Problem activating integration model

Hi,
      We have a integration model for Purchase orders and Purchase requisitions, PLanned orders, Manual reservations and production/process orders.
In CFM2, when I activate, it is taking forever to activate.
Here is what I see in CFM2 details:
POs and PReqs     (2.503 no.s)
Planned Orders     (2.503 no.s)
Manual Reservations     (2.503 no.s)
Production/Process Orders (2.503 no.s)
The system has a clock moving in the left bottom corner with the message "Transfer Model type : Purchase orders and purchase Requisitions) and it's taking forever.
I checked this [thread|Problem with activating integration model]. I don't have access to BD22.
ANy other ideas on how I can complete this activation?
Are 2503 too many??

Hi Visu,
Can you split the intregration model for each object and schedule the activation in background through CFM3.
if there is any failure can see problem through SLG1.
Manish

Similar Messages

  • CIF Queues generated without active integration model

    Hello All,
    We are facing a unique issue, where queues are seen in SCM queue manager although those products are not there in any active integration model for transaction data.
    The scenario is as follows:
    1. We are CIFing only master data as we have only DP and release to R/3
    2. There is active integration model for master data
    3. There is no integration model for transaction data
    However in SCM queue manager, I am seeing queues of type CFFCC "Location" "Product".
    The function module name is /SAPAPO/CIF_IRQ_REDUCT_INBOUND.
    We observed in R/3 that the goods movement transaction code MB1A is trigerring TRFC's which is generating the queues.
    Has anyone encountered a similar scenario like this?
    Regards,
    Kedar

    Oi Jackeline!
    Hello, all!
    I think Vikas got the point, but let me be more specific...
    The transfer of requirement reduction depended in previous releases (until PI 2002.1) only on an integration model for material master data being active. Then a new type of integration models was created to control the sending of requirement
    reduction.
    To activate the new logic a flag has to be set in customizing.
    Use transaction /CFC9
    OR
    R/3 SAP Customizing Implementation Guide
    -> Integration with Other SAP Components
    -> Advanced Planning and Optimization
      -> Application-Specific Settings and Enhancements
       -> Settings and Enhancements for Requirement Reduction
        -> Evaluate the Requirements Reduction Filter Object Type:
    Then, flag 'Filter Object Requirements Reduction'
    If you set this flag no queue of type CFFCC* will be sent if there is no explicit active integration model for Requirements Reduction. Please set this flag in production and delete any existing queues of type CFFCC*. No new such queues should be created in the future as long as you don't activate the transfer via an integration model.
    I hope this information helps to clarify this issue.
    Please give your feedback concerning the given solution.
    Thank you!
    Will

  • Destination system cannot be used for classic qRFC by activating integration models

    Hi All,
    I am trying to connect ECC Release 702 to SAP TM 8.0 but by activating integration models(CFM2) i got following runtime error:
    Error analysis
        Short text of error message:
        Destination TMCLNT100 cannot be used for classic qRFC
        Long text of error message:
        Technical information about the message:
        Message class....... "SR"
        Number.............. 320
        Variable 1.......... "TMCLNT100"
        Variable 2.......... " "
        Variable 3.......... " "
        Variable 4.......... " "
    any one has idea how to solve that?
    Thanks a lot!
    Kind regards
    RW

    RW,
    I am definitely not an expert on SAP Transportation Management.  However, maybe your destination system has been set up as bgRFC instead of qRFC?
    bgRFC (Background Remote Function Call) - Connectivity - SAP Library
    Best Regards,
    DB49

  • Problem with activating integration model

    When I am trying to activate an integration model, that includes a scheduling agreement (type LF), the activation isn't successfull. It isn't blocked, but it never stops.
    In the screen I have a message called "determining delta model" but it never continous with executing the activation.
    Does anybody know what could cause this problem?
    thanks in advance
    Mark Smeets

