Problem adding a new field to existing BPS planning layout

Hi
I am new to BPS and planning
I have a requirement to add a new field which has values maintained as 0 and 1 to an existing planning cube.The user wants this new field in the existing planning layout where in he can enter the values for this field as 0 or 1.I have created a new field and maintained values for this field as 0 and 1.I have added this field to the existing planning area and have created variable with fixed value with range 0 to1.I have added the same in selections in existing planning level and package as well along with other existing selection conditions.
In additional functions of adhoc package they have made setting as set to all possible char combination.
In this planning area all the selections are locked in planning level and package.
Now when i execute the planning layout to enter data,my new field is grayed out,it does not allow me to enter the values.need help with this as to how can i make this field input enabled.This is an independent characteristic.
Thanks
Panchan

Hi,
Yu need to delete the data to fill the new field again.
Assign points if it helps
Regards,
Srinivas

Similar Messages

Adding a new field to existing structure

HI all
I am adding a new field to the existing structure in BW ,shall I remove all the data in the cube to fill fill this field for the previous records and reload again or any other solution
thanks in advance

Hi,
Yu need to delete the data to fill the new field again.
Assign points if it helps
Regards,
Srinivas

Adding a new field in existing Genric Func Module extractor

Hi,
I have created a generic data source of type 'Transaction' with Function module and it was working fine and loading data into ODS succesffuly . Recently I needed to add one field.
I have enhanced the function module and the extract structure accordingly. However I am not sure what next to do to have that new field visible in the data source.
I went to transaction SBIW --> Maintain Generic data source in change mode. However I am not able to see the newly added field in there.
Need help.
Thanks

Hi,
Just check the ROOSFIELD table in se11 for your datasource. Possibly the newly added field is hidden. You can execute this code and the field would appear in RSO2.
tables ROOSFIELD.
update ROOSFIELD set SELECTION = 'X' where
Datasource = ' <Data source>'
and field = '<your field>'.
This would make the field appear in RSO2/RSA6.
Bye
Dinesh

Change Pointers - adding a new field to existing Change Document

Hi,
We have a requirement to capture the changes made to the Material object through the transaction C223. The changes to field MKAL-PRFG_F have to be captured.
There is an exisitng Change Document Object - MATERIAL. This is included in Message Type MATMAS. These are the steps we have done:
1. In SCDO - added the Z structure to the Change Document Object - Material. [Z structure contains the field MKAL-PRFG_F. Change pointer option is checked for this Data element.
2. Created a Z Message Type with reference as MATMAS.
3. In BD52 - we have listed the fields for the new Z Message Type created.
4. The Change Pointers - reactivated after the steps are done.
The changes to the field MKAL-PRFG_F through C223 Tcode are not recorded in BDCPV table.
Have we missed any steps here?
Thanks,
Pallavi

HI,
I don't think a new zmessage type is required in this case.. is the structure added to MARA table??The change document programs are there which triggers the iodcs... In SCDO transaction code , click on generation info for MATERIAL.. You will find the includes. The FM MATERIAL_WRITE_DOCUMENT creates entries in CDHDR and CDPOS, if we maintain entries in BD52 , the entries wil be written in BDCP and BDCPS tables.
Try to add your structure in MARA table as append strucre and then you can debug the IDOC from WE19 and use the FM "MASTERIDOC_CREATE_SMD_MATMAS" and then you also need to switch on Update Debugging on, to debug the changes in update FM MATERIAL_WRITE_DOCUMENT.
Please see if the change is reflected or not....
ELSE.
may be you need to create a new entry in SCDO and do all the ALE configurations for change pointers.
Please find the link for change pointers and also you can get lot of information on change pointers in SCN.
http://help.sap.com/saphelp_nw70/helpdata/EN/12/83e03c19758e71e10000000a114084/content.htm
Regards,
Nagaraj

Adding a new field to Existing data Datasource

Hello,
If I want to add extra field to the existence Data Source in SAP R/3 how will you do? and how will you extract the data in SAP BW .could you please explain the steps. I would appreciate.
Thanks in Advance.
Sri

