Problem Activate BP: Returncode 99
Hello,
i have following problem:
I have a Business Process with a switch step and a condition.
In this condition i use a XPath expression to see if one field in the message payload is != 0.
field called "ret"
now when i look at transaction sxi_cache, i see that i get Return code 99 with following error message:
'RET' is not a component of data object 'PAYLOAD'
Any idea where my problem is ?
Or where i have to search for a solution of my problem ?
Regards,
Robin
Hello Robin,
Please apply note 890760.
Best regards
Joachim
Similar Messages
-
How do I get out of this problem (Activate ipad) ?
What is happening when you try to activate? Describe the problem with some detail please.
-
SolMan 7.1 setup problem: Activate ESR
Hello experts,
I face a problem in SolMan setup activity Activate ESR (transaction ESR_ACT):
ESR: BI content data exchange setup is not successful.Extractor setup is not executed.
I have already activated Info cube 0SM_BPMRH as described in Setup Guide BP Analytics. Everything worked fine with the activation. But the problem still exists.
Can anybody tell me how to solve this problem or where I can find additional information why the activation was not successfull?
Thanks and kind regards, BastiHello,
Please access transaction RSA1 in the BI client. It will ask you to activate the content, choose activate only.
if you didn't choose a different BI client, it is the same as the one you used in solman_setup.
Best regards,
Guilherme -
Problem in SXI_CACHE ReturnCode 99
Hi Everyone,
We're encountering a problem in our Test box. The return code for one of our integration processes is still 99 even after activating it in SXI_CACHE. In our acceptance box and Dev box, the return code is 0. Everything is working fine for both the systems. The error is in the test box only (dev -> test -> acceptance). We have tried reactivating the whole SCV and transporting but it did not work. We have also tried reactivating the Integration process in ID, and transporting it but still no luck. We have also tried the various suggestions in the forum but we're still having an error.
The error message in SXI_CACHE is :
E For http://xxx yyy there is already definition ZXI_PROXY_xxx
E For http://xxx yyy there is already definition ZXI_PROXY_yyy
S --- Translating step type 'RECEIVE' with ID '3' ---
E No container definition available
S --- Translating step type 'SEND' with ID '9' ---
S --- Translating step type 'SEND' with ID '18' ---
Any suggestion is welcome.
Thanks.1. make some dummy change to the IP in IB
2. if not works then re-import the IP in IB (delete and re-import) -
Problem activate the activity in NWDS
Hi,
when i am trying to activate an activity in NWDS and i have got the error msg:
javac] Compiling 84 source files to /usr/sap/SMT/DVEBMGS01/j2ee/cluster/server0/temp/CBS/37/.B/2105/t/1238F068412A57C9CB6DCB1CF7C68E64/classes
[javac] ERROR: /usr/sap/SMT/DVEBMGS01/j2ee/cluster/server0/temp/CBS/37/.B/2105/DCs/tmobile.at/PBTOOL_APPL/_comp/src/packages/tmobile/appl/sec/PermissionsPBT.java:9: package com.sap.security.api.permissions does not exist
[javac] ERROR: import com.sap.security.api.permissions.NamePermission;
[javac] ERROR: ^
[javac] ERROR: /usr/sap/SMT/DVEBMGS01/j2ee/cluster/server0/temp/CBS/37/.B/2105/DCs/tmobile.at/PBTOOL_APPL/_comp/src/packages/tmobile/appl/sec/PermissionsPBT.java:17: cannot resolve symbol
[javac] ERROR: symbol : class NamePermission
since than i am not able to activate any new activities.
can some one please help me?
Thank you
regrads
MilenHi Jessica,
It seems that you have not configure Debuger in NWDS.
1. Click on or Open Debug perspective
2. Open Debug configuration from menu or from clicking on Icon in top level menu.
3. From Left side expand Remote Java Application
4. Click on New Button from bottom left Corner.
5. Give Any name e.g. My Debug.
6. You have 3 tab on right side Connect, Source and Common
7. Click on Connect
8. Click on Browse from project to debug.
9. Select crmhomeshr
10. Connection Type should be Standard (Socket Attache)
11. Give Host name and Port. Generally port # is 50021 but it may different on your machine.
12. Click on Source Tab
13. Click on Use Default source lookup path
14. Click on Common tab.
15. Type of launch configuration should be local
16. Debug Mode should be Default
17. Select Debug in Display in favorites Menu.
18. Click on Close.
Before start your ISA application on debug mode you have to click on "Debug" icon from top menubar and select your created My Debug configuration. It will establish connection with your J2EE engine and switch to debug mode.
Now access your applicationi n browser. When it hits debug command it automatically switch or transfer control to NWDS Debug window and you can go forward from there.
