Problem after 30 login attempts on A390
Hi,
I installed a program to control the rotation on my lenovo a390 (ultimate rotation control), the problem is that I locked the screen on landscape, and then I was unable to insert the pattern on the lock screen. (OK stupid, I know... but that was the first problem). After 30 attempts, it should give the opportunity to login typing the password, but then it rebooted and did get hang on the "for those who do" screen. After a long time, lets say 30-40 min it entered but then it got really slow and unusable. Now it takes around 30 min to enter in the android, does not recognizes the SIM card and if you enter in one app you cannot exit from it anymore. On top of that it reboots from time to time without any warning.
There is a way to make a factory reset, or something like that??? AHHH I saw in another post about the factory mode boot (power+ vol-), but at this screen there are only tests. If I press power + vol+, I get a dead android icon with a red triangle and nothing more happens, even if I press power+ vol+ again, as I saw in another forum.
Any ideas?!?!
Best regards...
Daniel
Yes, if you enable client exclusion the WLC will block users for 60 seconds by default. You can block for them for good or block them for an extended period of time by playing with the timers.
But this will go for ALL clients that get blocked... Not just your "bad" password users.
Is this what you are looking for ?
Similar Messages
-
Locking a user after unsuccessful login attempts?!
Does anybody know how to automatically lock a user after a given number of unsuccessful login attempts?
I noticed that solaris does not offer any security feature concerning this item, although it is a good opportunity for hackers to scan a solaris machine.
Please let me know
Thanx in advanceHi,
The Trusted Solaris version supports this feature. You can find the detail about configuring the same at http://docs.sun.com under Trusted Solaris 8 and Administration Procedures.
The same can also be achieved by using Pluggable Authentication Modules(PAM) which has been incorporated since Solaris 2.6. For more info on PAM check out www.sun.com/solaris/pam. There some white papers and admin guide .Also refer to man pages on pam.conf ,pam and pam_unix.
Regards
Anshul -
Root account locked out after 3 login attempts
I've connected to a 280R (Solaris 9) machine through the console (null modem cable). After trying 3 failed login attempts, it reported that the root account has been locked out. When can I do now to re-enable it?
VincentThe usual dance. :-)
1. Put in a Solaris install CD
2. "boot -s " at the "ok" prompt.
3. mount /dev/c<your boot partition> /mnt
4. edit /mnt/etc/passwd
5. Reboot the system.
6. login as root
7. Set your password.
8. write it on a post-it.
9. place post-it on monitor.
I'm kidding with steps 8 and 9.
HTH,
Roger S.
PS - Happy T-day -
Efi Boot Problem after several failed attempt to install Windows 8
Hello, excuse me in advance for my bad English level!
I have a Macbook Pro 17" i7 2,2 Ghz (early 2011 OSX 10.9.4) equipped with a 750 Gb Samsung SSD and a Secondary 750 Gb Toshiba HHD mounted in place of the Original Laptop's DVD optical Drive.
I've tried several times to Install Windows 8.1 into the Secondary HHD Drive (USB KEY created with a Windows 8.1 Iso Image through the Bootcamp assistent) but without success. This is the message at the end of the Windows 8.1 installation process:
Windows could not prepare the computer to boot into the next phase of installation. To install Windows, restart the installation.
I don't Know why and I Don't Know what to do... The problem seems to have no solution and I'm so frustrated!!! .
But Now I've Noticed, if the EFI Boot partition is selected during the macbook's startup process, this Error Message:
I've formatted the second HDD Hark Disk now and there should be no trace of Windows in my laptop so... why this message appears?
So I've Mounted the EFI boot Partition in OSX and that's It:
So...
1) Is There some file I Can safely delete to remove this Windows's error message?
2) Is It Normal that EFI Boot Partition appears during the Macbook Startup?
THANKS IN ADVANCE FOR YOUR HELP!Hi,
Well from what I can see here you may have a hardware problem with the player. If it is not being recognised as a removable disk I would suggest if possible try it on another PC and see how it behaves. If there are no problems can you post some system details otherwise I'd either return to the dealer and they should swap it for you our contact customer support and they should be able to assist.
In answer to your question holding down the play pause button while inserting the device into the port starts it in recovery mode and you should a be able to recover from there but as the unit is behaving so badly I'd gof for my former diagnosis.
Hope this helps,
John -
There have been 7,039 failed login attempts in the last 30 minutes
Hi,
I am trying to find out the cause for an OEM alert we received:
There have been 7,039 failed login attempts in the last 30 minutesThe cause is ofcourse known, but I can't find out why the application anyway was able to do 7000+ login attempts within half an hour. The account should have locked after 10 attempts
The perticular account has a DEFAULT profile.
Auditing is on, so if we look into DBA_AUDIT_SESSION it is clearly seen that within 1 minute approx 1200 failed login attempts occured without the account being locked.
USERNAME USERHOST RETURCODE TIME COUNT
KRAMPV DDE18LNB 1017 27-01-2012 13:54 235
KRAMPV VSV2SH221 1017 27-01-2012 13:54 271
KRAMPV VSV2SH222 1017 27-01-2012 13:54 258
KRAMPV VSV2SH223 1017 27-01-2012 13:54 263
KRAMPV VSV2SH224 1017 27-01-2012 13:54 266If we retry the login with a incorrect password manually from SQLplus, after 10 login attempts the account gets locked as expected.
The above login attempts come from three application server of which I don't know how they handle failed logins.
Can anyone point me into a search direction as to why the account didn't lock. Just for completeness some extra info about the account and the DEFAULT profile:
User is created with:
CREATE USER KRAMPV
IDENTIFIED BY VALUES 'S:123456890'
DEFAULT TABLESPACE KRAMPVDATA
TEMPORARY TABLESPACE TEMP
PROFILE DEFAULT
ACCOUNT UNLOCK;
GRANT RESOURCE TO KRAMPV;
GRANT CONNECT TO KRAMPV;
ALTER USER KRAMPV DEFAULT ROLE ALL;
GRANT CREATE MATERIALIZED VIEW TO KRAMPV;
GRANT CREATE VIEW TO KRAMPV;
GRANT CREATE TABLE TO KRAMPV;
GRANT ALTER ANY MATERIALIZED VIEW TO KRAMPV;
ALTER USER KRAMPV QUOTA UNLIMITED ON KRAMPVDATA;
ALTER USER KRAMPV QUOTA UNLIMITED ON KRAMPVARCH;The DEFAULT profile has the following settings:
DEFAULT COMPOSITE_LIMIT UNLIMITED
DEFAULT PASSWORD_LOCK_TIME UNLIMITED
DEFAULT PASSWORD_VERIFY_FUNCTION NULL
DEFAULT PASSWORD_REUSE_MAX UNLIMITED
DEFAULT PASSWORD_REUSE_TIME UNLIMITED
DEFAULT PASSWORD_LIFE_TIME 180
DEFAULT FAILED_LOGIN_ATTEMPTS 10
DEFAULT PRIVATE_SGA UNLIMITED
DEFAULT CONNECT_TIME UNLIMITED
DEFAULT IDLE_TIME UNLIMITED
DEFAULT LOGICAL_READS_PER_CALL UNLIMITED
DEFAULT LOGICAL_READS_PER_SESSION UNLIMITED
DEFAULT CPU_PER_CALL UNLIMITED
DEFAULT CPU_PER_SESSION UNLIMITED
DEFAULT SESSIONS_PER_USER UNLIMITED
DEFAULT PASSWORD_GRACE_TIME 7The Oracle database version is 11.2.0.3
The OS is AIX7.1
I've been looking on MOS, but was unable to find a clue yets
Thanks
FJFranken
Edit: For the record, after I discovered the above I changed the DEFAULT profile, so the account would not unlock itself anymore. If this problem will occur in the future, maybe we can get more info as the account - if it gets locked- should stay locked now:
alter profile default limit PASSWORD_LOCK_TIME unlimited;Edited by: fjfranken on 3-feb-2012 2:56Girish Sharma wrote:
I cann't say that resource_limit is not TRUE, because you are saying "If we retry the login with a incorrect password manually from SQLplus, after 10 login attempts the account gets locked as expected.", so it means profile is working for the "KRAMPV" user.
The interesting thing is USERHOST is changing, so another option is the listener log should also have information about the failed connection attempts.
