Problem AFTER installation of MiniSAP 4.6D
Hi SAP Gurus!
I bought the book "ABAP Objects" by Keller/Krueger and it came with 2 CDs for install MiniSAP 4.6D. I successfully installed it. But when I click "Start SAP MBS" opens a DOS window with the following information:
C:MBS>runmbs
C:MBS>set DBMS_TYPE=mss
C:MBS>set DIR_LIBRARY=.
C:MBS>set MSSQL_DBNAME=MBS
C:MBS>rem del pxastat
C:MBS>start /B msg_server.exe pf=MBS_D00.pfl
C:MBS>disp+work.exe break pf=MBS_D00.pfl
dp Ctrl-C enabled
rslgwr1(21): Searching for overlap point in pre-existing SysLog file...
MSG_SERVER died => main: MsSInit
Sat Jan 01 22:38:29 2005
SemSpinning: 2277 usec for 89793 loops -> 39 loops per usec
rslgwr1(21): Searching for overlap point in pre-existing SysLog file...
DISPATCHER died => DpSapEnvInit: DpCommInit
after that: NOTHING. SAPLogon can´t connect. I checked my hosts file and it's OK, checked my services file and it's OK.
I am working with Win2K Server Service Pack 3, installed MiniSAP 4.6D and SAPLogon 46D.
I hope you can help me.
Thank you in advance.
I had the same problem but when i looked a the install instructions says it needed service pack 4
Similar Messages
-
Hi,
There was ios 4.1 in my iphone3gs.i have tried to update it through itunes but there is a problem.After installation through itunes,there is problem that it is not activating my iphone and shows a message that your iphone could not be activated because the activation server is temporarily unavailable,try connecting your iphone to itunes to activate it,or try again in a couple of minutes.i tried many times but it again shows the same message,
after installation,when i connect my iphone to itunes it shows a message that we are unable to activate your iphone at this time please try again or contact customer care.please reply me urgently to resolve this problem.That is usually a symptom thet the phone was hacked or jailbroken. Was it?
-
Problem after installation Project Server 2013 CU September 9, 2014
Dear All,
I have some problems after installation
Project Server 2013 CU September 9, 2014 (Hotfix 2883072) on 3 level farm
Before installing CU, I have installed
SP1 for Project Server 2013, installation and configuration was successful.
Then I have installed CU and I have not get any errors during installation process. Then I have restarted servers and in SharePoint health analyzer got an error about patch/installation status
on WFE server.
I checked in Windows installed updates and hotfix is installed. I checked in SharePoint Update and Upgrade history and there were no errors during installation. But when I checked in Manage
Patch Status list I found an information:
Language Pack for SharePoint and Project Server 2013 - Russian
Microsoft Project Server Russian Language Pack 15.0.4420.1017 Installed
Hotfix for Microsoft Project Server 2013 (KB2883072) 64-Bit Edition
15.0.4649.1001 Missing/Required
Microsoft Project Server 2013
Microsoft Project Server English Language Pack 15.0.4571.1502 Installed
Hotfix for Microsoft Project Server 2013 (KB2883072) 64-Bit Edition
15.0.4649.1001 Missing/Required
Service Pack 1 for Microsoft Project Server 2013 (KB2880553) 64-Bit Edition
15.0.4571.1502 Installed
Microsoft Project Server Web Front End Server
15.0.4571.1502 Installed
Hotfix for Microsoft Project Server 2013 (KB2883072) 64-Bit Edition
15.0.4649.1001 Missing/Required
Service Pack 1 for Microsoft Project Server 2013 (KB2880553) 64-Bit Edition
15.0.4571.1502 Installed
If I run installation again I get message that nothing will be updated - no update needed.
Please help, how I can install missed packages?The problem was solved !