I hope this information will help you to configure Debug in NWDS for ISA.
eCommerce Developer -
Vendor card creation problem & activate reconciliation ledger
Hi
I have configured the controlling and but not able to activate the Reconcilation ledger account, due this issue may be i am not able to create the vendor , so please sone help me below issue
1) when i activate the reconcillation ledger , i am getting this message **New General Ledger Accounting is active**
2) when i am create the vendor card in that item required the vendor reconciliation account , and i not geeting the account the list,
so please help me how to resolve the issue
thanks
regards
B.S.FartiyalHi
Recon account is a balance sheet type GL account. Create a GL account with account group as reconcillation account and field status group as reconcillation accounts (G067) in FS00 and then assign it in vendor mater.
Thanks -
Problems activate prepaid card
I have a prepaid card 12 month membership for illustrator and photoshop. And does not active. Said invalid key????
pipokainc,
Have you used a 30 days trial?
If not, you may do that while you get things sorted.
Download a free trial or buy Adobe products | Adobe downloads -
I need its aid, I have a problem activates 0material of business content 3.5.2 and marks the following error to me "material for Settings to number conversion found"
hi,
there is solution
execute report (transaction se38) RSCC_V_TMCNV.
Set the length of 0MATERIAL and change conversion to alpha:
Re: Error Installing 0MATERIAL from Business Content -
EXTREMELY HIGH URGENT!!!
Hi! SAP GURUS!
We've got the following trouble:
Event Type: Error
Event Source: SAPDB:T11
Event Category: Fast
Event ID: 18606
Date: 24.03.2008
Time: 17:18:47
User: NT AUTHORITY\SYSTEM
Computer: SAP-1
Description:
The description for Event ID ( 18606 ) in Source ( SAPDB:T11 ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: SAPDB - T11; :
- ERROR TID: 0xE0 PID: 0xEC8 MsgID: 18606
; Could not find account name, Location: 1, rc = 1789.
What is the problem and what the solution can be?Hi Anton,
as forums cannot guarantee quick answers please don't shout words like "extremely high urgent" and abuse the exclamation marks...
Instead (if you're are SAP customer): open a support message. If it is really an emergency, set the priority to very High - the message will be answered.
About your technical problem: well the returncode (rc = 1789) points to some network authentication issues.
Perhabs you should check MS technet [here|http://support.microsoft.com/?scid=kb%3Ben-us%3B823659&x=11&y=9] (scroll down or search for 'error 1789').
KR Lars -
Transformation step in Integration Process
Hello Everybody,
I have used a transformation step in Integration process to transform source structure to target structure. In the same block i have used control step to cancel the process if there is any error found in transformation. I am handling this by raising exception.
Now my problem is, i found my message got failed in PE and it is showing that there is error in mapping, i took the copy of corresponding message from SXM_MONITOR and tested the mapping program, It executed successfully but the Integration process is showing that there is an error in mapaping.
Please let me know your thoughts, urgent.
Edited by: vijay thirumareddi on May 9, 2008 2:28 PMhi
same mapping behaving differently !!
make sure that in bpm u r using exactly the same message mapping.
could be due to cache refresh problem. activate the message mapping again. also check the cache notifications.
if it still do not works then do a full cache refresh.
rgds
arun -
Broken pipe error in Sync Send JDBC Receiver: Extremely Serious issue
Hi forum,
I have a serious error in a JDBC->XI--> JDBC scenario,
Step1: I use a sender JDBC channel to select some distinct values from a table say X, and update the same rows,
Query SQL Statement: select distinct Branch from dbo.X where status = 0
Update SQL statement: update dbo.X set Status = 2 where Status = 0
Step 2: enter BPM
Step 3: enter a loop
Step 4:make a synchronous call to the same table X, to fetch some records,
SQL query: select * from X where status = 0 and Branch = i; Update X set status = 9 where Branch = i
Step 5: close loop, this loop iterates for 5 or 6 times depending on i, which is no. of branches selected by the sender JDBC channel
so all the calls are to the same table, same databsse(SQL Server)
the problem is when this sync calls happens in the loop, it some times gives following error, which i se in RWB:
<b>Error Unable to execute statement for table or stored procedure. 'X' (Structure 'STATEMENT_X') due to com.microsoft.sqlserver.jdbc.SQLServerException: An exception occurred during the DBComms.transmit operation. Exception:Broken pipe (errno:32). Context:(2217)</b>
i have no way to trace the cause of the error, the database is perfect and the error logs in the SQL server shows no trace of any error,
Note: It works sometimes
i dont know whom to approach, pls help
the issue is very very serious as its in production system,Hi Sudeep,
SAP Note 846079 - XI 3.0 JDBC Receiver: # of Retries on SQL Error w/o Effect
Please check the following SAP note also - 831162
Some info which i found there and can be relevant in to your scenario.....
