Problem after creating a method

hi
private IWDCachedWebResource getCachedWebResource(byte[] file, String name,
  WDWebResourceType type) {
  IWDCachedWebResource cachedWebResource = null;
  if (file != null) {
    cachedWebResource = WDWebResource.getWebResource(file, type);
    cachedWebResource.setResourceName(name);
  return cachedWebResource;
i  was trying to create above method  , but  during creation of the  parameter for the method , i need to create  byte[] 
but  iam not able  to  ,
can any one help me ,

Hi,
Create this method in the following section, which comes at the end
//@@begin others
//Your Method
//@@end
Regards
Ayyapparaj

Similar Messages

  • DSO activation problem after creating the secondary indexes

    Hi,
        I am facing the problem with DSO activation after creating the secondary indexes.
    •  Compared with Info Cubes there is no functionality available which allows dropping and recreating a secondary index before/after the data activation.
    As a workaround I can write a simple report which drops and creates the indexes on database level.
    By using a process chain, we can simply insert the drop index report before data activation and the create index report after the data activation process.
    Can any body help me step by step procedure or Material to write the programs for delete index and create index reports on DSO object?..
    Thanks in advance for your help.
    Thanks & Regards,
    Bala

    hi,
    in BI if you are using the dso for reporting then you can simply chk the settings of dso for SID generation.
    no need to create the indexes or delete it.
    if the dso is not used for report then no need to use indexes.
    Ramesh

  • Network Problem After Creating Database

    Hi,
    We install Oracle 11g on Windows 2008 server. Everything is working fine till the installation of Oracle software. After creating the database when we restart server the network cable shows a unplug for 20 miniutes.
    If we disable all the Oracle service than everything goes fine.
    Please Suggest.
    Thanks and Regards
    Sarfaraz Zomberkar

    This is an interesting problem. Please provide a little more information.
    * When you state Oracle 11g, exactly which release version: 11.1.0.6, 11.1.0.7, 11.2.0.1, or 11.2.0.2 - did you install the 32 bit Database software or the 64 bit Database software?
    * Which options were selected during the installation, and did you tell the installer to create a database during the installation?
    * Exactly which Windows 2008 server version: R1 or R2 - and is the operating system 32 bit or 64 bit?
    * How much memory is in the Windows server?
    * How many network cables are connected between the server and a network switch(es) - you will probably need to look at the back of the server to determine this answer?
    * What are the exact names of the Oracle services that you had to shut down - most likely, the Startup Type of those services are set to "Automatic"
    * Have the appropriate network person take a look at the log of errors on the network switch that is connected to the server - there is a chance that the network switch sensed a problem, such as excessive transmission errors, and shut down the network port to prevent a broadcast storm or a similar problem.
    * Have the appropriate person check the Windows event logs. Do those logs identify the reason why the network port went down?
    Charles Hooper
    Co-author of "Expert Oracle Practices: Oracle Database Administration from the Oak Table"
    http://hoopercharles.wordpress.com/
    IT Manager/Oracle DBA
    K&M Machine-Fabricating, Inc.

  • Problem after creating a Photo Book

    After creating a 100 Pages Hardcover Book, I can't buy it, because Iphoto opens a window, saying that not all pages are filled with photos. verity I try, it goes back to one page, but this page is perfectly filled like all the others, no missing photos or empty frames at all.
    ried to change photos and layout, with no result. Cant buy this book.
    What can I do? I don't want to create a whole new Book

    You may have still a placeholder photo as the backdrop for your pictures.  Check the page layout, if it is using an image background. Then you need to change the background or add background picture:
    If you used the Golden Gate Bridge background, drag a photo to the background.

  • Problems after creating report object

    I am using Crystal Reports Server XI R2 SP4. I created a report object from a simple Crystal report successfully. Even the thumbnail showed the report data even though the report does not save data.
    However when I view the report object in InfoView or schedule it there is no report data even though Crystal Reports Viewer displays data when run against the same DB with the same parameters.
    I get the same results with any report object I create in CMC but I was to able to successfully create and run report objects the first few(5) times after which I have been getting this result.
    Is there any kind of report or job limit?
    I made max records to retrieve unlimited and bumped # of jobs in every server from 5 to 50 and the age of oldest report to retrieve from cache to 0 mins.
    Please help!

