches."adobe 10.1.1"

Tried to up grade when I was asked to a while ago and when I did nothing would work, so I uninstalled the old adobe reader and tried again and got the message " no valid sequence could be found for the set of patches" the download continues and says it has installed but it hasent. everything I use needs adobe reader for me to see statment's etc so I cant get any thing to work I tried removing everything I could belonging to adobe and tried to install again but this just keeps happening. im running on windows xp 32 bit its just a home computer.
Please can you help me.

The following article while old fixed the issue for me. Registry editing is required so please backup your registry before making any changes.
http://support.microsoft.com/kb/913754
A reboot was required before reinstall of Reader succeeded.

Cannot update. Get error message 1648, "no valid sequence could be found for the set of patches."

Cannot update. Get error message 1648, "no valid sequence could be found for the set of patches."

Uninstall the corrupt Reader version using http://labs.adobe.com/downloads/acrobatcleaner.html then download and install the latest Reader from http://get.adobe.com/reader/enterprise/

No valid sequence could be found for the set of patches

I get the following error message when installing Acrobat 8.0 Standard:
"Windows Installer" No valid sequence could be found for the set of patches."
The CD installed with no problems on another PC. Both PC are running XP Pro SP2. The virus scanner was disabled before installation. I also had uninstalled a older version of Acrobat and Reader before installation. Even attempted to install by launching the setup.exe file.
Thanks.
George

This appears to be caused when nls codepages are missing from Windows..
I use nLite to clear items out of my installations, and because these entries are missing, it fails to install. Apparently Microsoft Office has the same issue..
I don't have a solution yet, but I am searching. This should help Adobe answer the question, though..

HP Scanjet G4050. Get "Error 1706.No valid source could be found for product ScannerCopy...."

I just bought a new Scanjet G4050 and when I try to install the software I get an error message and the software will not install. Error message is:"Error 1706.No valid source could be found for product ScannerCopy. The Windows Installer cannot continue." During the install, I was prompted to enter a CD or other location to load ScannerCopy.
I had an older version of this same Scanjet G4050 working on my PC about a year ago. My PC is running Vista 64.
Any ideas how I can get the software to successfully load? Any ideas of where I can get this "ScannerCopy" that the software is asking for?

Remove your current installed Reader using http://labs.adobe.com/downloads/acrobatcleaner.html
then download and run the full installer from http://get.adobe.com/reader/enterprise/

Acrobat X Standard "No valid sequence could be found for the set update. Error 1648"

I'm getting this error trying to install an update.
I followed this process:
1. Cleanup Acrobat (http://labs.adobe.com/downloads/acrobatcleaner.html).
2. Delete everything from C:\ProgramData\Adobe\ARM
3. Delete C:\Windows\Installer\10e2413d.msp
[I didn't do this step. No file with this name exists in this folder. I know it's hidden. I can see the folder and a bunch of other files].
4. Install Acrobat X Standard.
The install went perfectly. The update did not. Tried twice, including reboots.
Any help is appreciated. But I have no technical knowledge. Easy, step-by-step instructions please.
PS Windows 7, Office 2013, Intel i7, 8GB RAM, system is running excellently... except for this.
Thank you,
Thomas Scott

Bill and all,
I tried the steps I outlined above for the third time, more carefully going step-by-step and a reboot between each. The update installed this time.
I was using the update from Help > Check for Updates... Is that the right way to do it?
Good idea on the anti-virus. I have Microsoft Security Essentials. It's never interfered with my Adobe Acrobat or Photoshop updates before. But certainly can't hurt to turn that off to be sure it's not causing a problem this time.
I just did a reboot and selected Help > Check for Updates... again. No updates available and running 10.1.9. So it went to the latest update all by itself.
Thanks for the advice. I'm replying here for that and so others with the same problem may have one possible solution.
Sincerely,
Tom Scott

Reader 10.1.1 install error--"No valid sequence could be found for the set of patches."

At 96% completion of Reader install Windows gives above error msg. I close that window, then new window says "Installation complete." I click finish. New window opens with "Installation successful - you are now running Adobe Reader." Yet Reader does not show up as installed; unable to open pdfs. Thanks for any help.

Solution provided by pwillener on similar problem was tried. Reader downloaded, installed and seems to be working fine now............. Many thanks !!

I am getting an error message that "no photos could be found on this device" when I plug in my ipad to my windows 8. I open the dcim folder and it shows up empty, although I clearly have photos on my ipad. I was able to do this just last week. HELP!

