Problem accessing management consol

I lost my ability to access my management consol and now can't log into it.
I can still access my StoreCenter px2-300d as a network drive, but when I put in the url 192.168.x.x(internal to my network) my web browser says it cannot find the device. My router still sees the device and gives me the url#. I did a reset. I also downloaded the Lenovo software which supposedly allows me to access it and set it up.
I don't know what happened. Did a file become corrupt?
How do I troubleshoot it?
Thanks in advance for any suggestions.

Hi a2scotty,
There could be many issues causing this to happen. I would recommend backing up your data from the device as soon as possible before proceeding to troubleshoot the device.
Just to clarify, can you access the web management console from the Storage Manager software? Or do you not have access only from the web browser? You may need to update your web browser or try a different browser.
Please reboot the device if you have not done so already.
How long did you hold the reset button for? First try holding the reset for four seconds. If it does not reboot, try 15 seconds. If it still does not respond try 30 seconds or longer until the device reboots.
You could also try connecting the device directly to your computer with an ethernet crossover cable.
Instructions to Direct Connect to NAS:
Unplug the NAS from the router
Unplug the pc from the router (if the pc is wireless, disable wireless)
Using Ethernet Cable, plug the NAS directly into the pc with no other devices attached.
Restart the NAS and wait for it to boot COMPLETELY 100%
The NAS will request an address from the PC which will be an APIPA address (this is a 169. address)
Open up your Start Menu and type in CMD in the search bar and select the CMD program.
Type in "arp -a" in the cmd prompt
The first time you use the arp -a in a cmd prompt, it gives you the 169.x.x.x address of "The PC"
You may have to arp -a twice to get the NAS address.
The second time you use the arp -a I will get another APIPA address in the 169.x.x.x address
Take the new address and use it in the web browser just like normal to access the device.
Have questions and need answers?
Search the database for answers to FAQ's, software/driver downloads, tutorials, news, features and more!
LenovoEMC Support & Downloads
LenovoEMC North America Support Contact Page

Similar Messages

Getting error while opening Sun access manager console

We are facing problem while accessing console of Sun Access Manager. We got No Page Found error whenever we try to access the Sun Access Manager console. We have tried restarting the directory server and web server but even that doesn�t help us. Following are the error that gets recorded in log files:-
ERROR: AuthD init() com.iplanet.dpro.session.SessionException: AuthD failed to get auth session
ERROR: Error creating service session java.lang.NullPointerException

The ns-slapd.exe process belongs to the Directory Server. You should therefore check if your DS instance is set up properly.
Michael

Remote Access Management Console - configuration issue with Network Location Server

2012 Std R2
The remote Access management console operation status shows all green except for network location server .
Error: There is no response from the network location server URL. DirectAccess connectivity might not work as expected, and DirectAccess clients located inside the corporate network might not be able to reach internal resources.
Resolution listed as:
1. Configure the network location server on a server that is highly available to clients on the internal network.
2. If the network location server is running on the Remote Access server, ensure that IIS is running, and that the URL is available.
The remote access server is located on this server. IIS is running. What URL: show I be looking at?
Any other thoughts so I can get remote access working.
l also am getting a remote access error for IPV6, could this be a cause:
RoutingDomainID- {00000000-0000-0000-0000-000000000000}: Unable to add the interface {D37062B2-A3E0-4496-A459-9E0BBCE5423C} with the Router Manager for the IPV6 protocol. The following error occurred: Cannot complete this function.
John Lenz

Hi John,
please follow the steps to reinstall TCP/IP stack.
1.Restart your PC into Safe Mode with Networking.
2.
Edit your registry. Delete the following keys:
HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services/Winsock
HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services/Winsock2
3.
Open the nettcpip.inf file in your %winroot%/inf folder
(%winroot% is usually c:/windows).
Find the [MS_TCPIP.PrimaryInstall] section. Change the Characteristics value from 0xA0 to 0x80.
Open the properties of the network connection you want to fix. In the General tab, click on the Install button. Click on the Have Disk button, and point the location to %winroot%/inf. After that select TCP/IP (not version 6).
4.
Now you would notice that you can uninstall TCP/IP!
Do that, then restart the PC.
Go back to your network connection, and install TCP/IP again as per the above. After another reboot, you should be up and running.
I also noted that the XP network repair tool may yank out the ISA 2004 firewall client stuff. Just run the firewall clinet repair or install it again to fix that problem after you did your reboot. Before you do this kind of crazy stuff.
5.
This along with a TCP/IP reset using the netsh command:
netsh int ip reset resetlog.txt
wish you have a nice thanksgiving too
Regards,
Mike
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Lanuch Remote Access Management Console with a connection to a remote server