    I'm not sure this is a JAVA problem, but if you're getting an ACCESS_VIOLATION exception from the JVM a method that provides more detailed information is to check for exceptions after every JAVA function called from the native code with (*jenv)->ExceptionCheck(jenv) and if true get information with (*jenv)->ExceptionDescribe(jenv) Making mistakes in native code constructing JAVA objects has been my most frequent cause of ACCESS_VIOLATION exceptions. I hope this helps.

  • Problem after creating second library

    So I finally decided to create a second library where I placed my aac rips for my ipods. Everything seemed fine.
    When I restarted iTunes for the first time after that procedure I held down the option key to pull up the "choose library" dialog box. This is where the problems start. It just directed me to the root of my external HD where my library is held. I thought a dialog box or something would come up letting me choose between my newly created "IPOD LIBRARY" and my regular library. No such luck so I just pointed to the main iTunes folder and iTunes started to launch but with an "updating iTunes" box and it started doing its thing(Why? I have no idea). Keep in mind I have 5000 or so albums in my library. In the background I noticed at the bottom of the interface that it is showing WAY less albums, etc. than I know I have. I didn't want to do a force quit or anything while it was updating because I thought I might corrupt everything. What it did was load an old .xml file from 10 months ago so anything I've imported since last April is not loading into my library. I've tried to restart and choose a newer .xml file in hopes of it being the correct one but what it's loading IS the newest file. What the **** happened? I don't want to lose the countless hours I've spent inserting all sorts of custom tags and groups and such.
    Message was edited by: Eric Jenkins

    No one has any insight with this problem?

  • Problem after creating a costumer view

    hi guys,
    i just created a new view from a costumer table.
    the problem is that when i access the view from sm30, i click on add new entries, and some fields have label and some has only the +, symbol, i dont now why!
    something like this:
    begda___________
    endda___________
    user ____________
    +_______________
    +_______________
    +_______________
    any ideas?
    tks in advance.

    Usually you see + symbol if you use a builtin datatype
    in the table instead of a data element.
    You can resolve the issue in two ways.
    1.You can go to SE54 enter the vie name and select generated objects and click on Change.
    After going inside select Environment--> Modification --> Maintainence screens.
    Select the screen and go to the layout and maintain the descriptions.
    2. Change the table and add data element to the fields for which you have maintained built  in data types.
    Delete the maintainance view and regerate from the transaction SE54. You will see the descriptions.
    Regards
    Sudhir Atluru

  • Problem after creating data control

    hi when i test my view before i create my data control is ok but after i right click my java class and click create data control am having this error when testing my view

