Problem accessing Outlook from a site on one of my computers

This is difficult to explain.
I have two computers -one laptop and one desktop. We have upgraded to Windows 7 on both but I do not do updates on the laptop.
I work on a website - and there is an availability to click on an icon in one of their pages - which will open an email in my Outlook program.
The icon works on the laptop - but does not work on the desktop - ie - I am unable to send pop my email (with their email address) into my Outlook program directly from the website.
I have tried to match up all the settings on the two computers - and everything seems to be exact. BUT there is a Tool on the destop giving me Adblock Plus Preferences - this is not in the desktop's list.
I have no idea where Adblock comes from and don't know if this is the problem
If it is - how do I change the setting?
If it is not - what other setting should I be looking for?
Thank you for any suggestions
Ladybearbc

Hah.... That was quick...! Seems to have worked too. Very easy. Annoyed with myself that I didnt see that.
Thanks a million
Richie

Similar Messages

When I try to open live hot mail I get this message:The Windows Live Network is unavailable from this site for one of the following reasons:

When I try to open live hot mail I get this message: The Windows Live Network is unavailable from this site for one of the following reasons:
* This site may be experiencing a problem
* The site may not be a member of the Windows Live Network
You can:
* You can sign in or sign up at other sites on the Windows Live Network, or try again later at this site.
However, when I open hot mail in IE it opens just fine. Tried changing the password as suggested but it did not help in Firefox.

Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"

SYSTEM ERROR : com/adobe.processingexception:Problem accessing data from De

Hi SAP Guru,
We have configured ADOBE for separate ABAP server and Java Server.
But when I am execution report FP_TEST_00 getting below error
ADS: com.adobe.ProcessingException: Problem accessing d(200101) Message no. FPRUNX001
FP_CHECK_DESTINATION_SERVICE
FP_CHECK_HTTP_DATA_TRANSFER giving error
SYSTEM ERROR : com/adobe.processingexception:Problem accessing data from Destination dest :FP_ICF_DATA_IP1//sap/bc/fp/form/layout/FP_FORM_SECURITY_TEST.XDP?fp-language=DE
But report fp_pdf_test_00 is giving postive response.
I have troubles hooted according to note 944221 , my configuration is ok but no success.
Please help to resolve this issue.

Hi,
Check your ADS Connection .
Do one thing
Go to T-code "SM59" - "RFC Destinations (Display/Maintain)"
select "HTTP Connections to External Server" - > ADS
Double click there and check the all the settings " Administrations " , Technical setting , Logon and security , Special option .
Please check the log on and pass word with the help of your SAP BASIS consultant it will work fine .

Com.adobe.processingException : Problem accessing data from destination

hi guys,
i have an ECC 6.0 server(db : sql) and i am getting the below error while testing the destination service
(((com.adobe.processingException:Problem accessing data from destination
dest: fp_icf_data_isp)))
i checked rfc connection and it is working fine .
i dont remember the ADS_AGENT password for checking the user.but i have provided all the required roles for that.
please guide me to resolve this issue

Hi
When you say you checked the rfc are you refering to the one in SM59? The fp_icf_data_isp should be an entry in the visual admin of the server that runs the ADS. In the visual admin under server->services->destinations goto to the http folder and check that there is an entry with that name there. Also the address should be http://<host of abap system>:<abap http port> and the client field and username field should be filled in.
Regards
Thashin

[Fwd: Security problem accessing MBeanServer from a servlet]

Reposting to Security and Servlet newsgroups.
-------- Original Message --------
Subject: Security problem accessing MBeanServer from a servlet
Date: 10 Feb 2004 13:02:09 -0800
From: Alain <[email protected]>
Reply-To: Alain <[email protected]>
Organization: BEA NEWS SITE
Newsgroups: weblogic.developer.interest.management
Hi,
I am trying to understand how WLS 7.0 secures a call to an MBean. Got
the following
scenario:
- I am in a servlet context
- I have created and registered an MBean with the WLS MBeanServer. Fine
so far
- Within the same call I can retrieve the MBean attributes. Fine so far
- I keep the MBeanServer reference in an object global to the servlet
context
The problem:
- When I do another request and try to use the cached MBeanServer
instance to
access the MBean, I get the following error:
weblogic.management.NoAccessRuntimeException: Access not allowed for
subject:
principals=[], on ResourceType ...
Any idea?
Alain