I've installed the Remote Access Management Console on my Windows 8 workstation so that I can administer DirectAccess on a Windows Server 2012 server without having to connect to it with Remote Desktop. However, every time I launch the console I have to
click "Manage a remote server" and enter the server name. Is there a way to launch the console with a command-line parameter that opens the remote server automatically?
I've tried running ramgmtui.exe with the name of the server as a parameter, and I've also tried running "ramgmtui.exe /?" but the console doesn't launch at all when called with any of the parameters I've tried.

Hi,
Have you installed Remote Server Administration Tools?
You may use Server Manager to Manage another server. Once you add a server, it will be listed in All Servers. So you will never have to enter the server name.
For detailed information, please view the link below,
Manage Multiple, Remote Servers with Server Manager
http://technet.microsoft.com/en-us/library/hh831456.aspx
Hope this helps.
Steven Lee
TechNet Community Support

Problem with Management Console

This is not really an installation issue, but this seemed the most appropriate category.
Whenever I try to access any functions of the Users Tool in the Solaris Management Console (gui), such as viewing users, viewing roles, etc., an error msg pops up stating "CIM_ERR_FAILED" . This occurs whether I load locally or over network from another machine's Management Console.
The box is running Solaris 8 04/01 with several packages from the Sun companuon CD installed, as well as the latest Sun recommended patch cluster. Any help and/or suggestions would be greatly appreciated.

I think I temporarily fixed this problem I am not sure how this will affect the development.
But atleast I can start the J2EE/DB services so that I can start and stop services from the MMC
What was happening was that the services
SAPJ2E_00
SAPJ2E_01
were not starting up because of the logon problems, the default account that was created SAPService( something like that ) was not able to log on, I changed the logon permissions to "Local System" and started the service, this time atleast the service started.
I need to launch the Development Studio and see if I am able to work with the new account permissions on the J2EE server

Regarding Access Manager Console Not Coming

Hi
I had installed glass fish application server on one zone.....its working fine.....then i try to install access manager 7.1 on same zone it shows successfully installed in the logs....then i try to open access console through firefox....*it showing the erroor:-http status 500 ....root cause [java.lng .null pointer exception]*
My directory server 6.3 is working fine and it is on some other zone ...
kindly tell me what's going wrong...
Thanks
Sarvar Ahmed

welcome.eis wrote:
I had installed glass fish application server on one zone.....its working fine.....then i try to install access manager 7.1 on same zone it shows successfully installed in the logs....then i try to open access console through firefox....*it showing the erroor:-http status 500 ....root cause [java.lng .null pointer exception]*As this question has nothing to do with Messaging Server I suggest asking this question in the Access Manager forum instead:
http://forums.sun.com/forum.jspa?forumID=760
Regards,
Shane.

Problem accessing admin console

Hi,
I am new to oracle identity manger.I just installed the whole oim setup on linux machine.All worked fine and i was able to access admin console and was able to log into it.
But after installing wegate i am not able to access admin console though weblogic is starting fine.While starting weblogic using xlstartserver script i get get some exception like it cannot find some class for nexaweb something like that and it cannot load ejb module.Well i do not understand what is wrong.
Please help me.
thanks.

