Problem after importing

Hi,
I have a pre defined html help file for my project done by
someone else.
Now i have to edit the help file, so i have created a new
project and tried to import the html files from the old help file
which i had. Import was successfull. but i was not able to edit the
contents placed in "Drop Down Text editor" field it has been
encrypted. but the all the datas are present while viewing the
file.
Pls tell me how can i edit the "Drop Down Text editor" text
after importing the file.
Thanks,
Raja

Welcome to the forum.
What is a pre-defined help file? Do you simply mean someone
else created the project? You also say you you imported the files
but it's not clear why. Maybe that does not matter, I mention it in
case the next bit is not the problem as then I will need to know
more.
It should be as simple as double clicking the drop-down
hotspot. Does nothing happen if you do that? The text should be
above the ordinary text when you look at the HTML.

Similar Messages

Avitek Sample Application - problems after imported to Eclipse

I downloaded "Avitek™ Medical Records Sample Application" and started a domain successfuly with this aplication. Then I imported its to my Eclipse Juno with the interest to debug this sample application. I included every lib are need. Now I am getting the error "Default target install does not exist in this project" in every build.xml on the target "<project name=".
Other error I got is "The type javax.jms.Message cannot be resolved. It is indirectly referenced from required .class files" in the PatientNotifierBroker project. I looked for javax.jms_1.1.2.jar and I had already added this library.
Have someone face both problems after imported this sample?

11g by default is case sensitive username/password.
You can disable that with setting parameter SEC_CASE_SENSITIVE_LOGON to false.
SQL> SHOW PARAMETER SEC_CASE_SENSITIVE_LOGON
SQL> ALTER SYSTEM SET SEC_CASE_SENSITIVE_LOGON = FALSE;

"Messages" problem after importing .xsd file as external definition

Hello,
I received an .xsd file from a customer and need to import it as an "External Definition" in order to create the "Message Interface". The structure of the xsd looks like this:
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:px="http://www.opentrans.org/XMLSchema/1.0" targetNamespace="http://www.opentrans.org/XMLSchema/1.0" elementFormDefault="qualified">
<xsd:element name="ORDER">
</xsd:element>
<xsd:element name="ADDRESS">
</xsd:element>
<xsd:element name="ARTICLE_ID">
</xsd:element>
</xsd:schema>
After importing and looking at the tab "Messages" I get numerous entries, for each <xsd:element> I get one message! But I basically only need one "Message" that holds my complete xsd-file.
I tried inserting <xsd:element name="COMPLETEORDER"> right after the <xsd:schema>-Tag but that didn't work either. Somehow I need to sum up all the <xsd:elements>.
Does anyone have an idea? Thank you very much!
Peter

Hello Prateek, Hello everyone,
I now know what the problem is. I downloaded XMLspy and checked on the structure:
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:px="http://www.opentrans.org/XMLSchema/1.0" targetNamespace="http://www.opentrans.org/XMLSchema/1.0" elementFormDefault="qualified">
<xsd:element name="ORDER">
</xsd:element>
<xsd:element name="ADDRESS">
</xsd:element>
<xsd:element name="ARTICLE_ID">
</xsd:element>
<xsd:simpleType name="dtBOOLEAN">
</xsd:simpleType>
<xsd:simpleType name="dtCOUNTRIES">
</xsd:simpleType>
<xsd:element name="SUPPLIER_AID">
</xsd:element>
<xsd:simpleType name="typeSUPPLIER_AID">
</xsd:simpleType>
</xsd:schema>
Between the long list of <xsd:element> tags there are some simpleTypes on the same
level. Now if I insert
<xsd:element name="COMPLETEORDER">
<xsd:complexType>
<xsd:sequence>
on top, the <xsd:sequence> would be on the same level as the simpleTypes - which is not valid!
But can I just move all the simpleTypes, e.g. into an <xsd:element>??
That would be changing the customer's structure which I think is not a good thing!?
Thank you again for your help! I really appreciate it!
Best regards,
Peter