Q: I am using a JDBC Receiver Adapter in conjunction with the Lotus Domino Driver for JDBC perform an INSERT or UPDATE operation on a database. When sending a message to the receiver, the Adapter Monitoring shows the following error message:
"java.sql.SQLException: [Lotus][Domino Driver for JDBC]Invalid cursor state"
Is there a fix for this issue?
A: To work around this JDBC driver problem, activate the Advanced Mode for the respective JDBC Receiver channel and configure the setting "Number of Retries of Database Transaction on SQL Error" to a value > 0. Additionally, make sure that the setting "Database Auto-Commit Enabled" is also active as the Lotus Domino Driver for JDBC does not support transactions.
Apply note 846079 before configuring this scenario.
Q: The TCP/IP connection to my database host is running over an unreliable network connection, i.e. the connection is sometimes interrupted. Consequently, I sporadically receive an SQLException regarding a closed connection in the system trace or audit log or the connection as well as the JDBC Adapter channel are hanging.
How can I work around this connectivity issue?
A: Enable the "Advanced Mode" for the respective JDBC Adapter channel and select the option "Disconnect from Database After Processing each Message".
Note that this might put additional load on your DBMS due to the creation of a new database connection for each message.
I dont have access to a database right now, so i am not able to check this.
Also check the JDBC driver compatability as mentioned in the above note.
Cheer's -
Broken pipe error in plugin log
Hello All,
Any help will be much appreciated.
Currently we have a webserver and weblogic servers(two) in the same box. The webserver
is IPlanet and it communicates with weblogic(7.0 SP2) using the weblogic plug-in.
Normally the webserver connects to the first weblogic server and subsequent request
were sent to the same weblogic servers. While doing so, the plugin hits a broken
pipe error and it failover to the second weblogic server. We do not know the cause
of this problem as there is no broken pipe errors in the weblogic server logs.
I changed the weblogic & plugin configurations and did various tests using the
following configuratons, but no luck.
Weblogic plugin configurations:
1. HungServerRecoverSecs to 5000,
2. WLSocketTimeoutSecs to 5000
3. KeepAliveSecs="120" ( by default KeepAliveEnabled is true)
4. ConnectTimeoutSecs="120" along with ConnectRetrySecs=2 ( i.e. 60 connections
before it throws HTTP 503- Service Unavailable exception).
Weblogic server configurations:
1. Post Timeout Secs: 120(max)
2. T3 Message Timeout: 480(max)
3. HTTP Message Timeout: 480(max).
The plugin log file contents are below:
Thu May 13 09:35:25 2004 INFO: sysSend 1247
Thu May 13 09:35:25 2004 INFO: sysSend 139
Thu May 13 09:35:25 2004 ========= errno [32] msg [Broken pipe]
Thu May 13 09:35:25 2004 POST timed out to the server 10.227.8.47:8101
Thu May 13 09:35:25 2004 *******Exception type [POST_TIMEOUT] (POST timed out
to the server 10.227.4.33:8101
) raised at line 731 of proxy.cpp
Thu May 13 09:35:25 2004 failure on sendRequest() w/ recycled connection to 10.227.4.33:8101,
numfailures=1
Thu May 13 09:35:25 2004 Marking 10.227.8.47:8101 as bad
Thu May 13 09:35:25 2004 Marking [0] as bad WLS: 10.227.8.47:8101:65535
Thu May 13 09:35:25 2004 got exception in sendRequest phase: POST_TIMEOUT: [os
error=32, line 731 of proxy.cpp]: POST timed out to the server 10.227.8.47:8101
at line 1051
Thu May 13 09:35:25 2004 Failing over after sendRequest exception
Thu May 13 09:35:25 2004 attempt #1 out of a max of 5
Thu May 13 09:35:25 2004 Server details are 10.227.8.47'/8101/65535
Thu May 13 09:35:25 2004 Server was mark bad, going to next server
Thu May 13 09:35:25 2004 Server details are ''/0/0
Thu May 13 09:35:25 2004 Server was mark bad, going to next server
Thu May 13 09:35:25 2004 general list: trying connect to '10.227.8.47'/8103/65535
at line 1338 for '/callWebApp/application?pageid=NewCall&portletid=CompleteCall&portletns=CompleteCall&wfevent=CompleteCall.showContactAction'
Thu May 13 09:35:25 2004 INFO: New NON-SSL URL
Thu May 13 09:35:25 2004 Going to check the general server list
Thu May 13 09:35:25 2004 WLS info : 10.227.8.47:8103 recycled? 0
Many thanks
ShaanHi Sudeep,
SAP Note 846079 - XI 3.0 JDBC Receiver: # of Retries on SQL Error w/o Effect
Please check the following SAP note also - 831162
Some info which i found there and can be relevant in to your scenario.....
