Problem after attempting the "Forbidden line"

After hearing about the line that causes skype to crash (Containing Http://) wont finish it as I believe the people who could help me already know about it, I attempted it with my uncle. Writing it on my laptop instantly crashed it with out sending the message, but then I tried to send it from my phone and it worked to send with out crashing my phone. It crashed my uncle as expected and skype on my laptop.
After this I removed the message that I sent from my phone, logged back in on laptop and continued using skype. But now it randomly crashes, I have not managed to find a pathern to it, been during calls, with nothing really going on at all, during chats.
I tried to clean all chat history on both phone and laptop, deleted and re-added the contact i attempted it with, with out any success to fixing it.
I hope this get fixed soon, but till then. Does anyone know any solution to make my skype crash?
(Computer that it crash on is a Dell studio 1749, with Windows 7, and yes skype is up to date.)
Thanks in advance.

Felet uppstod i programmet med namn: Skype.exe, version 7.4.80.102, tidsstämpel 0x55311f54
, felet uppstod i modulen med namn: mshtml.dll, version 11.0.9600.17801, tidsstämpel 0x5536793e
Undantagskod: 0xc0000005
Felförskjutning: 0x002a8cc0
Process-ID: 0x1118
Programmets starttid: 0x01d09e8395daa7fc
Sökväg till program: C:\Program Files (x86)\Skype\Phone\Skype.exe
Sökväg till modul: C:\Windows\SysWOW64\mshtml.dll
Rapport-ID: ef722210-0ac1-11e5-9d03-0026b9e5b246
I just realized now when I checked this that I have not updated to 7.5, so I just did and will see if that might solve my problem.
Notice for the error report is that "process-ID" change every time it crash, aswell as the "Report-ID"
And apologize for the Swedish.

Similar Messages

When I clicked on the Newest version of itunes something happened and now when I try to access the itunes store I get an error (-32-12) and it says to check my conectivity. I have three ipods and the problem is with the on line connection with itunes.

After I clicked and downloaded the newest version of itunes I no longer am able to connect with the store. I get an error (-32-12) and it says to check the connectivity. The problem is with the on line connection. I attempted to reload itunes , still the same problem exists.

... and that's a new one that I wasn't expecting ...
Okay ... lets try a complete uninstall/reinstall as per the following document:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

My computer no longer seesmy 3rd generation ipod nano. after following the on line directions to re-install I get a message it is ok to discinnect instead of do not disconnect. how to I get the ipod back onto my computer?

my computer no longer seesmy 3rd generation ipod nano. after following the on line directions to re-install I get a message it is ok to discinnect instead of do not disconnect. how to I get the ipod back onto my computer?

Hello rh3362,
I would start with this:
http://support.apple.com/kb/TS1369
Hope this helps.
~Julian

Printing problems after installing the Epson Printer Driver 2.16

Has anyone experienced any problems after installing the Epson Printer Driver 2.16 through Software Update? I am having problems printing. It denotes an error message, specifically the rastertoescpii.app isn't working?

Oops, wanted everyone to know that the driver that Software Update downloaded and installed was 2.18, not 2.16 (which was the last one that worked for me). I just got done downloading the 2.18 driver directly from the Apple support website and installing it. Guess what? My printer is now working and everything is fine. If you are having issues, I suggest this route. Guess I solved my own problem, but hope this helps someone else.

Problem after activating the ECC 6.0 DIMP

I am getting the serious problem after doing the activation of this ECC 6.0 DIMP by installing some package.
What the problem is that the tables which are having the table class W are giving the problems.
Suppose whenever you are reterving data from this type of tables it is taking so much of time and finally a runtime error is coming showing TIME OUT.
Might be after installing that package we have to regenerate the tables. and how to do that i don;t know.
So all the tables which are having the table class W ,E and S are giving the problems.
For eg table DD02l this is the table for table fields and when i am making some changes in this table by using access key and after that if i have to make activate
it , it is going for short dump and similar cases are there for the tables of the condition type.
Please give me your helpful answers to solve this issue.
Thanks

Hi
From the command prompt following command i am executing
c:\dump\oracle\NT\IA64>sapserver.cmd
After executing the command Screen1 appears
Screen1
**********************************************************************************
Specify the drive letter of the local disk where
you want to install the oracle software
Local Disk Drive [C:]:D:
SID (consists of 3 alphanumeric characters,
starting with a letter (a...z)):D11
***********************************************************************************
After giving the parameter as shown in Screen1 the Screen2 will be popup and it stay for 2min and then close automatically and screen1 will come to normal prompt
Screen2
***********************************************************************************
Starting Oracle Universal Installer...
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
Preparing to launch Oracle Universal Installer from C:\DOCUME1\ADMINI1\LOCALS~1\Temp\Orainstall2007-11-30_08-20-49PM. Please wait ...
*************************************************************************************
I cant found what is actual problem why OUI is not starting
Thanks and Regards,
Vishal Kalekar

HP 255 given problem after changing the cooling fan.

