Problem accessing internet using time capsule after update to mountain lion

After updating my macbook air to moutain lion i am having some trouble accessing internet.
Evertytime i re-start my mac or airport utility i am able to access internet properly. After sometime when i access some particular sites, internet access goes down and i need to restart time capsule to access internet again.
Even though in airport utility internet is marked as disconnected, time capsule's indicator is still glowing green colour.
I tried deleting the com.apple.timemachine.plist file from /Library/Preferences/, but still no luck.
Is anybody else also facing the same problem? How can i resolve this problem?

Is the time capsule the only router in the network?
Try setting the lease time in the TC to very short value.. 20min or even less, 10min. It will not add signficant network traffic but might keep the Air updated to the TC.
I would also use SMB compatible name for the TC as well as wireless.. ie short, no spaces.. pure alphanumeric.
Set a different name for 5ghz so it cannot swap around.
And lock the wireless channels. Try each channel in turn, to see if any are better.

Similar Messages

Cannot access disk in Time Capsule after updated to 7.4.1

I have a macbook pro and a PC(MS Vista), both connect to the Time Capsule via LAN.
After I updated the Airport Utility to 7.4.1 in PC several days ago, I could never access the disk in Time Capsule via PC, it always said "Unknown user, incorrect password, or login is disabled. Please retype the login information or contact the disk's administrator". However, everything is fine when I use macbook to access the disk.
I tried to reset the password, tried to access with disk password or with accounts, but nothing worked.
Whatever the password I changed to, it always show the same dialog.
Thank you for your helping!

I had the same problem.. Updating to 7.4.2 seems to have solved the problem, for me anyway. There seem to be a lot of posts about people noticing network slow downs. Can't say I have, but currently I can't access my printer attached to the USB port on my TC from my PC. My iMac can print to it no problem. Bought printer after update installed. If someone can point me in the right direction of solving that problem that would be great.
Cheers

Problems with my Time Capsule since updated to Mountain Lion

Since I have updated my MacBook Air (late 2010 model) to OS X Mountain Lion, I am experiencing problems connecting my Macbook Air to Time Capsule and experiencing problems in Time Machine copies to the Time Capsule:
1.- When I turn on my computer, Time Machine starts working, taking a lot of time searching the backup disc (my Time Capsule), then appears an error message (Can not find the disk or it says that the Time Capsule is already in use);
2.- After several attemps (restarting the computer and restarting the Time Capsule), sometimes Time Machine starts to work, but it shows that it has to copy approximatly 28 G. Also the copy is to slow (it only copied 500 Megabytes in two days).
In the meanwhile the Time Capsule light is turned on (green) - so it seems the Time Capsule is working normally an the problem would be Time Machine.
I would not like to restart everytime my Time Capsule or restart my computer in order to make Time Machine works. I would really appreciate help for solving this problem (I apologize for my so basic English).
My Airport Utility Version is 6.1 (610.31)
My Time Capsule Version: 7.6.1.
My Computer: MacBook Air (late 2010)
My System: OS X Mountain Lion (when I used OS X Lion all was working normal)
Thanks in advance for your help !!!

The first backup after an update will be quite slow (but shouldn't be anywhere near that slow). And the searching on the backup disk will have to be repeated on every backup attempt until one completes normally.
Connect to the TC via an Ethernet cable.
Also see the green box in #D2 of Time Machine - Troubleshooting. Something there may help get back on track.
(and your English is fine -- better than many who speak it natively, I'm sorry to say.)

Option in MAIL to "Add to iPhoto" isn't working after updating to Mountain Lion. Anybody else with this problem or sulution?

Option in MAIL to "Add to iPhoto" isn't working after updating to Mountain Lion. Anybody else with this problem or sulution?

A brief search. Or even glancing at the "more like this" list to the right will show that this is a known problem and there is no current solution. Workaround includ saving to the desktop and importing from there or opening in Quick Look and adding to iPhoto from there
LN

After updating to mountain lion on my mac pro I am unable to connect my g-raid

After updating to mountain lion on my mac pro I am unable to connect my g-raid 1T external hard drive using the firewire connection? I have 4 places to plug the firewire into, none work. All ports used to work with Snow leopard?

Try this:
Boot into Safe Mode then restart normally.
Repair the Hard Drive and Permissions - Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
If this does not work to fix the problem, then:
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

Can I use time machine to revert to Mountain Lion from Maverick?

In spite of everyone saying how great Maverick is, I have poblems with slow operation, hard to use mail addresses, problems with iPhoto, etc. So I want to go back to Mountain Lion. Can I use Time Machine to restore back before Maverick was installed?

Only if you have a full backup of Mountain Lion on your Time Machine backup drive. Then you can boot to the Recovery HD that is on the Time Machine backup drive, erase your drive, then do a full Mountain Lion restore. But if you have already used Time Machine to backup your Mountain Lion system, then this won't work. You will need to erase the drive and reinstall Mountain Lion separately. Then you can restore your Home folder from the Time Machine backup.
Or you can avoid all the above by trying to fix the problems with your Mavericks system. You will need to upgrade iPhoto.
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
    b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
     Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
     COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
     computer and after the chime press and hold down the OPTION key until the boot manager
     screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
     Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo).
4. Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Reinstall the 10.9.3 update: OS X Mavericks 10.9.3 Update (Combo).

