Problem after applying EP 8

Hi ,
I am unable to open old models after applying Enhancement package 8.
Can any one suggest what need to be done.
Thanks
Sudhakar.

Hi,
do you receive any error message? How does "can not open any models" look like?
By the way - there is no EHP 8 at Java side so I guess it must be the backend?
Anja

Similar Messages

Problems after applying latest Airport update.

I have a core duo macbook and was able to maintain a connection to my wpa secured wireless network before running software update a few days ago. After doing so, I can't maintain a connection. It simply stops working.
I disconnect, reconnect, and os x says there was a problem connecting to my network. I turn airport off then back on and still get the same error.
I am still able to sign onto other networks. My ibook and powerbook have no trouble connecting and maintaining a connection to my wpa secured network when my mac book is having trouble. I have not applied any software updates to those recently.
After rebooting the macbook, I can connect just fine. This happens once every 3 hours or so and is driving me nuts. Anyone know how to rollback the update or know what might be wrong?
Thanks,
Todd
MacBook 2.0ghz Core Duo (Black) Mac OS X (10.4.8)

hello,
i have the same problem after the update. i see some members on the forums suggesting to turn off the wifi security helps, but who wants to give free wifi to there neighbors. with my situation, my router has a settings for "WPA-AES" or "WPA-TKIP." i had my router set for "WPA-AES" before the update, things works fine, after the update i tried to delete the key chain entries of my wifi connection and the preferred network list, which didn't help, but changing my router to be "WPA-TKIP" helped. my connection works normally again, i can reboot, put the macbook to sleep and it reconnects fine.
hope this might work for you if you have this "TKIP" setting for you wifi router. i have a buffalo WZR-RS-G54 router, btw.
good luck.
dang
macbook 2.0ghz, 2g ram, 80g hd Mac OS X (10.4.8)

Problems after applying patch 5 of CM & Collaboration on EP 6.0 SP2

hi everyone.
here is the problem
we recently applied patch 5 for CM on EP 6.0 SP2
the portal platform is at patch 27.
after having applied the patch the logs indicated that the upgrade sequence completed successfully.
however after we restarted the portal and logged back in none of the KM repositories are accessible. it just says not found / is not accessible or is not available.
under system admin when we go into Content Management Configuration it says invalid Repository Managers.
i have reset the SAPWCM user password and check the connection pool settings but still nuthin.
i have checked the cm.properties and config_local.properties files. however i have no document to compare what the correct format of the entries in these files is. i know they are supposed to have identical entries.
can somebody help?
thanks

Hi,
I had the same problems after patching CM. I had to re-enter the WCM password of the 3 CM Conenction Pools in the CM Configuration under "jdbc connection pools".
Hope this helps
Cheers,
Jochen

Problem after applying SPS 10

We have applied SPS10 to Portal 7.0 system (source level was SPS9).
There was no problems during the deployment.
Now when I start the portal, log into it straight away I get an error:
<i>Portal Runtime Error
An exception occurred while processing a request for :
iView :
pcd:portal_content/every_user/general/defaultDesktop/frameworkPages/frameworkpage/com.sap.portal.innerpage/com.sap.portal.layoutPortal1_WAandNavPanel
Component Name : com.sap.portal.layouts.framework.WAandNavPanel
Error occurs during the rendering of jsp component.
Exception id: 10:50_23/01/07_0019_15392350
See the details for the exception ID in the log file</i>
Please advice.

Hi Robert
When you get this error after loggin into the portal or the opening of portal URL.
Send me /usr/sap/<SID/<JC<>/work/dev_jcontrol logs

LOGIN PROBLEM AFTER APPLYING SAP_ BASIS PATCHES

Hi Experts,
I applying sap_basis support pack from level 16 to 20. when applying first patch it create more dumps and give the below syntax error. After that it cannot allowed to login to the GUI and create a dump. No any transcations codes are allowed. so please guide me to solve the problem.
The syntax error message:
Short text
    Syntax error in program "SAPLSDOC ".
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPMSYST" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "SAPLSDOC " in include
     "CL_GUI_ALV_GRID===============CU " in
    line 127:
    "Type "IF_ALV_PRINT_PARAMETER_PROXY" is unknown"
    The include has been created and last changed by:
    Created by: "SAP "
    Last changed by: "SAP "
    Error in the ABAP Application Program
    The current ABAP program "SAPMSYST" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    The following syntax error was found in the program SAPLSDOC :
    "Type "IF_ALV_PRINT_PARAMETER_PROXY" is unknown"
Regards
S.Balaji