I solve it using two ways:
1. I have installed the hotfix for Project Server - Hotfix for Project Server 2013 October 14, 2014 KB 2889959 (Projectserverwfe-x-none.msp, Projectservermui-Language-Code.msp)
2. using command
Psconfig -cmd upgrade -inplace b2b -force -cmd applicationcontent -install -cmd installfeatures -cmd installcheck -noinstallcheck
After two actions I was able to run SharePoint Configuration Wizard and upgrade database. Configuration completed successful. -
Problems after installation with disp+work.exe
Hey guys,
i tried to find a solution, but didn't found one....after installation i had to find sapmmc. There was a error message after installation; after some adjustments in the service-file of windows now the message-server runs; but the disp+work still not....find the log attached:
Regards
Christian
trc file: "dev_disp", trc level: 1, release: "700"
sysno 00
sid NSP
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 95
intno 20050900
make: multithreaded, ASCII, optimized
pid 5276
Fri Feb 01 15:35:19 2008
kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
length of sys_adm_ext is 360 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (00 5276) [dpxxdisp.c 1239]
shared lib "dw_xml.dll" version 95 successfully loaded
shared lib "dw_xtc.dll" version 95 successfully loaded
shared lib "dw_stl.dll" version 95 successfully loaded
shared lib "dw_gui.dll" version 95 successfully loaded
shared lib "dw_mdm.dll" version 95 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Fri Feb 01 15:35:24 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5355]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >christiank_NSP_00 <
DpShMCreate: sizeof(wp_adm) 6328 (904)
DpShMCreate: sizeof(tm_adm) 3605136 (17936)
DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
DpShMCreate: sizeof(comm_adm) 528048 (1048)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm) 0 (96)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1280)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 06330040, size: 4205552)
DpShMCreate: allocated sys_adm at 06330040
DpShMCreate: allocated wp_adm at 06331A28
DpShMCreate: allocated tm_adm_list at 063332E0
DpShMCreate: allocated tm_adm at 06333310
DpShMCreate: allocated wp_ca_adm at 066A35A0
DpShMCreate: allocated appc_ca_adm at 066A3A50
DpShMCreate: allocated comm_adm at 066A3F00
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 06724DB0
DpShMCreate: allocated gw_adm at 06724DF0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 06724E20
DpShMCreate: allocated wall_adm at 06724E28
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation view
<EsNT> Memory Reset disabled as NT default
<ES> 127 blocks reserved for free list.
ES initialized.
rdisp/http_min_wait_dia_wp : 1 -> 1
Fri Feb 01 15:35:29 2008
ERROR => MsINiRead: NiBufReceive failed (NIETIMEOUT) [msxxi.c 2515]
ERROR => MsIAttachEx:MsINiRead (rc=NIETIMEOUT) [msxxi.c 762]
***LOG Q0L=> DpLoopInit, nomscon () [dpxxdisp.c 1708]
CCMS: alert/MONI_SEGM_SIZE = 0 monitoring and alerting switched off.
ERROR => DpRGetLogin: Data for alien client [dpxxdisp.c 11251]
Connect request from wrong client at address 10.10.0.10(christiank)
ERROR => DpRGetLogin: Data for alien client [dpxxdisp.c 11251]
Connect request from wrong client at address 127.0.0.1(christiank.hidomain)
Fri Feb 01 15:36:14 2008
ERROR => MsINiRead: NiBufReceive failed (NIETIMEOUT) [msxxi.c 2515]
ERROR => MsIAttachEx:MsINiRead (rc=NIETIMEOUT) [msxxi.c 762]
ERROR => W0 (pid 5280) died [dpxxdisp.c 14318]
ERROR => W1 (pid 4088) died [dpxxdisp.c 14318]
ERROR => W2 (pid 5020) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9f --> 0x9e
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => W3 (pid 4644) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9e --> 0x9c
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => W4 (pid 3080) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x9c --> 0x98
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => W5 (pid 5752) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x98 --> 0x90
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
ERROR => W6 (pid 6040) died [dpxxdisp.c 14318]
my types changed after wp death/restart 0x90 --> 0x80
ERROR => MsIModTypes: not_attached [msxxi.c 1834]
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
NiWait: sleep (10000ms) ...