Line 6 tone port gx doesn't work properly after updating to mountain lion, i'm hearing artefacts, how is that possible?

i am using logic 9 and line 6 toneport gx for recording my guitar. on the previous version of OSx everything worked perfect, but now, after updating to mountain lion, i hear noise after i play something. the settings were: input: toneport, output: coreaudio, 44100, buffer 512. now they are the same and i have noise. i've installed the latest drivers for toneport and changed the buffer settings. when the buffer is large, i can play some seconds without the noise but it appears after 15-20 seconds. and when the buffer is small it appears faster. i assume it has to do something with the buffer size but i don't know for sure. any ideas?

I have the same problem after updating to ML. It's unusuable for recording until it gets sorted out.
I think it's a problem at the Line 6 end. They are aware of it, and are working on some patch/fix to address the strange artifact sounds, so hopefully it will be ready soon.
See link - http://line6.com/support/thread/86574

After updating to mountain lion, icloud password has not been accepted by system preferences

After updating to mountain lion my icloud password in the system preferences has not been accepted anymore. I already changed the password. Also the new one is not accepted by the system preferences. On iPhone and online everything is fine. Any idea?

I just got off the phone with Apple Support. They say they are having problems with iCloud and this issue should be resolved in 3-4 hours. We'll see......

After updating to Mountain Lion, Mail has lost the RSS feeds, the colored marked mails folder, and the notes

After updating to Mountain Lion, Mail has lost the RSS feeds, the colored marked mails folder, and the notes. Where are they?

why did they erase something usefull and easy to use?

After updating to mountain lion, my Safari e-mail thru AT

After updating to mountain lion, my Safari e-mail thru AT&T, doesn't show the select all button at the top of the e-mail list, it is there in Chrome and Firefox. Is this a problem with AT&T's site or are others experiencing this same problem. Also my contacts list has change it's look and you can't select multiple contacts.

Hmmmm,
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   com.apple.phonenumbers
0x00007fff8e0300cb 0x7fff8e02e000 + 8395
1   com.apple.phonenumbers
0x00007fff8e02f50b 0x7fff8e02e000 + 5387
2   com.apple.phonenumbers
0x00007fff8e02f87d PNIsValidPhoneNumberForCountry + 112
Any ideas on your end on this phone number for Country???

Apple TV icon is not showing on macbook pro after update to Mountain lion

I wanted to try Mirroring from my macbook pro to my tv using the new airplay update from Mountain lion but the icon is not showing after the update.

Welcome to the Apple Community.
AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). It also requires the computer to be using wi-fi.

How do I find the address -thread - of a file. I used to use spotlight but after switching to Mountain Lion it no longer gives me this.

How do I find the address -thread - of a file. I used to use spotlight but after switching to Mountain Lion it no longer gives me this.

Hold Command-Option while pointing to an item in the Spotlight list. Or Command-Click will show the item in the Finder.

Keeping getting an error with-in the App Store. Error 100 saying that my payment can't be received at the time. I updated to Mountain Lion to download the new Logic Pro X. Now left with now recording software and it's not letting me buy the new one.

Keeping getting an error with-in the App Store. Error 100 saying that my payment can't be received at the time. I updated to Mountain Lion to download the new Logic Pro X. Now left with now recording software and it's not letting me buy the new one.
iMac, OS X Mountain Lion (10.8.4), trying to get Logic Pro X

Hello jst84,
The following article may be helpful in getting your purchase to complete.
Mac App Store: "An unknown error occurred (100)" when purchasing
http://support.apple.com/kb/TS3637
Cheers,
Allen

After updating to Mountain lion I am having trouble printing to my wifi Epson printer

After updating to Mountain Lion I am having trouble printing on my wifi Epson Workforce 645. I keep getting an error message and my computer is set in the system prefrences to that printer

What is the error message?
Try resetting the printer queues:
http://support.apple.com/kb/PH11143
This update also clears your "computer name" in Syst Prefs > Sharing, and entering a computer name solves network print issues for many.

TS3276 hi after updating to Mountain Lion, it becomes difficult to quit Mail, always have to Force Quit. And while Mail is on standby, the fan keeps on running full power, the laptop is hot. Why is this happening?

hi after updating to Mountain Lion, it becomes difficult to quit Mail, always have to Force Quit. And while Mail is on standby, the fan keeps on running full power, the laptop is hot. Why is this happening?

If your computer was hot it wasn't asleep - it either didn't go to sleep or it work up after you put it to sleep. I've seen both things happen. First, read this article and follow the instructions.
1) For the next few days/weeks pay attention to the blinking light on the front of your computer when you close the lid. Don't put the computer into your backpack/case until it begins to blink. Wait a minute or so after it starts to blink to make sure it doesn't stop blinking - the signal it woke back up.
2) having followed the above instructions, if you take the computer out and it is hot again or if you take it out and discover it has powered down (you'll know this because when it starts up the battery will be drained and you'll see a progress bar over a ghostly display that will eventually become normal) immediately start the Console program and perform a search on 'sleep' and then 'wake'. This should bring up all the recent log files about sleep state changes (going to sleep and waking up). You should see one for when you put the computer to sleep and put it away and the next one should be just after you got it out. You'll find at least one though that shouldn't be there. That will tell you when the computer work up (when it shouldn't have) and might give a clue as to why.
One of the whys could be a magnet that is making the computer think the lid has been opened.

Problem accessing internet using time capsule after update to mountain lion

Similar Messages

Maybe you are looking for