    the error is [986] oracle.jbo.ApplicationModuleCreateException: JBO-25222: Unable to create application module.
         at oracle.jbo.server.ApplicationModuleHomeImpl.create(ApplicationModuleHomeImpl.java:97)
         at oracle.jbo.common.ampool.DefaultConnectionStrategy.createApplicationModule(DefaultConnectionStrategy.java:158)
         at oracle.jbo.common.ampool.DefaultConnectionStrategy.createApplicationModule(DefaultConnectionStrategy.java:73)
         at oracle.jbo.common.ampool.ApplicationPoolImpl.instantiateResource(ApplicationPoolImpl.java:2912)
         at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:580)
         at oracle.jbo.common.ampool.ApplicationPoolImpl.prepareApplicationModule(ApplicationPoolImpl.java:2472)
         at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2346)
         at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:3245)
         at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:571)
         at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:504)
         at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:499)
         at oracle.adf.model.bc4j.DCJboDataControl.initializeApplicationModule(DCJboDataControl.java:517)
         at oracle.adf.model.bc4j.DCJboDataControl.getApplicationModule(DCJboDataControl.java:867)
         at oracle.jbo.jbotester.binding.TesterBinding.getConnectionInfo(TesterBinding.java:222)
         at oracle.jbo.jbotester.MainFrame.initializeDataControl(MainFrame.java:945)
         at oracle.jbo.jbotester.MainFrame.loadConfiguration(MainFrame.java:646)
         at oracle.jbo.jbotester.MainFrame.processArgs(MainFrame.java:612)
         at oracle.jbo.jbotester.MainFrame.main(MainFrame.java:446)
    Caused by: java.lang.NullPointerException
         at java.util.concurrent.ConcurrentHashMap.put(ConcurrentHashMap.java:882)
         at oracle.jbo.server.ApplicationModuleImpl.addChild(ApplicationModuleImpl.java:1182)
         at oracle.jbo.server.ApplicationModuleImpl.doCreateViewObject(ApplicationModuleImpl.java:4031)
         at oracle.jbo.server.AMViewUsage.createViewObject(AMViewUsage.java:112)
         at oracle.jbo.server.ApplicationModuleDefImpl.loadViewObject(ApplicationModuleDefImpl.java:655)
         at oracle.jbo.server.ApplicationModuleDefImpl.loadComponents(ApplicationModuleDefImpl.java:916)
         at oracle.jbo.server.ApplicationModuleImpl.createRootApplicationModule(ApplicationModuleImpl.java:489)
         at oracle.jbo.server.ApplicationModuleHomeImpl.create(ApplicationModuleHomeImpl.java:86)
         ... 17 more
    ## Detail 0 ##
    java.lang.NullPointerException
         at java.util.concurrent.ConcurrentHashMap.put(ConcurrentHashMap.java:882)
         at oracle.jbo.server.ApplicationModuleImpl.addChild(ApplicationModuleImpl.java:1182)
         at oracle.jbo.server.ApplicationModuleImpl.doCreateViewObject(ApplicationModuleImpl.java:4031)
         at oracle.jbo.server.AMViewUsage.createViewObject(AMViewUsage.java:112)
         at oracle.jbo.server.ApplicationModuleDefImpl.loadViewObject(ApplicationModuleDefImpl.java:655)
         at oracle.jbo.server.ApplicationModuleDefImpl.loadComponents(ApplicationModuleDefImpl.java:916)
         at oracle.jbo.server.ApplicationModuleImpl.createRootApplicationModule(ApplicationModuleImpl.java:489)
         at oracle.jbo.server.ApplicationModuleHomeImpl.create(ApplicationModuleHomeImpl.java:86)
         at oracle.jbo.common.ampool.DefaultConnectionStrategy.createApplicationModule(DefaultConnectionStrategy.java:158)
         at oracle.jbo.common.ampool.DefaultConnectionStrategy.createApplicationModule(DefaultConnectionStrategy.java:73)
         at oracle.jbo.common.ampool.ApplicationPoolImpl.instantiateResource(ApplicationPoolImpl.java:2912)
         at oracle.jbo.pool.ResourcePool.createResource(ResourcePool.java:580)
         at oracle.jbo.common.ampool.ApplicationPoolImpl.prepareApplicationModule(ApplicationPoolImpl.java:2472)
         at oracle.jbo.common.ampool.ApplicationPoolImpl.doCheckout(ApplicationPoolImpl.java:2346)
         at oracle.jbo.common.ampool.ApplicationPoolImpl.useApplicationModule(ApplicationPoolImpl.java:3245)
         at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:571)
         at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:504)
         at oracle.jbo.common.ampool.SessionCookieImpl.useApplicationModule(SessionCookieImpl.java:499)
         at oracle.adf.model.bc4j.DCJboDataControl.initializeApplicationModule(DCJboDataControl.java:517)
         at oracle.adf.model.bc4j.DCJboDataControl.getApplicationModule(DCJboDataControl.java:867)
         at oracle.jbo.jbotester.binding.TesterBinding.getConnectionInfo(TesterBinding.java:222)
         at oracle.jbo.jbotester.MainFrame.initializeDataControl(MainFrame.java:945)
         at oracle.jbo.jbotester.MainFrame.loadConfiguration(MainFrame.java:646)
         at oracle.jbo.jbotester.MainFrame.processArgs(MainFrame.java:612)
         at oracle.jbo.jbotester.MainFrame.main(MainFrame.java:446)
    [987] JUErrorHandlerDlg.reportException(oracle.jbo.jbotester.ErrorHandler$ExceptionWrapper)
    [988] UIMessageBundle (language base) being initialized