Universe access problem after importing from R2 to R3.1

Hi all!
We have a problem with universes in 3.1: even with administrator user it keeps showing FRM 00008 error message (You are not authorised to use this document. The universe could not be found in the Central Management Server...) after importing successfully any universe or trying to open any universe locally.
All of the universes were imported using the Import Wizard. The CMS server have been restarted and is running, the CMS ports are visible, universe, connection and application access rights are full control (for the administrator user).
Any idea would be welcome on what else should be checked or set.
Thanks and best regards,
László

Thanks for the tip, but it didn't help. I double-checked object right for administrator, and where it wasn't set as full control, I changed it to full control (universe, applications - DeskI and Designer, and the relevant connection).
And the administrator user is member of only two groups: Administrators and Everyone. (Everyone has no access on these objects, because every user in our BO enterprise is a member of a special group, so there's no need to grant rights to Everyone).
Any other idea?

Problem after importing - now EVERYTHING slow!

I recently made my first iMovie and burned to DVD with no problems. It was great! I am now trying to import video for a new project but it is not so smooth.
It seems to import OK, but when the letterboxing gets almost through it seems to stall. I end up having to quit and trash the project to start again but then my computer runs extremely slow for a very long time then seems to eventually come back to normal.
Here are some issues:
-I still have the old project on my hard drive, so I know it is taking a lot of space. But it was not slowing anything before starting a new project.
-the clip on which the letterboxing seems to stall is a long one. Could this be a problem?
-I've tried a few times to bring this movie in, each time trying smaller chunks so that it does not take too much space but it does not change anything.
-Why, even after trashing the new project, is my computer so slow? It takes several minutes perform any task and sometimes just goes to a blue screen.
I am using iMovie HD 5 and I have the version of the iMAC prior to the built-in iSight and INTEL processors.
Sorry this is long-winded and thanks for any help/advice!!!

Welcome to the forum.
What is a pre-defined help file? Do you simply mean someone
else created the project? You also say you you imported the files
but it's not clear why. Maybe that does not matter, I mention it in
case the next bit is not the problem as then I will need to know
more.
It should be as simple as double clicking the drop-down
hotspot. Does nothing happen if you do that? The text should be
above the ordinary text when you look at the HTML.

Problem after importing iPhoto library - Syncing iPhone/iPad: wrong dates

Hi everyone,
I have a problem, which I cannot seem to find a solution to:
I have imported my iPhoto library into Aperture without any hassle. The problem now is:
When I sync my iPhone/iPad within iTunes, and I click "sync with Aperture"(instead of iPhoto) under "Photos", then "select only the projects of the last 3 months", I always wind up with ALL my Photos (20.000 +) that I have imported with Aperture. Not just the last 30+.
The individual photo's meta information in Aperture is however correct: i.e. a project containing pictures from 2006 still shows the pictures being from 2006. So they shouldn't show up under the photo sync within iTunes when I click "last 3 months", right?
What am I doing wrong? Does Aperture set the date to all the imported projects to the same current date they were imported on? Is there any way to correct this, or sync only the photos of the last 3 months?
Otherwise I will have to go back to iPhoto...
Thank you!

again the same problem, i emptied my trash and again resync after uncheck the photo sync option all the pics were gone, there wasnt any cache in pictures folder, i selected the photo to be sync arround 4573 and again its updating only 405 and i dont see any cache in pictures folder, i dont know may be in lion its saving cache somewhere else, im unable to find it and unable to do it right way. i searched in spotlight for ipod photo cache nothing showed up.
Helpless

