Problem accessing iCloud remotely

I need to access iCloud remotely every now and then. It all worked very well up until a week ago. Whenever I type the URL www.icloud.com instead of the usual login fields I get a page suggesting to configure iCloud on my device. It is configured on all my iOs devices and my Mac (with latest versions). What's wrong? Thank you ;)

You cannot access the iCloud website on an iOS device (at least not on Safari, it may be possible on a non-Apple browser), only on a Mac or PC. On an iOS device you have to use the individual apps - Mail, Contacts, Calendar etc. - to access your data.

Similar Messages

I have problem access ICloud with active pasword

I have problem access ICloud with active pasword
In the Iphone I don't have problem
Tanks

Welcome to the Apple Community.
Try restarting your browser or clearing its cache.

Problems accessing 1 remote desktop when connected with VPN

Hi everyone,
I have an ASA 5505 and have a problem where when I connect through VPN I can RDP into a server using its internal address but I cannot RDP to another server using its internal address.
The one I can connect to has an IP of 192.168.2.10 and the one I cannot connect to has an IP of 192.168.2.11 on port 3390.
Both rules are configured exactly the same except for the IP addresses and I cannot see why I cannot connect to this one server.
I am also able to connect to my camera system with an IP 192.168.2.25 on port 37777 and able to ping any other device on the internal network.
I've also tried pinging it and telneting to port 3390 with no success.
Here is the config.
ASA Version 8.4(4)1
interface Ethernet0/0
switchport access vlan 3
interface Ethernet0/1
interface Ethernet0/2
switchport access vlan 2
interface Ethernet0/3
interface Ethernet0/4
interface Ethernet0/5
interface Ethernet0/6
interface Ethernet0/7
interface Vlan2
nameif inside
security-level 100
ip address 192.168.2.2 255.255.255.0
interface Vlan3
nameif outside
security-level 0
ip address 10.1.1.1 255.255.255.0
ftp mode passive
clock timezone EST -5
clock summer-time EDT recurring
object network obj_any
subnet 0.0.0.0 0.0.0.0
object network CTSG-LAN-OUT
range 10.1.1.10 10.1.1.49
object network CTSG-LAN-IN
subnet 192.168.2.0 255.255.255.0
object service RDP3389
service tcp destination eq 3389
description To DC
object network SERVER-IN
host 192.168.2.10
object network SERVER-OUT
host 10.1.1.50
object network CAMERA-IN-TCP
host 192.168.2.25
object network CAMERA-OUT
host 10.1.1.51
object service CAMERA-TCP
service tcp destination eq 37777
object network SERVER-Virt-IN
host 192.168.2.11
object network SERVER-Virt-OUT
host 10.1.1.52
object service RDP3390
service tcp destination eq 3390
description To VS for Master
object network CAMERA-IN-UDP
host 192.168.2.25
object service CAMERA-UDP
service udp destination eq 37778
object network CTSG-LAN-OUT-VPN
subnet 10.1.1.128 255.255.255.128
object network SERVER-Virt-IN-VPN
host 192.168.2.11
object network SERVER-IN-VPN
host 192.168.2.10
object network CAMERA-IN-VPN
host 192.168.2.25
object-group protocol TCPUDP
protocol-object udp
protocol-object tcp
access-list AnyConnect_Client_Local_Print extended deny ip any any
access-list AnyConnect_Client_Local_Print extended permit tcp any any eq lpd
access-list AnyConnect_Client_Local_Print remark IPP: Internet Printing Protocol
access-list AnyConnect_Client_Local_Print extended permit tcp any any eq 631
access-list AnyConnect_Client_Local_Print remark Windows' printing port
access-list AnyConnect_Client_Local_Print extended permit tcp any any eq 9100
access-list AnyConnect_Client_Local_Print remark mDNS: multicast DNS protocol
access-list AnyConnect_Client_Local_Print extended permit udp any host 224.0.0.251 eq 5353
access-list AnyConnect_Client_Local_Print remark LLMNR: Link Local Multicast Name Resolution protocol
access-list AnyConnect_Client_Local_Print extended permit udp any host 224.0.0.252 eq 5355
access-list AnyConnect_Client_Local_Print remark TCP/NetBIOS protocol
access-list AnyConnect_Client_Local_Print extended permit tcp any any eq 137
access-list AnyConnect_Client_Local_Print extended permit udp any any eq netbios-ns
access-list inside1_access_in remark Implicit rule: Permit all traffic to less secure networks
access-list inside1_access_in extended permit ip any any
access-list outside_access_in extended permit object RDP3389 any host 192.168.2.10
access-list outside_access_in extended permit object RDP3390 any host 192.168.2.11
access-list outside_access_in extended permit object CAMERA-TCP any host 192.168.2.25
access-list outside_access_in extended permit object CAMERA-UDP any host 192.168.2.25
pager lines 24
logging enable
logging buffer-size 10240
logging asdm informational
mtu inside 1500
mtu outside 1500
ip local pool RAVPN 10.1.1.129-10.1.1.254 mask 255.255.255.128
no failover
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
nat (inside,outside) source static SERVER-IN-VPN SERVER-IN-VPN destination static CTSG-LAN-OUT-VPN CTSG-LAN-OUT-VPN
nat (inside,outside) source static CAMERA-IN-VPN CAMERA-IN-VPN destination static CTSG-LAN-OUT-VPN CTSG-LAN-OUT-VPN
nat (inside,outside) source static SERVER-Virt-IN-VPN SERVER-Virt-IN-VPN destination static CTSG-LAN-OUT-VPN CTSG-LAN-OUT-VPN
object network CTSG-LAN-IN
nat (inside,outside) dynamic interface
object network SERVER-IN
nat (inside,outside) static SERVER-OUT service tcp 3389 3389
object network CAMERA-IN-TCP
nat (inside,outside) static CAMERA-OUT service tcp 37777 37777
object network SERVER-Virt-IN
nat (inside,outside) static SERVER-Virt-OUT service tcp 3390 3390
access-group inside1_access_in in interface inside
access-group outside_access_in in interface outside
route outside 0.0.0.0 0.0.0.0 10.1.1.2 1
timeout xlate 3:00:00
timeout pat-xlate 0:00:30
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
http server enable
http 192.168.2.0 255.255.255.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs group1
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set ikev1 transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP
-DES-SHA ESP-DES-MD5
crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
crypto map outside_map interface outside
crypto ca trustpoint ASDM_TrustPoint0
enrollment terminal
subject-name CN=SACTSGRO
crl configure
crypto ikev1 enable outside
crypto ikev1 policy 10
authentication crack
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 20
authentication rsa-sig
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 30
authentication pre-share
encryption aes-256
hash sha
group 2
lifetime 86400
crypto ikev1 policy 40
authentication crack
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 50
authentication rsa-sig
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 60
authentication pre-share
encryption aes-192
hash sha
group 2
lifetime 86400
crypto ikev1 policy 70
authentication crack
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 80
authentication rsa-sig
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 90
authentication pre-share
encryption aes
hash sha
group 2
lifetime 86400
crypto ikev1 policy 100
authentication crack
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 110
authentication rsa-sig
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 120
authentication pre-share
encryption 3des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 130
authentication crack
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 140
authentication rsa-sig
encryption des
hash sha
group 2
lifetime 86400
crypto ikev1 policy 150
authentication pre-share
encryption des
hash sha
group 2
lifetime 86400
telnet 192.168.2.0 255.255.255.0 inside
telnet timeout 15
ssh 192.168.2.0 255.255.255.0 inside
ssh timeout 5
ssh version 2
ssh key-exchange group dh-group1-sha1
console timeout 15
dhcpd auto_config inside
threat-detection basic-threat
threat-detection statistics port
threat-detection statistics protocol
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
username admin password xxxxx encrypted privilege 15
username admin attributes
vpn-group-policy DfltGrpPolicy
tunnel-group CTSGRA type remote-access
tunnel-group CTSGRA general-attributes
address-pool RAVPN
tunnel-group CTSGRA ipsec-attributes
ikev1 pre-shared-key *****
class-map inspection_default
match default-inspection-traffic
policy-map global_policy
class inspection_default
inspect icmp
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
Cryptochecksum:0140431e7642742a856e91246356e6a2
: end
Thanks for your help