Please help, this is urgent. I changed my HP 255 cooling fan after it stopped working. when i finished replacing it with new one, i coupled back my computer and put it on. it came up with a message that the selected boot image is invalid, after series of troubleshooting by going online, i was able to eradicate the message. But am always stuck at a message that said recovery, your pc needs to be repaired. an unexpected error has occured. error code:0xc0000185. i tried repairing the operating system but there was no success. i was able to the a system recovery using HP recovery manager, the recovery was successful, but when i reboot pc after completion of recovery, it still returned me back to the message that my pc needs to be repaired. I cant even boot from the cd because i feel like downgrading it to Windows 7. Please help me, the computer is urgently need to complete my project work.
thanks

Hi - firstly, did you use any sort of ESD protection whilst working on the machine? This should be a priority due to the sensitivity of the devices on the motherboard.
Before suspecting the worst, I would make some basic checks on the hard drive. Firstly, double check it has been firmly pushed back on to the connector (I know, you have probably done this already!)
Restart your computer - when it goes through the repair process, it will offer you advanced tools - click on this.
Select Command Line (CMD) - this will give you a black window with white text. Type the following then hit the enter key -
chkdsk /r
This will take what seems like forever but let it do its thing - hopefully you just have some damaged sectors, this will find and "repair" them (actually moves the data to a better part of the disc and marks the bad sectors so they don't get used in future). Sometimes this is enough to get things working again. When it has finished, you might want to check the system files, if not, simply restart the machine but if you do, type the following into the command line -
sfc /scannow
Again this will take some time but it will find most problems with system files and replace them, however it isn't infallible.
Let me know how it goes....

DSO activation problem after creating the secondary indexes

Hi,
I am facing the problem with DSO activation after creating the secondary indexes.
Compared with Info Cubes there is no functionality available which allows dropping and recreating a secondary index before/after the data activation.
As a workaround I can write a simple report which drops and creates the indexes on database level.
By using a process chain, we can simply insert the drop index report before data activation and the create index report after the data activation process.
Can any body help me step by step procedure or Material to write the programs for delete index and create index reports on DSO object?..
Thanks in advance for your help.
Thanks & Regards,
Bala

hi,
in BI if you are using the dso for reporting then you can simply chk the settings of dso for SID generation.
no need to create the indexes or delete it.
if the dso is not used for report then no need to use indexes.
Ramesh

Issu in Rejected PR after cancelling the requistion line

Hi,
I have an issue after cancelling a requisition line in the rejected purchase requisition.
I have 2 purchase requisition lines in PR. Approver rejected the PR as one requisition has to be deleted. PR status changed to 'Rejected'. Originator cancelled the requisition line though Tool->Control and sent for approval. But the PR is still in 'Rejected' status and is not going to supervisor for approval.
How can i bring this PR to 'In progress' state so that it goes for approval.
Thanks

986936 wrote:
Hi,
I have an issue after cancelling a requisition line in the rejected purchase requisition.
I have 2 purchase requisition lines in PR. Approver rejected the PR as one requisition has to be deleted. PR status changed to 'Rejected'. Originator cancelled the requisition line though Tool->Control and sent for approval. But the PR is still in 'Rejected' status and is not going to supervisor for approval.
How can i bring this PR to 'In progress' state so that it goes for approval.
ThanksCheck whether he has cancelled one of the line or whole req..
Did he sent the req again for approval?
Mahendra

T 61 - Hard Drive problem after attempt to restore laptop to ex-factory situation