PaulF <paulf@reply_in_newsgroup.com> wrote:
On 10 Feb 2004 13:02:09 -0800, Alain <[email protected]> wrote:
Hi,
I am trying to understand how WLS 7.0 secures a call to an MBean. Got
the following
scenario:
- I am in a servlet context
- I have created and registered an MBean with the WLS MBeanServer.Fine
so far
- Within the same call I can retrieve the MBean attributes. Fine sofar
- I keep the MBeanServer reference in an object global to the servlet
context
The problem:
- When I do another request and try to use the cached MBeanServer
instance to
access the MBean, I get the following error:
weblogic.management.NoAccessRuntimeException: Access not allowed for
subject:
principals=[], on ResourceType ...
Any idea?
AlainWhat ResourceType are you trying to access. From the Exception you're
trying to access it as an Anonymous user (principals=[]) and evidently
you're attempting to access something that is protected. I can't tell
what
from the snippet you've included.
Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/
Thanks Paul for your reply.
You are right. I can access my custom MBeans if I am authenticated for example
as an Administrator. My problem is that I want any application to access this
MBean authenticated or not. I am trying to find how I could grant permission to
this MBean to everyone. Still searching.
Thanks.

Problem accessing data from Destination: dest:FP_ICF_DATA_ SID //sap/bc/fp/

This error message has many threads. However, I have not seen any postings for NW CE 7.1. The configuration for this version of JAVA and ADS is very different from any of the documentation that we have found. We suspect a config issue but cannot find any pertinent documentation for ADS configuration and NW CE 7.1 (we are SP11).
Where can we find ADS configuration documentation for NW CE 7.1?
Please help.
So far, we are mainly using test FP_CHECK_DESTINATION_SERVICE which seems to prove that the destination configuration is the problem. Fortunately, some of the configuration was automated. But not all.

Thanks for the help, so far. I have gotten one step closer by manually starting all processes and services related to Adobe Document Services. CE 7.1 is quite a bit different.
I can now get a byte count returned with the test FP_CHECK_DESTINATION_SERVICE in SE38 without checking the "with destination service" box. When I check the box, I still get the "Problem accessing data from Destination: dest:FP_ICF_DATA_<SID>//sap/bc/fp/ message".
The problem is related to the return of the rendering service from the Java side via the Java destination service.
Note that the ABAP side with the problem is ECC 6.0 EHP3 SP1.

Can I access music from multiple accounts on one cpu?

Can I access music from multiple accounts on one cpu

Here's one option: http://support.apple.com/kb/PH12366
But frankly you'd be better off creating unique user accounts on the computer and having seperate iTunes libraries for each user as described here: http://support.apple.com/kb/ht1495

What is the easiest way to access the router from an iPad? I have no problems accessing it from my laptop. Even though I am entering the address in the left address box, not the Google search box, it wants to do either a search, or add www beginning of

What is the easiest way to access the router from an iPad? I have no problems accessing it from my laptop. Even though I am entering the address in the left address box, not the Google search box, it wants to do either a search, or add www to the beginning of the IP address.
I usually can eventually access the router, but it is way to much trouble. However, I use my iPad hundreds of times more often than my laptop.

Are you typing http:// in front of the IP address of the router? e.g. http://192.168.0.1
Sometimes, and with some routers it doesn't seem to like it if you miss off the http://

ADS, Problem accessing data from Destination

Hello All,
I'm facing an error when executing transaction TRIP.
If I use the standard Adobe form it's OK no error.
If I use a Z-form copy of this standard form (after doing customizing in PE03) I have an error message: Error while initiating travel form
When I was deeper in the debugging I found that there was an exception rose which is:
ADS: com.adobe.ProcessingException: com.adobe.ProcessingException: Problem accessing data from Destination: ...
I found some threads talking about ADS and transaction SM59u2026
When testing the connection in tx SM59 I have an error message 403: forbidden access
Is it the cause of the error generated in TRIP tx?
If yes why using the standard form works fine??
Thank you in advance for your help.
Regards,
Moez.

Hello Otto,
Yes I'm using the same user for the two forms.
It works for the standard form and not for the Z-form.
That's why I'm expecting a customizing issue to resolve this problem.
All solution that I found are talking about administration and Visual Admin tool.
Regards,
Moez.

