Problem after Enterprise Activation

For various reasons, i had to reactivate my 8700 yesterday to connect to the enterprise server, which i had previously been connected to for over 2 years.  Now when i get email off the bb server, they all have alternating, diagonal read and white stripes where there were none before.  This is only on enterprise mails - all other emails are fine, no background.  it kind of reminds me of using stationery in pc based mail programs if that helps picture what i am saying.  i looked all over the device, this board, with no luck so far.  any suggestions?  thanks in advance for any insights on this.

What do you see when you go to:
Options >> Security Options >> General Settings
Message Background Colours
Message Edited by aingaran on 02-23-2009 02:05 PM

Similar Messages

  • Problem after CIN activation

    Hi All,
    I have installed CIN 40A in 4.6C and activated in a client which is exact replica of 000. After activation two transport request were generated. I have transported it into another pre-customized client i.e. 001, but CIN is not working fine and i am facing problems as i descibed next.
    Problem: When  i go to transaction SPRO>Financial Accounting Global Settings>Tax on Sales/Purchases-->Basic Settings in that "settings for Tax on Sales/Purchases in India" is not coming.
    After CIN installation and activation we need to do some other changes in transaction SPRO to reflect these things or not ??
    Please help me in this regard ASAP.
    Thanks
    Sunny

    Dear Sunny,
    These 2 links will help you to solve your issue.
    help.sap.com/bestpractices/BBLibrary/Documentation/J00_Essential_Information_EN_IN.doc
    http://www.uber-goober.com/forums/showthread.php?t=103327
    Regards,
    Rakesh

  • Problem after running Activation-Bypass tool

    I have just purchased a Palm Pre Plus. I installed Java and the latest webOS SDK on my computer.
    I then flashed my Palm with webOS Doctor and ran the Activation -Bypass tool.
    After reboot my screen has "Check SIM-SOS only" written across the top and pictures of how to install a SIM card roll across the screen.
    Would someone be kind enough to let me know how to get back a normal start screen
    Thank you for your assistance
    Len
    Post relates to: Pre Plus p100una (AT&T)

    What is your main goal in doing this task?
    Are you a developer?  Perhaps this question would better be asked in the dev forum at Palm's Developer site.
    You list your main device as a p100una (AT&T) yet now you say you have a different model?  What version of webOS doctor are you looking for?  1.4.5 for AT&T hasn't been released yet...
    BTW, to edit a post, click the "Options" link in the top right corner of the post.  "Edit" will be available there.
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Find My Mac problems after icloud activation

    Has anyone else had the following problem.
    In the icloud system preferences it will not allow me to tick the (find my mac) box.
    It is giving the following message.
    FIND MY MAC REQUIRES A RECOVERY PARTITION.
    Some configurations, such as  software or hardware raid, do not support a recovery partition and can't be used with find my mac.
    Any help would be appreciated.
    Cheers
    Ash

    I created a partition and it seemed to sort it out.

  • Re: Internet Browser doesn't access the Internet after Enterprise Activation

    do you know how to tell if i am using my blackberry unlimited internet? or am using my mobiles net?

    Hi dinodog4
    Go into Options>Advanced Options>Browser and make sure your Default Browser Configuration is set to Internet Browser.  This will ensure you are using your BlackBerry data service.
    Thanks
    -CptS
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Help!! please email setup requesting enterprise activation after factory reset

    after i did a factory reset i notice my email set up is requesting enterprise activation email and password i don't have either so now my email setup can't work unless i do it and my native browser won't connect and blackberry protect won't work. i registered the blackberry thru hosting and i got your blackberry is registered but i can't get the other apps to work since i need the enterprise activation.

    i got the phone from ebay so i don't know if it's on BES and as far as a blackberry data plan i have verizon prepaid and i activated the phone thru them with no problem and i signed up for BIS with no issues but i don't remember the password to get the service books sent to my phone. the phone just stop working a couple of days ago i have had it since october with no issues until now. the first thing i notice was i stopped getting email and it said my service was blocked so i did a battery pull that didn't work. then i did a security swipe and now i can't access the email setup or the browser and it says that i don't have a data plan needed to use it which i don't get since i have had no problems since october. i was told on by someone that maybe i was over my data but i just looked and saw i wasn't and it rolled back since i paid on the 24. this is like the 3rd incident since switching from post paid to prepaid it is making me want to switch carriers