I've also been getting this error 100% of the time since subscribing our team to Creative Cloud earlier this week - so far the money's been wasted and have found no way to access adminconsole.adobe.com.
I can access creative.adobe.com just fine - but this is useless for me, as it is entirely personalised and contains no options or data that are related to the administration of my team account. I've called the support line, but was sadly unable to find anyone offering support - only sales advice!
Anybody able to shed any light on this whatsoever? All the Adobe Support I've been in touch with is entirely unable to assist with website problems - they just want to sell me the software that I already bought ; )

Access Manager console url

I am accessing the oam console via its hostname:port/oamconsole and works fine.
This is fine for internal access, but to access it from external network need to provide/publish
a separate url.
Where should one configure this externally published url to access oam console
- on Load Balancer or OHS server?
External network ---- Load Balancer ---- OHS server ------ OAM server
OHS server with mod_wl_ohs pugin would act as reverse proxy for OAM server url?

You could use either method. Note 1327863.1 gives details on using an OHS proxy (it also includes front-ending the OAM managed server urls in this way), and http://docs.oracle.com/cd/E27559_01/install.1112/e27301/webgate10g.htm gives details on how to additionally protect the OHS proxy with a WebGate, if required.
Regards,
Colin

Problems accessing Grid Console through firewall

I am trying to set up my Grid console to be accessible pubically. My Network admin add a entry to the CSS for a public IP and site oms.domain.com which points to http://host:7777/em. I have been unable to get this to work though. I can get to the console localy on 7777 and 4889 but not using this public address.
I tried to add a proxy server to the OMS for the oms.doamin.com on prot 80 but this does not seem to have any affect.
Anybody have any luck configuring the console like this?
Thanks,
Brian

Reinstall the OMS just so I can access it through a firewall? The oms.domain.com address is registered in the CSS and points to my hostname:7777/em why would I need to reinstall? I figured there was just a config file within Apache that I would need to update to tell Apache to allow connections from the public address. Seems overkill to reinstall everything. This OMS is monitoring a couple hundred targets at this point. Reconfiguring all that would be slightly painfull.
Any other suggestions?

Problem with Management Console for Netweaver Development Studio

I installed the Netweaver Development Studio and all works fine
Normally the MMC shows SAP Systems and a J2E instance below it which is used to start the services
But when I shutdown my machine and restart it again the J2E item below the SAP Systems does not appear and I cannot restart the J2E/SAP/DB/J2EE services
Is there another way I could restart all the related services from a batch file or a utility that takes a config file
because for the last few days I am having to re-install the Developer studio to get it to work
Please help me on this because I am wasting atleast 2 hrs daily to reinstall so that I can control all my services
thanks
Tony

I think I temporarily fixed this problem I am not sure how this will affect the development.
But atleast I can start the J2EE/DB services so that I can start and stop services from the MMC
What was happening was that the services
SAPJ2E_00
SAPJ2E_01
were not starting up because of the logon problems, the default account that was created SAPService( something like that ) was not able to log on, I changed the logon permissions to "Local System" and started the service, this time atleast the service started.
I need to launch the Development Studio and see if I am able to work with the new account permissions on the J2EE server

Not able to start the Sun Java System Access Manager 7 Console

Hi All,
I have successfully installed the Sun Java System Portal Server 7 on RHEL 4.0.The problem I am facing is not able to start the Sun Java System Access Manager 7 Console while accessing the URL: http://fqdn:8080/amconsole
As soon as I try to access this URL it gives me following Excepiton:::::::
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
com.iplanet.jato.NavigationException: Exception encountered during forward
Root cause = [java.lang.NullPointerException]
     com.iplanet.jato.view.ViewBeanBase.forward(ViewBeanBase.java:386)
     com.iplanet.jato.view.ViewBeanBase.forwardTo(ViewBeanBase.java:267)
     com.iplanet.am.console.base.ConsoleServletBase.onUncaughtException(ConsoleServletBase.java:338)
     com.iplanet.jato.ApplicationServletBase.fireUncaughtException(ApplicationServletBase.java:1023)
     com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:469)
     com.iplanet.jato.ApplicationServletBase.doPost(ApplicationServletBase.java:324)
     com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:294)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:747)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
     sun.reflect.GeneratedMethodAccessor106.invoke(Unknown Source)
     sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     java.lang.reflect.Method.invoke(Method.java:585)
     org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
     java.security.AccessController.doPrivileged(Native Method)
     javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
     org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
     org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
If anyone have any idea about the cause of this error,please let me know.All suggestions are welcome .
Thanx and Regards,
Chirag.