Problem after importing partitions

Dear all,
DB : 10.2.0.4
Solaris 5.10
We use to import partitions regularly from our production db to test db for testing purposes. but, when I did the same this time, m getting slowness in the queries which are accessing the newly created partitions. I found the below from the trace file of the session
WAIT #25: nam='db file sequential read' ela= 22 file#=19 block#=2808324 blocks=1 obj#=518727 tim=26162705919866
WAIT #25: nam='db file sequential read' ela= 20 file#=19 block#=2808325 blocks=1 obj#=518727 tim=26162705919967
WAIT #25: nam='db file sequential read' ela= 25 file#=19 block#=2808326 blocks=1 obj#=518727 tim=26162705922054
WAIT #25: nam='db file sequential read' ela= 222 file#=19 block#=2808327 blocks=1 obj#=518727 tim=26162705922357
WAIT #25: nam='db file sequential read' ela= 22 file#=19 block#=2808328 blocks=1 obj#=518727 tim=26162705922464
WAIT #25: nam='db file sequential read' ela= 22 file#=19 block#=2808329 blocks=1 obj#=518727 tim=26162705922568
WAIT #25: nam='db file sequential read' ela= 22 file#=19 block#=2808330 blocks=1 obj#=518727 tim=26162705922680
WAIT #25: nam='db file sequential read' ela= 24 file#=19 block#=2808331 blocks=1 obj#=518727 tim=26162705922798
WAIT #25: nam='db file sequential read' ela= 23 file#=19 block#=2808332 blocks=1 obj#=518727 tim=26162705922903object with object_id 518727 is the newly imported partition.
Please advise ?
Kai

Hi,
If you have index on object_id, then i am assuming it is doing Index Range Scan.
With Index Range Scan, I see no problem with the wait event you have provided. It could be just that you have slow IO, but this should impact the entire database and not only to this partition.
If there is no index on object_id, or it is not doing Index Range Scan, then I suppose there is a reason for this query going slow.
Regards
Anurag Tibrewal.

Problem after importing bookmarks from chrome

My Mac is in German because I live in Berlin. This means that here I have to translate the messages from Safari into English, but it's fairly straightforward. My German is at native speaker level.
Problem is...
When I tried to import the bookmarks and history from Chrome, the progam hung up and I had to "immediately end" it. Then I tried again, this time only importing the bookmarks. It worked, but the result is that, although I have my bookmarks, Safari is not allowing me to delete or modify anything. Each time I try it gives me the message that I "have to accept or delete" the data that I've received from Chrome in order to proceed. But, whether I click on "accept" or "delete", nothing happens. In other words, the data is neither "accepted" nor "deleted", and I can't do any deleting or modifying of bookmarks without bringing up this same message, over and over.
So I can neither go back to the previous state by "clearing" Safari, reversing the process, nor can I go forward. All the bookmarks are as it were "frozen" in the positions that they had when I first imported them, and there is seemingly nothing I can do about it.
I would love to be able to delete Safari and download it again, but this doesn't seem to be possible. I also don't even know if this would alter the settings.

I think in this case you need a addon:
*[https://addons.mozilla.org/en-US/firefox/addon/bookmark-deduplicator/?src=search Bookmark Duplicator]
*[https://addons.mozilla.org/en-US/firefox/addon/bookmark-duplicate-cleaner/?src=search Bookmark Duplicate Cleaner ]
*[https://addons.mozilla.org/en-US/firefox/search/?q=bookmarks+duplicated&appver=28.0&platform=windows More Results]

Problems after import a project

Hi experts,
I copied a project file from workspace ,then import to another PC with NWDS.
I can build the project, and no errors. But there is a error "Could not get name for DC project" when I deploy the project.
And the deploy is failed .
Please give some advice to cover the problem.
BR,
Jianguo Chen