  • DSO activation problem after creating the secondary indexes

    Hi,
        I am facing the problem with DSO activation after creating the secondary indexes.
    •  Compared with Info Cubes there is no functionality available which allows dropping and recreating a secondary index before/after the data activation.
    As a workaround I can write a simple report which drops and creates the indexes on database level.
    By using a process chain, we can simply insert the drop index report before data activation and the create index report after the data activation process.
    Can any body help me step by step procedure or Material to write the programs for delete index and create index reports on DSO object?..
    Thanks in advance for your help.
    Thanks & Regards,
    Bala

    hi,
    in BI if you are using the dso for reporting then you can simply chk the settings of dso for SID generation.
    no need to create the indexes or delete it.
    if the dso is not used for report then no need to use indexes.
    Ramesh

  • HT4623 Hi,        There was ios 4.1 in my iphone3gs.i have tried to update it through itunes but there is a problem.After installation through itunes,there is problem that it is not activating my iphone and shows a message that your iphone could not be ac

    Hi,
        There was ios 4.1 in my iphone3gs.i have tried to update it through itunes but there is a problem.After installation through itunes,there is problem that it is not activating my iphone and shows a message that your iphone could not be activated because the activation server is temporarily unavailable,try connecting your iphone to itunes to activate it,or try again in a couple of minutes.i tried many times but it again shows the same message,
    after installation,when i connect my iphone to itunes it shows a message that we are unable to activate your iphone at this time please try again or contact customer care.please reply me urgently to resolve this problem.

    That is usually a symptom thet the phone was hacked or jailbroken. Was it?

  • Problem after activating the ECC 6.0 DIMP

    I am getting the serious problem after doing the activation of this ECC 6.0 DIMP by installing some package.
    What the problem is that the tables which are having the table class W are giving the problems.
    Suppose whenever you are reterving data from this type of tables it is taking so much of time and finally a runtime error is coming showing TIME OUT.
    Might be after installing that package we have to regenerate the tables. and how to do that i don;t know.
    So all the tables which are having the table class W ,E and S are giving the problems.
    For eg table DD02l this is the table for table fields and when i am making some changes in this table by using access key and after that if i have to make activate
    it , it is going for short dump and similar cases are there for the tables of the condition type.
    Please give me your helpful answers to solve this issue.
    Thanks

    Hi
    From the command prompt following command i am executing
    <b>c:\dump\oracle\NT\IA64>sapserver.cmd</b>
    After executing the command Screen1 appears
    <b><i>Screen1</i></b>
    <b>**********************************************************************************
    Specify the drive letter of the local disk where
    you want to install the oracle software
    Local Disk Drive [C:]:D:
    SID (consists of 3 alphanumeric characters,
    starting with a letter (a...z)):D11
    ***********************************************************************************</b>
    After giving the parameter as shown in Screen1 the Screen2 will be popup and it stay for 2min and then close automatically and screen1 will come to normal prompt
    <i><b>Screen2</b></i>
    <b>***********************************************************************************
    Starting Oracle Universal Installer...
    No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
    Preparing to launch Oracle Universal Installer from C:\DOCUME1\ADMINI1\LOCALS~1\Temp\Orainstall2007-11-30_08-20-49PM. Please wait ...
    *************************************************************************************</b>
    I cant found what is actual problem why OUI is not starting
    Thanks and Regards,
    Vishal Kalekar

  • Problem after 10.6.6 update! MDS running from the start on activity monitor

    Hello,
    I have a iMac late 2009 and yesteday <unfortunately> I did the update 10.6.6! Before everything was working great cause I care the system with clean my iMac and other applications everyday and mostly I use recording programs like Pro Tools. After update the restart came and iMac's CPU was jumping at 20-30% without touching anything! I saw on Activity Monitor and <mds> was running! I want to ask what is that and how I can remove it and not running all the time. I close it from Activity Monitor every time the system starts but I want to remove it and don't see it as it wasn't before! After reading other topics, I did verify and repair permissions from Disk Utility and Mac Osx disc but mds starts when system boot.