Hi All,
I am having exactly the same problem with the same stack trace. Has anybody have an idea how to fix this?
I have downloaded the Java Identity Management Suite.(java_es-5-identsuite-ga-windows-x86.zip) The first time installation was fine and I was able to bring the Access Manager console. I was able to create users groups etc.
However, when I uninstalled and installed it again, I got exactly the same error described in the thread. Running "amserver start" and "amserver restart" did not help. I did the installation one more time
but again I got the same error.
Thanks for the help.
celikkan

How to change LDAP server setting in Access Manager 6.2

Hi,
We have initially set authentication as a SunONE Directory Server 5.1 (master DS1) in Sun Java System Access Manager 6.2. In both /etc/opt/SUNWam/config/serverconfig.xml
/etc/opt/SUNWam/config/AMConfig.properties
conf files, DS1 was set initially. Also on console's Service Configuration ->LDAP->Primary LDAP Server was set as "DS1"
Now the problem is that I am not able to change the DS1 to the other master "DS2". I set DS2 in both above conf files and also the Service Configuration page as Primary LDAP Server. I restarted the server. When I stopped the DS1, I couldn't login access manager console with any user. It looks like it is still trying to get authentication from DS1.
Does anybody know what I am missing here?
Regards,

After hopeless tries, I finally made it work;) The trick was actually updating the sunKeyValue attribute of the entry:
"dn:ou=default,ou=OrganizationConfig,ou=1.0,ou=iPlanetAMAuthLDAPService,ou=ser
vices,dc=company,dc=com" in one of the master DS I have.
Even though I set DS2 and loadBalancer hosts in all conf files and in Primary LDAP conf in amconsole's Service Configuration, it just didn't work until I inserted loadBalancer host in sunKeyValue attribute.
Hope it helps to someone....
-Bora

Unable to see options in access manager.!!!

Hey Geeks,
I am not sure what changes but I do not see 'users","roles" ,"services" on the access manager console under view dropdown.
has somebody faced this kinda issue.?
I was able to see all the options earlier and I havent changed anything.Although I did try to modify a users profile in the LDAP directory through ldap browser.
When I check "display options" for my organization all options are specified.I have no clue why I am not able to see all option for my org.
any pointers?
Regards

Guys,
I had to re-install the whole Suite to get rid of the problem.Please update me If there is any solution to this.!!!
Thanks in advance!
Deepak.

Can not login access manager

mail server version is JES messaging Server 6 2005Q4 :
My Access Manager:http://hostname:8080/amserver
last week, i login access manager, under the web label or configuration label�F
in "ldap" item�Ci add new dc=xx,dc=xx,dc=xx�C
then save configuration.
but after that i can not login access manager.
when i user admin login,it print:"
Authentication failed".
what should i do to restore access manage?
thanks!

javatoall wrote:
Hi,
I login Access Manager, access sample "realm" -> Authentication->
Advance Properties -> User profiles and then I choiced "Dynamic with user Alias".
Then I only configure JDBC authentication with mysql database that I don't used ldapservice.
When I created a one new user in MySQL, I can login into web application that i security as "sample.war" successfull but new user don't right access resource that i protected before.
When i login access manager with amdmin user, I can not find user that i has been created it in MySQL database. t
When the users are created through the dynamic profile, the default cn/sn are set to "default" , after creation you need to login to amconsole as amadmin and change/add proper values for these attributes.
Alternatively you can set the protected resource's policy subject to Authenticated users. This will work but not sure will meet your requirement
>
When i login access manager console with new user, it login successful, and view Profile of new user that I has been created.
Can you tell me How to manage new user that I has been new in MySQL by Access manager console ?
I want to configure access proteced resourse for that user. How to configure that ?
read above use the authenticated users subject
Thank for every help.
VinhND.