Ok,
So you basically have configured the router so that you can connect directly to the ASA using the Cisco VPN Client. And also the objective was to in the end only allow traffic to the LAN through the VPN Client connection ONLY.
It would seem to me to achieve that, you would only need the following NAT configurations
VPN Client NAT0 / NAT Exempt / Identity NAT
object network LAN
subnet 192.168.2.0 255.255.255.0
object network VPN-POOL
subnet 10.1.1.128 255.255.255.128
nat (inside,outside) source static LAN LAN destination static VPN-POOL VPN-POOL
The purpose of the above NAT configuration is simply to tell the ASA that dont do any kind of NAT when there is traffic between the LAN network of 192.168.2.0/24 and the VPN Pool of 10.1.1.128/25. This way if you have any additional hosts on the LAN that need to be connected to, you wont have to make any form of changes to the NAT configurations for the VPN client users. You just allow the connections in the ACL (explained later below)
Default PAT
object-group network DEFAULT-PAT-SOURCE
network-object 192.168.2.0 255.255.255.0
nat (inside,outside) after-auto source dynamic DEFAULT-PAT-SOURCE interface
This configurations purpose is just to replace the earlier Dynamic PAT rule on the ASA. I guess your router will be doing the translation from the ASA "outside" interface IP address to the routers public IP address and this configuration should therefore allow normal Internet usage from the LAN.
I would suggest removing all the other NAT configuration before adding these.
Controlling VPN clients access to internal resources
Also I assume that your current VPN client is configured as Full Tunnel. In other words it will tunnel all traffic to the the VPN connection while its active?
To control the traffic coming from the VPN Client users I would suggest that you do the following
Configure "no sysopt connection permit-vpn" This will change the ASA operation so that connections coming through a VPN connections ARE NOT allowed by default to bypass the "outside" interface ACL. Therefore after this change you can allow the connections you need in the "outside" interface ACL.
Configure any rules you need regarding the VPN client connections to the "outside" interface ACL. Though I guess they already exist since you are connecting there without the VPN also
I cant guarantee this with 100% certainty but it would seem to me that the above things should get you to the point where you can access the internal resources ONLY after when you have connected to the ASA through the VPN client connection. Naturally take precautions like configuration backups if you are going to do major configuration changes. Also if you are remotely managing the ASA then you also have the option to configure a timer on the ASA after which it will automatically reload. This could help in situations where a missconfiguration breaks you management connection and you have no other way to connect remotely. Then the ASA would simply reboot after the timer ran out and also reboot with the original configuration (provided you hadnt saved anything in between)
Why are you using a different port for the other devices RDP connection? I can understand it if its used through the Internet but if the RDP connection would be used through the VPN Client only then I dont think there is no need to manipulate the default port of 3389 on the server or on the ASA.
Also naturally if there is something on the actual server side preventing these connections then these configuration changes might not help at all.
Let me know if I have understood something wrong
- Jouni