  • Automatic Mailbox Distribution problem after Creating New AD Site

    We redesigned our Active Directory Sites a little while ago.  We moved the subnets and servers from the old sites to the new sites.  We haven't removed the old sites yet, but that will happen soon.  We haven't noticed any issues with the new
    sites except for one weird issue and that is that Automatic Mailbox Distribution no longer works, in fact if you don't specify a database with the enable-mailbox (or new-mailbox) commands it will fail with an error that load balancing failed to find a valid
    mailbox.
    The problem, from the output of an enable-mailbox, command appears to be a site problem (from the fact that the automatic mailbox distribution discards sites that are not in the same site as the user).  The verbose output has the command checking the
    old site even though the server is in the new site.  I've already checked the databases and none of them have the IsExcludedFromProvisioning or IsSuspendedFromProvisioning properties set to TRUE
    My question is how do I make the databases show up as in the new site rather than the old site?
    Any and all help with this issue is appreciated.
    This is the output from the command:
    VERBOSE: [16:36:50.864 GMT] Enable-Mailbox : Initializing Active Directory server settings for the remote Windows
    PowerShell session.
    VERBOSE: [16:36:50.864 GMT] Enable-Mailbox : Active Directory session settings for 'Enable-Mailbox' are: View Entire
    Forest: 'False', Default Scope: 'domain.local', Configuration Domain Controller: 'DC01.domain.local', Preferred Global
    Catalog: 'VMDC01.domain.local', Preferred Domain Controllers: '{ VMDC01.domain.local }'
    VERBOSE: [16:36:50.864 GMT] Enable-Mailbox : Runspace context: Executing user: domain.local/All Users/AD/Admin1,
     Executing user organization: , Current organization: , RBAC-enabled: Enabled.
    VERBOSE: [16:36:50.864 GMT] Enable-Mailbox : Beginning processing &
    VERBOSE: [16:36:50.880 GMT] Enable-Mailbox : Instantiating handler with index 0 for cmdlet extension agent "Query Base
    DN Agent".
    VERBOSE: [16:36:50.880 GMT] Enable-Mailbox : Instantiating handler with index 1 for cmdlet extension agent "Rus Agent".
    VERBOSE: [16:36:50.880 GMT] Enable-Mailbox : Instantiating handler with index 2 for cmdlet extension agent "Mailbox
    Resources Management Agent".
    VERBOSE: [16:36:50.880 GMT] Enable-Mailbox : Instantiating handler with index 3 for cmdlet extension agent "Mailbox
    Creation Time Agent".
    VERBOSE: [16:36:50.880 GMT] Enable-Mailbox : Instantiating handler with index 4 for cmdlet extension agent
    "Provisioning Policy Agent".
    VERBOSE: [16:36:50.880 GMT] Enable-Mailbox : Instantiating handler with index 5 for cmdlet extension agent "Admin Audit
     Log Agent".
    VERBOSE: [16:36:50.927 GMT] Enable-Mailbox : Current ScopeSet is: { Recipient Read Scope: {{, }}, Recipient Write
    Scopes: {{, }}, Configuration Read Scope: {{, }}, Configuration Write Scope(s): {{, }, }, Exclusive Recipient Scope(s):
     {}, Exclusive Configuration Scope(s): {} }
    VERBOSE: [16:36:50.927 GMT] Enable-Mailbox : Searching objects "domain.local/All Users/SM/GP/User1" of type
    "ADUser" under the root "$null".
    VERBOSE: [16:36:50.942 GMT] Enable-Mailbox : Previous operation run on domain controller 'VMDC01.domain.local'.
    VERBOSE: [16:36:50.974 GMT] Enable-Mailbox : Load Balance : Database container located at 'CN=Databases,CN=Exchange
    Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=DOMAIN,CN=Microsoft