I loaded microsoft office on my mac airbook. I have no problem accessing it from my user. When the other log on user is clicked the software icons are not avauilable. How do I have any user on my airbook have access. i.e. my wife

I loaded microsoft office on my mac airbook. I have no problem accessing it from my user. When the other log on user is clicked the software icons are not avauilable. How do I have any user on my airbook have access ? . i.e. my wife

Greetings Niel
I was able to copy down the Word, Excel and PowerPoint icons and access "however" when I exit out of the guest user it deletes them from the tool tray at the bottom.... I need them to stay there not have to copy them down..
Can you still assist?

Problem accessing hard drive for more than one user at the same time

Hello all,
I recently bought a 2nd generation AirPort Extreeme 802.11n to replace a cheapo wireless router. The main reason I wanted to get the AirPort was so I could attach a USB hard drive which holds iTunes music files Originaly I had a G4 MDD and this was a second internal hard drive. Since my wife and son also share my Mac, we stored the iTunes music folder there, so we could all access the files. That worked fine.
Then I got a early 2009 iMac and gave my wife the G4. My son also has a G3 iBook, using the wireless internet conection. At first I had the drive in an external case attached via Firewire. Both my iMac and my wife's G4 are attached to the network using ethernet, not wireless. She was able to access the music files so long as my Mac was on, but the connection was flaky.
So as mentioned, I picked up a used AirPort Extreme from OWC, mainly to attach the hard drive, since it's no longer in my Mac. It took some fiddling, and I was honestly surpsied that the APE was trickier to set up than expected, but now I have the external drive mounting, and we can all access the files from any of the Macs in the house. It works great except for one thing. If I'm logged into my iMac, and then another family member logs in on the same iMac, we don't all have access to the hard drive. It's still mounted, but the you have no permission to view the files on it.
Then if I remount it, I can access the files, but now the other user can't.
So in a nutshell, only one user can access the drive at the same time from the iMac, but we can all access it from different Macs.
Anyone have an idea of why this is happening and how to remidy it?

This is the boilerplate text often used in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
See:
http://kb2.adobe.com/cps/406/kb406793.html
Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost.

Problem Accessing PayPal from All Computers...

Hi All,
I've been searching high and low both on Google and in this forum and can't find a resolution to this.
I have an Airport Extreme and suddenly I can no longer access PayPal on either my Mac or 2 other PCs (one WinXP, one Ubuntu - "Google Chrome could not find paypal.com").
Given this is happening across all computers connected to my router it would seem the problem lies there. I reset it to the factory defaults and recreated my wireless network but the problem persists.
I can use my cell phone to create a hotspot network. When I use that network I can connect to Paypal successfully, so it would seem the problem isn't on PayPal's end.
Ideas?
Thanks very much in advance!
n

Update on the above:
I ran Disk Utility on my Mac and repaired permissions, which turned up several permissions errors related to Airport Utility. I also ran "Verify Disk" and it told me the boot disk needed repairing, which I did. I then repaired permissions again and now, unexplainably, I can access PayPal, from all computers.
Hope this helps someone.

Problem accessing variables from java file to JSP page

Hello Everyone,
I have small problem accessing my method variables from my java bean file to a JSP page. can some please take a look and tell me why I can't populate my JSP page, I've been trying all day to get this done!!!
This is my Java file
package dev;
import java.io.*;
import java.util.*;
public class RoundDetail2
public String string_gameID;
public int string_card1;
public String readDetail_topLayer;
public static final String SUITS[] = {" ", "Clubs", "Hearts", "Spades", "Diamonds", "Joker", "FaceDown"};
public static final String VALUES[] = {"Joker ","Ace", "Two", "Three", "Four", "Five", "Six", "Seven", "Eight", "Nine", "Ten", "Jack", "Queen", "King"};
public static final String SuitVALUES[] = {" ","1","2", "3", "4", "5", "6", "7", "8", "9", "10", "11", "12", "13", "14"};
public RoundDetail2() throws FileNotFoundException
DataInputStream inFile=
             new DataInputStream(
                new BufferedInputStream(
               new FileInputStream("C:/apps/jakarta-tomcat-4.0.6/webapps/ROOT/WEB-INF/classes/dev/Data_452SY2.txt")));
try {
             while((readDetail_topLayer = inFile.readLine()) != null)
          StringTokenizer tokenizer_topLayer = new StringTokenizer(readDetail_topLayer,"\t", true);
               while (tokenizer_topLayer.hasMoreTokens())
                    string_gameID = tokenizer_topLayer.nextToken();
     catch(IOException e)
                System.out.println(e.getMessage());
     Thanks KT