My another guess is duplicate user in the database i.e. one is KRAMPV and another is "krampv" (with quotation mark). Just check in dba_users that is there something like exists or not.....
select upper(username),count(*) from dba_users group by upper(username) having count(*) > 1;
Regards
Girish SharmaHi Girish,
resource_limit is set to FALSE.
And we've tested the locking with another user, because KRAMPV is used by the application that is running and we didn't want to risk that it got locked
USERHOST is not changing, there are 4 hosts ( application servers ) doing the same thing, so connection requests are coming from 4 hosts concurrently.
There is luckily no duplicate user.
Thanks anyway, we will keep investigating. I also sent the information to the application provider.
Bye
FJFranken -
Problem description:
Computer takes a long time to fire up. Spinning ball is seen during start up, sometimes when login dialog box, and sometimes after entering login password. My mac freeze often, especially when using Lightroom…. Help is much appreciated!
EtreCheck version: 2.0.11 (98)
Report generated 3. november 2014 kl. 01.23.41 CET
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2010) (Verified)
MacBook Pro - model: MacBookPro7,1
1 2.4 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 320M - VRAM: 256 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 2:49:19
Disk Information: ℹ️
Samsung SSD 840 EVO 500GB disk0 : (500,11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (260.35 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R UJ-898
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Configuration files: ℹ️
/etc/sysctl.conf - Exists
/etc/hosts - Count: 15
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/IPVanish.app
[not loaded] foo.tap (1.0) Support
[not loaded] foo.tun (1.0) Support
/Applications/LaCie Desktop Manager.app
[not loaded] com.LaCie.ScsiType00 (1.2.13 - SDK 10.5) Support
[not loaded] com.jmicron.driver.jmPeripheralDevice (2.0.4) Support
[not loaded] com.lacie.driver.LaCie_RemoteComms (1.0.1 - SDK 10.5) Support
[not loaded] com.oxsemi.driver.OxsemiDeviceType00 (1.28.13 - SDK 10.5) Support
/Applications/Private Eye.app
[loaded] com.radiosilenceapp.nke.PrivateEye (1 - SDK 10.7) Support
/Library/Application Support/HASP/kexts
[not loaded] com.aladdin.kext.aksfridge (1.0.2) Support
/System/Library/Extensions
[loaded] com.hzsystems.terminus.driver (4) Support
[not loaded] com.nvidia.CUDA (1.1.0) Support
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
[not loaded] com.sony.filesystem.prodisc_fs (2.3.0) Support
[not loaded] com.sony.protocol.prodisc (2.3.0) Support
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) Support
Startup Items: ℹ️
CUDA: Path: /System/Library/StartupItems/CUDA
ProTec6b: Path: /Library/StartupItems/ProTec6b
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[running] com.adobe.AdobeCreativeCloud.plist Support
[loaded] com.adobe.CS5ServiceManager.plist Support
[running] com.digitalrebellion.EditmoteListener.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.intego.backupassistant.agent.plist Support
[running] com.mcafee.menulet.plist Support
[invalid?] com.mcafee.reporter.plist Support
[loaded] com.nvidia.CUDASoftwareUpdate.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.orbicule.WitnessUserAgent.plist Support
[loaded] com.xrite.device.softwareupdate.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[invalid?] com.adobe.SwitchBoard.plist Support
[running] com.aladdin.aksusbd.plist Support
[failed] com.aladdin.hasplmd.plist Support
[running] com.edb.launchd.postgresql-8.4.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.intego.BackupAssistant.daemon.plist Support
[loaded] com.ipvanish.helper.openvpn.plist Support
[loaded] com.ipvanish.helper.pppd.plist Support
[invalid?] com.mcafee.ssm.ScanFactory.plist Support
[invalid?] com.mcafee.ssm.ScanManager.plist Support
[running] com.mcafee.virusscan.fmpd.plist Support
[loaded] com.mvnordic.mvlicensehelper.offline.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[running] com.orbicule.witnessd.plist Support
[loaded] com.radiosilenceapp.nke.PrivateEye.plist Support
[running] com.xrite.device.xrdd.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
[invalid?] com.digitalrebellion.SoftwareUpdateAutoCheck.plist Support
[loaded] com.facebook.videochat.[redacted].plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[running] com.spotify.webhelper.plist Support
User Login Items: ℹ️
Skype Program (/Applications/Skype.app)
GetBackupAgent Program (/Users/[redacted]/Library/Application Support/BeLight Software/Get Backup 2/GetBackupAgent.app)
PhoneViewHelper Program (/Users/[redacted]/Library/Application Support/PhoneView/PhoneViewHelper.app)
EarthDesk Core UNKNOWN (missing value)
Dropbox Program (/Applications/Dropbox.app)
AdobeResourceSynchronizer ProgramHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
i1ProfilerTray Program (/Applications/i1Profiler/i1ProfilerTray.app)
Internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 6.0 Support
Default Browser: Version: 600 - SDK 10.10
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
SiteAdvisor: Version: 2.0 - SDK 10.1 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
GarminGPSControl: Version: 3.0.1.0 Release - SDK 10.4 Support
JavaAppletPlugin: Version: Java 7 Update 71 Check version
User Internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 6.2 Support
F5 Inspection Host Plugin: Version: 6031.2010.0122.1 Support
f5 sam inspection host plugin: Version: 7000.2010.0602.1 Support
Safari Extensions: ℹ️
Facebook Cleaner
Better Facebook
SiteAdvisor
Incognito
Bing Highlights
YouTube5
AdBlock
YoutubeWide
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
CUDA Preferences Support
EarthDesk Support
Editmote Support
Flash Player Support
FUSE for OS X (OSXFUSE) Support
Growl Support
Java Support
Witness Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
13% taskgated
12% WindowServer
1% WitnessUserAgent
1% sysmond
1% Activity Monitor
Top Processes by Memory: ℹ️
327 MB com.apple.WebKit.WebContent
137 MB softwareupdated
94 MB Safari
82 MB VShieldScanner
82 MB Dock
Virtual Memory Information: ℹ️
65 MB Free RAM
1.58 GB Active RAM
1.54 GB Inactive RAM
647 MB Wired RAM
2.95 GB Page-ins
260 MB Page-outsYou have SCADS of extensions and the things running. McAfee, Intego, Orbicule, CleanMyMac, and others I've not ever even heard of. My first recommendation would be to remove all of these and see if things improve.
-
Login problem after testing upgrade today
Yeah problem after upgrade again After i enter my username and password to login to Gnome, i get the message
Your session only tested less than 10 seconds. If you
have not logged out yourself, this could mean that there
is some installation problem or that you may be out of
diskspace. Try logging in with one of the failsafe
sessions to see if you can fix this problem
I sure am not out of disk space so what could the problem be? I am using windows for now till i can find a solution.