    Exchange,CN=Services,CN=Configuration,DC=DOMAIN,DC=local'.
    VERBOSE: [16:36:50.974 GMT] Enable-Mailbox : Searching objects of type "MailboxDatabase" with filter
    "(&((IsExcludedFromProvisioning Equal False)(IsSuspendedFromProvisioning Equal False)(Recovery Equal False)))", scope
    "OneLevel" under the root "Databases".
    VERBOSE: [16:36:51.005 GMT] Enable-Mailbox : Comparing local site 'OLD-SITENAME' with database site 'OLD-SITENAME'.
    VERBOSE: [16:36:51.021 GMT] Enable-Mailbox : Comparing local site 'OLD-SITENAME' with database site 'OLD-SITENAME'.
    VERBOSE: [16:36:51.021 GMT] Enable-Mailbox : Comparing local site 'OLD-SITENAME' with database site 'OLD-SITENAME'.
    VERBOSE: [16:36:51.021 GMT] Enable-Mailbox : Comparing local site 'OLD-SITENAME' with database site 'OLD-SITENAME'.
    VERBOSE: [16:36:51.021 GMT] Enable-Mailbox : Comparing local site 'OLD-SITENAME' with database site 'OLD-SITENAME'.
    VERBOSE: [16:36:51.021 GMT] Enable-Mailbox : Comparing local site 'OLD-SITENAME' with database site 'OLD-SITENAME'.
    VERBOSE: [16:36:51.036 GMT] Enable-Mailbox : Comparing local site 'OLD-SITENAME' with database site 'OLD-SITENAME'.
    VERBOSE: [16:36:51.036 GMT] Enable-Mailbox : Comparing local site 'OLD-SITENAME' with database site 'OLD-SITENAME'.
    VERBOSE: [16:36:51.036 GMT] Enable-Mailbox : Comparing local site 'OLD-SITENAME' with database site 'OLD-SITENAME'.
    VERBOSE: [16:36:51.036 GMT] Enable-Mailbox : Comparing local site 'OLD-SITENAME' with database site 'OLD-SITENAME'.
    VERBOSE: [16:36:51.036 GMT] Enable-Mailbox : Comparing local site 'OLD-SITENAME' with database site 'OLD-SITENAME'.
    VERBOSE: [16:36:51.036 GMT] Enable-Mailbox : Comparing local site 'OLD-SITENAME' with database site 'OLD-SITENAME'.
    VERBOSE: [16:36:51.052 GMT] Enable-Mailbox : Comparing local site 'OLD-SITENAME' with database site 'OLD-SITENAME'.
    VERBOSE: [16:36:51.052 GMT] Enable-Mailbox : Comparing local site 'OLD-SITENAME' with database site 'OLD-SITENAME'.
    VERBOSE: [16:36:51.052 GMT] Enable-Mailbox : Comparing local site 'OLD-SITENAME' with database site 'OLD-SITENAME'.
    VERBOSE: [16:36:51.052 GMT] Enable-Mailbox : Comparing local site 'OLD-SITENAME' with database site 'OLD-SITENAME'.
    VERBOSE: [16:36:51.067 GMT] Enable-Mailbox : Comparing local site 'OLD-SITENAME' with database site 'OLD-SITENAME'.
    VERBOSE: [16:36:51.067 GMT] Enable-Mailbox : Comparing local site 'OLD-SITENAME' with database site 'OLD-SITENAME'.
    VERBOSE: [16:36:51.067 GMT] Enable-Mailbox : Comparing local site 'OLD-SITENAME' with database site 'OLD-SITENAME'.
    VERBOSE: [16:36:51.067 GMT] Enable-Mailbox : Comparing local site 'OLD-SITENAME' with database site 'OLD-SITENAME'.
    VERBOSE: [16:36:51.067 GMT] Enable-Mailbox : Load Balance : The search for databases returned an empty result. This
    could happen if all databases are excluded from the Load Balance process.
    VERBOSE: [16:36:51.067 GMT] Enable-Mailbox : Load Balance : There is no available database. Refer to previous verbose
    messages for more information.
    VERBOSE: [16:36:51.067 GMT] Enable-Mailbox : Admin Audit Log: Entered Handler:OnComplete.
    Load balancing failed to find a valid mailbox database.
        + CategoryInfo          : NotSpecified: (0:Int32) [Enable-Mailbox], RecipientTaskException
        + FullyQualifiedErrorId : 4AE0EA04,Microsoft.Exchange.Management.RecipientTasks.EnableMailbox
    VERBOSE: [16:36:51.083 GMT] Enable-Mailbox : Ending processing &

