Problem after downloading OS 6

I am having a white screen in my iphone 3gs after downloading OS 6 what to do ?? i reseted and restarted my phone
wat should i do ???

hmm have nt triend that thx will reply on wat i get

Similar Messages

  • Has another else had this problem after downloading OS X (10.5.6)?

    I was beginning to think this was a Safari download problem, but now I am wondering if anyone else has had this problem after downloading OS X 10.5.6. I have one web site that I can load, but when i enter my I.D. and then password it quickly kicks me off and an error message comes up saying my internet time has expired and I need to log in again. I have checked with my internet service provider as well as the web site people. No problems there. I can log in using another computer which I have not downloaded the new OS X system. I can also log into the site from the intel side of our iMac. Any suggestions why the Mac side will not load this site fully? I would be very interested in fixing this.
    Thanks.

    Hello,
    Try resetting the password for this particular site using Keychain Access (Applications/Utilities.
    Home Index
    Adding a password to your keychain
    You can add passwords for servers, email accounts, and other password-protected resources to your keychain. The next time you access the server or check your mail you won’t have to type your password.
    To add a password to your keychain:
    Open Keychain Access, located in the Utilites folder in the Applications folder.
    Open Keychain Access
    Select a Keychain from the list.
    Choose File > New Password Item.
    Fill in the information for Keychain Item Name, Account Name, and Password.
    You can select Show Typing to reveal the characters you typed to make sure they are correct.
    To add a password for an application, look for a checkbox in the login dialog or other feature (such as a menu item or preference) that adds your password to a keychain. If you can’t find a way to add a password to your keychain, the application may not support keychains.
    Carolyn

  • TS1398 Did anybody got problem after downloading ios 6 on iPhone 4?

    Did anybody got problem after downloading iOS 6 on iPhone 4??cause mine one got problem......1st,my signal got weak and 2nd my safari browser got problem....slow and unable to connect to network sometime???even my 1st gen iPad much faster.....while open safari browser.....

    My Verizon 16 GB iPhone 4 Camera is fine. It is even located on the lock screen.
    What may have happened is they may have moved your icon to another location. But check the lock screen. There should be a camera icon next to the slide bar. Just press the camera ico and slide it UP

  • I have had nothing but problems after downloading Lion and turning on ICloud. Can anyone tell if I can delete photos from Photostream and if not why not! it is infuriating

    I have had nothing but problems after downloading Lion and turning on ICloud. Can anyone tell if I can delete photos from Photostream and if not why not! it is infuriating

    PhotoStream is purely a conduit for transferring pictures added to or taken on one device onto all the others seamlessly. Photos are held there only for 30 days. There is no way of accessing, viewing or deleting individual photos; you can reset the entire Photostream, erasing everything.
    http://support.apple.com/kb/HT4890

  • IPod Touch playng games problems , after download not start games

    iPod Touch playng games problems , after download not start games

    When touch the game icon just "blink" (tremor)for one momentend not start games, a lot of games,aleator ,never apps sistem to the factory.After restore to the factory seting and redownload is posible to run once or twice corectly and after that the trouble begin again.

  • Had a problem after download updated itune, error 7 (window error 126) cant open itune at all

    Had a problem after download updated itune, it failed as Error code MSVCR80 and then next message is error 7 (window error 126), cant open itune at all

    Had a problem after download updated itune, it failed as Error code MSVCR80 and then next message is error 7 (window error 126), cant open itune at all

  • Sound/Video Problem after Downloading iTunes 10.5

    I recently downloaded the most recent iTunes update, 10.5. After downloading it, I am having problems with the sound and picture of television shows. When I try to watch a tv show, the sound is muffled, and the picture slows or skips constantly. This happens on every tv show I've tried to play, not just one. I haven't noticed any problems with sound from songs though. I had this problem once before after downloading the previous version of iTunes, and completely uninstalled and reinstalled iTunes to solve the issue, and it worked. However, I tried doing it once again this time, and there was no success. I've tried disabling sound enhancements, and that also had no effect. Quicktime is installed and updated as well. I'm running Windows 7. Any help or advice is appeciated.

    I'm not sure I quite understand what you mean. iTunes doesn't save a folder of playlists, but if you mean that the iTunes library is empty, or doesn't contain playlists that it had before the upgrade then either restore your backup or make use of the following...
    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps youshouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    tt2

  • Following your instructions for fixing problems after downloading firefox 4 made it completely unusable, not even able to connect for feedback.

