Problem after installing new AMD FX-4170 processor

Hello,
i just installed AMD FX-4170 on my MSI 890GXM-G65 mainboard. Then, when i start my computer, everything seems to be fine, all fans are working, those 4 proc. power LEDs are shining, everything is powered. But i get no signal to my monitor, cant get to BIOS, keyboard not working, nothing. I tried two different graphic cards, even that integrated one (not sure if it would work, when disabled in BIOS) nothing changed.
Same problem is when i place back the old Phenom processor. Black screen, from time to time No signal message on my monitor.
I have the lates BIOS 1.d.
Any suggestion?
Or am I screwed and have to buy new maiboard, because this one is somehow damaged?

clear CMOS helped. Computer is not very stable, second SSD disk (F: )(not the one with system) keeps disconnecting after some period of time, but at least i see what is happening it does not even show System reserved area (E: )of the system disk (C: ), that is normally visible...
RAID is set to AHCI, so it is ok.. the trick must be somewhere else.. i will check BIOS one more...

Similar Messages

HP Pavilion dv7t-6c00 CTO Blue screen at start after installing new AMD Mobility Radeon Driver

hi, after installing the new driver from AMD (14.4) windows shows blue screen at startup, there seems to be comflict between this and the Intel HD 3000 driver provided on the official website of HP, I try to install the driver from Intel and windows working mode only basic colors so I went back to install the old intel driver, both drivers can be updated in the official website to support the latest games and programs?

Hi RodMoltedo,
Welcome to the HP Support Forums!
I see you are having some issues with the updates to your AMD and Intel Graphics cards on your HP Pavilion dv7t-6c00 CTO Entertainment Notebook PC. Could you please tell me what operating system you are running on your computer and where you went to get these updates?
Please let me know and I would be happy to help you with this.
Thank and have a nice day!
I worked on behalf of HP.

Startup problems after instaling new graphics card drivers

PC: HP p6520 f with a 400 watt power supply
video card: AMD Radeon 6570 (MD1GD3)
After getting the 400 watt power supply, I was able to uninstall the intergrated graphics card's drivers, but I can't succsesfully startup after installing drivers for the new card without a system restore, which of course gets rid of the new drivers.
I've tried newer drivers, but those don't work either.
Any suggestions?

Hello Sev_07. I understand you're unable to install your video card drivers.
Are you receiving an error on boot?
Are you experiencing any issues with other pieces of hardware?
Have you tried running HP Support Assistant and Windows Update to ensure all of the software and drivers are completely up to date?
It may also be helpful for you to provide your product number so I can look at your computer's specifications. This document can show you where this is located.
I hope you have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Permissions problems after installing new hard drive

I backed up my old hard drive with SuperDuper!, then installed a new hard drive. When I tried to install my backup on the new hard drive with Disk Utility, it would work fine and then hang. It wouldn't finish, even overnight. So I installed a clean copy of leopard on the new hard drive, and then used Migration Assistant to move everything over from my backup. Worked great, until I actually tried to use the computer. Tons of permissions issues, mail and address book wouldn't run, Skype won't run even after installing an upgraded version, etc. What's weird, is my main account is an administrator account, but logging on as root and trying to remove admin permissions from my main account, the checkbox is greyed out! I also don't have a UID 501 on the system. I'm 502, and my wife's account is 503. I can't fix permissions from the finder, and in certain cases can't get them changed in terminal logged in as root. I don't know how to get my data from my old hard drive (which is running 10.5.1) to my new hard drive (also 10.5.1) Please help me! Thanks.