1)Go to RSA6 and find the data source you need to enhance.--> Display
2)Double click on the Extract structure.
3)Now click on the append structure button to add the required field on to the existing structure.
4) add your required fields with ZZ appended to your field.
5) Save & Activate the append structure. Then go back and make sure you activate the extract structure also.
6) Now again go back to RSA6 and select your Data Source. But this time go to change Data Source to remove the hide option to the enhanced fields. By default theyll be in hide mode. If you dont remove the hide field then this field will not be seen in BW side.
7) Now go to SE38 to write the logic to populate the data into the enhanced field. Program name to write the logic is ZXRSAU01.
8) Check + Save + Activate.
9) Check in RSA3 if data is populated as per your requirement.
10) Replicate your Data Source.
11) Now go to Data Source/ Trans. Structure screen. Now you can see the enhanced field on the right hand side.

Adding new fields to existing cube

Hi all,
We have a cube with data, now we added 2 new fields to the datasource. And want to add two more fields in the Cube to correspond to the new fields. What would be the impact on the data that is already there in the cube? Can I go ahead and add the fields in the cube and start extracting data? What I want to know is what would be the implications in such a scenario?
Any insight or help would be appreciated and fully rewarded.
Thanks,
Mav

Hi,
At least from the experience I had there were no performance issues. The only issue would be in terms of the time taken to transport. The larger the amount of data ,longer the transport time.
You can continue extraction of data for those 2 fields from that point on. No need to empty the data from the cube and reload again. Only thing is that the data in the past for these 2 fields may not be mapped to the existing data in the cube. If you want to do that dump the cube and reload. Otherwise the data will be mapped from the time you start extracting the new fields with the data in the cube.
Cheers,
Kedar

Adding a new field to search of Service Contracts

Hi Experts,
I have a requirement where in to add an existing field i.e your ref (sold_to) your_ref_sold field into the search criteria of Service Contrct .
How to add the field to the Search .
I have few questions here.
1 need I use EEW to add the field to Search but its already existing?
2 If not How to append the Structure crmst_query_src_btil and enhace it with field required?
3 how to implement the BADI crm_rf_search_eew?
Thanking You,
Sree.

The search help exit allows you to modify functionality of search help. If you add a new field to the
parameter list that is not contained on the selection method you can manually populate it within the search
help exit.
This would be performed within the u2018STEP DISPu2019 section. Once within this section all search help
data has been retrieved and is stored in table RECORD_TAB (record_tab-string) as one long string value.
Therefore you need to read table SHLP in-order to locate position of value within string.
Example:
To find position of personnel number (PERNR) within elemenory search
help M_PREMN you would use the following code:
Loop at record_tab.
     read table shlp-fielddescr into wa_shlp
                                   with key tabname   = 'M_PREMN'
                                            fieldname = 'PERNR'.
You could then use this information in the following way, for
example, to find a persons organisation unit:
      select orgeh endda
        up to 1 rows
        from pa0001
        into (ld_orgeh,ld_endda)
       where pernr eq record_tab-string+wa_shlp-offset(8)
                                                  u201Cpernr length is 8
       order by endda descending.
      endselect.
      select single orgtx
        from t527x
        into ld_orgtxt
       where orgeh eq ld_orgeh and
             sprsl eq sy-langu and
           ( endda ge sy-datum and
             begda le sy-datum ).
If you have added a new field to the end of the parameters list
the next step is to populate it by adding this data to the end of
the record_tab string:
concatenate record_tab-string ld_orgtxt into record_tab-string.
modify record_tab.
endloop.

I have added a new field in IT0006 ,Now when try to create a new record for

Hi Experts,
I have added a new field in IT0006 ,Now when try to create a new record for a employee.
1,If I give the SUBTY in the PA30 screen getting an error "Don't Specify a subty error"
if and remove the subty and press CREATE button popup's comes and list the subty values.......It was allowing me to enter the subty in the PA30 screen prior to my new field addition in IT0006... is't a problem with the new field addition?
2, After I choose the subty value from the pop-up I am able to see the next screen....BUT GETTING AN INFORMATION MESSAGE THAT "Assignment to feature P0006 did not take place"?
3,, In the next screen after I have passed all mandatory fields while attempting SAVE I am getting an error called " Time constraint table in T777D is incorrect" what could be the cause?