NiISelect: timeout 10000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Feb 01 15:36:24 2008
NiISelect: TIMEOUT occured (10000ms)
dump system status
Workprocess Table (long) Fri Feb 01 14:36:24 2008
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action Table
0 DIA 5280 Ended no 1 0 0
1 DIA 4088 Ended no 1 0 0
2 DIA 5020 Ended no 1 0 0
3 UPD 4644 Ended no 1 0 0
4 ENQ 3080 Ended no 1 0 0
5 BTC 5752 Ended no 1 0 0
6 SPO 6040 Ended no 1 0 0
Dispatcher Queue Statistics Fri Feb 01 14:36:24 2008
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
4
2000
5
5
--------++++--
+
DIA
3
3
2000
3
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 7
wake_evt_udp_now 0
wake events total 7, udp 2 ( 28%), shm 5 ( 71%)
since last update total 7, udp 2 ( 28%), shm 5 ( 71%)
Dump of tm_adm structure: Fri Feb 01 14:36:24 2008
=========================
Term uid man user term lastop mod wp ta a/i (modes)
Workprocess Comm. Area Blocks Fri Feb 01 14:36:24 2008
=============================
Slots: 20, Used: 0, Max: 0
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
NiWait: sleep (5000ms) ...
NiISelect: timeout 5000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Feb 01 15:36:29 2008
NiISelect: TIMEOUT occured (5000ms)
DpHalt: shutdown server >christiank_NSP_00 < (normal)
DpJ2eeDisableRestart
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes
Stop gateway
killing process (3876) (SOFT_KILL)
Stop icman
killing process (3444) (SOFT_KILL)
Terminate gui connections
wait for end of work processes
wait for end of gateway
[DpProcDied] Process lives (PID:3876 HANDLE:1556)
waiting for termination of gateway ...
NiWait: sleep (1000ms) ...
NiISelect: timeout 1000ms
NiISelect: maximum fd=1593
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Fri Feb 01 15:36:30 2008
NiISelect: TIMEOUT occured (1000ms)
[DpProcDied] Process died (PID:3876 HANDLE:1556)
wait for end of icman
[DpProcDied] Process died (PID:3444 HANDLE:1572)
not attached to the message server
cleanup EM
EsCleanup ....
EmCleanup() -> 0
Es2Cleanup: Cleanup ES2
***LOG Q05=> DpHalt, DPStop ( 5276) [dpxxdisp.c 10333]
Good Bye .....
Edited by: C. Koch on Feb 1, 2008 3:35 PMDuring BW system copy, NW04S.
We do have simalr error message loosing our time to bring up the system:
[disp_dev]
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
Fri May 2 19:35:54 2008
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0088.qqq.nxst) took 6 se
conds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust t
he DNS settings [dpxxtool2.c 5371]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
Fri May 2 19:35:55 2008
WLM Tag 'BD2/DSP' successfully set for this process
rdisp/http_min_wait_dia_wp : 1 -> 1
Fri May 2 19:36:00 2008
ERROR => MsINiRead: NiBufReceive failed (NIETIMEOUT) [msxxi.c 2515]
ERROR => MsIAttachEx:MsINiRead (rc=NIETIMEOUT) [msxxi.c 762]
***LOG Q0L=> DpLoopInit, nomscon () [dpxxdisp.c 1716]
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
[sapinst_dev.log]
TRACE 2008-05-02 23:20:44.132 [iaxxgenimp.cpp:752]
CGuiEngineImp::showMessageBox
<html> <head> </head> <body> <p> An error occurred while processing service SAP NetWeaver 7.0 Support Release 3 > Softwar
e Life-Cycle Options > System Copy > Oracle > Target System Installation > Central System > Based on AS ABAP and AS Java
> Central System( Last error reported by the step :<html> <head> </head> <body> An exception occurred while connecting to
the message server instance BD2/DVEBMGS00 on host nvdbw40, port 3900.<br>DIAGNOSIS: The original exception was: wapsmod.
ms.MsAttachFailed:
Connect to message server (nvdbw40/3900) failed: NIETIMEOUT..<br>SOLUTION: Make sure that the message server is started.
</body></html>). You may now </p> <ul> <li> choose <i>Retry</i> to repeat the current step. </li> <li> choose <i>View Log
</i> to get more information about the error. </li> <li> stop the task and continue with it later. </li> </ul> <p> Log fi
les are written to /tmp/sapinst_instdir/NW04S/LM/COPY/ORA/SYSTEM/CENTRAL/AS/. </p> </body></html>
TRACE 2008-05-02 23:20:44.132 [iaxxgenimp.cpp:1255]
CGuiEngineImp::acceptAnswerForBlockingRequest
Waiting for an answer from GUI
INFO 2008-05-02 23:54:49.854 [sixxcstepexecute.cpp:1004]
An error occured and the user decide to stop.\n Current step "|NW_Doublestack_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_Syst
em|ind|ind|ind|ind|2|0|NW_CI_Instance|ind|ind|ind|ind|11|0|NW_CI_Instance_Start|ind|ind|ind|ind|1|0|start".