Thanks.Sigi wrote:
first do a
pacman -Sy libstdc++5
and see if this solves your problem (more info here)
If this doesn't help post you /var/log/Xorg.0.log, please
Cheers Sigi
libstdc++5 has already been installed. Anyway here is the Xorg.0.log and xsession.errors files
Xorg.0.log
X Window System Version 7.0.0
Release Date: 21 December 2005
X Protocol Version 11, Revision 0, Release 7.0
Build Operating System:Linux 2.6.16-ARCH i686
Current Operating System: Linux archlinux 2.6.16-ARCH #1 SMP PREEMPT Mon May 22 21:36:23 CEST 2006 i686
Build Date: 04 May 2006
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon May 29 19:11:49 2006
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) | |-->Monitor "My Monitor"
(**) | |-->Device "** ATI Radeon (generic) [radeon]"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) FontPath set to "/usr/share/fonts/misc,/usr/share/fonts/75dpi,/usr/share/fonts/100dpi,/usr/share/fonts/TTF,/usr/share/fonts/Type1"
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.8
X.Org XInput driver : 0.5
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules/libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,2570 card 1043,80a5 rev 02 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,2571 card 0000,0000 rev 02 class 06,04,00 hdr 01
(II) PCI: 00:1d:0: chip 8086,24d2 card 1043,80a6 rev 02 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,24d4 card 1043,80a6 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,24d7 card 1043,80a6 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:3: chip 8086,24de card 1043,80a6 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,24dd card 1043,80a6 rev 02 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,244e card 0000,0000 rev c2 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,24d0 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,24db card 1043,80a6 rev 02 class 01,01,8a hdr 00
(II) PCI: 00:1f:3: chip 8086,24d3 card 1043,80a6 rev 02 class 0c,05,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,24d5 card 1043,8095 rev 02 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 1002,5961 card 1002,2002 rev 01 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,5941 card 1002,2003 rev 01 class 03,80,00 hdr 00
(II) PCI: 02:09:0: chip 14f1,2f00 card 13e0,8d85 rev 01 class 07,80,00 hdr 00
(II) PCI: 02:0e:0: chip 104c,8023 card 1043,808b rev 00 class 0c,00,10 hdr 00
(II) PCI: 02:0f:0: chip 10ec,8139 card 1043,80b3 rev 10 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000a000 - 0x0000afff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfe900000 - 0xfe9fffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd7f00000 - 0xf7efffff (0x20000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 I/O range:
[0] -1 0 0x0000b000 - 0x0000b0ff (0x100) IX[B]
[1] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]
[2] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[3] -1 0 0x0000bc00 - 0x0000bcff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
[0] -1 0 0xfea00000 - 0xfeafffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc RV280 [Radeon 9200] rev 1, Mem @ 0xe8000000/27, 0xfe9f0000/16, I/O @ 0xa800/8, BIOS @ 0xfe9c0000/17
(--) PCI: (1:0:1) ATI Technologies Inc RV280 [Radeon 9200] (Secondary) rev 1, Mem @ 0xe0000000/27, 0xfe9e0000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xf8000000 from 0xfbffffff to 0xf7ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xfeaef400 - 0xfeaef4ff (0x100) MX[B]
[1] -1 0 0xfeae8000 - 0xfeaebfff (0x4000) MX[B]
[2] -1 0 0xfeaef800 - 0xfeaeffff (0x800) MX[B]
[3] -1 0 0xfeaf0000 - 0xfeafffff (0x10000) MX[B]
[4] -1 0 0xfebff400 - 0xfebff4ff (0x100) MX[B]
[5] -1 0 0xfebff800 - 0xfebff9ff (0x200) MX[B]
[6] -1 0 0x50000000 - 0x500003ff (0x400) MX[B]
[7] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B]
[8] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[9] -1 0 0xfe9e0000 - 0xfe9effff (0x10000) MX[B](B)
[10] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[11] -1 0 0xfe9c0000 - 0xfe9dffff (0x20000) MX[B](B)
[12] -1 0 0xfe9f0000 - 0xfe9fffff (0x10000) MX[B](B)
[13] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[14] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[15] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[B]
[16] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B]
[17] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[18] -1 0 0x00000400 - 0x0000041f (0x20) IX[B]
[19] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[20] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[21] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[22] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[23] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[24] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfeaef400 - 0xfeaef4ff (0x100) MX[B]
[1] -1 0 0xfeae8000 - 0xfeaebfff (0x4000) MX[B]
[2] -1 0 0xfeaef800 - 0xfeaeffff (0x800) MX[B]
[3] -1 0 0xfeaf0000 - 0xfeafffff (0x10000) MX[B]
[4] -1 0 0xfebff400 - 0xfebff4ff (0x100) MX[B]
[5] -1 0 0xfebff800 - 0xfebff9ff (0x200) MX[B]
[6] -1 0 0x50000000 - 0x500003ff (0x400) MX[B]
[7] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B]
[8] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[9] -1 0 0xfe9e0000 - 0xfe9effff (0x10000) MX[B](B)
[10] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[11] -1 0 0xfe9c0000 - 0xfe9dffff (0x20000) MX[B](B)
[12] -1 0 0xfe9f0000 - 0xfe9fffff (0x10000) MX[B](B)
[13] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[14] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[15] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[B]
[16] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B]
[17] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[18] -1 0 0x00000400 - 0x0000041f (0x20) IX[B]
[19] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[20] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[21] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[22] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[23] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[24] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfeaef400 - 0xfeaef4ff (0x100) MX[B]
[6] -1 0 0xfeae8000 - 0xfeaebfff (0x4000) MX[B]
[7] -1 0 0xfeaef800 - 0xfeaeffff (0x800) MX[B]
[8] -1 0 0xfeaf0000 - 0xfeafffff (0x10000) MX[B]
[9] -1 0 0xfebff400 - 0xfebff4ff (0x100) MX[B]
[10] -1 0 0xfebff800 - 0xfebff9ff (0x200) MX[B]
[11] -1 0 0x50000000 - 0x500003ff (0x400) MX[B]
[12] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B]
[13] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[14] -1 0 0xfe9e0000 - 0xfe9effff (0x10000) MX[B](B)
[15] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[16] -1 0 0xfe9c0000 - 0xfe9dffff (0x20000) MX[B](B)
[17] -1 0 0xfe9f0000 - 0xfe9fffff (0x10000) MX[B](B)
[18] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[21] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[22] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[B]
[23] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B]
[24] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[25] -1 0 0x00000400 - 0x0000041f (0x20) IX[B]
[26] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[27] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[28] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[29] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[30] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[31] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts/libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Type1
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 7.0.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "bitmap"
(II) Reloading /usr/lib/xorg/modules/fonts/libbitmap.so
(II) Loading font Bitmap
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions/libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/lib/xorg/modules/linux/libdrm.so
(II) Module drm: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 6.8.99.8, module version = 8.25.18
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.4
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 0.5
(II) ATI Radeon/FireGL: The following chipsets are supported:
RADEON 9000/9000 PRO (RV250 4966), RADEON 9000 LE (RV250 4967),
MOBILITY FireGL 9000 (M9 4C64), MOBILITY RADEON 9000 (M9 4C66),
RADEON 9000 PRO (D9 4C67), RADEON 9250 (RV280 5960),
RADEON 9200 (RV280 5961), RADEON 9000 (RV280 5962),
RADEON 9200 SE (RV280 5964), FireMV 2200 PCI (RV280 5965),
MOBILITY RADEON 9200 (M9+ 5C61), MOBILITY RADEON 9200 (M9+ 5C63),
FireGL 8800 (R200 5148), RADEON 8500 (R200 514C),
RADEON 9100 (R200 514D), RADEON 8500 AIW (R200 4242),
RADEON 9600 (RV350 4150), RADEON 9600 SE (RV350 4151),
RADEON 9600 PRO (RV360 4152), RADEON 9600 (RV350 4E51),
MOBILITY RADEON 9600/9700 (M10/M11 4E50),
MOBILITY RADEON 9500 (M11 4E52), MOBILITY RADEON 9550 (M12 4E56),
RADEON 9500 (R300 4144), RADEON 9600 TX (R300 4146),
FireGL Z1 (R300 4147), RADEON 9700 PRO (R300 4E44),
RADEON 9500 PRO/9700 (R300 4E45), RADEON 9600 TX (R300 4E46),
FireGL X1 (R300 4E47), RADEON 9800 SE (R350 4148),
RADEON 9500 (R350 4149), RADEON 9550 (RV350 4153),
FireGL T2 (RV350 4154), RADEON 9600 (RV351 4155),
RADEON 9800 PRO (R350 4E48), RADEON 9800 (R350 4E49),
RADEON 9800 XT (R360 4E4A), FireGL X2-256/X2-256t (R350 4E4B),
MOBILITY FireGL T2/T2e (M10/M11 4E54), RADEON X300 (RV370 5B60),
RADEON X600 (RV380 5B62), RADEON X550 (RV370 5B63),
FireGL V3100 (RV370 5B64), FireMV 2200 (RV370 5B65),
MOBILITY RADEON X300 (M22 5460), MOBILITY RADEON X300 (M22 5461),
MOBILITY RADEON X600 (M24 5462), MOBILITY FireGL V3100 (M22 5464),
RADEON X600 (RV380 3E50), FireGL V3200 (RV380 3E54),