    Hi,
    I am facing the same problem as mentioned in the original post.
    Whenever I activate the integration model for vendors, a "CIF_LOAD" window appears with message "Should interval be created" with YES and NO option. Why does this window appears. After clicking on NO option the message "Determining delta model" appears in the status bar and after some time the program gets terminated due to time out.
    I have tried following solutions mentioned in this thread.
    Refreshed the indexes of the two tables BDCPS and BDCP using DB20.
    Executed the transaction BD22 in test run mode, but I am not sure which change pointers option(obsolete or processed) to select for deletion and also which message type. I selected the obsolete option but here too the program got terminated after time out. Besides I am doing this on prduction environment and other integration models like plant etc got activated.
    Please help us with this.
    Regards,
    Gaurav Patil

  • Transfer of material from R/3 to APO, Problem in Integration model

    Hi
    I have created Integration model for Transferring material from R/3 to APO.
    While  activating the model, it is giving error  with status as i..e. SYSFAIL
    On clicking the status, I am getting the following message
    "Logical system R3CON does not assigned to Business System Group"
    ?Where to locate the BSG in  R/3 and assign before transferring  matl to APO
    i require the steps&help  to solve the problem.
    Thanks in advance to all members for the help.
    Srikanth

    Dear Srikant ,
    Pls check you have followed the below steps in the same sequence for R3 and APO
    <u>CIF Settings in R/3</u>
    Check ALE settings or activate ALE settings          
    •Define the logical system               <b>BD54</b>
    •Assign logical system to a client               <b>SCC4</b>
    Set the RFC destination               <b>SM59</b>
    <i>Assign target system and queue type          <b>CFC1</b></i>
    Maintain the SAP APO release               <b>NDV2</b>
    Activate BTEs for SAP APO integration          <b>BF11</b>
    User parameters for CIF               <b>CFC2</b>
    <u>CIF Settings in APO</u>
    Check ALE settings or activate ALE settings          
    • Define the logical system               <b>BD54</b>
    • Assign logical system to a client          <b>SCC4</b>
    Set the RFC destination                <b>SM59</b>
    Set up business system group     
    –Create BSG                <b>/SAPAPO/C1</b>
    –Assign logical systems to BSG          <b>/SAPAPO/C2</b>
    Maintain distribution definitions               <b>/SAPAPO/CP1</b>
    User parameters for CIF               <b>/SAPAPO/C4</b>
    You have got stuck up somewhere in R3 setting , which I have marked in italic font i.e.<i>Assign target system and queue type          CFC1</i>
    I hope this will solve your problem .
    Thanks ,
    Digambar

  • Error activating integration model in APO

    Hi,
    I would like to have a solution to the folowing problem.
    I've tried to activate integration models in ECC with transaction CFM2.
    I've build several integration models for class, customer, masterdata and transaction data.
    When I try to activate one of these integration models the system gives the next error message:
    outbound queue blocked
    Function/Q/SAPAPO/CIF_CBASE_INB
    Text:        Reference product has not been classified
    I would like to know what causes the problem and how to solve this problem.
    I hope to receive an answer soon.
    Thanks for the help!
    kind regards,
    Marco

    Hi,
    A program enhancement allows you to exclude the relationship between a product and a reference material from the transfer.
    The prerequisite for this solution is that this "reference material for materials that can be packaged in the same way" is not required in SCM and is not relevant for the transfer.
    Procedure:
    Start transaction SMOD. Display the components of enhancement CIFMAT01. On the following screen, double-click function module EXIT_SAPLCMAT_001 (user exit '001' of function group 'CMAT', program SAPLCMAT). In the program editor that appears, double-click include ZXCIFU01. You may have to create the inlcude again if necessary. Implement the system response you want in this include (follow the sample coding given below).
    Example:
    DATA: LS_MATKEYX TYPE  CIF_MATKYX.
    LOOP AT CT_CIF_MATKEYX INTO LS_MATKEYX.
      if link_to_RMATP_needed = 'X'.
        continue.
      endif.
       clear LS_MATKEYX-EXTRMATP.
       MODIFY CT_CIF_MATKEYX FROM LS_MATKEYX.
    ENDLOOP.
    Regards
    Vinod