[dev_w0]
Fri May 2 19:35:56 2008
Bind service sapgw00 (socket) to port 3300
GwPrintMyHostAddr: my host addresses are :
1 : [165.140.111.55] nvdbw40 (HOSTNAME)
2 : [127.0.0.1] loopback (LOCALHOST)
3 : [165.140.114.55] bnvdbw40 (NILIST)
Full qualified hostname = nvdbw40
DpSysAdmExtCreate: ABAP is active
DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
Fri May 2 19:41:30 2008
M *** ERROR => ThCheckReqInfo: message send/receive failed [thxxhead.c 17386]
M
- Need a help
Thank you -
Problems after installation 16.0.3 update for Windows
I propose here to report problems appeared after installation 16.0.3 Illustrator update for Windows.
As for me:
Don’t display Stray and Center Points in Outline mode;
Eyedropper+Shift works incorrectly;
Graphic Style Libraries -> Additive make disappeared Fill.Hi K,
Thank you for you reply and sorry if the information was a bit too truncated. well here goes.
I am using a MacBook Pro (3.1) 17 inch, 2.4GHz processor, 2 GB ram. I edit video using Final Cut Studio 2. i am having a problem with Final Cut Pro 6 after downloading the latest update (6.0.3). Before I downloaded the update I used to be able to export my movies on the Quicktime option of FCP (not compressor or Quicktime conversion) giving me the option to view the the movie while in an FCP Project. The viewer used to scale the exported video to 16.9 (720 by 576 anamorphic), it no longer does this, instead playing it in 4.3. I have tried exporting both from the time line and the canvas but the viewer will only preview in 4.3. As I want to see it in 16.9 because that is what the movie was made in, captured and edited in. The original settings have not changed but there seems to be this annoying problem.
I hope that is enough detail
Ivan -
NWDS Startup problem after installation
Hi!
After installation when trying to start NWDS 7.0.06, the following error occurs:
!SESSION Aug 10, 2006 10:12:56.300 -
java.version=1.5.0_08
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=de_AT
Command-line arguments: -os win32 -ws win32 -arch x86 -feature com.sap.java.ide C:\WINDOWS\system32\javaw.exe
-Xmx512m
-Xms128m
-XX:PermSize=32m
-XX:MaxPermSize=128m
-DallUserDir='C:\Dokumente und Einstellungen\All Users\Anwendungsdaten'
-cp C:\Programme\SAP\IDE\IDE70\eclipse\SapStartup.jar com.sap.ide.eclipse.startup.Main
-os win32
-ws win32
-arch x86
-feature com.sap.java.ide
-showsplash C:\Programme\SAP\IDE\IDE70\eclipse\SapIde.exe -showsplash 600 -data C:\Dokumente und Einstellungen\aur\Documents\SAP\workspace -install file:C:/Programme/SAP/IDE/IDE70/eclipse/
!ENTRY Startup 1 0 Aug 10, 2006 10:12:56.300
!MESSAGE Sap NetWeaver Developer Studio - Unknown Sap Internal Installation
!SESSION -
!ENTRY org.eclipse.core.launcher 4 0 Aug 10, 2006 10:12:56.988
!MESSAGE Exception launching the Eclipse Platform:
!STACK
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at com.sap.ide.eclipse.startup.Main.basicRun(Main.java:291)
at com.sap.ide.eclipse.startup.Main.run(Main.java:789)
at com.sap.ide.eclipse.startup.Main.main(Main.java:607)
Caused by: java.lang.reflect.InvocationTargetException
at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:861)
at org.eclipse.core.boot.BootLoader.run(BootLoader.java:461)
... 7 more
Caused by: java.lang.UnsatisfiedLinkError: Native Library C:\Programme\SAP\IDE\IDE70\eclipse\plugins\org.eclipse.swt.win32_2.1.2\os\win32\x86\swt-win32-2135.dll already loaded in another classloader
at java.lang.ClassLoader.loadLibrary0(Unknown Source)
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at org.eclipse.swt.internal.Library.loadLibrary(Library.java:108)
at org.eclipse.swt.internal.win32.OS.<clinit>(OS.java:46)
at org.eclipse.swt.widgets.Display.internal_new_GC(Display.java:1291)
at org.eclipse.swt.graphics.Device.init(Device.java:547)
at org.eclipse.swt.widgets.Display.init(Display.java:1316)
at org.eclipse.swt.graphics.Device.<init>(Device.java:96)
at org.eclipse.swt.widgets.Display.<init>(Display.java:291)
at org.eclipse.swt.widgets.Display.<init>(Display.java:287)
at org.eclipse.ui.internal.Workbench.run(Workbench.java:1361)
at com.tssap.util.startup.WBLauncher.run(WBLauncher.java:79)
at org.eclipse.core.internal.boot.InternalBootLoader.run(InternalBootLoader.java:858)
... 8 more
Any ideas to solve this problem?