Problems accessing mails remotely off MS Exchange Server 2003

Hi
I am trying to access my mails remotely off my companies server webmail while using Safari.
The address is normally as follows . Https://thecompanyservername/exchange
When i type this in the Safari navigation bar its comes up that the page cannot be found
I also have bootcamp installed and when i type in the address when i am in windows mode on internet explorer its takes me to the login page no problem.
My company uses MS Server 2003 . Wondering if its a compatibility problem and if there could be a patch etc
Any advice welcome as to how i can access my mails remotely without having to go into windows mode.
Thanks

iPhone and iPad use a different way of accessing the server.
I don't know the exact details, but we are using Zarafa instead of Exchange and have the same problem:
iPhone and the likes can connect to Zarafas z-push interface, which is some identical interface to the native Exchange interface, while the desktop e-mail application tries to interface with the web front end (via http) of the server.
These are completely different setups and it depends on the actual installation of the server to get this going.
So, you will most likely need different access parameters for the desktop - and the web mail feature has to be enabled on the Exchange server.
In my opinion using the web mail interface is just silly. On the other hand, the native protocol has less features comparedto the web front end, so you are somehow stuck with sins of the past.
Good luck!

Big problem accessing icloud account

We have multiple devices connected to our iCloud account and just logged out using our Mac system. All devices are happily using iCloud but we can not log back into our account on the Mac and are told a mix of Can't log on at this time and ID and password not recognised.
We therefore attempted to renew the password and following the iForgot prompt got to enter the new password screen. On entering a new password we are being told that the account is currently in use and advises us to login...
Wasted time trying to use the support system as everytime I entered details of the problem in the support screens I end up with either - look at the System Status screen (which is all green) and absolutely no option to express concern.
Apple, with all the money you make, eitehr provide a robust iCloud service or at the minimum provide somewhere people can go when it starts to fall apart

Thanks Lanny, unfortunately when we encountered the problem, no issue was being shown on the status page as mentioned, our frustration is that although they include a contact support on that display if you have issues that are not shown, it just takes you back to the self help system with no means of reporting an issue anywhere...
Thanks anyway...

Problems accessing iCloud

I appear to be having issues accessing my iCloud account on certain platforms. I cannot log on to icloud.com but can to this platform. There is no one available

This is happening because you are trying to go to icloud.com using Safari on an iOS device. You have to go to icloud.com from a computer.

Problems Accessing STB Remotely

When trying to access STB from my laptop at work (forgot to program a recording) I get the message that STB is not responding. When asking system to check it I get the message "Bad Gateway".
Anyone know what's up?

I am sorry to hear about the problems you're having with the boxes. I pulled up the equipment and the notifications are successfully going to them. Are you still experiencing the problem?
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

How do I access iCloud remotely from the web?