  • Error Message while Activating Integration Model for PDS

    Hi,
    When we are trying to activate IM for SNP subcontracting PDS,it gives us an error message
    "No authorization to create Product ".
    All master data for that particular Product,plant and Subcontractor are in place in APO.
    Product is  also extended to Plant and subcontractor.
    T-lane is also thr in APO which got created via CIF (Subcontracting Purchasing Info record).
    Need your expertise.
    Regards
    Abhi

    Hello Abhi..
    recently I have faced same problem. If you are facing problem for particular product location, I would suggest
    1) Delete the particular Product master globally in APO  & re cif data
    if doesnot work, then problem must be with authorization
    Please revert in case of any issue
    Thanks
    Mangesh A. Kulkarni

  • Requirement Reduction integration model

    Hi,
    Can someone explain in layman terms with an example what happens when "requirment reduction" object is CIF'd alongwith Planned independent Requirements (to APO). Why should/would someone create an integration model for requirement reduction when integration models exist for PIRs and Sales Orders consumption settings are taking care of netting (as applicable/set). we have funtionalities for consumption and reduction of sales orders from PIR's e.g in APO and ECC.
    Thanks
    Lok

    Hello,
    I would like to see a clear explanation to that as well.
    From what I understand reading about this topic it is to have additional control over this by applying own logic in CIF.
    Quoting the SAP documents:
    <<If you set this indicator, you can create integration models specifically for
    the Requirements Reduction filter object type (type T_FCC).
    The filtering takes place on the basis of active integration models for
    requirements reduction. In this case, you can control in greater detail for
    which material-plant combinations a requirements reduction should be transferred
    to SAP APO.>>
    For normal cases this is not needed. Perhaps it is needed if you want certain shipments to other plants to reduce forecast. E.g. mixed MRP.
    Regards,
    Tor

  • APO Integration model error

    Hi all
    when activating Integration model in R/3 with APO below error is coming
    "Outbound queue blocked"
    System:APOCLNT800,USER DDIC 09.02.2008 13:28:15
    Function:/SAPAPO/CIF_LOC_INBOUND
    Text:Host name: "XXXXXX"unknown/CPI-C error CM_Product.
    when we click QRFC monitor  lot of queues are there..
    can any boby give solution for this
    Regards,
    srihari

    Hi Somanath
    Our basis consultant checked   every thing in SM59  and he told every thing is ok.
    In QRFC monitor lot of queues are there how to handle/delete the queues   .. i tried  but not able to resolve.
    Regards,
    srihari

  • EWM-ECC  CIF Integration model

    Hello All,
    I want to tansfer data for plant,shipping point,customer and vendor from ERP to EWM.For this I have created Integration model.When I am trying to activate this I could not as I am getting message like'Queue for current initial data transfer is deregistered-Tgt System: APOCLNT800-Deregistered Queue' and hence Inbound queue blocked.
    What could be the reason for this message. How to unblock this Inbound queqe?
    Thanks,
    Shailesh

    Hi  James,
    Thanks. But this error is due to queue 'CFLD*  System is not activating integration model and showing error like this'Operation terminated due to error (queue CFLD*, target system APOCLNT800)'
    In SMQR I could not find this queue to acivate ,I tried in SMQ1/SMQ2, but I could not find this queue.
    Do I need to create this queue? I yes I am unkown T.code for this. Do you have any idea?
    Thanks,
    Shailesh

  • Integration model desnot exist

    Hi,
          I got a error in delta report with the message
    No active integration model exists in R/3
    Message no. /SAPAPO/CIF184
    The material in the plant has a change pointer "R". What does the "R" Change Pointers Exist with Method "Delete Complete Document" mean?
    Is it saying that the location product is scheduled for deletion? Is there a check box checked in APO for deletion??
    Also there is an active integration model with that product, location combination.
    What does the message mean then???
    Thanks.