    I was having with internet and web connections just stopping or freezing after downloading firefox4. I tried following your dirrections that said to turn it off then back on. It turned off but would not go back on. I couldn't connect to anything so went back to my old search engine. I couldn;t even send you information concerning the problem until I got your recent email. The dirrections are really hard to follow for people who are not great on computer lingo. Can you write it out step by step?

    Press '''START + R''' in keyboard to open the '''Run''' box(or '''start''' then '''run''') , type in the RUN box '''%APPDATA%''' (or copied in just i wrote, bold text) then click '''OK'''. A Windows Explorer window will appear, in this window, choose '''Mozilla''' then '''Firefox''' then '''Profiles'''. Each folder in the "Profiles" folder (e.g., "xxxxxxxx.default") is a profile on your computer (maybe is one file if you have only one profile).
    see for more info : [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile folder - Firefox ]
    try it, good luck
    thanks again

  • So many problems after downloading verizon internet suite!!

    After downloading the verizon internet suite , i am having some major issues with my computer that i have never had in the 3 years that i have had it. Actually , i have never had problems with my computer or any of the anti spyware and anti virus programs that i have had for it. now that i downloaded the software from verizon, the biggest problem is that my computer will just shut down in the middle of something or shortly after start up. i have also tried doing some custimized scans and it just shut down right in the middle of it. i have an acer inspire with vista and after downloading it , everytime i start up i have a little box in bottom left corner that says eRecovery agent and the only thing u can do is close it. the only thing i know about it , is that it has something to do with acer but i can't find the eRecovery anywhere else on my computer. when i have problems with it shutting down at start up it will continue to do it everytime until i start it up with out the ethernet cable and then i plug it back in. This is so frustrating that i am ready to throw my computer threw verizons main office window. Seriously, this has caused so many problems and i have already unistalled the other program i had previously and now i am stuck. Can someone please give me some advise

    First make sure that there are no other AV programs on your computer. Even inactive ones. If there is another loaded on the computer, even inactive, you will have issues.
    If you do have another on the computer, do a system restore to prior to the VISS install, then remove the old AV and then reinstall the VISS.
    Now even though there are some on this board that are biased against the McAfee, its really an undeserved rep. There are Millions of people that use McAfee (it is the second largest AV software out right now after all) with no issues what so ever.
    Now having said that, I personally prefer AVG myself. But thats mostly because I'm a penny pincher and refuse to pay for something I can get for free. 
    ====================================================================================
    Error exists between keyboard and chair.

  • Problems after download mavericks

    I am able to login after download of Mavericks. The screen the login, I type my password the screen goes white for a split second and the returns to the login screen. HELP!!!

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Why am I having problems after downloading Lion?

    My computer is constantly freezing up and getting the spinning beach ball. Also will not accept my passwords. I never had these problems until downloading Lion.

    Please read this whole message before doing anything.
    Boot in safe mode. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    During startup, you will see "Safe Boot" on the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Safe mode is slower than normal, and some things won’t work at all, possibly including wireless networking.
    Launch some applications and test. Same problems?
    After testing, reboot as usual (i.e., not in safe mode.)

  • Adobe Icon problem after download

    I downloaded Adobe 11.0.02 Have XP SP3  after downloading everthing works accept all icons for adobe files has changed.
    does not show as standard adobe Icon  Icon now shows as square block with blue line a top and three colored dots across the center
    how do you get old adobe icons to show through out computer.

    Maybe this will help-
    http://support.microsoft.com/kb/2396571

  • I've been having problem after downloading latest version of iph ... My work email no longer working on my ph and it keeps saying the imap not responding or that user name not correct ... But all this is correct cause on my Mac computer it's still working

    Having problem to reload my imap gmail mail on my iph after the upgrade.  It first stopped working would not download then I deleted the account and now I can't get the account to back in .  It keeps telling me the username is incorrect and password.  But yet my email is on my Mac pc ...

    Enter the correct login credentials for the account.