Hey Shawn,
Have you looked at the permissions with "Get Info"? Are they listed as belonging to "unkown user"?
First of all, see the Apple doc <href="http://docs.info.apple.com/article.html?artnum=306876">Administator user changed to standard.
After you clear that up, you'll probably have to remove the "unkown user" and add your user as the owner of all your folders. During that process, finder will probably crash. At that point, try running <a href="http://discussions.apple.com/thread.jspa?messageID=5670342#5670342>this terminal command described in "mlaster's" second posting.
Good luck!
CMF

Exchange 2007 - Outlook Anywhere problems after installing new SSL cert

*** Original thread posted on wrong forum ***
Hi all,
Exchange 2007 environment (2x CAS, ISA2006). Not much familiar with Exchange.
Problem: 20-odd machines off the domain use Outlook Anywhere (XP with Outlook 2010). AUthentication pop-up and not able to connect.
Company has recently changed its name and we have to renewed the SSL cert. Previous SSL cert. was issued to: webmail.oldcompname.co.uk (several SANs on that cert., including internal server names).
Applied for a new UCC SSL cert issued to: newcompanyname.com (also includes webmail.newcompanyname.com ; autodiscover.newcompanyname.com + old SANs).
The setting on those machines point the proxy to the following:
Https://webmail.oldcompname.co.uk (which is fine since it is in the cert and can be accessed)
Only connect to proxy servers that have this principal name in their cert.:
msstd:webmail.oldcompname.co.uk (I believe this is the problem since the new UCC SSL cert. was issued to newcompanyname.com).
Browsing technet + internet it seems that I need to look into OutlookProvider EXPR.
When I run Get-OutlookProvider everything is blank (I believe I should be concerned to EXPR only for Outlook Anywhere).
I am thinking of running: Set-OutlookProvider -Identity EXPR -CertPrincipalName msstd:newcomanyname.com
My only concern is whether this might break something else in the Exchange environment, especially as we have 100+ users on smartphones connecting via SSL on webmail.oldcompname.co.uk
Is it save to run this command? Do I need to re-start IIS? Do I need to look into any settings on ISA2006?
Comments/help are much appreciated.
Regards

Hi,
According to the description, I found that we re-new a SSL certificate.
"I am thinking of running: Set-OutlookProvider -Identity EXPR -CertPrincipalName msstd:newcomanyname.com"
Just do it. Then remove the old certificate on ISA server and install a new one.
Found a similar thread for your reference:
Renewal of SSL certificate in exchange 2007 with ISA 2006
http://social.technet.microsoft.com/Forums/exchange/en-US/25770038-8491-470a-92fa-8ae50674b7a6/renewal-of-ssl-certificate-in-exchange-2007-with-isa-2006
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

Problem after installing new software on torch 9800

Hi,
after installing the new software version 6.0 Bundle 3159 my blackberry tells me that:
uncaughtexceptation:
Application
net_rim_bb_nabsync_114(261) is not responding;
process terminated
but also there is an e-mail that doesn't work when I wan´t to open it fist of all it doesn't open then suddenly the screen turns white and it tells me something and below it there is a button to reset. If I click on the button the phone restarts

Friend should do an update again your team blackberry.
Remember to make a backup with Desktop Manager and the BlackBerry protect
Having BBSack to apply wipe, factory reset wipe more, following which you do a software update via Loader.
Software For BlackBerry® Torch™ 9800 smartphone
BlackBerry Handheld Software v6.0.0.3170 (Multilanguage)
Package Version: 6.0.0.3170
Consisting of:
Applications: 6.0.0.756
Software Platform: 6.6.0.252
File name: 9800M_PBr6.0.0_rel3170_PL6.6.0.252_A6.0.0.756_Vodafone_Spain.exe
File size: 171.22MB
https://swdownloads.blackberry.com/Downloads/entry.do?code=15D4E891D784977CACBFCBB00C48F133
Regards.
Kudos ** Do not forget to give those people who help and advise you regarding your questions ** Can
Accept as Solution to ** Comments **
@gutijose14
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I