HI
1) Unzip the DC And go the dcdef file in component name\_comp\.dcdef
In the .dcdef file You can see the component name and component type in the corresponding tab
For EX
<?xml version="1.0" encoding="UTF-8"?>
<development-component
           xmlns="http://xml.sap.com/2002/11/DevelopmentComponent"
           xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
           xsi:schemaLocation="http://xml.sap.com/2002/11/DevelopmentComponent dcdef.xsd"
           version="1.0.2"
           xmlns:IDX="urn:sap.com:DevelopmentComponent:1.0">
     <name><b>component1</b></name>
     <vendor>sap.com</vendor>
     <caption>Result_component</caption>
     <component-type>
          <vendor>sap.com</vendor>
          <type><b>Web Dynpro</b></type>
     </component-type>
Create a component with same name and type
Go to the Root folder where the DC is stored
Root folder is   rootfolder \.dtc\LocalDevelopment\DCs\sap.com\componentname\_comp
In NWDS Go towindows> perference >Java Development Infrastructure>Development Configuration pool , there you can see the root folder path
2) Open the comp folder of the newly created dc in the rootfolder \.dtc\LocalDevelopment\DCs\sap.com\componentname\comp and replace it by _comp folder of the extracted file
3) Rebulid the DC and Deploy
hope this helps,
Regards,
Arun

Problem after importing mail to Mail 2.1.3

Hi,
Imported mail from another G4 and all email within the Sent Items folder is displaying as from and date received instead of to and date sent. Anybody any ideas on how I can fix this? It's driving me potty!

Try Control-clicking on the information bar and selecting To and Date Sent, and deselecting From and Date Received.
Mulder

Autentication problem after importing users in osx.5 server

Hi All, I was able to import users to OSX.5.8 server using passenger from macinmind.com but my users could not authenticate. When I create one user at a time the users are able to authenticate. Help i am pulling my hair out.

Rather than importing in Server.app you could try using Workgroup Manager.

Problem with getting order correct after importing a cd.

Has anyone had any problems after importing a cd in to their itunes with the order of the songs not appearing correctly. Even after I double checked to make sure everything was matched up perfectly with the spelling, the tracks appear in the wrong order still. Cany anyone help me out???
Message was edited by: mikebreeze116

Try clicking on one of the column headings to sort the playlist. I'm not in front of my Mac right now, don't recall which column provided the correct sort information.
http://docs.info.apple.com/article.html?path=iTunesMac/7.3/en/560x.html

Blurry pictures after import

Hi
My aperture library have more than 15.000 images. From this on , I started to have a problem after import more images. Some of them appear blurry after import ( the metada still the same ).
I create another library , in another place and doesn't work either .
Thanks
Macario

Hi ,
Exactly ,is like the same blurry while Aperture build the preview , but they persist blurry after that, in some images.I tried to adding the same images to iPhoto and I didn't get any problem.
Them I imported from iPhoto to Aperture, and again, I got the same blurry result.
Thanks.
Macario

Scope ONE searchs fails after imports

I have a problem after import a very big amount of data. The import process (with ldapmodify) finish properly and I can retrieve all the data I imported with ldapsearch easily using a scope SUB and a filter. But if I tried to get the data using a the scope ONE it fails. Actually, it does not fail; I do not get any error. In the logs there is no information, I have re-create all the indexes, stopped and restarted the server but I did not hot any results. I am sure the problem is in the server side because I used some different clients and with all of them I get the same results ... event the Console is not able to show the data.
The version I have installed is iPlanet 5.1 SP1.
Any idea will be appreciated.
Thank you in advance
Jorge Ortiz Claver

I am experiencing exactly the same problem right now.
I am using iDS 5.0
I added a few indexes, enabled retro-changelog and ran into "retro changelog won't stop trimming" bug...
And right now performing a ldapsearch -s one will return nothing (and no errors). Consequence : can't browse anymore with de concole.
Regards
Laurent

Problem on CLOB datatype after import

I got problem and call to Oracle support and they use DUL for extract data from datafile to dump file and I import everything is done and no error but when I check in CLOB datatype that have space(blank character) separate each character see below
Original
Oracle
After Import
O R A C L E
So the application cannot execute those data.
Anyone have solution how to fix this problem?
Thanks,
Taohiko

if you use a direct insert you are restricted to 4000 characters.
You can put your value in a varchar2 variable and that allows you to insert up to 32767 characters.
declare
my_clob_variable := rpad('x','X',25000);
begin
insert into my_table(my_clob_column)
values(my_clob_variable);
end;

Problem after importing

Similar Messages

Maybe you are looking for