Problem after downloading latest software update

Just downloaded the latest software update and it has totally fried my Z10. Can't turn it on, doesn't charge. Has anyone else had this problem?

Hi Agrajag17,
Welcome to the BlackBerry Support Community.
Was the software update interupted at all? Was it a wireless update and was your BlackBerry Z10 smartphone connected to a power source during the update?
Do you see an LED light when you connect it to a power source and try removing and reinserting the battery again?
I look forward to your response.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

Similar Messages

IMac unable to restart after downloading latest software update (including iTunes 11.2)

My system is a mid-2007 iMac (Intel) with latest software updates always promptly installed (OSX Mavericks, etc) and 320 GB internal HD, 4GB Ram.
Today the software updater informed me that an update to iTunes was available and so I allowed it to download the update and then restart the computer. The restart was not successful - the computer display will show the status window progressing as the update is installed and then nears completion, but will freeze at the apparant point of completion and the restart will not complete. I tried restarting several times and it always hangs up and does not complete.
I then ran the Disc Utilities program - first time I ran it, it identified disc problems with the internal HD and proceeded to repair them. Following that I trried to restartt and it ran into the same difficulties and did not restart. Subsequently I ran disc utilities and it reports the internal HD to be fine. I've also tried several times to boot the computer and restore from my Time Machine backups and it will not complete the restore. I do get to the screens where I can select the volume to restore from, the volume to restore to, and so forth. After these efforts were not successful, I finally tried to re-download OSX and do a clean system restore, it progressed nearly to completion and then aborted the system installation without completing.
Since having this problem I've therefore been unable to use the computer in Mac mode. I had just about concluded that my hard disc must be replaced, when I decided to see if I could restart running Windows (bootcamp), and I was able to do that successfully. The hard disc is therefore not damaged, or at least the partition of the hard disc used by Windows is not damaged.
Is my most likely option to replace the hard disc or is there something I can still do, in order to see if the hard disc can be restored using a saved backup, before I replace it?
I have the further complication of finding that the Apple store will not replace the hard disc for my computer because it is over 5 years old. I can probably locate a shop such as Best Buy locally who can do that, or I can simply purchase an external hard disc and use that as my primary hard disc until I either replace the internal hard disc or simply replace the computer. Since it is a 7 year old iMac, it would not be surprising to have to replace the hard disc after this length of time. I also see that there are instructions available online to explain how to replace the internal hard disc myself, but I'm unsure at this point whether or not I want to do it myself.

Lacking any responses to my initial post above, I will briefly update how I resolved this issue today.
Installed new external hard disc, 1 TB WD My Passport for Mac, and straightforward setup involving first installing current OS X operating system, then system migrator utility to rebuild the same setup as saved in latest Time Machine backup. The whole process was somewhat time consuming due to my internet connection speed and USB data transfer speeds but it went without any issues. The computer now boots up and operates identical in all respects to how it did before the problem occurred.
Regarding the internal HD of my iMac, if I now run Disc Utility to verify the disc, it reports "appears to be OK". However, viewing the disc usage in "About This Mac" window, it displays as entirely empty. Opening it in the finder also shows only a "Apple Hot News.mbox" file and a single .jpeg image, and .nothing else.
Interestingly, the Bootcamp partition of my iMac's internal HD continues to work fine and appears unaffected by the problem. I use bootcamp rarely but still will plan to set up a replacement bootcamp volume on the new hard disc soon, in order to take its place.
That the problem surfaced coincident with the software update may have been nothing more than bad luck? At this point I have no reason to suspect that the softward update had anything to do with the difficulties.

After downloading latest software update i phone 5 sreen images are zoomed in cant correct

after downloading the latest software update on my i phone 5 the screen images appear zoomed in i cant uses the phone

Double-tap the screen with three fingers to reduce the magnification. Go to Settings > General > Accessibility > Zoom and turn this OFF.