  • Problem after downloading 7.6.4

    I downloaded QuickTime 7.6.4 (and iTunes 9), and now I am experiencing several problems.
    When I visit http://www.apple.com/ca/ipodnano/ and try to "watch videos shot on the new iPod nano", a message shows up saying that QuickTime is required, and links to the download page. Re-downloading it (uninstall and reinstall, or repair)does not fix the problem.
    Also, when some sites are visited, a message pops up saying I need a QuickTime plugin. After completing the installation process, it says
    "A newer version of QuickTime is already installed. This installation can not proceed while the newer version of QuickTime is installed.", and closes the installation window.
    I am using Google Chrome, but have tried Safari, and the same problems occur.

    I hope someone DOES figure out how to fix this problem like APPLE coming up with a solution, patch or fix.
    I purchased and registered QT 7 PRO (already had QT 7) but when I open the QT and go to open a file, All I see is the word PRO in white next to most of the icons/links and it won't let me do any thing. All I can pretty much do is just listen to music I purchased or downloaded.
    I also have problems when on other websites, This is all very annoying!
    For example: Every time I try to chat with someone on Facebook, I get a blue shading in the upper left corner of my profile page and then a empty blue box in the bottom left along with a message at the top of my browser (firefox) saying I need to install a missing component. When I click install, it opens a box saying quicktime with a check mark in a tiny box next to it.
    ALSO, Whenever I click on the QT AUDIO tab in preferences I get a 'RUN A DLL AS AN APP has encountered a problem and needs to close" error message. The other tabs work just fine, no problem.

  • Installation problems after downloading BB Desktop Manager

    All worked perfect, until an automatic update from version 5.0. to 5.0.1. messed everything up, perhaps by the user's fault...
    [1] update worked just jfine
    [2] problem started when an message interfered asking for a resource ..8310.msi - file
    [3] I finally decided to uninstall the BB Desktop Software altogether with an uninstaller software [YU]
    [4] I downloaded 500_b028_english.exe
    [5] after unpacking the software with winzip the Windows installer is interrupted
    [6] The Blackberry Desktop Software Installation Wizard tells me: "the wizard was interrupted before Blackberry Desktop Software could be completely installed...Your sysyem has not been modified. To complete installation at another time, please run setup again.
    [7] bad news: this process repeats and interrupts always at the same point in the same manner
    [8] consequently I have NO Blackberry desktop software any more at all running ....
    Please, help is URGEMTLY needed .... Thx in advance, Wolfgang

    Hi and Welcome to the Forums!
    I suggest the following steps (insert plenty of reboots of your PC...not just restarts, but full power down reboots). Also, it is advised that you be logged into the PC on an account with full admin rights. Further, under Vista, use the "Run As Administrator" option for everything.
    1) Remove your device OS update package from your PC (add/remove programs)
    2) Cleanly uninstall the RIM DTM software:
    KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
    3) Get a fresh download of the RIM DTM software:
    https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
    Choose the version that is newest (5.0.1 is current) and (if applicable) compatible with your PIM (if you are synchornizing via USB):
    KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
    4) Download (to your PC) a fresh copy of your device OS package from your carrier:
    http://na.blackberry.com/eng/support/downloads/download_sites.jsp
    5) Install DTM to your PC
    6) Install (also to your PC), the device OS package
    7) Start the organizer configuration over:
    KB17022 How to configure organizer applications for synchronization using BlackBerry Desktop Manager
    Hopefully that will get things going again.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for

  • Does a normal view write to any log i.e archive or undo log

    Hi , can i check if a normal view writes to the archive or undo log ? e.g select a.* , b.* from A , B tks & rdgs

  • 1 Day view - Without Related Agenda in Ical

    Hi, Does anybody have any ideas who to show just 1 day in Lion's Ical without showing the related agenda. The goal is to show a wider calendar as many of the events on the calendar are only 10 minutes long and it gets really crowded. Thanks in advanc

  • Error while loading table from flat file (.csv)

    I have a flat file which i am loading into a Target Table in Oracle Warehouse Builder. It uses SQL Loader Internally to load the data from flat file, I am facing an issue. Please find the following error ( This is an extract from the error log genera

  • Upgrading from ibook g4 to Tiger

    I recently decided to help my girlfriend upgrade her ibook g4's OS to Tiger, since she's running 10.3.9 and can't update to the newest version of iTunes. I made sure her computer met all the necessary technical requirements as per apple's website, th

  • Why is iPhoto importing photos distorted as small strips?

    My iPhoto has started to import my pictures as horizontal small stripes. I am transferring the photos from a camera via a media card and reader. This is the first time this has happened after several months of trouble free use. Just preceeding my mos