Sun Java System Access Manager 7.1 config. failed during installation

{color:#0000ff}Hi,
I have installed sun java communication suite 5 on a single host on sun solaris 10.
I have installed required packages and it works fine.
But as per organization need, I have to change domain name.
So i have uninstalled everything and tried to install again with new domain name.
I have made proper entries in hosts file and resolve.conf file.
But duing the first phase of installation only , i failed in configuring access manager 7.1
I have also cerate same scenario in my test environment, but everytime i face the same error.
and sun java access manager 7.1 fails in first stage of installation only.
So would like to know the proper installation procedure while i change the domain name on same hardware...
I have checked both installation logs & summary logs.
But no error, no failed , no severe.
Attached is the summary of installation logs.
Summary Logs :
Installation Summary Report
Install Summary
Sun Java(TM) Communications Suite : Installed
Sun Java(TM) System Web Server 7.0 : Installed, Configured
Java DB : Installed, Configure After Install
Sun Java(TM) System Message Queue 3.7 UR1 : Installed
Sun Java(TM) System Monitoring Console 1.0 : Installed, Configure After Install
Sun Java(TM) System Directory Preparation Tool : Installed
Sun Java(TM) System Directory Server Enterprise Edition 6.0 : Installed, Configured
Sun Java(TM) System Access Manager 7.1 : Installed, Configuration Failed
Sun Java(TM) System Messaging Server 6.3 : Installed, Configure After Install
Sun Java(TM) System Communications Express 6 : Installed, Configure After Install
Communication Services Delegated Administrator : Installed, Configure After Install
Configuration Data
Sun Java(TM) System Web Server 7.0 :
Web Server Instance installation Directory : /var/opt/SUNWwbsvr7
Web Server installation Directory : /opt
Web Server Administration Server Host : RADAGWMSG221.myreliancemail.com
Web Server Admin Server Mode : true
Web Server only CLI installation : false
Sun Java(TM) System Directory Preparation Tool :
Directory Preparation Tool Installation Directory : /opt/SUNWcomds
Sun Java(TM) System Directory Server Enterprise Edition 6.0 :
Directory Server Installation Directory : /opt/SUNWdsee
Sun Java(TM) System Access Manager 7.1 :
Access Manager Installation Directory : /opt
Access Manager Protocol : http
Access Manager Port : 80
LDAP User ID : amldapuser
Administrator User ID : amAdmin
Web Container : WebServer
Access Manager Web Server Host Name : RADAGWMSG221.myreliancemail.com
Access Manager Web Server Instance Directory : /var/opt/SUNWwbsvr7/https-RADAGWMSG221.myreliancemail.com
Access Manager Web Server Port : 80
Access Manager Console Host (for Existing console) : RADAGWMSG221.myreliancemail.com
Access Manager Console Deploy URI : amconsole
Access Manager Password Deploy URI : ampassword
Access Manager Host : RADAGWMSG221.myreliancemail.com
Access Manager Console Port(for Existing console) : 80
Access Manager Services Deploy URI : amserver
Access Manager Cookie Domain List : .myreliancemail.com
Access Manager Common Domain Deploy URI : amcommon
Access Manager Directory Server Host Name : RADAGWMSG221
Access Manager Directory Server Host : RADAGWMSG221.myreliancemail.com
Access Manager Directory Server Port : 389
Access Manager Directory Root Suffix : o=rmail
Access Manager Directory Manager DN : cn=Directory Manager
Organization Marker Object Class : sunISManagedOrganization
User Marker Object Class : inetorgperson
Organization Naming Attribute : o
User Naming Attribute : uid
Sun Java(TM) System Messaging Server 6.3 :
Messaging Server Installation Directory : /opt/SUNWmsgsr
Sun Java(TM) System Communications Express 6 :
Communications Express Installation Directory : /opt/SUNWuwc
Communication Services Delegated Administrator :
Communication Services Delegated Administrator Installation Directory : /opt/SUNWcomm
{color}

Rushi-Reliance wrote:
Kindly let us know how to proceed further as we are waiiting some reply from your team.As I already advised in your previous posting (http://forums.sun.com/thread.jspa?threadID=5359095), you are best off re-installing solaris from scratch and installing Communication Suite 6 update 1 if you cannot get Access Manager 7.1 configured.
Regards
Shane.

Problem accessing management consol

Similar Messages

Maybe you are looking for