HDD problem after installing new SSD

i bought a Kingstone SSD 60GB, and procced to a clean installation in my HP DV7-1020us laptop wich i love. All nice and good... i got out the HDD, install SSD in previously used HDD slot, install windows 7 on SSD partition, put the HDD in second hard drive bay that was it.
The problem is... after couples shuts down of my laptop (still working good), one time when i started, my laptop spent like 10-15 mins trying to start up the windows , ( i could hear my old HDD working hard) and after that i wanted to reach my HDD but i couldnt... i double click on the partition i want to open and my HDD starts working hard hard and in the end it says that i need to format it so i can acces it. My hdd haves 3 partitions... i runned disk checks and repairs and still doing the same. I finally formated all of it... all of my HDD partitions including the Recovery partition. My HDD works fine until i shut down my laptop for the first time after formating, then another 10-15 mins to start up and shut down the windows. Also if i connect my hdd via USB everything is fine ( if i previously format the HDD and connect it via USB). But if i move it back into my laptop in my sata slot things goes bad again. Also if i wait 10 mins at start up, get the hdd out and connect it via usb it still runs very ver very slow, and one partition asks me for formating. So i'm thinking that my second sata slot connection does something bad to my hdd.
I'm thinking that my second sata slot haves some problems... what should i do? I dont like my HDD working on my USB, it's a laptop, everything has to be integrated.
Oh and if i move my ssd from first sata slot to my second one, it says "please insert bootable device...."
Thank you, if u need more information please ask me

Hi mykey651,
Thank you for your query, I will do my utmost to assist you.
I grasp you have installed a SSD drive as the main drive and the original drive as a secondary. All works well until you reboot and then it is unable to locate the SSD.
Here is a link to HP Notebook Hard Drives & Solid State Drives Identifying, Preventing, Diagnosing and Recovering from...
If that has not helped, I suggest you go out to the bios and restore the defaults. This will reset the system and make it scan for installed hardware. This should help it to find the new SSD as the boot drive.
Here are two more documents that may be of help.
About Solid State Hard Drives
How to Install an SSD (Solid State Drive
Hope this helps and have a great weekend.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Problems after installing new memory stick

The problem that I have is this:
I have an iMac PPC G5 2.1 GHz 20" w/ built-in iSight which was purchased in April 2006. Last week I purchased a certified 1 GB stick of RAM from OWC. I installed the RAM per the instructions given in the owner's manual. I restarted my computer and the RAM was not recognized in "About This Mac", nor was it listed in the Apple System Profiler. I thought that maybe I hadn't seated the RAM properly, so I removed the stick and repeated the installation process. I called and spoke to a tech at OWC who walked me through resetting the PRAM and NVRAM. This was not successful in forcing the RAM to be recognized. I have returned the RAM to OWC and am expecting a replacement from them within the next week or two.
(As a side note, after each repeat of the process, the computer would not shutdown as quickly as it had been since I purchased it. I waited for one minute and then forced a shutdown via hoding the power button in. I made two attempts at a clean install of the OS. Both times there was an error at the very beginning of the install process that would not allow it to continue and required a restart). I am highly concerned about the shutdown issue and the inability to re-install the OS.
Has anybody had or heard of an issue like the one that I have just decribed?
iMac G5 20" iSight Mac OS X (10.4.7) w/ Bluetooth keyboard & mouse

I completed the Disk Warrior rebuild but it did not solve my problem. It has even added a new problem. Now the "Starting Mac OS X..." progress bar that runs prior to the appearance of the desktop image is still on my screen after the desktop image is loaded. It is starting to look like I need a fresh install of the OS, but I can't do that either. Somebody please help!!! I am glad that I bought the AppleCare protection.
I am going to give the "fsck" thing a try before I give up.
iMac G5 2.1 GHz 20" iSight Mac OS X (10.4.7) w/ Bluetooth keyboard & mouse
Message was edited by: CT Mac Addict

Problems after installing new version o iphone 3gs

I installed this evening the new version of my iphone 3gs and since then I cannot use my iphone nor reinitialise it beause it asks me to connect to itunes.When i connect it to the computer it say there is no pilot and doesnt manage to install a new pilot I telecharged the last version of itunes and reinstallated it, try again to reinstall the pilot but impossible to connect and I can't use my iphone
Help me please