With MobileMe, I could type the URL MobileMe.com and be presented with a login screen to my account.
How do I get to my account via the web now that I've left MobileMe for iCloud?

http://www.icloud.com

Problems accessing Calendars remotely

I just udgraded to Mountain Lion 10.8.3 with Server OS X v2.2.1. I can reach my calendars on my LAN but when I try to reach them through our WAN I get this message:
Calendar service is turned off.
An administrator can turn it on using the Server application.
Calendars is set to ON in the Server App and I've tried various things as far as trying https:// , and turning off certificates for Calendars.
Nothing seems to work.
If I just enter the wan ip address it loads the server homepage which tells me it is connecting to the server alright, but when I click on the calendars link it gives me the message above
Any ideas?
Thanks!

I am sorry to hear about the problems you're having with the boxes. I pulled up the equipment and the notifications are successfully going to them. Are you still experiencing the problem?
Anthony_VZ
**If someones post has helped you, please acknowledge their assistance by clicking the red thumbs up button to give them Kudos. If you are the original poster and any response gave you your answer, please mark the post that had the answer as the solution**
Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or plan

Having problems accessing any apps on my iCloud. Set up and signed in successfully but then when I click on an app it just says there's a problem but doesn't say how to fix it. Please help, am very new to this!

Hi
I am very new to updating my iPod touch and this is the first time I've used the iCloud. However, I am having problems accessing any apps on my iCloud such as photos, reminders etc. I've set it up on my iPod touch successfully and I can sign in on my PC. However, when I try to access any of the apps it says there was a problem. It doesn't tell me how to fix it or what the problem is.
Is anyone able to help?

It is working now. I no longer get the message about the item not being available in the US and I can access the store.

Cannot access iCloud which started yesterday 4/17/14. No problem with other browers.

I use a bookmark tab to access my iCloud items i.e. calender, contact, notes, etc. Yesterday when I tried to access, I get the "background" of the opening page and nothing else happens. No problem accessing with Chrome or IE. Very annoying as Firefox is my main and preferred browser. Has anyone else experienced this?

Hello,
Many site issues can be caused by corrupt cookies or cache. In order to try to fix these problems, the first step is to clear both cookies and the cache.
Note: ''This will temporarily log you out of all sites you're logged in to.''
To clear cache and cookies do the following:
#Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
#Under "Time range to clear", select "Everything".
#Now, click the arrow next to Details to toggle the Details list active.
#From the details list, check ''Cache'' and ''Cookies'' and uncheck everything else.
#Now click the ''Clear now'' button.
Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.
Did this fix your problems? Please report back to us!
Thank you.

I can't access iCloud. Tells me to check settings but when I do I can't find the the problem. Any thoughts please?

I import photos to iCloud. Tells me to check settings but when I do I can't find the problem.

I've not experienced this, but a few other people have reported the same.
I don't know what the issue is, but try changing your DNS server settings to use Google's DNS 8.8.8.8 and 8.8.4.4 in either your router settings or your computers internet settings.
(Incidentally, you can't access iCloud.com from an iOS device).

TS1424 Hy. Please help me. what's the problem? when i accessing icloud or find my friend app: The maximum number of free accounts have been activated on this iPhone.

Hy. please help me. what's the problem? when i accessing icloud or find my friend:The maximum number of free accounts have been activated on this iPhone.

Then you'll have to use another iOS device or Mac running OS X Lion or higher to create a new account for you to use on your phone. If you don't have one, perhaps a friend would allow you to create and account on their device (note: this will use one of their three maximum accounts). To do this, they would need to go to Settings>iCloud, tap Delete Account (which will delete the account from their device but not from iCloud), then allow you to sign back in with your ID to create the new account. Then tap Delete Account to delete the new account from their device, and finally, sign back in with their iCloud ID to restore their iCloud account to their device. Then you can sign in with your ID on your phone in Settings>iCloud and use the new account.

Canada iCloud Problem Accessing

I cant access iCloud email at all this morning. I tried from macbook, PC and by web from using safari, firefox and chrome. Now after trying again I was able suddenly to log on and I click my inbox and then it bring to this page http://www.te.com
I tried again by going www.me.com and again it bring me to that page te.com
weird

You cannot access the iCloud website on an iOS device (at least not on Safari, it may be possible on a non-Apple browser), only on a Mac or PC. On an iOS device you have to use the individual apps - Mail, Contacts, Calendar etc. - to access your data.

How do i access icloud from my sony laptop. ive taken photos from my 5s iphone and dont know how to send to icloud then see them from laptop

How do I access icloud from my sony laptop. do my photos go automatically to the cloud from my 5S iphone?

Remote Wipe should solve the problem.

Problem accessing iCloud remotely

Similar Messages

Maybe you are looking for