MOBILITY RADEON X600 (M24 3150), MOBILITY RADEON X300 (M22 3152),
MOBILITY FireGL V3200 (M24 3154), RADEON X800 (R420 4A48),
RADEON X800 PRO (R420 4A49), RADEON X800 SE (R420 4A4A),
RADEON X800 XT (R420 4A4B), RADEON X800 (R420 4A4C),
FireGL X3-256 (R420 4A4D), MOBILITY RADEON 9800 (M18 4A4E),
RADEON X800 SE (R420 4A4F),
RADEON X800 XT Platinum Edition (R420 4A50),
RADEON X800 VE (R420 4A54), RADEON X800 (R423 5548),
RADEON X800 PRO (R423 5549),
RADEON X800 XT Platinum Edition (R423 554A),
RADEON X800 GT (R423 554B), RADEON X800 XT (R423 5D57),
FireGL V7100 (R423 5550), FireGL V5100 (R423 5551),
MOBILITY RADEON X800 XT (M28 5D48), MOBILITY FireGL V5100 (M28 5D49),
MOBILITY RADEON X800 (M28 5D4A), RADEON X800 XL (R430 554D),
RADEON X800 GT (R430 554E), RADEON X800 GTO (R430 554F),
RADEON X850 XT Platinum Edition (R480 5D4D),
RADEON X800 GTO (R480 5D4F), RADEON X850 XT (R480 5D52),
RADEON X850 (R481 4B48), RADEON X850 XT (R481 4B49),
RADEON X850 SE (R481 4B4A), RADEON X850 PRO (R481 4B4B),
RADEON X850 XT Platinum Edition (R481 4B4C),
MOBILITY FireGL V5000 (M26 564A), MOBILITY FireGL V5000 (M26 564B),
FireGL V5000 (RV410 5E48), FireGL V3300 (RV410 5E49),
RADEON X700 XT (RV410 5E4A), RADEON X700 PRO (RV410 5E4B),
RADEON X700 SE (RV410 5E4C), RADEON X700 (RV410 5E4D),
RADEON X700 (RV410 5E4F), MOBILITY RADEON X700 (M26 5652),
MOBILITY RADEON X700 (M26 5653), MOBILITY RADEON X700 XL,
RADEON 9100 IGP (RS300 5834),
RADEON 9000 PRO/9100 PRO IGP (RS350 7834),
MOBILITY RADEON 9000/9100 IGP (RS300M 5835),
RADEON XPRESS 200 (RS400 5A41), RADEON XPRESS 200M (RS400 5A42),
RADEON XPRESS 200 (RS480 5954), RADEON XPRESS 200M (RS480 5955),
RADEON XPRESS 200 (RS482 5974), RADEON XPRESS 200M (RS482 5975),
RADEON XPRESS 200 (RC410 5A61), RADEON XPRESS 200M (RC410 5A62),
RADEON X1800 (R520 7100), MOBILITY RADEON X1800 (M58 7101),
MOBILITY RADEON X1800 (M58 7102), MOBILITY FireGL V7200 (M58 7103),
FireGL V7200 (R520 7104), FireGL V5300 (R520 7105),
MOBILITY FireGL V7100 (M58 7106), RADEON X1800 XT (R520 7108),
RADEON X1800 PRO (R520 7109), RADEON X1800 SE (R520 710A),
RADEON X1800 (R520 710B), RADEON X1800 (R520 710C),
FireGL V7300 (R520 710E), FireGL V7350 (R520 710F),
RADEON X1300 PRO (RV505 7143), RADEON X1300 (RV505 7147),
MOBILITY RADEON X1300 (M52 714B), MOBILITY RADEON X1300 (M52 714C),
RADEON X1300 (RV505 715F), RADEON X1300 XT (RV515 7140),
RADEON X1300 PRO (RV515 7142), MOBILITY FireGL (M54 GL 7144),
MOBILITY RADEON X1400 (M54 7145), RADEON X1300 LE (RV515 7146),
MOBILITY RADEON X1300 (M52 7149), MOBILITY RADEON X1300 (M52 714A),
RADEON X1300 SE (RV515 714E), FireGL V3300 (RV515 7152),
RADEON X1300 VE (RV515 715E), RADEON X1300 (RV516 7180),
RADEON X1300 (RV516 7183), RADEON X1300 (RV516 7187),
RADEON X1900 (R580 7240), RADEON X1900 (R580 7243),
RADEON X1900 (R580 7244), RADEON X1900 (R580 7245),
RADEON X1900 (R580 7246), RADEON X1900 (R580 7247),
RADEON X1900 (R580 7248), RADEON X1900 (R580 7249),
RADEON X1900 (R580 724A), RADEON X1900 (R580 724B),
RADEON X1900 (R580 724C), RADEON X1900 (R580 724D),
RADEON X1900 (R580 724E), RADEON X1900 (R580 724F),
RADEON X1600 XT (RV530 71C0), RADEON X1600 PRO (RV530 71C2),
MOBILITY FireGL V5200 (M56 71C4), MOBILITY RADEON X1600 (M56 71C5),
RADEON (RV530 LE 71C6), RADEON (RV530 VE 71CE),
FireGL V3400 (RV530 71D2), FireGL V5200 (RV530 71DA),
RADEON (RV530 SE 71DE)
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.25.18
(II) ATI Proprietary Linux Driver Release Identifier: LGDr8.25g1
(II) ATI Proprietary Linux Driver Build Date: May 18 2006 09:54:44
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.25.1-driver-lnx-268237
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(--) Chipset RADEON 9200 (RV280 5961) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfeaef400 - 0xfeaef4ff (0x100) MX[B]
[6] -1 0 0xfeae8000 - 0xfeaebfff (0x4000) MX[B]
[7] -1 0 0xfeaef800 - 0xfeaeffff (0x800) MX[B]
[8] -1 0 0xfeaf0000 - 0xfeafffff (0x10000) MX[B]
[9] -1 0 0xfebff400 - 0xfebff4ff (0x100) MX[B]
[10] -1 0 0xfebff800 - 0xfebff9ff (0x200) MX[B]
[11] -1 0 0x50000000 - 0x500003ff (0x400) MX[B]
[12] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B]
[13] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[14] -1 0 0xfe9e0000 - 0xfe9effff (0x10000) MX[B](B)
[15] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[16] -1 0 0xfe9c0000 - 0xfe9dffff (0x20000) MX[B](B)
[17] -1 0 0xfe9f0000 - 0xfe9fffff (0x10000) MX[B](B)
[18] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[21] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[22] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[B]
[23] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B]
[24] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[25] -1 0 0x00000400 - 0x0000041f (0x20) IX[B]
[26] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[27] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[28] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[29] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[30] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[31] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
(II) fglrx(0): pEnt->device->identifier=0x81fe980
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xfeaef400 - 0xfeaef4ff (0x100) MX[B]
[6] -1 0 0xfeae8000 - 0xfeaebfff (0x4000) MX[B]
[7] -1 0 0xfeaef800 - 0xfeaeffff (0x800) MX[B]
[8] -1 0 0xfeaf0000 - 0xfeafffff (0x10000) MX[B]
[9] -1 0 0xfebff400 - 0xfebff4ff (0x100) MX[B]
[10] -1 0 0xfebff800 - 0xfebff9ff (0x200) MX[B]
[11] -1 0 0x50000000 - 0x500003ff (0x400) MX[B]
[12] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B]
[13] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[14] -1 0 0xfe9e0000 - 0xfe9effff (0x10000) MX[B](B)
[15] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[16] -1 0 0xfe9c0000 - 0xfe9dffff (0x20000) MX[B](B)
[17] -1 0 0xfe9f0000 - 0xfe9fffff (0x10000) MX[B](B)
[18] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[19] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[20] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[21] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[22] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[23] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[24] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[25] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[B]
[26] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B]
[27] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[28] -1 0 0x00000400 - 0x0000041f (0x20) IX[B]
[29] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[30] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[31] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[32] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[33] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[34] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
[35] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[36] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.8
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "NoAccel" "no"
(**) fglrx(0): Option "NoDRI" "no"
(**) fglrx(0): Option "Capabilities" "0x00000000"
(**) fglrx(0): Option "CapabilitiesEx" "0x00000000"
(**) fglrx(0): Option "GammaCorrectionI" "0x0dc370dc"
(**) fglrx(0): Option "GammaCorrectionII" "0x06419064"
(**) fglrx(0): Option "OpenGLOverlay" "off"
(**) fglrx(0): Option "VideoOverlay" "on"
(**) fglrx(0): Option "DesktopSetup" "(null)"
(**) fglrx(0): Option "ScreenOverlap" "0"
(**) fglrx(0): Option "UseInternalAGPGART" "yes"
(**) fglrx(0): Option "Stereo" "off"
(**) fglrx(0): Option "StereoSyncEnable" "1"
(**) fglrx(0): Option "UseFastTLS" "0"
(**) fglrx(0): Option "BlockSignalsOnLock" "on"
(**) fglrx(0): Option "ForceGenericCPU" "no"
(**) fglrx(0): Option "CenterMode" "off"
(**) fglrx(0): Option "FSAAScale" "1"
(**) fglrx(0): Option "FSAAEnable" "no"
(**) fglrx(0): Option "EnablePrivateBackZ" "yes"
(**) fglrx(0): Option "FSAADisableGamma" "no"
(**) fglrx(0): Option "FSAACustomizeMSPos" "no"
(**) fglrx(0): Option "FSAAMSPosX0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY0" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY1" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY2" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY3" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY4" "0.000000"
(**) fglrx(0): Option "FSAAMSPosX5" "0.000000"
(**) fglrx(0): Option "FSAAMSPosY5" "0.000000"
(**) fglrx(0): Option "PseudoColorVisuals" "off"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(**) fglrx(0): Gamma Correction for I is 0x0dc370dc
(**) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(**) fglrx(0): Option "mtrr" "off"
(--) fglrx(0): Chipset: "RADEON 9200 (RV280 5961)" (Chipset = 0x5961)
(--) fglrx(0): (PciSubVendor = 0x1002, PciSubDevice = 0x2002)
(--) fglrx(0): board vendor info: original ATI graphics adapter
(--) fglrx(0): Linear framebuffer (phys) at 0xe8000000
(--) fglrx(0): MMIO registers at 0xfe9f0000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 0.8
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 2.0
(II) fglrx(0): VESA VBE Total Mem: 131072 kB
(II) fglrx(0): VESA VBE OEM: ATI RADEON 9200
(II) fglrx(0): VESA VBE OEM Software Rev: 1.0
(II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: V280
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Reloading /usr/lib/xorg/modules/linux/libdrm.so
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
[drm] failed to load kernel module "fglrx"
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 6.8.99.8, module version = 8.25.18
ABI class: X.Org Server Extension, version 0.2
(EE) fglrx(0): Fail to initialize ASIC in kernel.