    Hi,
    From your description, I would like to clarify the following thing:
    By default, all online and healthy mailbox databases on Exchange 2010 servers in the local Active Directory site can be chosen by automatic mailbox distribution to store a new or moved mailbox. Mailbox databases in other AD site can't be chosen by automatic
    mailbox distribution to store a new or moved mailbox.
    What's more, I recommend you use the following cmdlet to enable mailbox and check the result.
    Enable-Mailbox -Identity xxx -Database xxx
    Hope it helps.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Problem after creating a custom theme

    Hi guys,
    I created a new theme into Apex. Actually, I just changed the page "No tabs" from the basic blue template.
    Then I applied this new theme to an application (this application perfectly works with the basic blue template from Apex).
    The result seems good, my theme looks like what I wanted, but the application is "dead"!
    It seems that the processes are all inactive when I apply my theme. Everything comes back to normal when I put again the basic template from Apex.
    Does anyone have an idea about this? I certainly dropped something in my theme, but at the moment, I don't know what it could be...
    Thanks for reading.
    Ludo
    Edited by: dovik on May 4, 2010 9:14 AM

    Hi
    I don't have any error when I run the application. It just doesn't do anything!
    And I didn't forget to put the #HEAD# substitution, my theme starts like this :
    <html lang="&BROWSER_LANGUAGE." xmlns:htmldb="http://htmldb.oracle.com">
    <head>
    #HEAD#Thanks anyway.
    Edited by: dovik on May 4, 2010 9:37 AM

  • Problem after creating a module !!!

    Hi Experts,
    I was trying to put my hands on EJB development and took the help of the paper "Step by step guide to develop a module for reading file name in a sender file adapter" by Krishnakumar Ramamoorthy.
    Now that everything was developed and deployed when my file adapter polls for the file this is what i get ....
    Sender Adapter v2024 for Party '', Service 'BS_XIPOC':
    Configured at 2006-03-14 17:52:23 IST
    History:
    - 2006-03-14 17:53:20 IST: Retry interval started. Length: 10.000 s
    - 2006-03-14 17:53:20 IST: Error: java.lang.ClassCastException
    - 2006-03-14 17:53:20 IST: Processing started
    - 2006-03-14 17:53:10 IST: Error: java.lang.ClassCastException
    - 2006-03-14 17:53:10 IST: Processing started
    Can somebody help me out !!!!
    Regards,
    ShabZ

    hi Shabarish,
    if I where to guess I'd say that the name
    of your adapter module is not correct (or the path)
    check in the Visual Admin - deploy
    if your name is correct
    or maybe you did not set the name in your
    adapter module
    <jndi-name>modulename</jndi-name>
    Regards,
    michal
    <a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI FAQ - Frequently Asked Questions</a>

  • My Dows iMac does not Boot up into the OS nor into the DVD after creating..

    Hi All,
    I ended up in strange situation where iMac doesn't even Boot, neither from the HD nor from the DVD, I ended up with this problem after creating a Bootcamp partition on my iMac.
    I tried all the possible troubleshooting methods given in the Apple trouble shooting guide. but no use.
    the current state of my iMAC is when start it it simple displays the blank white screen and doesn't progress any further.
    and when I reboot the machine and hold the C button, it displays a faint folder icon in the center.
    please help me , if any one has encountered the same problem.
    Thanks in advance.
    Regards,
    Narik

    If you start up with the Option key, as far as I remember, there is no mouse icon. You may need to use the arrow keys to select a bootable disk.
    OK, holding down the mouse button is the accepted (and correct) way to eject a disk at startup.
    Try putting in the disk before startup. Then hold down the C key when you press the power button. It can take a time to read an install disk. However, if it is not reading the disk there may be more problems.
    Have you tried a safe boot: Use the Shift key at start.
    Serious Stuff:
    I know you are new to Macs, but as an alternative, try to startup and hold down the Command + S keys. This should put you into single user mode and it will all look like a black screen with white writing. When it stops you should see a $ sign -- this is the command line. As a first step, just type in the single word - reboot - and press the return key.
    If that works we can try something else.
    It may be, of course, that while creating your Boot Camp partition, you erased everything. Great care needs to be taken with these functions. That would not, however, prevent the disk from booting.

  • Invoice Tax left after create credit memo (Receivable)

    Hi All,
    I have problem after creating Credit Memo(CM) in Receivable. The invoice line become 0 but invoice tax still appear.
    It's caused the tax in CM is 0, even the line value have match value.
    Can anyone help me?
    Best regards,
    Erie

    Anyone help?