Wifi problems after downloading a software update

A while back I installed the ipod 3 update to my ipod touch 2nd generation. After that, wifi for my ipod didn't work in my house anymore and still doesn't. It will show up that I have perfect connection, but none of the pages will load. Internet works fine on my laptop, so I know it's not the router. Although I have been living with this problem for quite some time, I would love to get a solution. Can anybody help?

Have you tried resetting the router by unplugging it for 5 min and then plugging it back in again?
Also, have you seen [troubleshooting network and wifi connections|http://support.apple.com/kb/TS1398]?
Hope that helps.

After downloading latest quicktime update, itunes store will not load

Has anyone had this same problem after downloading latest quicktime update. iTunes store will not load.

This happened to me today as well post installing the latest version of itunes. I did a search on google for the error and came across a recommendation to :
Note: Start Windows in Safe Mode to complete any of the following steps if you're unable to access Windows normally due to the msvcr80.dll error.
If, and only if, you're receiving the msvcr80.dll is missing error when you open Apple iTunes, do the following: (skip this step if your msvcr80.dll error is occurring with a different program)
Uninstall from Windows the following five programs in this order: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, and finally Apple Application Support. If you have iCloud, remove it as well.
Uninstalling these programs in Windows is done from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
Note: Songs and playlists in iTunes will not be removed when you uninstall the iTunes program or any of the other, already-mentioned Apple programs. If you'd still like to back them up, they're usually located in the My Music folder in Windows.
Download the latest version of iTunes from Appleand note the location you're saving it to so you can find it once it's done.
Run the iTunes installation as an administrator. If you're not sure how to do that, see How Do I Open an Elevated Command Prompt? for help. That procedure shows you how to open the Command Prompt program as an administrator, but the steps are essentially the same for anything, including the iTunes installation package you just downloaded.
A general overview of removing and reinstalling iTunes can also be found here on Apple's site but the above procedure seems to work better in this particular situation.

Anyone having problems getting CD covers to print after downloading latest software?

Anyone having problems getting CD covers to print after downloading latest software?

Lacking any responses to my initial post above, I will briefly update how I resolved this issue today.
Installed new external hard disc, 1 TB WD My Passport for Mac, and straightforward setup involving first installing current OS X operating system, then system migrator utility to rebuild the same setup as saved in latest Time Machine backup. The whole process was somewhat time consuming due to my internet connection speed and USB data transfer speeds but it went without any issues. The computer now boots up and operates identical in all respects to how it did before the problem occurred.
Regarding the internal HD of my iMac, if I now run Disc Utility to verify the disc, it reports "appears to be OK". However, viewing the disc usage in "About This Mac" window, it displays as entirely empty. Opening it in the finder also shows only a "Apple Hot News.mbox" file and a single .jpeg image, and .nothing else.
Interestingly, the Bootcamp partition of my iMac's internal HD continues to work fine and appears unaffected by the problem. I use bootcamp rarely but still will plan to set up a replacement bootcamp volume on the new hard disc soon, in order to take its place.
That the problem surfaced coincident with the software update may have been nothing more than bad luck? At this point I have no reason to suspect that the softward update had anything to do with the difficulties.

IPhoto slideshow is very very very slow after the latest software update

As the subject states, iPhoto slideshows are very slow: after clicking on the slideshow-button first nothing happens, after a while the screen goes black (that lasts about a minute or so) and the (finally) the slideshow starts. which is very annoying because it displays no options screen at first as it used to do, it just starts using very annoying standard music... quitting slideshow again to go to the options menu takes ages!! this problem started after the latest software update... way to go Apple...
suggestions anyone?!

EelcoR
Welcome to the Apple Discussions.
Well I haven’t seen this problem.
Start with the troubleshooting basics:
1. Delete the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
2. Repair Permissions using Disk Utility
3. Create a new account (systempreferences -> accounts) and see if the problem is repeated there. If it is, then a re-install of the app might be indicated. If it's not, then it's likely the app is okay and the problem is something in the main account.
Regards
TD

Massive battery drain issues after the latest software update - phone hot

After the latest software update (to the NI2 version) I have massive battery drain issues. The phone also stays hot. Even when I don't actively use the phone it seems to stay "awake" according to the stats. When I disable all data (Wifi and/or 3G/4G) it's perfectly fine. Does anyone else experience the same issues or has recommendations?

