Problem After N73 restarts
Hi,
I am facing a problem with the N73, when i restart my mobile, it starts up properly but latter it immediately starts Installing something which i dont know what it is, and it puts a error, can not complete installation.
please help,
Regards,
Ritesh bhatia
31-Aug-2008 11:59 AM
riteshdb wrote:
adamf,
Thanks for your quick responce, but in N73 there is no DELETE option available in Application manager.
Please help me with this
Regards,
Ritesh
Hi,
You said that you don't have a "Delete" option,but
do you have a "Remove" option, if you do, this option
will delete the file that is causing the problem.
In my N81-3, I have a "Remove" option.
Good luck.
Fattan
Similar Messages
-
My problem after N73 New firmware
Dear All
V 4.0727.2.2.1
Hello
i have a problem after i pdate my firmware for Nokia N73
the problem is: before When I started to make a call the counter appear on the screen and when the other side open the line the counter start the count the time. This is useful to see the call time during the call process
But after the new firmware I did not find this service and I can not fix it.
How I can fix it?
Also, how I can back to the old firmware?
Is there a program to do the same service?That's quite odd, just repeat the update process
Update Service (SUS)
http://www.sonymobile.com/gb/tools/update-service/
http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
PC Companion (PCC)
Bridge (for Mac)
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994) -
Problems after N73 firmware update
I've had an N73 phone for some time and just recently updated the firmware, which has disabled all my games that are on the phone!! They are still on the memory card, but they will not open. ( Some games were formatted for other nokia models that had worked prior to update, and a few were actually for the correct model, but none work now- Help!
Hi, have you enabled Speed Dial after the reset?
The default setting after a reset is to have speed dial disabled.
If I remember correctly the setting is in "Settings" - "Phone" - "Call" - set "Speed dialling" to On. -
DS6.3 problems after enable restart/shutdown on reboot
Hello,
I have DS 6.3 running on Solaris 10 x86. After issuing the following command to enable graceful shutdown and startup on reboots I am having problems with the Directory Server. For instance it takes over 3 minutes for the server to stop. Here is the logs:
[16/Sep/2009:12:35:56 -0600] - Closing all interfaces port 389 for LDAP requests
[16/Sep/2009:12:35:56 -0600] - Closing all interfaces port 636 for LDAPS requests
[16/Sep/2009:12:35:56 -0600] - DEBUG - conn=-1 op=-1 msgId=-1 - slapd shutting down - signaling operation threads
[16/Sep/2009:12:35:56 -0600] - slapd shutting down - waiting for 29 threads to terminate
[16/Sep/2009:12:35:56 -0600] - slapd shutting down - waiting for 28 threads to terminate
[16/Sep/2009:12:35:56 -0600] - slapd shutting down - waiting for 25 threads to terminate
[16/Sep/2009:12:35:56 -0600] - slapd shutting down - waiting for 22 threads to terminate
[16/Sep/2009:12:35:56 -0600] - slapd shutting down - waiting for 19 threads to terminate
[16/Sep/2009:12:35:56 -0600] - slapd shutting down - waiting for 17 threads to terminate
[16/Sep/2009:12:35:56 -0600] - slapd shutting down - waiting for 15 threads to terminate
[16/Sep/2009:12:35:56 -0600] - slapd shutting down - waiting for 13 threads to terminate
[16/Sep/2009:12:35:56 -0600] - slapd shutting down - waiting for 12 threads to terminate
[16/Sep/2009:12:35:56 -0600] - slapd shutting down - waiting for 11 threads to terminate
[16/Sep/2009:12:35:56 -0600] - slapd shutting down - waiting for 9 threads to terminate
[16/Sep/2009:12:35:56 -0600] - slapd shutting down - waiting for 7 threads to terminate
[16/Sep/2009:12:35:56 -0600] - slapd shutting down - waiting for 5 threads to terminate
[16/Sep/2009:12:35:56 -0600] - slapd shutting down - waiting for 3 threads to terminate
[16/Sep/2009:12:35:56 -0600] - slapd shutting down - waiting for 2 threads to terminate
[16/Sep/2009:12:35:56 -0600] - slapd shutting down - waiting for 1 threads to terminate
[16/Sep/2009:{color:#ff0000}12:35:56{color} -0600] - libumem_dummy_thread started.