Q: I am using a JDBC Receiver Adapter in conjunction with the Lotus Domino Driver for JDBC perform an INSERT or UPDATE operation on a database. When sending a message to the receiver, the Adapter Monitoring shows the following error message:
"java.sql.SQLException: [Lotus][Domino Driver for JDBC]Invalid cursor state"
Is there a fix for this issue?
A: To work around this JDBC driver problem, activate the Advanced Mode for the respective JDBC Receiver channel and configure the setting "Number of Retries of Database Transaction on SQL Error" to a value > 0. Additionally, make sure that the setting "Database Auto-Commit Enabled" is also active as the Lotus Domino Driver for JDBC does not support transactions.
Apply note 846079 before configuring this scenario.
Q: The TCP/IP connection to my database host is running over an unreliable network connection, i.e. the connection is sometimes interrupted. Consequently, I sporadically receive an SQLException regarding a closed connection in the system trace or audit log or the connection as well as the JDBC Adapter channel are hanging.
How can I work around this connectivity issue?
A: Enable the "Advanced Mode" for the respective JDBC Adapter channel and select the option "Disconnect from Database After Processing each Message".
Note that this might put additional load on your DBMS due to the creation of a new database connection for each message.
I dont have access to a database right now, so i am not able to check this.
Also check the JDBC driver compatability as mentioned in the above note.
Cheer's -
Powerpoint always crashing now
I have the latest OS, the latest updates to Office X. I have tossed the plist for powerpoint. I have not tried uninstalling and reinstalling Office as Word and Excel work fine right now. I have run permissions, run first aid on the disk and everything is fine.
Does anyone have an answer?
Powerpoint opens the file and as soon as you see the file come up, it crashes every time, with every file.Hi Casey,
By pure coincidence I have just been reading Kurt Lang's Font Management in Mac OS X Tiger and Panther in an attempt to wise up on the issue. (To be honest I'm none the wiser, but that's not Kurt's fault…)
If you scroll to his 'Known Issues' 2c there is a possible solution to your problem, viz: "If you have already attempted to run PowerPoint after updating to 11.2.x without AppleGothic.dfont active, then you have already discovered that PowerPoint crashes after clicking the Open button at the Project Gallery. To fix this problem, activate AppleGothic.dfont. Run PowerPoint again."
Good luck,
Adrian -
E72 problem to activate silent mode with 031.023
now it is very difficult to activate silent mode with the ctrl key !
I think this is not a bug, but a fix. In the previous FW it was TOO easy to switch to Silent mode and that would happen quite often by mistake (at least to me).
So I think that Nokia corrected this problem, but did not communicate properly with their customers....
2110i, 6150, 6210, 6310i, 6670, 9300, 9300i, E90, E72, HTC Touch Pro2, Samsung Galaxy S, Samsung Galaxy S II -
please help me < when update my i phone 3G < i finish update but face problem , appear me msg There is no SIM card installed in the iPhone You ar attempting to activate. Please disconnect
Sounds like your phone was hacked to use with your carrier. Updating it has relocked the phone to it's original carrier. You will not get the phone working again without a SIM from the original carrier.
Maybe you are looking for
-
How to create custom BOL object for dynamic query in CRM 7.0
Hi, Could anyone please explain me with steps that how to create the custom BOL object for dynamic query in CRM 7.0, I did it in previous version but its throwing exception when i try to create the object of my dynamic query class. I just defined the
-
hi friends we maintain info record for aggregates with one vendor permanent basis. whenver i making PO with items by default taking tax conditions and price. its Okey. But i am trying to Preview that PO rate and discout and amount not showing.
-
WebLogic 7.0sp4 - deploying EAR from 6.0 - Console Servlet causes OutOfMemoryError
I downloaded various copies of WebLogic. I'm trying to work with WebLogic 7.0sp4 on a Windows 2000 Server machine, but it's not working well at all. I have a very simple set-up - one JDBC connection pool to an Oracle database, and one EAR file. This
-
R11i set up impacting use of new functionality in R12
Client has asked if there is any fixed setup in 11i that will prevent the use of new functionality in R12. I can't see anything in the upgrade manual, but if anyone has any information they could share
-
I was installing the newest version of Microsoft Office Home & Student 2013 and noticed that the tutorial had no audio. After installation was complete, I had no audio at all on my new HP Envy laptop, whereas I had no problems beforehand. I get this