Help, I am trying to get my pictures from my ipad to my computer (windows 8) and I get the message that "no photos could be found on this device." When I try to open the dcim folder, it shows up empty. What can I do? I have previously been able to import pictures easily.

Hi, I had the same problem. I finally figured it out. Plug in the USB cord to your ipad, but beofre plugging it into your computer make sure your ipad is not in the locked or sleep mode. Once I did this, my photos showed up and started downloading. Hope that helps you!

ISQL*Plus: Internal error (no valid library could be found)

I install iSQL*PLUS on middle tier (9i AS 1.0.2.1) according to documentation, when I trying to connect I am getting Internal error (no valid library could be found). The TNSNAMES.ORA file is correct.
Any suggestions will be highly appreciated.

My first suggestion is to use the HTTP listener on the RDBMS bundle. This is what iSQL*Plus 8.1.7 Beta was built for.
The HTTP servers on the iAS and Database releases require mods to be compiled differently.
- CJ

I am trying to back up my new iPhone after downloading/updating iTunes with iCloud. I get this message: The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permiss

I am trying to back up my new iPhone after downloading/updating iTunes with iCloud. I get this message: The required file was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permiss
how do I find the file and replace it or install it?

I'll reload it tonight when I get home...basically, I bought a new iPhone and downloaded some new medical apps. also had to download an update for iTunes into my mac laptop so I could access iCloud (which was NOT on my prior iTunes software)
When I synched my new iPhone with the newly downloaded iTunes, I registered my iphone and tried to "back it up" to iCloud and the message indicating that "the required file was not found or has a permissions error...." popped up.
How do I correct the permissions error, or...am I able to do this somewhere? Or...how do I find the file that is missing?
Dr. Bob001

Ical problem already 3 weeks after the update, get the message every time username or password is incorrect as I do with this password and username in mobileme bowl. now get the message The server responded with \ 'HTTP/1.1 409 Conflict \'. can someone he

Ical problem already 3 weeks after the update, get the message every time username or password is incorrect as I do with this password and username in mobileme bowl. now get the message
The server responded with \ 'HTTP/1.1 409 Conflict \'.
can someone help me

Ical problem already 3 weeks after the update, get the message every time username or password is incorrect as I do with this password and username in mobileme bowl. now get the message
The server responded with \ 'HTTP/1.1 409 Conflict \'.
can someone help me

HT204053 In iCloud setup my apple I'd is not accepting. Getting error message it should be an email I'd, but my my apple Id is just in user I'd form? Please support.

In iCloud setup my apple I'd is not accepting. Getting error message it should be an email I'd, but my my apple Id is just in user I'd form? Please support.

I've tried both. First, I tried on my pc, where iTunes had installed iCloud when it last updated. I have iTunes installed on this computer (and on my iPad and iPhone), but that wasn't the issue.
So I went online, thinking I needed a separate iCloud Apple ID, but it prompted me for my current Apple ID and gave me the message about my ID being "valid" but not an iCloud account," which, lol, was what it had asked me to do in order to create one. I checked, and at least one other user is having the same issue. I'll attempt to copy/paste the Support request url: https://discussions.apple.com/thread/4430653?tstart=0
Thank you for any help you can give.
Trish

Updated itunes and getting errors messages: iTunes.exe-Entry Point Not Found

After updating itunes, I get the message iTunes.exe-Entry Point Not Found. The procedure entry point AVCFPlayerEnableHardwareAcceleratedVideoDecoderKey could not be located in the dynamic library AVFoundationCF.dll.
Then another error message tells me: iTunes not installed correctly. Please reinstall. Error 7 (Windows error 127). I've tried to repair which looks successful until I try the desktop shortcut as well as going into the exe file in program files. Still the same message. Operating a windows XP service pack 3 with 32 bit. Help would be most appreciated.--No problems with itunes until this recent update.

iTunes.exe-Entry Point Not Found. The procedure entry point AVCFPlayerEnableHardwareAcceleratedVideoDecoderKey could not be located in the dynamic library AVFoundationCF.dll.
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

Trying to restore/update 3rd gen ipod touch - keep getting error message - THe ipod touch could not be restored. An unknow error occurred (-1). Please help.

Please Help..
Trying to restore / update ipod 3rd generation - keep getting error message - The ipod touch could not be restores. An unknown error occurred (-1).

Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
The "device may need service" means a hardware problem. in that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Problem accepting updates. Get a message "no valid sequence could be found."

Similar Messages

Maybe you are looking for