......How are you declaring the class in your JSP? ... are you instantiating it as a bean using the useBean tag, or just instantiating it in your code like normal.
Maybe you could post the relevant JSP code too?
Hello again,
Only the last string is populating after the file has be tokenized. What I'll like to accomplish is passing the very first string in the file. I did not get too far in the JSP file setup because the code is still in it's testing stage, but any help will be highly appreciated.
Here is the JSP code
<%@page import="dev.*" %>
<%@page session="true" language="java" import="java.io.*" %>
<jsp:useBean id="wagerhist" scope="request" class="dev.RoundDetail2" />
<html>
<head>
<title>Round Detail</title>
<body>
<table width="530" bordercolor="#000000" valign="top">
    <tr>
          <td align="left" width="19%">Game ID<%=wagerhist.string_gameID%></td>
          <td align="left" width="30%"> </td>
          <td align="left" width="20%">card1</td>
          <td align="left" width="31%"> </td>
        </tr>
</table>
</body>
</html>

Security problem accessing MBeanServer from a servlet

Hi,
I am trying to understand how WLS 7.0 secures a call to an MBean. Got the following
scenario:
- I am in a servlet context
- I have created and registered an MBean with the WLS MBeanServer. Fine so far
- Within the same call I can retrieve the MBean attributes. Fine so far
- I keep the MBeanServer reference in an object global to the servlet context
The problem:
- When I do another request and try to use the cached MBeanServer instance to
access the MBean, I get the following error:
weblogic.management.NoAccessRuntimeException: Access not allowed for subject:
principals=[], on ResourceType ...
Any idea?
Alain

PaulF <paulf@reply_in_newsgroup.com> wrote:
On 10 Feb 2004 13:02:09 -0800, Alain <[email protected]> wrote:
Hi,
I am trying to understand how WLS 7.0 secures a call to an MBean. Got
the following
scenario:
- I am in a servlet context
- I have created and registered an MBean with the WLS MBeanServer.Fine
so far
- Within the same call I can retrieve the MBean attributes. Fine sofar
- I keep the MBeanServer reference in an object global to the servlet
context
The problem:
- When I do another request and try to use the cached MBeanServer
instance to
access the MBean, I get the following error:
weblogic.management.NoAccessRuntimeException: Access not allowed for
subject:
principals=[], on ResourceType ...
Any idea?
AlainWhat ResourceType are you trying to access. From the Exception you're
trying to access it as an Anonymous user (principals=[]) and evidently
you're attempting to access something that is protected. I can't tell
what
from the snippet you've included.
Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/
Thanks Paul for your reply.
You are right. I can access my custom MBeans if I am authenticated for example
as an Administrator. My problem is that I want any application to access this
MBean authenticated or not. I am trying to find how I could grant permission to
this MBean to everyone. Still searching.
Thanks.

PROBLEM ACCESSING OWA FROM THE INTERNET TO THE CHILD DOMAIN MAIL SERVER.