How are u adding fields to table using append in se11 or pm01.
if you are adding fields using se11 delete it and add it0005 in transaction pm01 and generate object.
add fields to structure CI_XX_R0005 and generate screen and maintain entry and screen in maintance view add entry and activate program.

Problem creating a new field

Hi,
Im trying to create a new field "identification type" in a view. This field is existing as a attribute of "BuilIdNumber" object. Im able to add this as context node. But when i include this field in view, and launch webclient, this field is disabled, Can ne one help me on this. I have used the wizard for creating a context node.
Can ne one plz tell all the steps in detail that are to be carried to create a new context node and add attributes to this context node and make these attributes available in view.
Thanks in advance,
chandan

Hi Sudipta,
Thanks for your reply. I was able to make it enabled in webclient. My mistake was that when creating a context node thru wizard, we need to select the option " Always create an instance", which i was missing out.
By the way, can you plz explain what is"lock on BuilIDNumber node". I have no idea regarding this.
Now i have added two new attributes to a view. But now webclient is responding differently. I have added two new fields in "CreatePerson" view. After save it shud go to "DetailAccount" view, but after adding two new fields it is going to "SearchAccount" view. Any inputs regarding this??
Regards,
chandan

Adding a new field and new data item breaks layout

I am adding a new field to a subform and populating it form a .Dat unfortunatly adding this field is causing data outputed to the subform below it to shift down one line on the page when outputted.
This new field is outputted at the top of the form and and the line being shifted are below this.
Below is the field details and the field as it is in the .dat file.
Field:F_PO_NUMBER [1]
Lines: 1 Characters: 20 Angle: 0
In Subform
: Main_Page
Options
: Global
^Command JFPAGE_START
^Undefine global:~^PAGE 1
^define global:SEQUENCE \pic"NUM999999",@D:NUMPAGESPRINTED../\pic"NUM99",@$PAGE../\pic"NUM99",@:JFPAGE_PAGE_OF..
^define global:JFPAGE \pic"NUM99",@$PAGE.. of \pic"NUM99",@:JFPAGE_PAGE_OF..
^GLOBAL Email COLL_TEL_NUM~12345678~^REFORMAT OFF
^GLOBAL F_CURRENCY_CODE
GBP
^FIELD F_PO_NUMBER
^COMMENT R_remit_customer
^FIELD F_REMIT_TO_CONCATENATED
Address
^COMMENT M_INVOICE_HDR_BOX1
^GLOBAL F_TRX_TYPE
Invoice
Now the weird party is if I move the new field in the .dat as below it fixes things and the everything lines up like it should do.
^Command JFPAGE_START
^Undefine global:~^PAGE 1
^define global:SEQUENCE \pic"NUM999999",@D:NUMPAGESPRINTED../\pic"NUM99",@$PAGE../\pic"NUM99",@:JFPAGE_PAGE_OF..
^define global:JFPAGE \pic"NUM99",@$PAGE.. of \pic"NUM99",@:JFPAGE_PAGE_OF..
^GLOBAL Email COLL_TEL_NUM~12345678~^REFORMAT OFF
^GLOBAL F_CURRENCY_CODE
GBP
^COMMENT R_remit_customer
^FIELD F_REMIT_TO_CONCATENATED
Address
^COMMENT M_INVOICE_HDR_BOX1
^FIELD F_PO_NUMBER
^GLOBAL F_TRX_TYPE
Invoice
^FIELD F_TRX_NUMBER
I hoping someone might have an idea of why this is the case as I'm at a loss regarding why its happening.

I may not hit on it exactly, but this sounds like Adobe's processing order.
It wants to process the fields in the order they are in the DAT file.
I have a similar problem with an overflow field, that isnt last in the DAT file,
Read this here:
http://forums.adobe.com/message/2298283#2298283
Now that may not be exactly your issue, but I think its the same inherent problem,
Adobes processing order for the fields/subforms.
I am still trying to resolve my issue, but found the ^field command in the reference manual (Print Agent),
and am wondering if I can use it.