Hi all
I have a T61 Type 7664-17U from 07/10 bought at a charity auction. It came with all the disks to reset to ex-factory situation. Worked nicely for almost a year the sound indicating that there was no drivers for it. Went to Lenovo site, got the correct driver and tried to install it.
A message came that only part of the request was executed, still no sound and no driver. I log off to sign up as administrator as it could be lack of "authority" so to speak, just to discover that the person that bought it for me and installed some software he had allowed himself to set up a password for "administrator".
No other passwords exist anywhere.
Because the T61 came with lots of software that I do not use and that were just slowing it down, and also because it came from other "hands" and including for security reasons I decided that it was time, to clean the entire hard drive to ex-factory situation.
Used all the disks and everything went well until after all the disks were run and inserted the "Supplemental Disk" in the end a message came up.
No AOD file found
After auto restart was made I was instructed:
"Click next to begin Recovery Process"
then
"Preparing Hard Drive"
The laptop freezed for about 3 or 4 seconds and proceeded again on its own but the hard drive was not formatted, simply no time for it.
New auto-restart
Then a message.
"No Hard Drive Present"
Now, on a 160 GB Disk, I can only see a single partition of about 6 (six) gigabytes named SERVICE 0001
Couldn't find a way around this problem.
Can anyone help me and tell me what might have happened and how to solve this problem ?
Buying another disk is simply not an option at this time.
All the best Stilicho
IBM ThinkPad T23 2647 8MU
LENOVO ThinkPad T61 Type 7664-17U - 07-10
Solved!
Go to Solution.

Hello,
Have you tried erasing or wiping the disk using whatever tool the hard disk drive manufacturer provides, and then performing a clean install from the recovery media? If so, what effect did that have?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Problem After writing the Jfree chart into pdf

Hi All,
I am writing the Jfreechart object with my company logo into JSP and and setting the content type as "application/pdf". I am getting the error as
java.lang.IllegalStateException: getOutputStream() has already been called for this response.
I have searched for it in the google as well as sun forums for so many hours and i implements so many suggested solutions but i am unable to remove the exception.
The problem might be using response.getOutputStream() to get the output stream to in the response.
But while debugging the code I observed that I am getting the error after complete execution of the code ie. after displaying the pdf.
I am using JSF with JBoss portlets.
Could any one help me in solving this problem as soon as possible..
Thanks in advance.

I am using the fallowing code to write into response. After execution of all the code and after displaying pdf its throughing the exception
*OutputStream outStream = response.getOutputStream()*
//To get the logo path from propeties file
ResourceBundle resourceBundle = ResourceBundle.getBundle("imagepath");
                  String imagePath = resourceBundle.getString("imagepath");
                  Image image2 = Image.getInstance(imagePath);
                    image2.scaleToFit(100, 100);
                    PdfPTable pdfPTable = new PdfPTable(2);
                    pdfPTable.getDefaultCell().setBorder(0);
                    PdfPCell cell = new PdfPCell(image2);
                    cell.setHorizontalAlignment(Element.ALIGN_LEFT);
                    cell.setBorder(0);
                    pdfPTable.addCell(cell);
                    pdfPTable.addCell("");
                  //get the Pdf writer object
               PdfWriter     writer = PdfWriter.getInstance(document, outStream);
                   document.open();
               document.add(pdfPTable);
                  PdfContentByte contentByte = writer.getDirectContent();
                  PdfTemplate template = contentByte.createTemplate(1200, 750);
                  Graphics2D graphics2d = template.createGraphics(600, 750, new DefaultFontMapper());
                  Rectangle2D rectangle2d = new Rectangle2D.Double(0, 0, 540, 700);
                  jfreechart.draw(graphics2d, rectangle2d);
                  graphics2d.dispose();
                  contentByte.addTemplate(template, 50, 25);
                  //setOldchartObject(chartInfoBean);
                  System.out.println("This is before closing th edocument.");
                  document.close();

Problem after installing the flash player

Hello
after installing the flash player i can't run some videos from different sites like facebook,
how can i fix it ?
Thank you

After the problem, I have quickly installed the latest graphic driver - but allways the same problem.
Before I have installed the flash player - the power settings - windows energy settings was "Turn off the display after ten minutes." It has always worked correctly.
After I have installed the flash player - the display was gone off - but never go on - I must restart my computer.
Now I must choose "Do never turn off the display". This problem I have since 2010. Until now I did not know why. Now I have reinstalled my computer and every day another programm installed. To see what it is.
This is my PC http://www8.hp.com/de/de/hp-search/search-results.html?ajaxpage=1#/page=1&/cc=de&/lang=de& /qt=WX139EA
(I have installed 6GB RAM)

Music player problem after updating the latest ver...