A warm welcome Sabina!
i wonder if the issue is the new battery (can that cause a slow down
and malfunction of this sort).
Not too likely at all.
or if my HD is the problem.
Very likely, I would expect all Laptop HDs 4 or more years old to be failing by now.
i just read somewhere that whenever we do the updates we're supposed to do the permissions and i never knew to do that -- so i haven't ever done it. could that be the problem.
That and Verifying or Repairing the HD are sort of like looking both ways before you cross the street, neither may be necessary to cross the street, but it certainly can prevent problems during the crossing!
should i do a clean install of the system software and start from scratch.
I really think the Internal HD is on it's way out, but if you have a good/complete backup, actually a bootable clone on an external Firewire Drive is preferable... Best way to get an exact bootable copy of your old drive to the new one is with Carbon Copy Cloner...
http://www.bombich.com/software/ccc.html
thoughts would be appreciated. i don't have the money to take it anywhere to be fixed or to buy new -- so any help is greatly appreciated.
Without Money to replace the HD, you may be stuck booting off an external HD

Another volume control problem after installing new software

I'm having a different volume control problem than the previous poster.
When I turn my ipod touch on, the volume control stays on the screen. I can't do anything to get rid of it. When I go into settings/sounds, the control goes away on the screen, but it will not let me turn the volume up. When I try to listen to music through my headphones, I can turn the volume up but then it automatically turns itself down. The same thing happens when I try to turn the volume up from the side control. It worked fine this morning before I installed the new software and now it's acting buggy. Any ideas on how to fix this?

Friend should do an update again your team blackberry.
Remember to make a backup with Desktop Manager and the BlackBerry protect
Having BBSack to apply wipe, factory reset wipe more, following which you do a software update via Loader.
Software For BlackBerry® Torch™ 9800 smartphone
BlackBerry Handheld Software v6.0.0.3170 (Multilanguage)
Package Version: 6.0.0.3170
Consisting of:
Applications: 6.0.0.756
Software Platform: 6.6.0.252
File name: 9800M_PBr6.0.0_rel3170_PL6.6.0.252_A6.0.0.756_Vodafone_Spain.exe
File size: 171.22MB
https://swdownloads.blackberry.com/Downloads/entry.do?code=15D4E891D784977CACBFCBB00C48F133
Regards.
Kudos ** Do not forget to give those people who help and advise you regarding your questions ** Can
Accept as Solution to ** Comments **
@gutijose14
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I

Problem after installing new ram

Just installed 1 MB of new ram. Everything appears to work with one very annoying problem that never existed prior to installation of ram. The problem is that the window moves slightly with any movement of the mouse. Not a great deal but enough to hide the menu at top of screen. I ran an Apple Hardware Test and all hardware passed. I changed the mouse but no cure. This happens with nothing running so I assume it is not software. It doesn't appear to affect the operation but it tends to make one sea sick with the up and down and side to side motion anytime the mouse is moved.
Shure would appreciate any help with this.
Doug

Open the Universal Access pane of System Preferences and turn off the Zoom option in the Seeing tab.
(27764)

Problems after installing new HDD into Satellite M70-151

I have a Satellite M70-151 the hard drive gave up and was unreadable, prior to this I was using with my Desktop via a router it worked great. I had no option but to install a new Hard Drive now in the System Manager I get Yellow question marks against:
Other Devices:
? Mass Storage Controller
? Network Controller
? PCI Modem
? Video Controller (VGA compatable)
I have searched and searched but cannot find any drivers for these 4 things
I have sound but only faint, I no longer have a wireless capability Yes I have tried to install the correct (as advised from Toshiba) Lan Driver [LInk to driver|http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?ID=58122&OSID=10&drive rLanguage=42&selectedLanguage=13&driverCountry=41& selectedCountry=8]
When I try to install it says "The device may not be present or could have been ejected/unplugged from the system.
Insert or Reinsert now"
I know I am being thick but I was under the impression that the Lan was built into the Notebook? :_|
I would be sincerely grateful for any advice from my Peers. :)
Stuart

Hello Stuart
To be honest I really do not know what you do exactly. After HDD exchange, for me, the first step you should do is to make clean OS using delivered recovery media. It is fastest and best way to have fresh installed OS.
So, if you do not have this recovery media you must use original Microsoft installations CD. all drivers, tools and utilities for this notebook model you can find and download from Toshiba support page under http://eu.computers.toshiba-europe.com > Support & Downloads.
Before you start drivers installation, please download and check Installations Instructions document. Please follow the installations order. It is very important and following this installations order you will be able to install all Toshiba stuff properly.