Is the device trying to sync all your photos with the cloud?
This is what I would do.
Back up your photos and music onto a personal computer. Copy down important settings like for your email, and contacts you can't risk losing.. even icon placement of important apps. Diagram it out.
Then perform a Factory reset on the device. Alternatively you might find the procedure for wiping the low level cache of the device posted in other posts on the site. That might fix the problem and avoid you losing settings and content on your device.
Extremely bizarre behavior post updates are usually associated with low level cache issues that cause the OS to behave poorly. Some people have reported their phones running hot and that could mean the radio is on constantly attempting to back stuff up to the cloud our restore stuff.
Good luck.

Can't download latest software update on my iPad 2

Can't download latest software update. Settings
Tells me its available but can't download.

What iOS are you currently running?
See
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
Tip - You may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update to iOS 5/6.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

TS3274 My Ipad has a black background now and everything is color faded after the latest software update? I restored and reset the Ipad. How can this be fixed?

My Ipad has a black background now and everything is color faded after the latest software update? I restored and reset the Ipad. How can this be fixed?

How much data is being backed-up from each Mac? (see what's shown for Estimated size of full backup under the exclusions box in Time Machine Prefs > Options).
Is there any other data on your Time Capsule, besides the backups?
Most likely, there just isn't room. Time Machine may be trying to do a very large (or full) backup of one or both Macs, and can't. Since it won't ever delete the most recent backup, there has to be enough room for one full backup plus whatever it's trying to back up now, plus 20% (for workspace).
Also see #C4 in Time Machine - Troubleshooting for more details.

It seems after the latest software update, my iphone 4 has issues with the phone and voicemail locking up as well as opening random apps. Any thoughts?

It seems after the latest software update, my iphone 4 has issues with the phone and voicemail locking up as well as opening random apps. Any thoughts?

Hi clintfromid,
Thanks for using Apple Support Communities. I would recommend closing all your apps and restarting and maybe resetting as good initial troubleshooting steps for this:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
Cheers,
- Ari

Iphone 4 locked after failed latest software update

iphone 4 locked up after a failed latest software update
now it is not showing up or recognized by itunes.
Any suggestions. or is it the crap apple software?
Thanks - robert

As for the problem and help, I just stopped by AT&T and they took care of it.
As for my disparaging remarks, it is the way I feel and felt like voicing it at the moment. As I recall this is still a free country (Obama thankfully has not been able to screw everything up) and I personally have never liked apple products or software. That’s my personal opinion, it is crap. This particular phone is supplied by corporate and I will get a different phone as soon as request is approved. MS software has always been much better than apple products in my experience and at a much better price.
Best Regards,
Robert
(Rush Limbaugh for President)

TS3274 iPad does not start after the latest software update

After downloading the latest software update on 25 April 2014, my iPad does not start. The reset mechanism does not have any effect. I would be thankful for advice.

If the reset doesn't work, force iPad into recovery mode.
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.

Can't download latest software update

When I try to download the latest software updates it keeps saying can't be installed because can't be expanded and must have been corrupted during download, What can i do to fix this

What iOS are you currently running?
See
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
Tip - You may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update to iOS 5/6.x, the next update can be installed via wifi (i.e., not connected to your computer).
 Cheers, Tom

Why do I have to restore my iphone after this latest software update?

I have just synced my iphone 5, and downloaded/updates it to the latest software update which was available, but now it wants me to restore my phone to factory settings???? Why this time, it hasn't ever asked asked me to do this before? Is it safe?

restore to factory settings mean deleting everything you put on the phone making it as it were when it was shipped from the factory

Problem after downloading latest software update

Similar Messages

Maybe you are looking for