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM
(II) fglrx(0): AGP card detected
(II) fglrx(0): board/chipset is supported by this driver (original ATI board)
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules/libddc.so
(II) Module ddc: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.8
(II) fglrx(0): Connected Display1: CRT on primary DAC
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: PAT Model: 2002 Serial#: 189
(II) fglrx(0): Year: 2004 Week: 44
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) fglrx(0): Sync: Separate
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 34 vert.: 27
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): GTF timings supported
(II) fglrx(0): redX: 0.631 redY: 0.354 greenX: 0.294 greenY: 0.596
(II) fglrx(0): blueX: 0.143 blueY: 0.087 whiteX: 0.300 whiteY: 0.340
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@67Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 75 vid: 36737
(II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 60 vid: 16481
(II) fglrx(0): #3: hsize: 1024 vsize 768 refresh: 70 vid: 19041
(II) fglrx(0): #4: hsize: 1024 vsize 768 refresh: 75 vid: 20321
(II) fglrx(0): #5: hsize: 800 vsize 600 refresh: 60 vid: 16453
(II) fglrx(0): #6: hsize: 800 vsize 600 refresh: 70 vid: 19013
(II) fglrx(0): #7: hsize: 800 vsize 600 refresh: 75 vid: 20293
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 108.0 MHz Image Size: 338 x 270 mm
(II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) fglrx(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 82 kHz, PixClock max 140 MHz
(II) fglrx(0): Serial No: 00189
(II) fglrx(0): Monitor name: LCD-MONITOR
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Specified desktop setup not supported: 8
(II) fglrx(0): Primary Controller - CRT on primary DAC
(II) fglrx(0): Internal Desktop Setting: 0x00000004
(II) fglrx(0): POWERplay version 3. 1 power state available:
(II) fglrx(0): 1. 250/164MHz @ 50Hz [enable load balancing]
(**) fglrx(0): Qbs disabled
(==) fglrx(0): FAST_SWAP disabled
(**) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(**) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 39 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
(**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024" 128.94 1280 1368 1504 1728 1024 1025 1028 1066 +hsync
(**) fglrx(0): Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024" 108.00 1280 1328 1440 1688 1024 1025 1028 1066
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024" 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync
(**) fglrx(0): *Mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808
(**) fglrx(0): Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768" 78.43 1024 1080 1192 1360 768 769 772 801 +hsync
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768" 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768" 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync
(**) fglrx(0): Default mode "1024x768": 44.9 MHz (scaled from 0.0 MHz), 35.5 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1024x768" 44.90 1024 1032 1208 1264 768 768 772 817 interlace
(**) fglrx(0): Default mode "1024x768": 100.2 MHz (scaled from 0.0 MHz), 72.8 kHz, 90.0 Hz
(II) fglrx(0): Modeline "1024x768" 100.19 1024 1088 1200 1376 768 769 772 809 +hsync
(**) fglrx(0): *Mode "800x600": 56.2 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "800x600" 56.25 800 832 896 1048 600 601 604 631
(**) fglrx(0): Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600" 49.50 800 816 896 1056 600 601 604 625
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600" 50.00 800 856 976 1040 600 637 643 666
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600" 45.50 800 840 920 1040 600 601 604 625 +hsync
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600" 40.00 800 840 968 1056 600 601 605 628
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600" 36.00 800 824 896 1024 600 601 603 625
(**) fglrx(0): Default mode "800x600": 60.1 MHz (scaled from 0.0 MHz), 56.9 kHz, 90.0 Hz
(II) fglrx(0): Modeline "800x600" 60.06 800 840 928 1056 600 601 604 632 +hsync
(**) fglrx(0): *Mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
(II) fglrx(0): Modeline "640x480" 36.00 640 696 752 832 480 481 484 509 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 656 720 840 480 481 484 500 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480" 31.50 640 664 704 832 480 489 492 520 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480" 25.18 640 656 752 800 480 490 492 525 +hsync +vsync
(**) fglrx(0): Default mode "640x480": 37.9 MHz (scaled from 0.0 MHz), 45.5 kHz, 90.0 Hz
(II) fglrx(0): Modeline "640x480" 37.89 640 672 736 832 480 481 484 506 +hsync
(**) fglrx(0): Default mode "1152x864": 119.7 MHz (scaled from 0.0 MHz), 77.1 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1152x864" 119.65 1152 1224 1352 1552 864 865 868 907 +hsync
(**) fglrx(0): Default mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864" 108.00 1152 1216 1344 1600 864 865 868 900
(**) fglrx(0): Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864" 96.77 1152 1224 1344 1536 864 865 868 900 +hsync
(**) fglrx(0): Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864" 81.62 1152 1216 1336 1520 864 865 868 895 +hsync
(**) fglrx(0): Default mode "1152x864": 64.7 MHz (scaled from 0.0 MHz), 43.0 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 64.68 1152 1208 1328 1504 864 865 868 915 interlace +hsync
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864" 58.29 1152 1200 1320 1488 864 865 868 911 interlace +hsync
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400" 28.07 640 696 736 832 400 413 415 449
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400" 24.92 640 664 760 792 400 460 462 525
(**) fglrx(0): Default mode "512x384": 19.7 MHz (scaled from 0.0 MHz), 31.1 kHz, 75.0 Hz
(II) fglrx(0): Modeline "512x384" 19.68 512 528 576 632 384 384 385 416
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 24.75 400 408 448 528 150 601 602 625 doublescan
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300" 22.33 400 416 480 496 150 601 605 742 doublescan
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 15.75 320 328 360 416 120 481 482 501 doublescan
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240" 12.59 320 328 376 400 120 491 493 525 doublescan
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 13.10 320 352 368 416 100 406 407 417 doublescan
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200" 12.59 320 336 384 400 100 457 459 524 doublescan
(--) fglrx(0): Display dimensions: (340, 270) mm
(--) fglrx(0): DPI set to (95, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules/libramdac.so
(II) Module ramdac: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 0.8
(**) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 7.0.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 0.8
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(**) fglrx(0): FSAA Gamma enabled
(**) fglrx(0): FSAA Multisample Position is fix
(**) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) fglrx(0): Depth moves disabled by default
(**) fglrx(0): Capabilities: 0x00000000
(**) fglrx(0): CapabilitiesEx: 0x00000000
(**) fglrx(0): cpuFlags: 0x8000001d
(**) fglrx(0): cpuSpeedMHz: 0x00000af0
(==) fglrx(0): OpenGL ClientDriverName: "atiogl_a_dri.so"
(**) fglrx(0): using built in AGPGART module: yes
(**) fglrx(0): UseFastTLS=0