First check your<DIR_TRANS>/tmp directory What files are there ??
Then check <DIR_TRANS>/log directory
There will be a log there for sure
Pravin

Problem after Applying SP19 patch 30

We have recently applied SP19 Patch 30 to BI JAVA in development system. After this upgrade when we run a query and use teh F4 Help on any of the selections, the screen shows '???' instead of the text of all the values.
Doe any one know the issue and the solution for this.
Thanks
Amit

Install patches for BEx addon 7.0 which is available in service market place and also install DotnetFx exe in your PC.
Hope this would resolve your issue.

System problems after applying patches

Hi all,
I was patching our netweaver 2004s system and now I am not able to use any transaction anymore.
First I updated the Abapkernel and the SPAM itself. Then I started applying the Abap support packages. I had no problem applying patch level 7 and 8. When I imported patchlevel 9, the system did not respond anymore. Every time I tried to execute a transaction I got a shortdump.
Do you have any idea what could be the problem?
We restored the system and now I got a similar error already when updating SPAM.
Thanks & Regards
Cornelius

Hi,
Just try to run RSXMB_ACTIVATE_ICF_SERVICES program from SE38 and see whether it works or not.
---Satish

Problem after applying support pack 15

Hi ,
I applied Support Pack 15 for SOLMAN 4.00. Every thing went fine , but after that i entered into maintenance optimizer and tried to download a package, then its giving error saying "No Customer numbers in transaction AISUSER". When i click that it gave a popup saying as below:
Message Number: SOLMAN_SAP_BACKEND016
Diagnosis
There are no entries with a customer number in the 'Customer Number' field in the table AISUSER.
System Response
You cannot get customer number-specific RFC destinations.
Procedure
Maintain these entries manually or start the report
SMBI_AISUSER_VAR_MIG to copy any existing customer number from the table AISDK_CF_OSS_USR.Please guide me
Thnaks

Yes i did the same and when i went to maintenance optimizer it says:
Message Number: SOLMAN_SAP_BACKEND016
Diagnosis
There are no entries with a customer number in the 'Customer Number' field in the table AISUSER.
System Response
You cannot get customer number-specific RFC destinations.
Procedure
Maintain these entries manually or start the report
SMBI_AISUSER_VAR_MIG to copy any existing customer number from the table AISDK_CF_OSS_USR.
Actually for this message i got a note 1140822 in the forums and when im following this note i got the error mentioned earlier (below):
The RFC-user does not belong to a VAR- or CCC-customer number
Message no. AI_SC_EN111
Diagnosis
The user used in RFC destination SAP-OSS does belong to a simple customer number that is not assigned to a Value Added Reseller or Customer Competence Center in SAP Support Portal.
Procedure
You need to maintain your customer numbers manually in table V_AISAPCUSTNOS or choose another user.
Reply
I couldnt get much information for this error though i gave 6 digit in theV_AISAPCUSTNOS and 10 digit in the AISUSER.
Forward

Freezed problem after applying Clicks and Pops filter

It always halt after I have submitted Clicks and Pops filter.

Dropping by just to thank you again for your feedback and to let you know that the problem no longer exists. I do still work with Logic Pro 9 at 32 bits (I'll move on to 64 as soon as I finish all the ongoing work started under 32 bits) and I did maintained the buffer size on 256.
I noticed that MOTU had launched a new driver version so I installed it just to realize that the loud poffs and cracks evolved to tiny crackle noise, like static on radio waves, that happened every 2 or 3 minutes, the noise starting slowly (few cracks) then accelerating (many cracks), lasting 5 seconds each time. Then silence (music) again. Major upset.
Then I was notified (as we all were I guess) that a Mavericks update was available. Run the update, a long one I should say, and, problem solved, no more noises - just plain music.
So everything's cool again. Finishing up some more instrumentals without unwanted noises.Thank you all, thx Nigel.
Francis Mann