    This problem started happening to me on both my iMacs as well. I have a brand new 27" 3.06 Core2Duo which started to experience boot and shutdown problems after running the 10.6.6 update. My 21.5 3.06 Core2Duo (have had for just over a year) is suffering quite a bit more. My 21.5" iMac has Bootcamp installed, as mentioned in this thread and at the following thread: http://discussions.apple.com/thread.jspa?messageID=12968046#12968046
    I had noticed extremely sluggish behavior and many cases of the spinning wheel of lost hope. I run MenuMeters, so noticed a higher than usual CPU utilization - looking into Activity Monitor, mds was taking between 30% and 50% of my CPU.... ordinarily that shouldn't be a problem, but since that is Spotlight's indexer, I imagine there was IO contention. I plan on removing Bootcamp this weekend (don't really use it anymore thanks to Parallels 6).
    Additionally, I have experienced horrible WiFi performance on both iMacs since updating. I have seen a few mentions on the Internet about this, but no real official acknowledgement. My icon in the Menubar indicates that the connection is still solid, however, I'm unable to resolve websites, etc. I assume that it is losing its connection momentarily to my router, and not reresolving with DHCP upon reconnect. This problem seems to be pretty repeatable when I use Fast User Switching... Anyone else having this problem? I have ruled out my router, as my Windows box and Linux laptops have zero issues. I hope Apple is resolving this issue -- making me eat my words when I told my wife that we HAD to go Mac since its so much more reliable!
    - Paul

  • Enterprise activation after wipe out

    Hello,
    I have a problem.
    I had an old BB curve 8900, am I had some problems with it and I decided to buy another one.
    On my old BB 8900I had Enterprise activation account.I received a new password and ALL the things I had on my old phone were synchronized on my new one. AND I don't want that. So I've wipe out my phone. But surprise when I entered my Enterprise activation account all the previous things that I wiped out were on my new wiped out BB curve 8900.
    I don't want that. I want a new fresh BB !!!
    Please help me, how can I wipe out everything, activate this account and have a fresh start.
    PS: I love this function, I love that all my contacts, mails etc were there, but I just want to copy a part of them.
    (I'm doing this because a while ago I've changed the language of the phone and in the upper right corner is a mark with "EN" and I really hate it, and I want it gone, but every time I change the phone, wipe it out, he reappears)...

    Hello nuuvreau, 
    Welcome to the forums. 
    If you are looking to start from scratch on your Enterprise Activation then you will need to talk to your BlackBerry Enterprise Server admin to see if they can disable the message pre population on activation. 
    Have a look at this thread regarding the "En" symbol you are seeing on your BlackBerry smartphone. 
    "EN" icon on top right hand corner of my screen
    -SR
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Enterprise Activation after upgrade to OS 4.5

    If I upgrade to OS 4.5 will I need a new enterprise activation password?
    8800 on At&t
    Thanks,
    John

    If you're connected to your work network when you do the entreprise activation then you'll be ok. You'' have do do it either at work or connected through VPN.
    If you do it while you're not connected to the network then you'll have to go through the enterprise activation again.
    If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
    Remember to resolve your thread by clicking Accepted Solution.

  • Enterprise activation 8900

    I am having trouble activating my (new) Curve 8900 to sync wirelessly with Outlook.
    We have a Blackberry Enterprise Server and I have been issued with the password (a new one).
    I entered my email address and the password, but it give an error message that says 'contact your administrator' which is not exactly intuitive. I also tried it by adding the server details but had the same problem.
    The first time I synched via my laptop and that worked, so when I removed the cable and experienced the above, I though I did something wrong during the setup so I wiped the blackberry and tried again. Same problem as above and I have not connected it to the laptop yet.
    I checked with our company who confirmed that my SIM is activated for data. The collection starts when I put it in an old Blackberry device.
    Any advice will be really welcomed.
    Thanks
    Jacques
    Solved!
    Go to Solution.

    DO you know if you have a regular BlackBerry data plan, or the BES plan? If you have the regular data plan then the enterprise activation won't work. You could also have your IT department issue you a new password. Unless yur company is setup differently, the password usually expire after one use
    If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
    Remember to resolve your thread by clicking Accepted Solution.