[16/Sep/2009:12:39:15 -0600] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - Could not send consumer jake.isos.isu.edu:389 the bind request
[16/Sep/2009:12:39:15 -0600] - INFORMATION - NSMMReplicationPlugin - conn=-1 op=-1 msgId=-1 - Failed to connect to replication consumer jake.isos.isu.edu:389
[16/Sep/2009:12:39:15 -0600] - ERROR<8318> - Repl. Transport - conn=-1 op=-1 msgId=-1 - [S] Bind failed with response: Failed to bind to remote (900).
[16/Sep/2009:12:39:16 -0600] - Waiting for 5 database threads to stop
[16/Sep/2009:12:39:17 -0600] - All database threads now stopped
[16/Sep/2009:{color:#ff0000}12:39:17{color} -0600] - slapd stopped.
Notice the 4 minutes to stop the server.
I used the following command in the documentation to enable automatic shutdown and startup:
dsadm enable-service /var/opt/serverxxxx
Everything worked find before I ran this command.
I have tried dsadm disable-service and it removes the SMF but the problem still exists.
Has anybody seen this?
Thanks,
GaryNever mind,
It was the firewall I had in place on my linux box where I was replicating the suffix. I remembered I had the firewall disable when I was setting everything up everything. When I rebooted the firewall was activated and thus the problems. Know I just need to go and punch the holes in the firewall.
Gary -
Mac Pro Boot Problems After 10.6.2 Update
After installing the latest version of snow leopard I am now having boot problems on my mac pro.
Symptoms;
-Screen resolution is incorrect at apple splash screen.
-Takes a lot longer than usual to boot.
-Once booted the blue tooth magic mouse isn't imediately reckonised, takes a while to find that.
-Once the mouse is finally reckonised it can move around but can't click on anything or bring up the dock. Tried a wired mouse, had the same problem.
-The keyboard is also not appearing to do anything, none of the shortcuts or quick keys work..
Had exactly the same problem after 3 restarts but on the 4th after leaving it for a good 20-30minutes it setled down and everything was working okay. However this is a recurring problem as I had the same thing yesterday...
I have a my 10.5.8 system backed up on an external so I am running from that at the moment. Don't want to go back to snowy til these problems are solved.
Any help will be greatly appreciated!
MartinTry Safe Mode (It will take more time to startup in Safe Mode because it runs a directory check.)
Let us know.
-mj -
Problem with Firefox, it logs me out from websites after I restart
Hello World!
I have a small problem. I restart my computer and after I open firefox, I notice that I am logged out of a website, for example, Facebook. (Not the only one, but one of some).
I have tried checking if I got any sites blocked under my Preferences, there are no Exceptions, the cookies do show up and everything, its the perfect scenario to actually work lol.
Then I tried checking the ArchWiki, if you recall this: https://wiki.archlinux.org/index.php/Fi … nformation it mentions something about deleting a file called cookies.sqlite, I've tried that and still no work. I've tried making a new profile and deleting the old one, and it still doesn't work.
I currently have no Addons installed because I deleted my old profile and I am currently in a blank one. Only got a few bookmarks and stuff.
I then ran out of ideas, I tried google, all I could find was something wrong with people using a script blocking addon, which currently I don't have. So does anyone have any idea what I could do to fix this?
Thank you very much you guys! Arch ROCKS!Nope, that option is unchecked. The problem is that, that only happens to certain websites, for example gmail, facebook, and I just noticed that it also happens with my school's website. The rest it just seems fine.
I tried install Google Chrome yesterday as well just to check if it was Firefox giving me that problem and apparently the same thing happens as well. It's kinda weird, I mean, I usually don't have this problem in Windows.
Well, anyways, thanks for your reply! -
My problem started when system preferences was unresponsive and would not force quit. I tryed to restart and got the grey screen, but it never restarted. I closed the lid and now the screen is blank. Has anyone had a similar problem after Lion installation?