Problems after installing new PSU

I have a very unstable system after replacing the PSU. Her is a list of issues encountered.
I had worked on my PC today then left it running as usual while I was away. Came back and my PC was "sleeping" reawakened and it fired up except the screen remained black. Tried several times to restart...same effect. Went into bios and couldn't see anything untoward but did change my start sequence thinking this may have an effect. Finally got my pc to light up the screen only to find the following messages. The previous performance overclocking failed?
Keep your current bios settings y or n. Now I don't overclock as far as I know?? I went back to bios and changed a few minor settings. Tried to restart and got as far as Windows is starting which promptly froze. Tried restarting again and got to a black screen wiyh flashing cursor in top left. Went back to bios and set failsafe default settings. This time my pc fired up. What is going on, I am really getting anxious as replacing my PSU was (I thought) going to bring stability back to my PC. Why does my PC fail to wake up? I have bios set on S3, and enabled the relevant resume choices. I need help....thanx

It worked !!! I thought i had already reseted the bios but seems like using the menu didnt do it. The computer is now working as b4 thx god it isnt some damage on my hardware !!! Should I now access BIOS and save to default again ? I set the time manually in windows dont know if that is the best way to go around it anyways I am going to search about it. Btw the PSU is XFX the GPU is from MSI. How should i proceed now, should I keep with the RMA and make sure its not faulty or the problems that arose with it are all explained by problems in the BIOS and there is no reason to be afraid of the new PSU? Thx alot again !!!

Wifi connection problem after installing new HDD

I have just replaced the hdd in my pavilion dv6-3032tx and for some reason I am now having trouble connecting to my home wifi internet connection. Unless i have the laptop right next to the router the computer is unable to connect. Any suggestions?

Hi mykey651,
Thank you for your query, I will do my utmost to assist you.
I grasp you have installed a SSD drive as the main drive and the original drive as a secondary. All works well until you reboot and then it is unable to locate the SSD.
Here is a link to HP Notebook Hard Drives & Solid State Drives Identifying, Preventing, Diagnosing and Recovering from...
If that has not helped, I suggest you go out to the bios and restore the defaults. This will reset the system and make it scan for installed hardware. This should help it to find the new SSD as the boot drive.
Here are two more documents that may be of help.
About Solid State Hard Drives
How to Install an SSD (Solid State Drive
Hope this helps and have a great weekend.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Problems after installing new security update-help?

Hi, how can I verify what I recently downloaded on my mac. I installed the security update from software update, and i want to make sure I downloaded something intended for my machine. I have doubts as my machine runs like **** now. Apps take forever to open, screensaver comes on when its set to never, printer won't work, etc. Also, if it was just a bad download, can I just try loading it again over the last one? First, I'd love to see what i downloaded. Thanks. In a bind. Never had this happen before. Running 10.3.9
m

Hi Matthew,
First of all, you should be able to check in your HD/Library/Receipts folder to see what has been installed by looking for the .pkg of it.
re: "I installed the security update from software update, and i want to make sure I downloaded something intended for my machine"
You should not be offered updates that are not intended for your System through Software Update. Software Update, as far as I know, reads the .pkg files in your Receipts folder and will offer what you need from that. (I believe that is correct....perhaps someone will correct me if I'm wrong)
Did you Repair Permissions from Disk Utility before and after the update?
If not I would try running Repair Permissions (HD/Applications/Utilities/Disk Utility/Repair Permissions).
I've found that with Security Updates that it is very important to Repair Permissions before and after updating.
littleshoulders [:-)

Problem after installing new AMD FX-4170 processor

Similar Messages

Maybe you are looking for