  • Enterprise Activation stops @ 98% on Pearl 8110

    Hi all,
    Just been trying to activate a Pearl 8110 after a security wipe. Eveyrthing flys through the setup wiz and then the enterprise activation, execept that when it reaches 98% and is initialising the address book it just hangs there. This is the third time I've tried to activate the handset this week. When it was first issued it activated with no problems.
    Anyone care to share their thoughts on this?
    TIA
    Rob. 

    Hi and Welcome to the Forums!
    I suggest the following steps:
    1) Register HRT
    Homescreen > Options > Advanced Options > Host Routing Table > BBKey (it does not matter which line is current) > Register Now
    2) Resend Service Books
    KB02830 Send the service books for the BlackBerry Internet Service
    KB03577 How to resend service books to BlackBerry smartphones from the BlackBerry Enterprise Server
    3) Batt Pull Reboot
    Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
    If that still fails, then I'd also contact my carrier to ensure that the BB is fully activated on their network and that it has the proper plan from them to enable BES to function through their network.
    Hopefully that will get things going again for you!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Problem with BI activation in Solution Manager

    Hello SAP experts.
    I have problem with BI Content Activation in Solution Manager solman_workcenter - test management - settings - Bi reporting
    The customizing in client 010 is ok. I have BW client 001. RFC connections
    are ok. After activation of BW content in workcenter only new job in sm37
    has been planned but the button Status Report has not appeared. I installed
    newest add-on SAPK-70405INBICONT.
    Detailed description:
    After customizing in:
    SPRO-Basic Data-BW Setup
    and
    SPRO-Scenario-Specific Settings - Test Management - BW-based Reporting.
    The Activation of BW content in transaction solman_workcenter - Test
    Management - Settings - BI Reporting Settings the message appears:
    "Test Workbench Reporting - BI Content not active", after pressing save:"Settings of Test Workbench Reporting saved"
    and
    "Activation of BI Content for Test Workbench Reporting started".
    In test evaluation the button Status report doesnt show. After repeated
    activation appears the same message as in beginning: Test Workbench
    Reporting - BI Content not active.
    Thank you

    Hi Marian,
    Could you please provide me with details on how to setup test workbench reporting. I have a BW system external to Solution Manager. I have setup the RFC conncections and all is okay. I have also setup the source system in BW and installed the web templates. However, when activating the content via solman_workcenter - test management - settings, I get the following error:
    Content Activation Log
    Log for Setup ID 20100819135323
    20100819 135323[ERROR ]: Current Status: ERROR
    20100819 135323[INFO ]: Job CCMS_BI_SETUP successfully scheduled
    20100819 135323[ERROR ]: Incorrect system setting: standard transport is active
    20100819 135323[ERROR ]: Change system settings or set user parameters RSOISCONTENTSYSTEM and RSOSTANDARDCTOACTIVE
    20100819 135323[ERROR ]: Prerequisites check failed
    20100819 135323[ERROR ]: Jobname/count: CCMS_BI_SETUP 13532300
    I am sure there is something wrong in my setup but I cannot figure out what it is. A step by step help on how to do it will be greatly appreciated.
    Regards,
    Rue.

Maybe you are looking for

  • Recording sound directly from a DVD into your computer

    Can you record sound directly into your computer from a DVD playing on your computer?

  • Debugging core files with dbx

    Here are a few questions one of our developers asked me to post: There are some things I don't understand about these core files. (I get this dbx message examining the core file: dbx: internal warning: writable memory segment 0xfe750000[188416] of si

  • Microsoft SQL Server

    Hello, and thanks for having a look at this question. I am developing a dynamic website which will eventually be hosted on a customer's intranet. They have informed me that they can only provide a Microsoft SQL Server 2005, IIS 6, Microsoft Server 20

  • Mail body invisible

    I've been using Mail for the last 4 months now and since recently the body of some emails (not all) are invisible to me in the preview as well as the full view. I connect to an exchange 2007 server and from time to time I get a message with an invisi

  • After updating to Maverick, iMovie doesn't appear

    Well my issue is that after updating the OS to Maverick, iMovie completely disappeared from the Applications, and from the dock it appears a white/grey question mark. I never delete iMovie, and iMovie came with my MAcbookPro since I bought it. What h