Thanks and regards,
FranzMaybe the workspace is corrupted..Try starting with a new workspace. In a short cut define the new workspace
C:\Programme\SAP\IDE\IDE70\eclipse\SapIde.exe -showsplash 600 -data C:\temp
Otherwise try installing again.
Regards,
Arun -
Boot Camp 2.1 problems after installation, how to fix?
Downloaded and installed Boot Camp 2.1 to my WinXP SP2 partition. After installation and rebooting, problems began to occur:
1. iSight no longer working, hardware wizard keeps popping up. Reinstalling driver for iSight, no help. Finally had to disable.
2. Keyboard message popping up during bootup of XP stating that it isn't installed properly. However, keyboards - both external and internal seem to be working OK.
3. Blue Tooth error message popping up when bringing MacBook out of Standby (from WinXP). Message states Blue Tooth not installed properly. After MacBook wakes up, Blue Tooth seems to be OK.
Tried reinstalling Boot Camp 2.1 again but no joy. Same errors.
Finally had to remove 2.1 and revert back to 2.0. After reverting back to 2.0 I had to run system restore from XP to get everything back to normal. Everything OK now running Boot Camp 2.0.
How do I resolve the above errors and what does 2.1 suppose to fix - if anything?
Regards.Thank goodness you got back to normal. I have the Blue Screen of Death and spontaneous shutdown after installing 2.1. I uninstalled 2.1 and tried to reinstall 2.0 using the Leopard DVD and cannot get the installer to work. I get an error code 2753 and the installer shuts down.
Now when I try to open the 2.1 installer nothing happens. I think a reinstall of Windows XP is in my future. Thanks Apple. -
Problems after installation on Linux AS 4
Hello all,
after installation on Linux AS 4 I saw several problems
1) Oracle Applications ( Forms doesn't allow conections
I try to connect to apps via http://ibm.domain.com:8000/dev60cgi/f60cgi using several user/password such as apps/apps, sysadmin/sysadmin but I received the following error.
APP-FDN-01542: This Applications Server is not authorized to access this database
2) When I connect to E-Business Suite home page via http://ibm.domain.com:8000/ so many times I can't see the web page complete, missing most of the links and folder. It is strange because I could create a new user and grant some roles to it.
As you can see I'm quite new in this arena.
Thank you all
AlfonsoI think it shouldn't be the problem because as I explained in my previous message, I was able to see the page correctly, even more; I was able to create a new user and grant ABM roles to it.
What are relly missing in the page are links to the AMB forms.
What I also saw in the log file, was the attempt to connect to the server by an unknown ip client. I 'm scared thinking someone could have been trying to damage my installation.
Please help!!!
Regards
Alfonso -
Probleme after installation XML-SQL Utility
Hallo
After installation XML-SQL Utility, after execution the xdkload i have executed the test example but the result is not good and the result of execution is:
Rem Use these to test the results..
SQL> select dbms_xmlquery.getxml('select * from dual', 2) from dual;
DBMS_XMLQUERY.GETXML('SELECT*FROMDUAL',2)
<?xml version = '1.0'?>
<ERROR>oracle.xml.sql.OracleXMLSQLException: java.lang.NullPointerException</ERR
OR>
SQL> Rem
SQL>
SQL> exit;
Please if need a help to continue. If you have given me a solution.