Dear All,
Referring to the forum that I sent to the group sometime back which was successfully sorted. I have received a call from the users in the child domain, where they are not able to access OWA from the Internet. below is the error they are getting
Log OffOutlook Web Access could not connect to Microsoft Exchange. If the problem continues,
contact technical support for your organization.Click here to continue working.RequestUrl:
https://mail.mydomain.com:443/owa/forms/basic/BasicReadMessage.aspx?ae=Item&t=IPM.Note&id=
RgAAAADaPzSfz396RJbcAffXnu8fBwCXRKkddfkskskZ0zGXAAAAACF9AACXRKFoskTMSrrSWkkksAAAACgcAAAJUser: mynameEX Address: /o
=First Organization domain/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=myname1SMTP Address:
[email protected]
version: 8.3.348.2ExceptionException type:Microsoft.Exchange.Data.Storage.ConnectionFailedTransientExceptionException
message: Cannot open mailbox /o=First Organization domain/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/
cn=Recipients/cn=myname1.Call stackMicrosoft.Exchange.Data.Storage.ConnectionCachePool.OpenMailbox(String serverDn,
String userDn, String mailboxDn, Guid mailboxGuid, Guid mdbGuid, Object identity, ConnectFlag connectFlag, OpenStoreF
lag openStoreFlag, CultureInfo cultureInfo, String clientInfoString, Boolean secondTry)Microsoft.Exchange.Data.Storage.
ConnectionCachePool.OpenMailbox(String serverDn, String userDn, String mailboxDn, Guid mailboxGuid, Guid mdbGuid, Object
identity, ConnectFlag connectFlag, OpenStoreFlag openStoreFlag, CultureInfo cultureInfo, String clientInfoString,
Boolean secondTry)Microsoft.Exchange.Data.Storage.MailboxSession.Connect()Microsoft.Exchange.Clients.Owa.Core.
UserContext.get_MailboxSession()Microsoft.Exchange.Clients.Owa.Basic.OwaForm.OnLoad(EventArgs e)Microsoft.Exchange.
Clients.Owa.Basic.ReadMessage.OnLoad(EventArgs e)System.Web.UI.Control.LoadRecursive()System.Web.UI.Page.
ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)Inner
ExceptionException type: Microsoft.Mapi.MapiExceptionNetworkErrorException message: MapiExceptionNetworkError:
Unable to make connection to the server. (hr=0x80004005, ec=2423) Diagnostic context: ...... Lid: 13720 dwParam:
0x6BA Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x6BA Msg: EEInfo: NumberOfParameters: 0 Lid: 16280 dwParam: 0x6BA
Msg: EEInfo: ComputerName: n/a Lid: 8600 dwParam: 0x6BA Msg: EEInfo: ProcessID: 18036 Lid: 12696 dwParam: 0x6BA Msg:
EEInfo: Generation Time: 2014-12-12 12:01:11:86 Lid: 10648 dwParam: 0x6BA Msg: EEInfo: Generating component: 18 Lid:
14744 dwParam: 0x6BA Msg: EEInfo: Status: 11004 Lid: 9624 dwParam: 0x6BA Msg: EEInfo: Detection location: 320 Lid:
13720 dwParam: 0x6BA Msg: EEInfo: Flags: 0 Lid: 11672 dwParam: 0x6BA Msg: EEInfo: NumberOfParameters: 1 Lid: 8856
dwParam: 0x6BA Msg: EEInfo: prm[0]: Unicode string: MX4 Lid: 19778 Lid: 27970 StoreEc: 0x977 Lid: 17730 Lid: 25922
StoreEc: 0x977 Call stackMicrosoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, Int32 ec,
DiagnosticContext diagCtx)Microsoft.Mapi.ExRpcConnection.Create(ConnectionCache connectionCache,
ExRpcConnectionCreateFlag createFlags, ConnectFlag connectFlags, String serverDn, String userDn, String user,
String domain, String password, String httpProxyServerName, Int32 ulConMod, Int32 lcidString, Int32 lcidSort,
Int32 cpid, Int32 cReconnectIntervalInMins, Int32 cbRpcBufferSize, Int32 cbAuxBufferSize)
Microsoft.Mapi.ConnectionCache.OpenMapiStore(String mailboxDn, Guid mailboxGuid, Guid mdbGuid,
ClientIdentityInfo clientIdentity, String userDnAs, OpenStoreFlag openStoreFlags,
CultureInfo cultureInfo, String applicationId)Microsoft.Mapi.ConnectionCache.
OpenMailbox(String mailboxDn, Guid mailboxGuid, Guid mdbGuid, WindowsIdentity
windowsIdentityAs, String userDnAs, OpenStoreFlag openStoreFlags, CultureInfo cultureInfo,
String applicationId)Microsoft.Exchange.Data.Storage.ConnectionCachePool.OpenMailbox(String
serverDn, String userDn, String mailboxDn, Guid mailboxGuid, Guid mdbGuid, Object identity,
ConnectFlag connectFlag, OpenStoreFlag openStoreFlag, CultureInfo cultureInfo, String clientInfoString,
Boolean secondTry)
Your Usual support will b greatly appreciated.
Regards
Michael

Hello,
Edge server is not used for client comunication (OWA, ActiveSync etc). You should configure firewall rules to point to your CAS server or (more secure method) reverse proxy.
Hope it helps,
Adam
www.codetwo.com
If this post helps resolve your issue, please click the "Mark as Answer" or "Helpful" button at the top of this message. By marking a post as Answered, or Helpful you help others
find the answer faster.

Problem accessing Outlook from a site on one of my computers

Similar Messages

Maybe you are looking for