Problems after applying patches - please help

Hi All,
i've just applied some patches last week to one of my CF servers (CF 8.01 on SBS 2003). I followed the instructions and didnt really have any issues i noticed until yesterday. The debugging output on screen is gone, replaced by a 500 error and a ton of error codes like this:
[code
]ROOT CAUSE:
java.lang.NoSuchMethodError: coldfusion.server.DataSourceService.executeQuery(Ljava/sql/Connection;Ljava/lang/String;L java/lang/String;Lcoldfusion/sql/ParameterList;Ljava/lang/Integer;Ljava/lang/Integer;Ljava /lang/Integer;[IIIZZ)Lcoldfusion/sql/Table;
          at coldfusion.sql.SqlImpl.execute(SqlImpl.java:329)
          at coldfusion.tagext.sql.QueryTag.executeQuery(QueryTag.java:838)
          at coldfusion.tagext.sql.QueryTag.doEndTag(QueryTag.java:528)
[/code]
i also cannot view the logfiles in CF administrator. Similar error code as above - full page.
Patches i applied were:
APSB12-06
APSB11-29
APSB12-15
not necessarily in that order (i followed the order specified on adobe's site).
any help or guidance is greatly appreciated-i can provide any info that may help. t
thank you very much

Hi
First of all you might have taken backup of files before applying patches. If yes then please replace them first to stabilize it. Once that is done then apply patches one by one and test it before applying other one. That should help and identify the issue if there is any.
Regards
Swaraj

Performance problems after EHP4

Hello,
We have a small problem.
After installing EHP4 for ERP and EHP1 for Netweaver 7 on AIX Oracle installation, an increase in dialog response time is reported.
We upgraded last September 2009, and from then and to now, we have gone from an average of 800ms to 1200ms in dialog response time.
When we analyze transactions, there is no specific transaction that is the cause, it looks more like an allover trend, that the system in general has become slower.
When we look at fx. Earlywatch reports, it is quit obvious, that the u201Cproblemsu201D started just after implementing the EHP.
We are attacking this on several fronts, and I am looking on the sap basis part.
I was not a part of the upgrade team, so what I am looking into, is weather maybe some notes has been forgotten or something else. I am especially interested in notes and steps that should have been performed on Oracle, in connection with the EHP upgrade.
Is there anybody in here that have experienced similar problems, after applying EHPs?
Best Regards,
Kenneth
Edited by: Kenneth Nielsen on Jan 22, 2010 9:45 AM

Hi Kenneth,
In which area that you are having much interval in total rsponse time? If it is looking under DB time may be cause with Oracle bug fixes..check your all Oracle patches(mainly related to performance).
And explore the DB version and patch list that presently you had.
Regards,
Nick Loy

Link problem after 3.0.9.8.4 patch

Hello,
there is another problem, after applying 3.0.9.8.4 patch on my portal. Link in reports doesn't work properly - before it works well, but now with the new version the link doesn't send parameters (it can be seen in URL) - but it should. I set link and the report properly, as i set many times before.
Is it another bug after patch 3.0.9.8.4 on MS WIN, or did I something wrong? Has anyone an idea how to avoid problems ? Will there be patches in few days ? If not, so what can I do, reinstall patch, what was correctly apllied, or reinstal whole portal ?
Any help would be appreciated.
Ales Hrncarek ([email protected])

THE PROBLEM IS NOT SOLVED.
I used report.
1) SQL query
select * from table@dblink
2) give to one of the table's columns a link, then click to assign parameters - it is ALL OK.
------BUT----------
1) SQL query
select [only a few columns from table] from table@dblink
2) give to one of the table's columns a link, then click to assign parameters. When I populate the window to assign values to parameters from link, there are filled LOVs and when i set them, they reset again after I click APPLY buton - AND ---> that is more important THE LINK DOESN'T SEND PARAMETERS AT ALL. (can be seen in page source -html)
it all worked before 30984. I'm angry because this week my work stopped and I have to solve this kind of problems, which haven't end.
Can somebody asure me, that there will be patch soon - in few days, or I should reinstall whole portal ? Or is a workaround here ?
Please help. Thanks. Ales Hrncarek

Problem with Apache reverse proxy after applying SP13 NW

Hello,
we have a NW04 EP Portal and a Apache reverse proxy in the DMZ. After applying SP 13 for the portal we get the following error from the reverse proxy:
Proxy Error
The proxy server received an invalid response from an upstream server.
The proxy server could not handle the request GET /irj/.
Reason: Error reading from remote server
Apache/2.0.52 (Win32) mod_ssl/2.0.52 OpenSSL/0.9.7e Server at servername.company.de Port 443
Is is it possible, that there is a problem with sp13?
Best regards
Daniel Holstein

