Problem accessing em via browser

Hi,
Anyone know what the problem? I got the error message from the sysman/log folder. Anyone know where i can find the documentation of the setting up of oem?
Beside starting the dbconsole service, what others services and things need to be started or done before i can use em via browser. (http server, any agents, set up repository)
Currenlty I managed to load the http://<host>:5500/em page. Although the database instance is already started up, the web page still indicate that the db instance is down and need to be started up.
Check the sysman/log folder and found the below error message from the trace files. Anyone know what the problem?
2005-03-28 12:47:44 Thread-5 ERROR command: nmejcn:
received no status header from epository at
http://slasun11:5501/em/upload/ sponse header from repository
Thread-810 ERROR pingManager: nmepm_pingReposURL:
Did not receive a response header from repository

According to http://support.apple.com/kb/PH2618 you should be able to access it via a browser by going to https://www.icloud.com/#mail

Similar Messages

Problem accessing mail via Safari browser

How do I access iCloud Mail via my Safari browser on my iPhone? If I go to iCloud.com it just offers me the option to install it on my phone.
The problem is, I already have it installed on my phone and it works fine EXCEPT at my new job - the wifi is not very good and I can access internet/Facebook etc but every time I try and load email it always says it 'cannot find the server .' I therefore tried to access email via safari browser - my other email provider works fine that waybut iCloud doesn't even give me the option to login, just keeps suggesting I install it.
Any ideas how I can check iCloud email at work? Can't do it on work computers, site is blocked....and there is no 3G/4G signal.
Thanks for any advice!

According to http://support.apple.com/kb/PH2618 you should be able to access it via a browser by going to https://www.icloud.com/#mail

Problem accessing LDAP via sqlnet

Hello,
I have installed OID 10.1.2 for accessing targets databases in 9.2, with oracle enterprise user, and that run correctly when I access to the taget database in local.
If I use sqlnet I receive the error 28030!
If someone have an idea!
Thanks

ORA 28030
Text: Server encountered problems accessing LDAP directory service
http://www.oracle.com/technology/products/oid/oidhtml/sec_idm_training/html_masters/handson.htm
or
did you see the How to set up Enterprise User Security
http://www.oracle.com/technology/deploy/security/db_security/howtos/eus-how-to.html
regards,
--Olaf

Problem accessing VIP via HTTP from service servers

I thought I had a pretty simple config on my CSS11501- but have run into an issue I'm having trouble resolving.
I have two unix webservers (IPs are .99 and .100) on ports e1 and e2, and my uplink for the CSS is on port e8.
The CSS has a VIP address (.105) that load balances HTTP requests to .99 and .100.
From .99 and .100 I can ping the VIP address - and from outside the CSS - almost everything works great for the site I'm hosting on .105.
I do have two web pages however that attempt to make calls directly to the VIP address - I noticed I can't load those pages.
Nor can I just browse the website on the VIP address from either of the servers. The webservers can browse their own pages via IP, and each other's pages via IP.
Just not pages on the VIP.
I think it may be a case of the servers thinking that IP spoofing is occurring - or maybe I missed something simple in the config.
Here's what I see in a 'show flows' when I try and browse the VIp address (.105) from the .100 server.
Src Address SPort Dst Address DPort NAT Dst Address Prt InPort OutPort
65.207.212.100 53758 65.207.212.105 80 65.207.212.100 TCP e2 e2
65.207.212.100 80 65.207.212.100 53758 65.207.212.100 TCP e2 e2
Since it appears that the CSS NATs the request to the same IP the server is using, will the reply from the server ever make it back to the CSS?
Or does it think that it shouldn't need to reply - becauuse it is that IP?
Should I be able to browse the VIP site from the webservers.
Below is the full CSS config if someone can help me figure this out.
Thanks in advnace for any and all help.
Paul
CSS11501# show run
!Generated on 08/30/2005 12:08:11
!Active version: sg0750004
configure
!*************************** GLOBAL ***************************
no restrict web-mgmt
acl enable
logging subsystem acl level debug-7
ip route 0.0.0.0 0.0.0.0 65.207.212.1 1
!************************** CIRCUIT **************************
circuit VLAN1
ip address 65.207.212.104 255.255.255.0
!************************** SERVICE **************************
service www2
keepalive type tcp
keepalive port 80
ip address 65.207.212.99
active
service www3
keepalive type tcp
keepalive port 80
ip address 65.207.212.100
active
!*************************** OWNER ***************************
owner WWW
content rule1
vip address 65.207.212.105
add service www2
add service www3
port 80
protocol tcp
advanced-balance sticky-srcip-dstport
active
!**************************** ACL ****************************
acl 1
clause 10 permit any any destination any
apply circuit-(VLAN1)