No, as I have yet to be convinced on Lion.
Did a permissions repair help from the install DVD? -
ACE Problem after restarting Application
Hi,
we have an ACE20 and have set it up to balance 4 Containers on a Oracle Application Server. Every time we stop all Containers at the same time for longer than an hour it takes forever (hours) until the Load Balancer starts balancing the Containers again. I can see that the ACE Module is checking the Containers in the Apache Logfiles on the Application Server and gets a 200, but still we can't access the Application for a few hours. If I connect direct to the Container it also works fine... just the ACE does not work. Like it has a timeout and is waiting.
Any idea how to give it a kick?
While accessing the Application I can see that it connects, but nothing happens...
sh conn detail
total current connections : 2
conn-id np dir proto vlan source destination state
----------+--+---+-----+----+---------------------+---------------------+------+
68155 2 in TCP 191 10.200.101.73:35777 10.200.101.64:80 ESTAB
[ idle time : 00:00:18, byte count : 888 ]
[ elapsed time: 00:00:18, packet count: 3 ]
68156 2 out TCP 195 10.200.105.33:80 10.200.101.73:35777 INIT
[ conn in reuse pool : FALSE]
[ idle time : 00:00:18, byte count : 0 ]
[ elapsed time: 00:00:18, packet count: 0 ]
Thanks for any help!
JasonHi,
I'm still having problems with the ACE Laodbalancer. At the moment it doesn't seem to recover after having restarted the Application the last time.
Can someone look at the Config and tell me if they see a mistake in it?
I have three instances accesst, accesst2 and accesst3. Each instance has 4 Oracle Application Server Containers Deployed on 2 different Apllication Servers. The Site is split between 2 DMZ which are seperated by a Firewall. The Cisco Ace has one leg in each vlan (191 and 195). We always had a problem after taking the Applcation Servers down Updates that it takes forever untill the ACE Server starts blancing agian. For the last 4 Days it hasn't started reblancing yet. As far as I know nothing has changed in the Configuration of the Server or of the ACE. The Firewall Admin said he tried t find a problem, but didn't change anything.
Do I maybe have a mistake in the ACE Config? Am I missing something here?
MS4_ACE_PU/MY-APP# sh running-config
Generating configuration....
logging buffered 7
access-list anyone line 8 extended permit ip any any
probe http HEAD_1
port 7791
interval 10
faildetect 15
passdetect interval 15
receive 2
request method head url /APPLICATION/images/probe.gif
expect status 200 200
open 2
probe http HEAD_2
port 7792
interval 5
faildetect 15
passdetect interval 15
receive 2
request method head url /APPLICATION/images/probe.gif
expect status 200 200
open 2
probe http HEAD_3
port 7793
interval 5
faildetect 15
passdetect interval 15
receive 2
request method head url /APPLICATION/images/probe.gif
expect status 200 200
open 2
probe http HEAD_4
port 7794
interval 5
faildetect 15
passdetect interval 15
receive 2
request method head url /APPLICATION/images/probe.gif
expect status 200 200
open 2
probe http HEAD_5
port 7795
interval 5
faildetect 15
passdetect interval 15
receive 2
request method head url /APPLICATION/images/probe.gif
expect status 200 200
open 2
probe http HEAD_6
port 7796
interval 5
faildetect 15
passdetect interval 15
receive 2
request method head url /APPLICATION/images/probe.gif
expect status 200 200
open 2
probe http HEAD_7
port 7797
interval 5
faildetect 15
passdetect interval 15
receive 2
request method head url /APPLICATION/images/probe.gif
expect status 200 200
open 2
probe http HEAD_8
port 7798
interval 5
faildetect 15
passdetect interval 15
receive 2
request method head url /APPLICATION/images/probe.gif
expect status 200 200
open 2
parameter-map type http PERSIST-REBALANCE
persistence-rebalance
action-list type modify http LOCATION-RW-VIP-2
header rewrite response location header-value "http://accesst3.my-site.de:.....(.*)" replace "https://accesst3.my-site.de/%1"
header rewrite response content-lokation header-value "http://accesst3.my-site.de:.....(.*)" replace "https://accesst3.my-site.de/%1"