  • Facing problem in creating socket in a method from an already deployed application exe while same method is working from another exe from same environment from same location.

    Dll Created In: - MFC VC
    6.0
    Application Exe Developed In:
    - VC 6.0, C# and VB.net (Applications which are using dll)
    OS: - Windows XP sp2 32bit
    / Windows Server 2008 64 bit
    Problem: - Facing problem in creating socket
    in a method from an already deployed application exe while same method is working from another exe from same environment from same location.
    Description: - We have product component which
    has an exe component and from exe we invoke a method, which is defining in dll, and that dll is developed in MFC VC6.0. In the dll we have a method which downloads images from another system after making socket connection. But every time we are getting Error
    code 7, it is not giving desire result while same method is working from another exe from same environment from same location. And also me dll is deployed on many systems and giving proper output from same application.
    Already Attempt: - Because error is coming on
    client side so what we did, we created a driver in C# which invokes same method from same environment(on client machine) using same dll and we are astonished because it worked fine there.
    Kindly Suggest: -
    We are not able to figure out root cause because nothing is coming in windows event logs but what I did, for finding the problem line, I wrote logs on each line and found the exact line in application exe which is not working,
    actually  it is not executing Create () method,
    I will give snippet of the code for understanding the problem because we are not finding any kind solution for it.
    Kindly assist us in understanding and fixing this problem.
    Code Snippet: -
    Int Initialize (LPTSTR SiteAddress, short PortId)
    try
    CClientTSSocket *m_pJtsSockto;
    m_pJtsSockto = new CClientTSSocket;
    LONG lErr = m_pJtsSockto->ConnectTS(csIPAddress,PortId);
    ErrorLog (0, 0, "--------ConnectTS has been called ------------","" );
    catch(...)
    DWORD errorCode = GetLastError();
    CString errorMessage ;
    errorMessage.Format("%lu",errorCode);
    ErrorLog (0, 0, "Image System", (LPTSTR)(LPCTSTR)errorMessage);
    return  IS_ERR_WINDOWS;
    Note: -
    CClientTSSocket extends CAsyncSocket
     IS_ERR_WINDOWS is a macro error code which value I found 7.
    LONG ConnectTS(CString strIP, UINT n_Port)
    ErrorLog(0,0,"ConnectTS is calling Create [is going to call]","");
    if(!Create())
    ErrorLog(0,0,"ConnectTS is calling [Create not called successfully] ","");
     n_Err = GetLastError();
     ErrorLog(n_Err,0,"ConnectTS is calling1111111111111111Erorrrrrrrrrrrrr","");
    return NET_INIT;
    ErrorLog(0,0,"ConnectTS is calling2222222222222222222","");
    if(!AsyncSelect(0))
    n_Err = GetLastError();
    return NET_INIT;
    if(!Connect(strIP,n_Port))
    n_Err = GetLastError();
    ErrorLog(n_Err,0,"ConnectTS","");
    return SERVER_NOT_CONNECTED;
    Code description: -
    From
    int GETImage_MT() method we call Initialize() method and pass client machine IP and Port and there we call
    ConnectTS() method, In this method we Create() method and finally it returns the error code as mention in macro 7.
    Logs after running the program: -
    --------ConnectTS has been called ------------
    ConnectTS is calling Create [is going to call]
    Image System 
    0
    Note: - According to logs, problem is coming in Create method().
    Here 0 is errorMessage received in catch block. And from catch block it returns macro value 7. And when we run same method individually from same machine, same environment through same dll
    from different exe, it is working fine and we are facing any kind of problem. While same problem application was working properly earlier but now continuously it showing problem.
     Kindly assist us to resolve the issue.