Paul,
simple config and well-know basic mistake :-)
If a server tries to access the vip, the css will forward the request to the same server or the other one.
Both ways, the response from the server will go directly to the client-server, bypassing the CSS.
For this to work, you need to do client nat so the server making the HTTP connection appears to be coming from the CSS.
Create a group like this
group servernat
vip addr 65.207.212.105
active
and add the following to your acl
clause 5 permit any 65.207.212.99 destination content www/rule1 sourcegroup servernet
Do a similar clause for the 2nd server.
re-apply the acl.
Everything should work now.
Gilles.
Thanks for rating.

Firefox 29.0.1 Cannot view download in progress, nor access downloads via browser

I am running Firefox 29.0.1 in a Windows OS. Up until a few days ago, the grey arrow (green when downloading) worked fine, dropped down a menu that showed recent downloads, and allowed me to access them. Now I find I cannot do this. I would prefer to use the native "download button", but am open to suggestions if this is not possible.

You can check for problems caused by a corrupted localstore.rdf file.
*http://kb.mozillazine.org/Corrupt_localstore.rdf
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Problem accessing files via Blackberry Bridge

Not sure if anyone is having this issue....I've got the blackberry bridge installed, and I can access my messages, contacts, etc. However if I go into the Bridge Files menu, I am unable to open anything. I tap it and it just does nothing. If I go into the sheet to go app on the Playbook, I am able to access my files off my blackberry, however every single one opens up read only (which kinda defeats the purpose)
Any ideas? Is there a setting I am missing?
Jason

not a bug but as designed. From Blackberry:
Supported file types when using Bridge Files on the BlackBerry PlayBook tablet
Article ID: KB26606
Type: Support Content
Last Modified: 04-18-2011
Product(s) Affected:
BlackBerry® Bridge
BlackBerry® PlayBook™
Overview
When a BlackBerry smartphone is connected to a BlackBerry PlayBook tablet using BlackBerry Bridge, Bridge Files allows access to the files located on the internal memory of the BlackBerry PlayBook tablet, or from the MicroSD card of the BlackBerry smartphone. The following file types are supported using Bridge Files:
Adobe® Reader® for opening PDF files
Documents to Go® for opening XLS, XLSX, DOC, DOCX or PPT files
Environment
BlackBerry® Bridge
BlackBerry® PlayBook™ tablet
Bridge Files

Using iPhoto 11 under Mavericks and want to buy to buy a Book, I receive error message saying 'Cannot access Apple Store, try later', but I have not problem accessing store via iTunes or directly. Any advice?

Getting error message when trying to buy my book 'Cannot access Apple Store, please try later' Anyone experienced this?

Here's a fix that worked for some users:
Make sure this checkbox is checked in the System/Sharing preference pane:
If it is, uncheck it and then recheck and try ordering again.
OT

Accessing Outlook via browser?

I access my work MS Outlook e-mail through Safari (on my iMac) when at home by logging in to a website. It works great!
However, one would think that since the i

Dude you were just about to reveal the secreat to your success and you trailed off in mid sentence. Is anyone else worried about this guy?? Did you suffer a heart attack? Was there a home invasion? Did you fall out of your chair? Did you figure out the meaning of life?
The only thing missing was ... after your last word. We are praying for you.

Can't access NAS200 via browser

All was working fine until yesterday when I (unsuccessfully) tried to set up a ftp option. Now trying to reach the NAS200 web interface, I get a "The connection was reset. The connection to the server was reset while the page was loading" error message.
I running under Windows 7 Pro with static ip address. All other functions of the NAS200 are working, e.g., drive mapping, etc. I've reset the system, reassigned the static ip address, and everything else I can think of. The setup utility correctly identifies the NAS20 and its assigned ip address. The only think I did to get into this situation is play with the ftp option. How can I undo the damage. Thanks for any help.
Gene

gene7 wrote:
All was working fine until yesterday when I (unsuccessfully) tried to set up a ftp option. Now trying to reach the NAS200 web interface, I get a "The connection was reset. The connection to the server was reset while the page was loading" error message.
I running under Windows 7 Pro with static ip address. All other functions of the NAS200 are working, e.g., drive mapping, etc. I've reset the system, reassigned the static ip address, and everything else I can think of. The setup utility correctly identifies the NAS20 and its assigned ip address. The only think I did to get into this situation is play with the ftp option. How can I undo the damage. Thanks for any help.
Gene
I suggest, you try using another internet browser and another computer. You may also try turning on/off the NAS200.