Best Regard
Hatemgo thru technet.oracle.com/tech/xml for the installation info.
-
ITunes encountered a problem after installation
Hello,
Until 2 days ago, iTunes was working fine. Now when clicking on the iTunes icons, a screen comes up saying "iTunes has encounted a problem and needs to close." And gives the option to send an error report to Microsoft.
We have tried un-installing iTunes & re-installing a few times. Un-installed QuickTime & Reinstalled it, etc. Is there anything else we can try?
Thank you!If you are unable to uninstall Quicktime from within add remove programs, and receive an error that state something to the effect...
Quicktime cannot be uninstalled because C:\<some directory path>\uninstall.log cannot be found
Just download and install the StandAlone Installer or locate the C:\Windows\system32\quicktime folder and delete it....only do this as a very last resort, but after a reboot, you should be able to use add remove programs -
Problems after installation: Freezing, long waiting, no turning back.
So, I thought give Windows 7 a shot on my iMac 20" running Snow Leopard. Installation went well, it is running without any problems. After the installation, some very strange problems occur:
1. When I boot into OSX, I have to wait for at least 5 minutes or longer, before I can login to my useraccount. I see the users on my screen, but when I click one of them nothing happens. After the 5 minutes, it's like the system awakes en everything I typed in the meantime appears.
2. It takes 2 or 3 tries sometimes before i really load into OSX. Most of the time my system freezes while loading the icons in the top, or loading the software in the dock. After 2 or 3 tries I usally make it through, and I can use OSX. While freezing I only see a colored cursor.
3. While using OSX, at unexpected moments the system can freeze, showing me just a colored cursor. Probally the same cause as problem 2. It's usally Finder or Safari that causes the system to freeze. Most of the time I have to reboot, but sometimes it works to put the iMac into sleep mode.
I thought this wouldn't be the trouble, so I decided to uninstall the Bootcamp partition. But ofcourse this won't work either. When I start the Bootcamp-assistent, it states I don't have the latest firmware, although I absolutely have according to the website.
Edit: Of course, I tried to check permissions and check the disk with the installation CD and Disk Utility. I cannot check the Bootcamp partition, that one is grey, and according to Disk Utility, my Macintosh HD partition seems to be fine.
Is there a solution for this?
Message was edited by: SV88Well, I removed the Bootcamp partition, and resized the disk to it's original format. Nothing seems to change, all problems keep occuring. The frustrating is, I can't backup through TimeMachine, it keeps crashing (colored cursor, or just a plain freeze)!
-
Strange problem after installation of bootcamp with windows 7 on Imac i5 27
After installed Windows 7 (Single partitions Leopard Snow and Windows works very fine) i have a bootloader problem with the option key at startup of the machine.
If i hold option for a little time i don't see any icon, only a gray display. Only if I hold down the option key for about two minutes icons appears correctly.
The problem not exist if i install rEFi, bootloader, it start very fast and all work fine. Any ideas?Hi,
This is Oracle Database Express Edition (XE) forum.
If you like use APEX listener and have problem with that here is link to correct forum.