(**) fglrx(0): BlockSignalsOnLock=1
(**) fglrx(0): EnablePrivateBackZ = YES
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xfe9f0000 - 0xfe9fffff (0x10000) MX[B]
[1] 0 0 0xe8000000 - 0xefffffff (0x8000000) MX[B]
[2] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[3] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[4] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[5] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[6] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[7] -1 0 0xfeaef400 - 0xfeaef4ff (0x100) MX[B]
[8] -1 0 0xfeae8000 - 0xfeaebfff (0x4000) MX[B]
[9] -1 0 0xfeaef800 - 0xfeaeffff (0x800) MX[B]
[10] -1 0 0xfeaf0000 - 0xfeafffff (0x10000) MX[B]
[11] -1 0 0xfebff400 - 0xfebff4ff (0x100) MX[B]
[12] -1 0 0xfebff800 - 0xfebff9ff (0x200) MX[B]
[13] -1 0 0x50000000 - 0x500003ff (0x400) MX[B]
[14] -1 0 0xfebffc00 - 0xfebfffff (0x400) MX[B]
[15] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[16] -1 0 0xfe9e0000 - 0xfe9effff (0x10000) MX[B](B)
[17] -1 0 0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
[18] -1 0 0xfe9c0000 - 0xfe9dffff (0x20000) MX[B](B)
[19] -1 0 0xfe9f0000 - 0xfe9fffff (0x10000) MX[B](B)
[20] -1 0 0xe8000000 - 0xefffffff (0x8000000) MX[B](B)
[21] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[22] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[23] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[24] 0 0 0x0000a800 - 0x0000a8ff (0x100) IX[B]
[25] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[26] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[27] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[B]
[28] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[B]
[29] -1 0 0x0000dc00 - 0x0000dc3f (0x40) IX[B]
[30] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
[31] -1 0 0x00000400 - 0x0000041f (0x20) IX[B]
[32] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[33] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[34] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
[35] -1 0 0x0000e400 - 0x0000e41f (0x20) IX[B]
[36] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[37] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[B](B)
[38] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[39] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) fglrx(0): UMM Bus area: 0xe8701000 (size=0x078ff000)
(II) fglrx(0): UMM area: 0xe8701000 (size=0x078ff000)
(II) fglrx(0): driver needs X.org 6.8.x.y with x.y >= 99.8
(II) fglrx(0): detected X.org 7.0.0.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
[drm] failed to load kernel module "fglrx"
(II) fglrx(0): [drm] drmOpen failed
(EE) fglrx(0): DRIScreenInit failed!
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xe8000000 FBMappedSize: 0x08000000
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): Direct rendering disabled
(==) fglrx(0): Using hardware cursor
(II) fglrx(0): Largest offscreen area available: 1280 x 7163
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Device: "/dev/input/mice"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/input/mice"
(==) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse1: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse1: Buttons: 11
(**) Option "CoreKeyboard"
(**) Keyboard1: Core Keyboard
(**) Option "Protocol" "standard"
(**) Keyboard1: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard1: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard1: XkbModel: "pc105"
(**) Option "XkbLayout" "gb"
(**) Keyboard1: XkbLayout: "gb"
(**) Option "CustomKeycodes" "off"
(**) Keyboard1: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard1" (type: KEYBOARD)
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
AUDIT: Mon May 29 19:12:06 2006: 3974 X: client 3 rejected from local host
AUDIT: Mon May 29 19:12:06 2006: 3974 X: client 3 rejected from local host
xsession.errors
/opt/gnome/etc/gdm/PreSession/Default: Registering your session with wtmp and utmp
/opt/gnome/etc/gdm/PreSession/Default: running: /usr/bin/sessreg -a -w /var/log/wtmp -u /var/run/utmp -x "/opt/gnome/var/gdm/:0.Xservers" -h "" -l ":0" "napoleon"
/opt/gnome/etc/gdm/Xsession: Beginning session setup...
/opt/gnome/etc/gdm/Xsession: ssh-agent not found!
/opt/gnome/etc/gdm/Xsession: Setup done, will execute: /usr/bin/dbus-launch /opt/gnome/bin/gnome-session
Failed to start message bus: Failed to read directory "/opt/kde/share/dbus-1/services": No such file or directory
EOF in dbus-launch reading address from bus daemon
thanks -
after i restoring the vault and finish the restore the aperture pop up icon said : a problem was encountered when attempting to restore from this vault. Please ensure that the has the appropriate permissions and try again.
Try this:
#Go to '''Tools '''| '''Options '''| '''Advanced '''and click the '''Network '''tab.
#In the Offline Storage menu, click the '''Clear Now''' button.
#In the location bar, type '''about:config '''and hit Enter.
#In the filter at the top, type: '''keyword.URL'''
#Double click it and remove whatever's in there. You'll see it revert to "Default" and "String".
#Go to File | Exit
#Restart Firefox and go to the page you want to set as your homepage
#Go to '''Tools '''| '''Options '''| '''General'''.
#Make sure it says "''Show My Homepage''" in the first dropdown menu.
#Click the button called "'''Use Current Pages'''" to set the homepage to the one you have on the screen. -
Login problem after upgrade to mavericks
Hi, i have login problem after upgrade from mountain lion to movericks in imac, I did enter the correct password But back to the login page again.
Hi cpuman8,
Thanks for visiting Apple Support Communities.
If you're not able to log in to your user account after upgrading, try resetting your password using the method in this article:
Resetting the original administrator account password
In OS X Lion or later, you can reset your user password with your Apple ID.
OS X: Changing or resetting an account password
http://support.apple.com/kb/ht1274
Best Regards,
Jeremy -
After typing login password at login screen osx lion attempts to login then returns to login screen
after typing login password at login screen osx lion attempts to login then returns to login screen, any ideas?
While we all have MacBooks in this forum most of us don’t run Lion. There's a Lion Support Community where everybody has Lion. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/mac_os/mac_os_x_v10.7_lion
-
Data lost after 10 failed login attempts...Can the data be restored?
Hello...
Has anybody a solution to recover the data after 10 failed login attempts?
My son played with my Iphone...and the data is gone...
ThanksYes, I have already followed this article.
After changes in AD account, we need to follow this article.
But, here my concern is that after password change prompts, it keeps retrying again and again for new password. It will cross the threshold limit which is set as 10. But the account doesn't gets locked.
Thanks for the suggestion.
Regards -
User locks out, due to 5 invalid login attempts after the server running
Hi ,
I HAC on WLS 10.3.2 (Oracle Solaris on x86-64 (64-bit)).
user locks out, due to 5 invalid login attempts just after the server comes into running state.
But the strange thing is Customer is not trying to login into it.
we unlocked the user, after logging into the console with a different user.
Customer knows the username and password
Still the issue appears after few minutes.