Portal not accessable via browser as inside sapmmc - http provider is red

Hi Experts,
I am very new to NW admin side and currently my client is facing an issue while accessing portal via browser.
Problem: Some times suddently when users try to access production portal it takes a lot of time to open up and in most cases it doesn' t get opened up at all. To check what' s wrong with the portal i access sapmmc and inside their i find under current status -> ... -> services -> http provider -> total requests in red status with a description as avg request - response time last reported value above threshold limit. It will be the same case under open alerts too.
My server configuration is:
SAP-JEE = 7.0SP14
OS = Windows 2003 (X86) 5.2
Server Version = 1.4.2_17-bo6
Kernel Version = 7.00 patch level 109886.44
Server = 32 bit
RAM = 16.00GB
Processor = Intel(R) Xeon(R) CPU E5450 @3.00GHZ (8CPUs)
Heap Size: 1024 MB
Approximate number of users = 500 - 600
Currently to solve the issue, we give a reboot to server. But with the progress in time the frequency is getting increased drastically (approx once in 2- 3 days).
Any pointers on how to solve this issue will be greatly appreciated.
Thanks In Advance,
Vipin.

Hi all,
Thanks for your valuable inputs!
Now the issue seems to end up by raising an OSS notes with SAP and i have been given responsibility to prepare a doc that needs to be submited to SAP.
I have already got the screenshots from SAPMMC on it' s status and all, but also requires log information specific to the reason behind this behaviour. Can i know where the log information specific to such issues gets logged and all the necessary information that i need to document to raise an OSS.
Inputs with be of great help and will be highly appreciated.
Thanks In Advance,
Vipin.

Can't Acces VM neither via browser nor ssh

I have one instance of gitlab created via vm-depot and it was wornking very fine for some months. Then it suddenly stopped. I can't access it via browser and ssh neither and it has a lot of important projects saved that i don't wanna lose. I checked the
endpoins and they are ok. I also tried to reboot and set it to a smaller size but it did't work... I don't know what to do, please help me.

Hi,
You might want to recreate the VM by deleting the existing VM and retaining the attached disk. You can then attach the same to the new VM.
Recovery Steps can be Scripted or Manual. To perform the same, suggest you to have a look at the below article
http://blogs.msdn.com/b/mast/archive/2014/11/20/recovering-azure-vm-by-attaching-os-disk-to-another-azure-vm.aspx
Hope this helps !
Regards,
Sowmya

Error in trying to access my FORM via browser

Hi, I am new to Oracle Application Development, as a starter I created a sample form in Form builder and compiled it, let say TESTFORM.fmx
I have placed this file in [ C:\DevSuiteHome_1\forms ] as my default location in "default.env" file is this only.
Then I created a tag in "formsweb.cfg" as:
#ETA Report
[TESTFORM]
envfile=default.env
form=TESTFORM.fmx
userid=i-----r/i----r@xii
widith=1500
height=600
imagebase=codbase
archive_jini=frmall_jinit.jar,colorpicker.jar,keyfilter.jar,my_icons.jar
archive=frmall.jar
When I try to access it via my browser [IE6] by going to link: http://pptaw0054.lotte-ppta.com:8889/forms/frmservlet?config=TESTFORM
A grey box of 1500x600 is shown with an error shown in the center: java.lang.ClassNotFoundException: oracle.forms.engine.Main_
Can anyone please help me out with the problem.
Thankyou!

Hi Check these -
1. Check these URL's are working
http://pptaw0054.lotte-ppta.com:8889/forms/frmservlet
http://pptaw0054.lotte-ppta.com:8889/forms/lservlet
2.If Webutil installed? Then do proper configuration for "WebutilArchive"
WebutilArchive=frmwebutil.jar,jacob.jar
3.If Jinitiator is used,check if all corresponding jar files are downloaded onto user machine.Because all required class as shown in the error are there in jinitiator jar files.Also check all jar files that you have mentioned in archive_jinit are downloaded onto user machine.
DO like this if using webutil archive_jini=frmall_jinit.jar,colorpicker.jar,keyfilter.jar,my_icons.jar,frmwebutil.jar,jacob.jar
4.Enable all activex settings of your browser and do a proxy bypass setting in the browser as well..
5. Check if you have download rights for downloading JAR files mentioned in archive_jini
Edited by: anandk on Jul 24, 2012 1:18 PM