After updating the latest version for my phone, everything seems perfect. But today i see there is a serious problem of the music player. I still can play the music but i cannot change to another song or exit the player because whenever i do that, it is frozen (only music player).
Does everyone have the same problem and knows how to make it work smoothly again? Thanks
Message Edited by beingkiller on 17-Jan-2010 04:14 AM

HI even my phone has stopped responding. I had a backup file in .nbu format created using the PC suite. I restored the phone using the backup file but it didnot help me. I cannot play even 3 songs consecutively, the player is getting hang and I am forced to restart. Please do not update your firmware. All the problems after I updated my firmware to 40.0.005 version. I am planning to take my phone to nokia care and reset the whole software once again so that it comes with the factory settings.

Printer problem after upgrading the Mac HD disk

After replacing the Mac HD on my Mac Pro, and copying all the "old" data from the "old" Mac HD using Migration Assistance, I cannot print. Getting "communication error". Re-installing drivers does not help. The printer is a Canon MF4350d connected over USB. Is there files somewhere (USB drivers?) that may affect this issue. Or can how can I delete all (Canon) printer drivers and make a clean install?

First, make a backup of all your data or you entire system. Then you will follow the instructions in the link below to erase the Yosemite volume and reinstall Yosemite from scratch. After assuring it is working properly you can restore your third-party software from original media. Be sure the software is compatible with Yosemite. Finally, restore your data from your backup.
Install or Reinstall Yosemite, Mavericks, Mountain Lion, or Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.

Ipod Touch 2G now 'useless' after attempting the IOS4

Hopefully Apple have an inclination ho to resolve this. My 2G Touch was fine and for months I didnt bother with the IOS 3 upgrade as I 1) didnt want to pay for it and 2) didnt think I would use many of the features. However after finding more and more apps needed the new software I decided to do it today. To my surprise, the IOS 3 was now replaced with IOS 4 and it was free......result. I followed the instrcutions and while it attempted to load the drivers......it couldnt and I cannot recover my Ipod. Device isnt recognised now when I plug in the USB. I get yellow exclamation marks for the apple mobile device recovery driver.My Touch,no matter what I do has a picture of a USB cable on it.I have uninstalled and reinstalled Itunes.........all to no avail. Any help would be great..........PLEASE

Sorry you have had so many problems. You are going to need to tackle this one step at a time.
PC
1. You must have at least Windows XP, service pack 2.
2. Use Control Panel to delete all Apple Software - iTunes, Apple Mobile Device Services, QuickTime, etc.
3. Reboot your computer
4. Download and install iTunes 9
5. Turn off anti-virus and download the iOS4 update
6. Turn off your firewall before you begin the the update process on your touch
iPod touch
1. Make sure it is unplugged from your computer
2. Hold down the Sleep/Wake button and turn it off (it may not respond to this)
3. Start iTunes on your computer
4. Press and hold the Home button on your touch. Keep holding this button down and plug your touch back into your computer. Keep holding it until iTunes says "an iPod has been detected in recovery mode".
5. Follow the on screen instructions.
If you encounter any errors, note the number. More information on those errors can be found in the Apple tech article: http://support.apple.com/kb/TS1275

Font problems after upgrading the OS today

I upgraded this morning to 10.6.3. After upgrading:
In Keynote and in Pages several fonts (10 or more) like Cochin, Optima, etc. are not useable any more. If I open a document all characters of a text written in these fonts have changed and compressed in one place in the textboxes. Keyboard layout of the keys is also destroyed. If I change the font to one which is ok , the text is ok too. Disabling the font or changing the fonts in question is the only way to go now.
The preview of the first page of a document in finder for those fonts is still correct. Also the display of the font in the font-program is correct. If I cut and paste text to a different program, the text will be display correctly for the fonts in question.
This seemed an internal problem of iWorks. Help wanted.
regards
esser

Welcome to the discussions, f.esser.
There are two things I'd try, first, to see how large the problem is, create a new user on your computer and see if there's a problem with those same fonts under that user. If not, that indicates that something under your main user has been installed that affects that usage. If you still see problems under the second user, then it's a deeper OS problem.
Second, reinstall iWork from the disk. If it's a minor problem with iWork and the new OS, performing that, then updating to the latest iWork should fix it.

Problem after attempting the "Forbidden line"

Similar Messages

Maybe you are looking for