action-list type modify http LOCATION-RW-VIP-1
header rewrite response content-lokation header-value "http://accesst2.my-site.de:.....(.*)" replace "https://accesst2.my-site.de/%1"
header rewrite response location header-value "http://accesst2.my-site.de:.....(.*)" replace "https://accesst2.my-site.de/%1"
action-list type modify http LOCATION-RW-VIP
header rewrite response location header-value "http://accesst.my-site.de:.....(.*)" replace "https://accesst.my-site.de/%1"
header rewrite response content-lokation header-value "http://accesst.my-site.de:.....(.*)" replace "https://accesst.my-site.de/%1"
rserver host server103
description KS ApplicationServer
ip address 10.200.105.33
inservice
rserver host server104
description KS ApplicationServer
ip address 10.200.105.34
inservice
serverfarm host HTTP-APPL
rserver server103 7791
probe HEAD_1
inservice
rserver server103 7792
probe HEAD_2
inservice
rserver server104 7791
probe HEAD_1
inservice
rserver server104 7792
probe HEAD_2
inservice
serverfarm host HTTP-APPL-1
rserver server103 7795
probe HEAD_5
inservice
rserver server103 7796
probe HEAD_6
inservice
rserver server104 7795
probe HEAD_5
inservice
rserver server104 7796
probe HEAD_6
inservice
serverfarm host HTTP-APPL-2
rserver server103 7797
probe HEAD_7
inservice
rserver server103 7798
probe HEAD_8
inservice
rserver server104 7797
probe HEAD_7
inservice
rserver server104 7798
probe HEAD_8
inservice
sticky http-header TranSON_Cert_Subject group1
replicate sticky
serverfarm HTTP-APPL
sticky http-header TranSON_Cert_Subject group2
replicate sticky
serverfarm HTTP-APPL-1
sticky http-header TranSON_Cert_Subject group3
replicate sticky
serverfarm HTTP-APPL-2
class-map type http inspect match-any HTTP-INS-VIP
2 match header Host header-value "accesst.my-site.de"
class-map type http inspect match-any HTTP-INS-VIP-1
2 match header Host header-value "accesst2.my-site.de"
class-map type http inspect match-any HTTP-INS-VIP-2
2 match header Host header-value "accesst3.my-site.de"
class-map match-all HTTP-VIP
2 match virtual-address 10.200.101.64 tcp eq www
class-map match-all HTTP-VIP-1
2 match virtual-address 10.200.101.68 tcp eq www
class-map match-all HTTP-VIP-2
2 match virtual-address 10.200.101.69 tcp eq www
policy-map type loadbalance first-match HTTP-SF
class class-default
sticky-serverfarm group1
action LOCATION-RW-VIP
policy-map type loadbalance first-match HTTP-SF-1
class class-default
sticky-serverfarm group2
action LOCATION-RW-VIP-1
policy-map type loadbalance first-match HTTP-SF-2
class class-default
sticky-serverfarm group3
action LOCATION-RW-VIP-2
policy-map type inspect http all-match INS-PM-VIP
class HTTP-INS-VIP
permit
policy-map type inspect http all-match INS-PM-VIP-1
class HTTP-INS-VIP-1
permit
policy-map type inspect http all-match INS-PM-VIP-2
class HTTP-INS-VIP-2
permit
policy-map multi-match SLB-logic
class HTTP-VIP
loadbalance vip inservice
loadbalance policy HTTP-SF
loadbalance vip icmp-reply active
loadbalance vip advertise active
appl-parameter http advanced-options PERSIST-REBALANCE
class HTTP-VIP-1
loadbalance vip inservice
loadbalance policy HTTP-SF-1
loadbalance vip icmp-reply active
loadbalance vip advertise active
appl-parameter http advanced-options PERSIST-REBALANCE
class HTTP-VIP-2
loadbalance vip inservice
loadbalance policy HTTP-SF-2
loadbalance vip icmp-reply active
loadbalance vip advertise active
appl-parameter http advanced-options PERSIST-REBALANCE
interface vlan 191
ip address 10.200.101.65 255.255.255.0
alias 10.200.101.67 255.255.255.0
peer ip address 10.200.101.66 255.255.255.0
access-group input anyone
service-policy input SLB-logic
no shutdown
interface vlan 195
ip address 10.200.105.65 255.255.255.0
alias 10.200.105.63 255.255.255.0
peer ip address 10.200.105.66 255.255.255.0
access-group input anyone
no shutdown
Destination Gateway Interface Flags
10.200.101.0/24 0.0.0.0 vlan191 IA [0x30]
10.200.105.0/24 0.0.0.0 vlan195 IA [0x30] -
Boot issue after shutdown plus power - no problem after restart or after removing power cord
Hello,
I have a Pavilion Elite m9275.nl desktop. I experience boot issues after a regular shut down.