Problems accessing the internet via wifi

I'm not able to access internet via wifi but am connected to my wifi network.
No problems when using 3G
I guess it is a dns problem?
when i check the wifi settings IP address and subnet mask
have details but is blank for router, dns and search domains.
What details should I input there?
Would it mess anything up if I used the same settings that my iphone uses?
I know wifi is ok because I can download books to my ipad with stanza using wifi.
Sorry don't know too much about this sort of thing
dianne

diannef wrote:
yes IP address begins with 169
HTTP proxy is set to off
I am using a Time Capsule.
Have a macbook pro
and two iphones connected with no problems
Is their a limit to no. of devices that can connect?
Yes, this would be determined by the size of the IP pool allocated on your time capsule router. Ordinarily this should be large enough by default to accommodate the number of devices you have.
Not sure where to check
"If DHCP is not working for you then you should check to see if your router is set to do DHCP and that MAC address filtering is not turned on"
*First, please note that if you aren't really familiar with network setup you should probably give Apple support a call and they can walk you through this.* See: http://www.apple.com/support/expert/
You can access your Time Capsule router using the Airport Utility which is found in the Applications/Utilities folder on your Macbook Pro. If you use this utility you can see how your router is setup. Post what you see here, i.e., Network name, radio mode, channel, Security password protection (WPA2 personal is best), etc. Of course, don't post any passwords.
Don't forget to check that the IP Address selector in your iPad WiFi setting for your network (which can be DHCP, BootP or Static) is set to DHCP.
I will turn Time capsule off for a while to try.
At this point it might also be a good idea to also go to Settings > General > Reset on your iPad and select "Reset Network Settings".

Problem accessing BBC News via iPad 2, iPhone or web

Anybody else have these problems - and solutions?
I have continuous, but erratic problems accessing BBC News either through MacBook Pro, iPhone 3G or iPad 2 (64G Wi-Fi & 3G). Until a few months ago, I never had problems accessing BBC News via my computer. Now I often cannot access the site at all, and problems occur whether I use Google Chrome (11.0.696.57)or Safari (5.0.5). Erratically and less frequently, however, the pages load OK. I have no problem loading other news websites, e.g. CNN or Al Jazeera. I live in Spain. My internet provider is Movistar. I have an ADSL connection of 10Mb (maximum available here) and a wireless router. My MacBook Pro runs OS X 10.6.7.
When trying to access BBC through Google Chrome, I get the following message:
Oops! Google Chrome could not find www.bbc.co.uk
Try reloading: www.bbc.co.uk/news/
Additional suggestions:
Access a cached copy of www.bbc.co.uk/news/
Trying to access BBC on Safari, I get this message:
Safari can’t find the server.
Safari can’t open the page “http://www.bbc.co.uk/news/world/” because Safari can’t find the server “www.bbc.co.uk”.
Using the BBC app on my iPad 2 and iPhone 3G, sometimes the BBC News loads OK, but more often, again, I get this message:
No network connection.
Sorry, you are currently offline and will not be able to view any updated content.
N.B. I am clearly NOT "offline" at this time, since I can open any other web page.

I'm trying to access BBC news on iPad 2 through the app. Have the same problems.
I wrote to BBC tech support complaining about my access problem through computer, iPhone and iPad. On May 2, I received the following reply:
Thank you for your email.
We are aware that some people in Spain are having problems accessing the
BBC News site. We have identified the problem to the Telefonica ISP.
We have contacted Telefonica and they have advised anyone with problems
to contact them directly
Kind regards,
BBC News website
Hence, I contacted Movistar (new name of Telefonica) tech support. I was told they knew nothing about the problem and tried to blame my computer for it. And then they hang up!!! Not impressed!!
I wrote to BBC again on May 19 asking WHO I should contact in Telefonica/Movistar, since their tech support staff claim not to know about the problem As of today, no reply from BBC, so still very frustrated!

My access was blocked because i left my pc on at home and now i cannot access anymore with thunderbird only via browser how can i restore access??

I cannot access anymore via thunderbird while with the same pw i can access via browser after my account was blocked how can i restore access via email program?

I was on my gmail account and looked at settings forward and pop/imap
be sure they are activated.
Imap if you want to access it from several places. That way you have the original on Gmail-server and copies on your pc.
Pop on the other hand loads down the emails. perfect if its just one pc.
(i'm not sure the Gmail-server deletes them thou).

Problem accessing em via browser

Similar Messages

Maybe you are looking for