Below are the logs:
####<Oct 5, 2010 2:41:36 PM SGT> <Notice> <WebLogicServer> <STG-DS11> <AdminServer> <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <21524a931a3e4d99:45f2a2df:12b7b1fb09c:-8000-0000000000000005> <1286260896734> <BEA-000329> <Started WebLogic Admin Server "AdminServer" for domain "IDMDomain" running in Production Mode>
####<Oct 5, 2010 2:41:36 PM SGT> <Notice> <WebLogicServer> <STG-DS11> <AdminServer> <main> <<WLS Kernel>> <> <21524a931a3e4d99:45f2a2df:12b7b1fb09c:-8000-0000000000000003> <1286260896843> <BEA-000365> <Server state changed to RUNNING>
####<Oct 5, 2010 2:41:36 PM SGT> <Notice> <WebLogicServer> <STG-DS11> <AdminServer> <main> <<WLS Kernel>> <> <21524a931a3e4d99:45f2a2df:12b7b1fb09c:-8000-0000000000000003> <1286260896846> <BEA-000360> <Server started in RUNNING mode>
####<Oct 5, 2010 2:41:36 PM SGT> <Info> <J2EE> <STG-DS11> <AdminServer> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <21524a931a3e4d99:45f2a2df:12b7b1fb09c:-8000-0000000000000006> <1286260896848> <BEA-160151> <Registered library Extension-Name: bea_wls_async_response (JAR).>
####<Oct 5, 2010 2:41:37 PM SGT> <Info> <EJB> <STG-DS11> <AdminServer> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <21524a931a3e4d99:45f2a2df:12b7b1fb09c:-8000-0000000000000006> <1286260897879> <BEA-010008> <EJB Deploying file: mejb.jar>
####<Oct 5, 2010 2:41:39 PM SGT> <Info> <EJB> <STG-DS11> <AdminServer> <[STANDBY] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <21524a931a3e4d99:45f2a2df:12b7b1fb09c:-8000-0000000000000006> <1286260899932> <BEA-010009> <EJB Deployed EJB with JNDI name ejb.mgmt.MEJB.>
####<Oct 5, 2010 2:42:35 PM SGT> <Info> <Health> <STG-DS11> <AdminServer> <weblogic.GCMonitor> <<anonymous>> <> <21524a931a3e4d99:45f2a2df:12b7b1fb09c:-8000-000000000000000c> <1286260955961> <BEA-310002> <50% of the total memory in the server is free>
####<Oct 5, 2010 2:43:35 PM SGT> <Info> <Health> <STG-DS11> <AdminServer> <weblogic.GCMonitor> <<anonymous>> <> <21524a931a3e4d99:45f2a2df:12b7b1fb09c:-8000-000000000000000c> <1286261015987> <BEA-310002> <71% of the total memory in the server is free>
####<Oct 5, 2010 2:46:09 PM SGT> <Notice> <Security> <STG-DS11> <AdminServer> <ExecuteThread: '3' for queue: 'weblogic.socket.Muxer'> <<WLS Kernel>> <> <21524a931a3e4d99:45f2a2df:12b7b1fb09c:-8000-000000000000001b> <1286261169575> <BEA-090078> <User weblogic in security realm myrealm has had 5 invalid login attempts, locking account for 30 minutes.>
####<Oct 5, 2010 2:46:24 PM SGT> <Info> <Server> <STG-DS11> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <21524a931a3e4d99:45f2a2df:12b7b1fb09c:-8000-000000000000001d> <1286261184189> <BEA-002635> <The server "wls_ods1" connected to this server.>
Thanks,
DanielUser weblogic in security realm myrealm has had 5 invalid login attempts, locking account for 30 minutes.The customer knows the weblogic password?
-
What do I do after "too many login attempts" and I have tried reset of password?
I am required to have and login to an adobe account to read Overdrive eBooks via my local public library for my iPhone Overdrive app. I have downloaded Overdrive's app update and therefore need to re-login to Adobe to read ebooks again on my iPhone. When I try to login to adobe via my iPhone to do this, I got an error message something like "too many login attempts." I have tried reset of my password and I still get this message and still cannot login. Please help!!!! I am desparate!!!!
Eliza. I have the same problem, I have replaced the batteries in my wireless keyboard but it is not working therefore I can't log in as I can't type my password. (Doing this on my iPad). How did you solve yours please. Regards mfa
-
I have installed solaris 8 completly. But after CDE login,
I have seem black screen and only help and File manager windows there. My Video card is ET6000 with 2.25M Ram and resolution setting is 1024*768 256 color. Monitor is 15 inch with 48MHz MultiFrequency setting. Could any body help me? Tks a lot!First try setting your video card as a Standard VGA with 800x600 resolution. Check to see if you are able to see everything on the desktop.
If you can, you need to find a driver that is better suited for your video card.
Thanks & Revert back,
Allen
Sun Developer Support -
THE ISSUES ARE:
1. FORGOT PASSWORD
2. FORGOT PASSWORD RECOVERY INFO
3. EXCEEDED ATTEMPTS TO LOGIN
I HAVE READ OTHER PEOPLES FORUM PROBLEMS THAT ARE THE SAME. WHEN I FOLLOWED LINKS THAT SUPPORT GAVE THERE IS NO SOLUTION TO ACTUALLY FIX THE PROBLEM.
What I need is simply this: Blackberry to send me a RESET PASSWORD link to the email I have registered with Blackberry WITHOUT HAVING TO PROVIDE PASSWORD RECOVERY INFO. This will enable me to bypass unknown recovery password info and access my Blackberry ID account.
Why haven't I been able to find a solution to fix the problem?
BECAUSE IT DOESN'T APPEAR TO EXIST........ ANYWHERE..... EVEN ON YOUTUBE BLACKBERRY ARE RUNNING AN OUT OF DATE SOLUTION CENTRE.
When looked online to Blackberry youtube video it shows a solution that doesn't exist! WHY? BECAUSE IT WAS UPLOADED IN 2011. DUH. http://www.youtube.com/watch?v=lvdRb4qNG1M
If I can't remember my password or recovery password info there is NO other option available that will send me a reset password via email so I can keep my current BB ID.
KB34776 - does not apply because you HAVE TO BE ABLE TO REMEMBER YOUR RECOVERY PASSWORD!
CHECKED THIS OUT...
Workaround
If the BlackBerry ID password has been forgotten but the answer to the password recovery question is known, select Forgot Password on the smartphone and answer the recovery question to generate a password reset email. Follow KB28685 to complete this process.
If the BlackBerry smartphone user knows the email address used for the BlackBerry ID login but is unable to remember the associated password then it is possible to reset the password using the steps below:
Note: If the BlackBerry ID account is not confirmed, it is necessary to provide the answer to the password recovery question as part of the web based password reset flow.
To see if a BlackBerry ID account is confirmed, log in to the BlackBerry ID account, select Account Details and locate the Email Status field. For instructions on confirming the BlackBerry ID account follow KB34137.
Browse to the following URL using a desktop browser, the BlackBerry Browser on the BlackBerry smartphone, or the Browser on the BlackBerry PlayBook: http://blackberryid.blackberry.com/bbid/recoverpassword
Enter the BlackBerry ID Username (email address) and the CAPTCHA characters, then clickSubmit.
Enter the Answer to the Password Recovery Question, then click OK.
Note: Answering the recovery question is only required if the BlackBerry ID account is not confirmed.
A confirmation message will be displayed A password reset email has been sent to [email protected], at which point, a reset email will be delivered to the associated email address inbox.
Log in to the email account associated to the BlackBerry ID using the desktop browser, BlackBerry Browser on the smartphone, or the Browser on the BlackBerry PlayBook.
Locate the password reset email and select the Change your BlackBerry ID password link.
Note: The BlackBerry ID reset email will come from [email protected]. If the email is not found in the inbox, check the mailbox's Spam or Junk folder.
When the password reset page loads, enter the Answer to the Password Recovery Question, enter the New Password, Confirm Password, then click Submit.
A confirmation message will display once the changes have been saved successfully.
Moving forward use the newly created password whenever logging into BlackBerry ID.
If the BlackBerry smartphone user does not know the email or password that was used for the BlackBerry ID, the BlackBerry ID will be locked out after 10 unsuccessful login attempts. See KB24157 for BlackBerry ID lockout behavior.
THEN CHECKED KB24157......
Overview
BlackBerry ID is the master key to BlackBerry smartphone products, sites, services and applications, including BlackBerry Protect and the BlackBerry App World storefront.
To prevent unauthorized access to the account, the BlackBerry ID will become locked out after a number of failed attempts. See the information below for an outline on the expected behavior:
Local Authentication Lockout
On BlackBerry PlayBook and BlackBerry smartphones if the user enters their BBID password incorrectly 10 times on the BBID sign in screen, verify password screen, or BBID Edit screens, they are LOCKED OUT of all the following functions on that BlackBerry device for 15 minutes:
Authenticating with their BlackBerry ID on the sign in screen
Authenticating with their BlackBerry ID on the verify password screen
Authenticating with their BlackBerry ID on the BBID edit screens
Note: The user can still log in on the web or any other devices associated with their BlackBerry ID. They are only locked out on the device where the 10 incorrect attempts occurred. On the locked out device, after 15 minutes, they get 1 try to provide the correct password on the sign in and/or verify password screens. If they fail to enter the correct password, they are locked out for an additional 15 minutes on that device.