After a regular shut down and pressing the power button within a few seconds/minutes, it keeps hanging in the HP startup / BIOS screen, Windows 8 won't boot, the hard drive light doesn't flash;
After a restart from Windows (instead of shut down) it boots correctly from the c-drive. No hard-drive problems at all;
After a shut down and removing the power cord for 10-15 minutes, it boots correctly from the c-drive. No hard-drive problems at all.
When the PC does not boot, F10 (to enter BIOS settings) does not work neither, so it seems to be a hardware or BIOS issue.
I already replaced the CMOS battery and already loaded default BIOS settings.
During a succesful boot or after pressing F10 (to enter BIOS settings) the screen shows some disk information right after the BIOS. This is the screen that says something like "press CTRL-I to start configuration utility". During a succesful boot the hard disk light flashes shortly before displaying that screen. During an unsuccesful boot the hard disk doesn't flash.
Before replacing a hardware component, I need to know what to replace...
Could it be the hard disk controller or hard disk is defect?
Where is the hard disk controller stored?
Can I upgrade the firmware of the hard disk controller?
BUT: why does it work when I remove the power cord for 15 minutes or after a restart (instead of a shutdown and than pressing power)?
Many thanks in advance,
Sjoerd-Jaap Westrasjwestra
I apologize for the delay in responding to your post. First I am glad you were able to resolve your initial issue and to help I have included a link to a document 'Bios Setup Utility Information and Menu Options' that will provide you with instructions on how to enter the Bios and provides additional information on navigating it as well.
http://goo.gl/HIclUV
If you need any further information please re-post.
Thank you for your post.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter -
This is a worrying one - I updated Reader today and restarted after it promted me. Soon after the pc rebooted I got an error message that said "Windows has encountered a critical problem and will restart in one minute". After it restarted, I checked the event logs and came up with this error: "A critical system process, C:\Windows\system32\lsass.exe, failed with status code 1. The machine must now be restarted.". This has never happened before and I want to know if the Reader update did anything bad. I restarted several times afterwards and it didn't happen again, but still.. it's worrying me. Is this a common error after the update or am I missing something? Running Windows 7 Home Premium 64-bit
I understand that you are worried.
I have a very similar setup as yours, and nothing happened after the Reader 10.1.3 update. The one difference is that the update did not prompt me to restart Windows. (It did prompt me on several other [XP] systems.)
Let's wait and see if anyone else encountered a similar problem. -
I am using a iPhone 3GS Version 4.3.5. It restarts while voice communication. fine. After 5 to 7 mins it will make a restart randomly and after it restart. Can any help me please to fix this problem.........
try to press the sleep/wake button + home button at the same time and hold them until the apple logo appears. that should help.
-
I have 4s with 16GB storage capacity using IOS 7.1.2.
Facing hang problem after updating when i decline the call the keypad getting locked ,touch stop working unable to unlock the phone .
Then what i can do i restart the phone with pressing home key & power key together then i am able to access it.