    You can always check for deletion flags in table /SAPAPO/LOC (check for deletion flag field LVORM) and /sapapo/MATLOC (check for deletion flag field LVORM)
    Change pointer R means Completely Delete Document. This happens when someone deleted an order in APO and the same order deletion has not yet transferred to R3 due to some reason. The reason could be that you have set up change pointers in the system to stop automatic deletion transfer of orders or the fact that integration model does not exist.
    So either make sure you have an active integration model setup for the product or get rid of the change pointer using /sapapo/c5 transaction

  • Integration Model got cancelled

    Hi,
    We are running the deactivation or activation of integration model in Program.if any SYSFAIL(Example: SQL error) occur in E.C.C outbound queue suddenly the active integration model has got fail.please guide me on this.. Why this happend and solution for the above?
    thanx,
    C.Parthiban

    Hi,
    -Go to transaction /SAPAPO/CQ check the Q no.
    -Go to SMQ2 or SMQ1  (depending on Direction flow)
    -Check for SYSFAIL entries
    -by Double clicking go in and try to analyse the Q error .
    Before activation of any integration model normally you should make sure that CIF Qs are clear.
    Regards
    Samir

  • Problem with activation of integration model

    Hi,
    I am facing a problem. Whenever I activate the integration model for vendors, a "CIF_LOAD" window appears with message "Should interval be created" with YES and NO option. Why does this window appears? After clicking on NO option the message "Determining delta model" appears in the status bar and after some time the program gets terminated due to time out.
    I have tried following solutions.
    Refreshed the indexes of the two tables BDCPS and BDCP using DB20.
    Executed the transaction BD22 in test run mode, but I am not sure which change pointers option(obsolete or processed) to select for deletion and also which message type. I selected the obsolete option but here too the program got terminated after time out.
    After this I selected  the message type "CREFET" (Get Vendor Data), "CRECOR" (Core vendor master data distribution), "CREMAS" (vendor master data distribution) but there were no change pointers for this message type.
    Besides I am doing this on prduction environment and other integration models like plant etc got activated.
    Please help us with this.
    Regards,
    Gaurav Patil
    Edited by: Gaurav Patil on Sep 29, 2008 12:35 PM
    Edited by: Gaurav Patil on Sep 29, 2008 12:36 PM

    Hi Gaurav,
    Please split the volume in multiple jobs and see wheather it is running fine or not ?
    Also please check CFG1 log on R/3 side .
    Also check SLG1 log on APO side .
    Manish

  • Purchase Order Integration Model Activation Error "Source Invalid"

    Hi Experts,
    When I try to activate Purchase Order CIF integration model for a specific plant, I am getting an error
    "SOURCE_INVALID" r                                    XC           014
    When I checked failed LUW, found one product which is Subcontracted.
    These a Subcon PO exist at this plant and Vendor is Subcon Vendor.
    Before IM activation, I have CIFed Subcon vendor and T-lane between Vendor to plant exists in APO.
    Any idea how can I resolve this issue?
    Thanks,
    Vipul

    Hi Vipul,
    I hope you have created subcontracting purchasing info record and connected with the productuon version.
    Secondly whether it is valid.
    A purchasing info record of the category subcontracting which documents the subcontractor as the source of supply of the end product.
    Regards
    Datta

  • Integration model activation issue - After Prod to Quality refresh of R/3

    Hi Guys,
    Our R/3 quality system refreshed from production. Hence all the integration models Logical system pointing APO production system. Mistakenly I deactivated all the integration model in R/3 Q system which having APO Production logical system.
    All the IM in R/3 quality system are inactive. When try send material getting error message "relavent location doesn't exist".
    For that try to move the Location getting error message "Location already exist in APO Quality" system.
    Now I want to active the all the Plant, material.etc integration models. Please let me know if any more information and help to overcome the issue.
    Thanks,
    Saravanan V

    Saravanan
    Make a table level change and set the integration model flag as active in the table CIF_IMOD. This will help you solve the issue .
    Go to transaction SE16 . Give table name as CIF_IMOD. Give the name of you integration model and execute . Now all versions of that integration model will be displayed ( this will happen if you have many inactive versions and do not have the RIMODDEL program to delete inactive IM's) . Choose the latest version and go to change mode  and set the value of "Entry is active"  (technical name ACTIVE) field to  I.
    You can take help from development team if you do not have authorization to SE16
    Thanks
    Saradha

Maybe you are looking for