I am new in DART extract and wanted add the new field in Existing Segement

Hi ALL
I am new in DART extract and client is request us to add the new field in Existing Segment.
What is proceedure i need to follow to add the new field in existing segment.
Moderator: Please, post in proper forum

I added an Interactions button and in the Actions on Success I open an URL or file. I have placed the video on our web server. In the URL I point to our web server "http://www.wmabhs.org/Media/Add Client 3rd Party Coverage.mp4". If I run this from any browser it works. So what do you think I have done wrong?

Error while adding a new field to the Segment in we31

Hi ,
I am getting error when i am trying to add the new field to the cust. segment.
It is released for the adding the new fields i am cancelling the release , but i got a message like this
Error while resetting release of segment 'segment name'.
it is comming from the message class EA and message number 259.
Thanks in advance.
Reagrds,
bharani

Hi,
Have you tried Cancelling the release before adding the version?
Select the active version of the IDOC Segment and cancel its release first. Only then you will be able to add a version.
Please let me know if it worked!
Vijay

Adding a new field to a Z table

We have a Z table on which we have created a datasource. We have created a virtual cube on this datasource and queries are built on this cube. This setup is present on Dev, Quality and Prod environment.
Now we have added a new field to the Z table in Dev. We will be creating a new Infoobject for this new field and will be adding it in the Virtual Infoprovider and also in the queries.
1. Do we need to replicate the datasource so that newly added field is visible to the datasource? If no, is there any way?
2. When I have to transport this to Quality and Prod, do I have to capture all the components and objects (Table,Datasoure,Virtual Cube Queries)? If no, what should I capture in the transport request?

Hi,
First, you have to regenerate the datasource in order to add the field:
1) Log on to source system (where Z table is stored) and go to transaction RSA6.
2) Select the root node and click Expand (icon with '+' sign).
3) Search for your datasource (you can use the binoculars icon).
4) Click on Change.
5) Verify that the field appears on the list. Make sure that "Hide field" and "Field only known on client exit" options are not marked for this field.
6) Click on Save.
7) Select "Datasource" -> "Generate" (CTRL+S) menu option.
8) Use RSA3 transaction in order to verify the new field appears on test extractions.
Then, to replicate the datasource in BI:
1) Log on to SAP BI and go to RSA1 transaction.
2) Go to "Modeling" -> "DataSources" section.
3) Search for your datasource and right click on it. Select "Replicate metadata" from context menu.
4) Add the new InfoObject to the VirtualProvider.
5) Update the transformation which joins the DataSource to the VirtualProvider.
As far as transport requests are concerned, even though it requires more work, it is a good practice to group objects in different transport requests according to their type:
In the source System (R3 for instance):
1) One transport request with the table.
2) One transport request with the datasource and its structure.
In BI:
1) One transport order with the datasource replica.
2) One transport order with the new InfoObject(s).
3) One transport order with the modified VirtualProvider.
4) One transport order with the modified transformations from the datasource towards the VirtualProvider.
5) One transport order with the Queries and their elements.
I hope this helps you.
Regards,
Maximiliano

Adding a new field to a standard webdynpro component's layout

Hi all,
I need to add a new field to a standard webdynpro component's( in my case the component is ''/SAPSRM/WDC_UI_SC_DOTC_BD') layout.How do i go about adding a new field to the standard component's lay out?
can anyone help me with the necessary details?
Regards,
Abhinay.

Check if this is useful to you (Login required)
https://websmp105.sap-ag.de/~sapidb/011000358700001969972008E.pdf
Rgds/Kiran

CProjects - Adding a new field to the detail screen of object link

Hi All,
I've a requirement of adding a new field to the detail screen of object link. But the field is a combination of 3 other standard fields.
Please let me know how could i realise this functionality?
Thanks in advance.

Hi Srini,
Thanks for your Reply
I have kept 01 against the field BSEG-AUGDT and selected the preselect check box also.
But still that field is not visible in the dynamic selection screen.
Thanks
Ajay.D

Problem adding a new field to existing BPS planning layout

Similar Messages

Maybe you are looking for