ORDS, SODA & JSON in the Database
If you like use EPG see configuration steps from APEX install instructions
http://docs.oracle.com/cd/E23903_01/doc/doc.41/e21673/otn_install.htm#CBHBCBBJ
Regards,
Jari
My Blog: http://dbswh.webhop.net/dbswh/f?p=BLOG:HOME:0
Twitter: http://www.twitter.com/jariolai -
Java.lang.NullPointerException problem after installation
Dear all,
after i install the EP6.0 SP9 on AIX 5.3 ORACLE 9.2 ,when i want to create role ,i hit the IE error message like "operation aborted" .in the log viewer i found the error
Time : 16:26:50:119
Category : /System/Server
Date : 06/22/2005
Message : [com.sapportals.portal.pcd.admintools.roleeditor.RoleEditorCompContextHandler] getPriority() failed
[EXCEPTION]
java.lang.NullPointerException
at com.sapportals.portal.pcd.admintools.roleeditor.RoleEditorJndi.getPriority(RoleEditorJndi.java:1622)
at com.sapportals.portal.pcd.admintools.roleeditor.RoleEditorJsTree.createTreeNode(RoleEditorJsTree.java:784)
at com.sapportals.portal.pcd.admintools.roleeditor.RoleEditorJsTree.getChildTreeNodes(RoleEditorJsTree.java:646)
at com.sapportals.portal.pcd.admintools.roleeditor.RoleEditorJsTree.createJScriptTree(RoleEditorJsTree.java:96)
at com.sapportals.portal.pcd.admintools.roleeditor.RoleEditorJsTree.createJScriptTree(RoleEditorJsTree.java:106)
at com.sapportals.portal.pcd.admintools.roleeditor.RoleEditorJsTree.buildRoleEditorJsTree(RoleEditorJsTree.java:56)
at com.sapportals.portal.pcd.admintools.roleeditor.misc.RoleEditorPage2.createContentStudioPage2(RoleEditorPage2.java:1501)
at com.sapportals.portal.pcd.admintools.roleeditor.misc.RoleEditorPage2.createPage2(RoleEditorPage2.java:1425)
at com.sapportals.portal.pcd.admintools.roleeditor.RoleEditorMain.doContent(RoleEditorMain.java:129)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:646)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:232)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
at java.security.AccessController.doPrivileged1(Native Method)
it seems to be java problem ,anybody could give some suggestion?thanksHi,
I have similar problem.
If you have solved this issue please let me know how.
Thanks
Arun -
HELP!!! "Restart" problem after installation of OS Mountain Lion
Dear Apple People,
I have upgraded my Macbook Pro 13 (bought last year) from Leopard to Mountain Lion. After some days my computer stopped to start normally and restarts every minute. Please see attached the photos. I have searched other topics and internet, tried to repair disks and other tools, but nothing helped...
I would (and of course other many people who faced this problem) aprreaciate if you could give us detailed instructions how to fix this problem. It is not fair that we have installed new software and even paid for it and now cannot use it...
I am looking forward for your prompt action!
Thank you.I found it! - under Users/....
So now i will back up all these files.
What should I do then?
Follow the "step 3. If you have a backup, press Command and R keys in boot, open Disk Utility, erase the disk and install OS X" whic you have suggested earlier?
Do i need to have cd or flash drive to install OSX or is it enough to have internet connection? -
Problem after installation Mountain Lion
I bought a macbook pro that came with Lion retina, and brought iphoto and garageband preloaded.
I downloaded the installer mountain lion and did a clean install. (deleting and creating a new partition).
The problem is that I do not see iphoto or garageband. how I can fix?
as I can go back to the installation of lion if the recovery HD by default, is erased?.
thanksI found it! - under Users/....
So now i will back up all these files.
What should I do then?
Follow the "step 3. If you have a backup, press Command and R keys in boot, open Disk Utility, erase the disk and install OS X" whic you have suggested earlier?
Do i need to have cd or flash drive to install OSX or is it enough to have internet connection?
Maybe you are looking for
-
Since approx 7am GMT I've been getting "Error in sieve filter" message with each incoming mail, worse though, since about 12 noon I cannot recieve or send mail to or from my iCloud account apart from I've been getting emails from Apple (ie I've just
-
Tax on intercompany transactions
Hi gurus, when we do the intercompany transactions for a free of charge invoices, SAP still incorporate Tax on the invoice. AP didn't want to see the tax on these free of charge invoices. we are using Taxware as our third party Tax software, any hel
-
updated MBP to 10.8.2, and ISO6 on iPad3, safari on both device started having problems behind proxy server. 1st, 10.8.2 desnot remember proxy user name and password anymore. every time i put in my username and password, it wil be gone(got erased its
-
I have new iMac with Lion installed; can I get a free upgrade for my MacBook Pro?
Hello I recently bought a 27" iMac with Lion installed. Should I be able to download the upgrade for my MacBook Pro without paying. If so what should I do. If I go to the App Store I'll end up paying £20.99 Any help gratefully received margaret
-
Will i still receive the 100$ to spend in the apple store if i am a student from K-12?
PLease help me, Im about to buy a MBP but i am unsure if i will receive the promotion.