Kindly resolve the issue as soon as possible
Ashish
[email protected]Did you already try to set it up as a new device, as explained in this article?
iOS: How to back up your data and set up your device as a new device -
Macbook Pro...my screen goes black and it restarts itself. The message after it restarts says "restart due to problems" Any ideas what I should do or look for? It randomly happens and is becomeing more frequent.
kernel panic http://support.apple.com/kb/ts3742
-
Problems after restart Windows 8.1
Hello,
I've installed Windows 8.1 pro in my laptop.
After I restart Windows 8.1 (Not Turn-off and on) and log on it, the problem is occurred.
Windows does not response and show any dialog about system, for example Control Panel, gpedit.msc, msconfig...etc
and anti-virus program(avast!), some messanger, Bluetooth, Intel Smart Connect Technology, which should be started automatically, are not started.
But I can execute Google Chrome, Microsoft Outlook, Eclipse... etc... without performance issue. It's truly normal!!
After 5 ~ 10 minutes, Windows 8.1 become fully normal state. the above problem doesn't appear any more.
Of course, if I restart my laptop, the problem will be occurred again.
The problem doesn't occur once I turn my laptop off and on manually.
Plz let me know, how can I fix the above problem!! I love all features of Windows 8.1, don't want to back Windows 7.Hi,
Please check Startup option in Task Manager if there is any items that relate with these application. If so, try to disable them for test.
Clean boot is a good way to diagnose this problem. Please have a try.
Roger Lu
TechNet Community Support -
[PI 7.11 SP3] PI components not correctly registering themselves after AS restart
Hi Experts,
We have planned a system backup shutdown and restart every night for our PI environment.
In a random manner, some PI components as XI AF or Integration Directory are not correctly registered to SLD after that restart : for example, Integration Directory registers but it is not assigned to a PI domain.
It is good to mention that PI instance is actually using its own SLD (local SLD) for registration.
When the problem occurs, I follow sap note 1117249 to manually register PI components within SLD and this solves the issue.
But the definitive solution will be to avoid incomplete SLD registration at restart … But I have not yet found any sap note for that kind of solution.
Il someone can help J
Thanks a lot
NadirHey Caio,
Thanks for the response but it doesn't actually answer my question. But to that point, for a "basic" PI post install, which of the NWA config tasks would you run other than the "initial config" ? And would you run them BEFORE you updated the SLD content (cimsap/CRDelta) ?
NW: PI - AS ABAP (Basic Configuration for Idoc, Proxy): Maintain
PI Adapter Engine in JPR Mode
PI Demo Client
PI Full Qualified Host Name
PI Self Test for NetWeaver
PI SLD Self Registration
Specifically, I did the SAPINST - ABAP/JAVA patches - Client copy - and THEN the initial config wizard (Setup a new local SLD, ). Also, during the initial config, I clicked the box marked "This SLD will be used as a name server for development" and my PI server hostname was already in the box marked "object server name". This config took about 30 minutes. I didn't see any errors or warnings. although I didn't view the log. I did go into Java JEE services and Filter for Services with name "XPI". All were green.
THEN I tried to update the SLD content.
any thoughts appreciated.
NICK
Maybe you are looking for
-
Finder/System Crashing OS10.9.4
Hi folks, started yesterday out of the blue. finder windows were bilking on and off every minute or so, then, periodically, entire system crashed. Got that "something happened" message that usually indicates kernel issue. I uninstalled Symantec, quit
-
Group Policy with different Results
I have Server2008 and Win 7 and Win8.1 clients I created the GPO in fact my Fellow made the modifications in the default group policy that Deny the USB or any removable media He exempted the Users in GPO's Delegation Tab and and select apply group po
-
Navigation bar problem - like many others
I have used Fetch to transfer my iweb page to a server, but no matter what theme i used the navigation bar will not show up, and therefore the other pages are not accessible. Many seem to have had this problem, no one has posted a definitive reason o
-
I insert DVD in my Mac mini and after a minute dvd drive ejects the dvd? What's wrong here?
-
I need to run a Windows program on MacAir! HELP!
I have a Macbook Air. I host a bowling tournament every year but the software I use doens't have a MAC version. I'm told I can download some software that lets me use a Windows program on my Mac. Any suggestions on what to use? Thanks in advance fo