    Pointer variable was already initialized; I have mention in code; kindly assist us.
    Dll Created In: - MFC VC 6.0
    Application Exe Developed In: - VC 6.0, C# and VB.net (Applications which are using dll)
    OS: - Windows XP sp2 32bit / Windows Server 2008 64 bit
    Problem: - Facing problem in creating socket
    in a method from an already deployed application exe while same method is working from another exe from same environment from same location.
    Description: - We have product component
    which has an exe component and from exe we invoke a method, which is defining in dll, and that dll is developed in MFC VC6.0. In the dll we have a method which downloads images from another system after making socket connection. But every time we are getting
    Error code 7, it is not giving desire result while same method is working from another exe from same environment from same location. And also me dll is deployed on many systems and giving proper output from same application.
    Already Attempt: - Because error is coming
    on client side so what we did, we created a driver in C# which invokes same method from same environment (on client machine) using same dll and we are astonished because it worked fine there.
    Kindly Suggest:
    - We are not able to figure out root cause because nothing is coming in windows event logs but what I did, for finding the problem line, I wrote logs on each line and found the exact line in application exe which is not
    working, actually it is not executing Create () method, I will give snippet of the code for understanding
    the problem because we are not finding any kind solution for it. Kindly assist us in understanding and fixing this problem.
    Code Snippet: -
    Int Initialize (LPTSTR SiteAddress, short PortId)
    try
    CClientTSSocket *m_pJtsSockto;
    m_pJtsSockto = new CClientTSSocket;
    LONG lErr = m_pJtsSockto->ConnectTS(csIPAddress,PortId);
    ErrorLog (0, 0, "--------ConnectTS has been called ------------","" );
    catch(...)
                       DWORD errorCode = GetLastError();
                       CString errorMessage ;
                       errorMessage.Format("%lu",errorCode);
                       ErrorLog (0, 0, "Image System", (LPTSTR)(LPCTSTR)errorMessage);
                       return  IS_ERR_WINDOWS;
    Note: - CClientTSSocket extends CAsyncSocket
     IS_ERR_WINDOWS is a macro error code which value I found 7.
    LONG ConnectTS(CString strIP, UINT n_Port)
              ErrorLog(0,0,"ConnectTS is calling Create [is going to call]","");
              if(!Create())
                       ErrorLog(0,0,"ConnectTS is calling [Create not called successfully] ","");
              n_Err = GetLastError();
              ErrorLog(n_Err,0,"ConnectTS is calling1111111111111111Erorrrrrrrrrrrrr","");
                      return NET_INIT;
              ErrorLog(0,0,"ConnectTS is calling2222222222222222222","");
              if(!AsyncSelect(0))
                       n_Err = GetLastError();
                       return NET_INIT;
              if(!Connect(strIP,n_Port))
                       n_Err = GetLastError();
                       ErrorLog(n_Err,0,"ConnectTS","");
                       return SERVER_NOT_CONNECTED;
    Code description: - From int GETImage_MT() method
    we call Initialize() method and pass client machine IP and Port and there we call ConnectTS() method, In
    this method we Create() method and finally it returns the error code as mention in macro 7.
    Logs after running the program: -
    --------ConnectTS has been called ------------
    ConnectTS is calling Create [is going to call]
    Image System  0
    Note: - According to logs, problem is coming in Create method(). Here
    0 is errorMessage received in catch block. And from catch block it returns macro value 7. And when we run same method individually from same machine, same environment through same dll from different exe, it is working fine and we are facing any kind of problem.
    While same problem application was working properly earlier but now continuously it showing problem.
     Kindly assist us to resolve the issue.

  • I am unable to register my debit card after creating my apple ID. Whenever i click enter after filling all the debit card details, it shows that, "your payement method has been declined". Please help me people, why is it so.?

    I am unable to register my debit card after creating my apple ID. Whenever i click "continue" after filling all the debit card details, it shows that, "Your payement method has been declined". Please help me people, why is it so.? Also, i would ike to tell that my bank is, Union Bank Of India and it facilitates the auto conversion, rupee to dollar.. I think there is a different problem. Please help me guys.!!

    The card must be issued in the same country as the store you are trying to use. If you're trying to sign up for the US Apple Store, it must be a US card with a US billing address. If you're trying to sign up in India, it must be an Indian card with an Indian billing address.
    Apple will run a small charge, which will be credited back, to make sure the card is valid. If it is a debit card and you do not have enough in the account to cover the authorization, it will be declined.
    It is possible the currency conversion you mentioned may be causing a problem. Contact the issuing bank if you are sure you have enough in the account and you are signing up for the correct store.

Maybe you are looking for