Hi Daniel,
ok I`ll try to find a solution in parallel and keep you up to date.
In the following my settings in case I missed something:
<VirtualHost test.firma.de:443>
SSLEngine on
SSLProxyEngine on
SSLCertificateFile /apache/keys/pac_ssl_qep_dmz_server.crt
SSLCertificateKeyFile /apache/keys/pac_ssl_qep_dmz_server.key
ServerName test.firma.de:443
ServerAdmin [email protected]
LogLevel debug
ErrorLog logs/ssl_443_error
CustomLog logs/ssl_443_access_log common
ProxyVia Off
ProxyPreserveHost On
ReWriteEngine on
ReWriteLogLevel 0
ReWriteLog logs//ssl_443_rewrite_http.log
ProxyPass / https://backend.firma.de:50001/
ProxyPassReverse / https://backend.firma.de:50001/
</VirtualHost>
Regards, Jens

Problem with Adobe Reader 8.1.2 after applying NW04s SPS15

Hi Experts,
After installing NW04s SPS15 (from SPS14) we have problems viewing certain PDF documents ie. when trying to load the ESS 'Code of conduct' PDF document. Adobe Reader 8.1.2 will consume CPU and memory on the front-end PC, and sometimes it will eventually load - after 15 minutes or just makes the PC unusable.
This does not happen on NW04s with SPS14 and it does not happen when using Adobe Reader 7.1.0 - which means we have ADS working correctly
We have tested this on numerous computers, including loading the PDF successfully using Adobe Reader 7.1.0, then updating Adobe Reader to 8.1.2 to find that it no longer loads the PDF.
We raised a message for the ACF installation file as per note 766191 and installed it without any success.
Has anyone else experienced this after applying SPS15? Or can suggest some things we can try?
Thanks.
Kind Regards,
Darvern

Hi,
We are also struggling with the same problem after upgrading the portal to NW04s SPS15. It is consuming 2 to 3 min for opening the PDF form in ESS under Travel & Expenses.
We are also with same version of Adobe i.e.8.1.2
Still waiting for the solution,
Regards,
Venu

Error after applying patch set 10.1.3.4.0

Hi everyone,
I downloaded the patch set 10.1.3.4.0 from [http://www.oracle.com/technology/software/products/ias/htdocs/101310.html] and intalled it on my machine but after the installation finished, I found problem in runing Oracle Process Manaer Console. When I try to login, it redirects to DomainPickup.jsp and after entering oc4jadmin id and password below message appears: No domains accessible to the user logged in.
When I click on Goto BPEL Admin and try to create a new domain, it does not accept "default" as domain id: it says "Domain already exists." when I give different name, it shows this error:
Exception
Operation failed because:
Domain creation error.
An exception occurred while attempting to create the domain "sample" at path "c:\oracle10gR1\product\10.1.3.1\OracleAS_1\bpel\domains\sample". The exception reported is:
I was using SOA suite 10.1.3.0 and it was working properly before upgrade.
I will appeciate if someone can help me to fix this problem. I could not found any note for applying this patch on download page too.
Thanks
Esfand

Hi Adina,
I tried to perform all the steps explained there but I might have missed some parts which I'm not getting it down. I could figure out the cause of problem after I searched the oracle forums for several times. It seems that this error is because of data-source settings and database server. The bpel engine can not connect to database anymore. This means that during the pachset the database settings has been altered somehow but when I check the XML files, I can't find any mistake there.
I have not worked with Oracle Lit database and do not know how to manage the database it creates therefore, I decided to install the Oracle 10g Database XE, when I go through advanced installation of SOA suite 10.3.0.1 after running IRCA, the installation is finished successfully but the same problem exists. When I checked the Connection pool in Oracle AS, it shows error from NLS data and now I'm in infinite loop how to fix this problem. After many installation / deinstallation I could not fix it so I decided to install the SOA Suite in typical mode and then connect the BPEL to oracle Database later. After the installation, I changed 3 data sources defined in Oracle AS along with its connection pool to connect to my Oracle 10g XE database having BPEL schema but it still raises some more exception and now, I have no idea what to do?!!!!
It's about 10 days that I'm struggling to get this installation done but I have not succeeded yet. I believe It should not be so hard and complex to have Oracle Suite 11g TP4 configured as it appears to happen for me. Oracle products all have straightforward installation process but this once is killing me.!!
I will appreciate any further help for windows installation.
Regards
Esfand
Edited by: user3788199 on Sep 4, 2008 3:59 AM
Edited by: user3788199 on Sep 4, 2008 4:02 AM

Problem after applying EP 8

Similar Messages

Maybe you are looking for