Account Server Lockout
Users have total of 10 attempts to enter their password correctly against the BlackBerry ID Account Server.
The scenarios that increment the Account Server lockout counter are as follows:
Providing an incorrect password anywhere on the BlackBerry ID web portal (blackberry.com/blackberryid)
Providing an incorrect password within the BlackBerry ID Edit feature on any BlackBerry device or BlackBerry PlayBook
Note: if a user provides an incorrect password 5 times on the BlackBerry ID web portal (blackberry.com/blackberryid), and then 5 more times on the BlackBerry ID Edit feature on their BlackBerry PlayBook, the cumulative number of failed attempts is 10. Once the user has made 10 incorrect attempts to provide their password against the Account Server, they are locked out of the Account Server PERMANENTLY until they reset their password.
See KB26361 for information to reset a BlackBerry ID password
Note: The Account Server Lockout does NOT prevent the user from local authenticating on devices (the user can still authenticate on the sign in and verify password screens on their BlackBerry devices).
Forgot Password Lockout
If the user answers their Security Question incorrectly 10 times, they are locked out for 15 minutes of Forgot Password functionality on all interfaces such as:
BlackBerry website (blackberry.com/blackberryid)
BlackBerry PlayBook
BlackBerry smartphone
Note: After 15 minutes, they get 1 try, and if they fail to answer the question correctly, they are locked out for an additional 15 minutes.
THAT DIDN'T WORK SO NOW ITS BACK TO..... KB26361
Overview
To change the BlackBerry ID password, complete the steps below for the specific device:
From the BlackBerry 10 smartphone:
Swipe down from the top bezel on the home screen and select Settings.
Scroll down and select BlackBerry ID.
Select Change Password.
Enter the current password in the Current BlackBerry ID Password field.
Enter the new password in the New BlackBerry ID Password and Confirm New Passwordfields.
Select Submit to complete the password change.
To confirm the change You have changed your password will be displayed.
Also, if the BlackBerry ID password has been forgotten, select Forgot Password on the smartphone and answer the recovery question to generate a password reset email. Follow KB28685 to complete this process.
Note: When using the recovery question password reset method, the generated email will be delivered to the BlackBerry 10 smartphone if the BlackBerry ID email address has been setup via Settings >Accounts
From a computer:
Visit http://www.bbid.com/ from a PC or BlackBerry smartphone browser.
Click Log in.
Enter the BlackBerry ID Username (email address) and password, then click Sign In.
Click Account Details.
Next to Password, click Edit.
Enter in the current password, followed by the new password. Enter the new password again in the confirm password field, then click Save.
Click Done to exit from the BlackBerry ID account information screens.
From the BlackBerry smartphone running BlackBerry 6:
Navigate to Options > Third Party Applications > BlackBerry ID.
Click on Change next to BlackBerry ID Password.
Enter in the current password, followed by the new password. Enter the new password again in the confirm password field, then click OK.
A confirmation message will display Your password has been successfully changed.
Click OK.
From the BlackBerry smartphone running BlackBerry 7:
Navigate to Options > Device > BlackBerry ID.
Click on Change next to BlackBerry ID Password.
Enter in the current password, followed by the new password. Enter the new password again in the confirm password field, then click OK .
A confirmation message will display Your password has been successfully changed.
Click OK.
From the BlackBerry Playbook tablet:
Navigate to the Options icon.
Select BlackBerry ID.
Click on the Edit button next to Change Password.
Enter in the current password, followed by the new password. Enter the new password again in the confirm password field, then click Submit.
A confirmation message will display You have changed your password.
Click OK.
If the password for a BlackBerry ID account has been forgotten and the login is unsuccessful, use the following process to reset the password.
Note: If the BlackBerry ID account is not confirmed, it is necessary to provide the answer to the password recovery question as part of the web based password reset flow. To see if a BlackBerry ID account is confirmed, login to the BlackBerry ID account, select Account Details and locate the Email Status field. For instructions on confirming the BlackBerry ID account follow KB34137.
To generate a password reset email, complete the following:
Browse to the following URL using a desktop browser, the Browser on the BlackBerry smartphone or the Browser on the BlackBerry PlayBook: http://blackberryid.blackberry.com/bbid/recoverpassword
Enter the BlackBerry ID Username (email address) and the CAPTCHA characters, then clickSubmit.
Enter the Answer to the Password Recovery Question, then click OK. (Answering the recovery question is only required if the BlackBerry ID account is not confirmed)
A confirmation message will be displayed A password reset email has been sent to [email protected] , at which point, a reset email will be delivered to the associated email address inbox.
Login to the email account associated to the BlackBerry ID using the desktop browser, BlackBerry Browser on the BlackBerry smartphone or the browser on the BlackBerry PlayBook.
Locate the password reset email and select the Change your BlackBerry ID password link.
Note: The BlackBerry ID reset email will come from [email protected] If the email is not found in the inbox, check the Spam or Junk folder.
When the password reset page loads, enter the Answer to the Password Recovery Question, enter the New Password, Confirm Password, then click Submit.
Note: Answering the recovery question is only required if the BlackBerry ID account is not confirmed.
A confirmation message will display once the changes have been saved successfully.
Moving forward use the newly created password whenever logging into BlackBerry ID.
Note: If the BlackBerry ID email address is a BlackBerry mail address (e.g. <username>@tmo.blackberry.net), the BlackBerry ID password reset email will not be received on the BlackBerry smartphone. Since the BlackBerry mail address is not accessible from a computer, the steps outlined in KB28111 will need to be performed.
IT ALL LEADS BACK TO THE SAME UNHELPFUL NON-SOLUTION OF USE THE PASSWORD RECOVERY QUESTION....
Can the tech department of Blackberry please sort out this ridiculous unhelpful system by sending customers a direct email if password is forgotten so they can reset without having to go through the above without finding a solution.
THANK YOU.Hi and Welcome to the Community!
Please see this "sticky" post, along with the threads to which it links, for helpful information to guide you as you proceed:
http://supportforums.blackberry.com/t5/Social-Lounge/How-This-Site-and-Formal-Support-Work/td-p/2540...
Hopefully, this information will be of use to you.
That said, it sounds like you have exhausted all of the automatic recovery methods...but just in case, please see this "sticky" post for helpful information concerning your BBID situation:
http://supportforums.blackberry.com/t5/BlackBerry-World/How-to-regain-access-to-your-BBID/td-p/25467...
Hopefully, this information will be of use to you.
But do please keep in mind that security is a 2-way street...the human element play an equal part in that security, and you have failed at that in this situation, yet desire for the automated methods to still recover for you. Such just isn't possible, because your failure has exceeded the capabilities of the automated methods.
Hence, you likely need human intervention from an actual BB representative, which is not available in this forum (as discussed in the first link I gave you above). But, the methods to attempt to seek human intervention are posted within the 2nd link I gave you.
Cheers, and Good Luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Maybe you are looking for
-
Dear Sirs, Can any one tell me is it possible to give authorisation segment wise? How? thanks in advance.
-
How can I modify Time dimension to create a Top member above year members ?
Hi experts, I would like to modify Time dimension to add a Top member above year members. I already did a test: I added a member in Time dimension which is the parent of all year members. I granted it these property values: - ID = TOTAL - EVDESCRIPTI
-
Hi guys anyone who has Asset management docs,simplyfied process doc's not the oracle user/impl guides,please share thank you in advance
-
Regarding allignment in classical report, need it urgently
Iam strucking in dispalying the data in classical report. Iam working with hr module. My output should be in such a way that all the countries which iam taking in one internal table shuld be displayed in row. with regarding these countries I was fetc
-
[Solved] Ping local network timeout 2 times every 20 reply
I just install Windows 8.1 Pro and my internet very slow then I try ping my router and get this result: Reply from 192.168.1.1: bytes=32 time<1ms TTL=128 Reply from 192.168.1.1: bytes=32 time<1ms TTL=128 Reply from 192.168.1.1: bytes=32 time<1ms TTL=