Problem after Neo2 LiveUpdate to BIOS 1.B - need help

Hi there.
after updating my Neo2 Platinum mobo to BIOS 1.B with LiveUpdate I got a problem which I cannot resolve.
Here are the symptoms:   
1. Updated BIOS to 1.B with Live update. In the end got the meesage that BIOS was updated successfuly.
2. In case of 'cold' start I can enter into BIOS menu.
3. If I restart PC and hit <DEL>, I am getting only grey cursor blinking in the top left corner of monitor. After switching power off and having 'cold' start entering to  BIOS menu with no problem.
4. If I exit from BIOS menu and on the PC restart immediately hit <DEL> - I can reach BIOS menu again. If I let Windows start and then do restart - BIOS menu is not available for me (with blinking cursor) -> Power OFF required to enter BIOS again.
5. I tried to rollback BIOS to version 1.9 I used previously and got an issue here regadless if I used options from the top or simply supply bios file anme in command line
C:>AWFL859G.EXE W7025NMS.1B0
C:>AWFL833D.EXE w7025nms.190
My PC just hung and keyboard was locked out.
The only one difference I saw - in case of AWFL833D.EXE I got continuous beep sound with message "Please wait!!!". With AWFL859G.EXE PC hung and program displayed the message "Enter file name".
The reason of BIOS update was because of the PC stability. Pretty frequent it hung with red line on the top of screen....
6. No difference after CMOS clearing.
Any suggestions of how to recover from this situation are very welcome.
Thank you.

Try using a ps2 keyboard to enter brios.  Also use ps2 keyboard when you reflash.  It is possible that flashing a messed up bios (caused by liveupdate) requires yet an other correct flash to solve the problem.  Use floppy method with the command line switches described in the thread below to reset cmos etc. AND FOLLOWING SYAR'S INSTRUCTIONS about rebooting etc.
https://forum-en.msi.com/index.php?topic=86257.msg642933#msg642933
Quote:
"DOS floppy flash shall be performed with :
awfl833d.exe w7030nms.180 /py /sn /wb /cc /cd /cp /f /e
(Replace biosfilename with appropriate version for Neo1/neo2 etc , switches remain the same )
After flash is complete :
TURN OFF PSU (don't restart) wait 15 seconds
Turn on again , press the power button .
Enter BIOS and load optimized defaults (NO OTHER CHANGES) , save + exit
Boot the system again with the floppy in the drive to let the DMI pool build and update itself"
Post back and let us know if it works this time.  Good luck.   
EDIT- If the above does not work, consider modded bios as described here:
https://forum-en.msi.com/index.php?topic=88137.0

Similar Messages

  • My MacBook Pro has problem in iphoto,, I cant open it,, I need help please,,,,

    My MacBook Pro has problem in iphoto,, I cant open it,, I need help please,,,,

    Last login: Sun Apr 22 19:11:11 on ttys000
    Marlons-MacBook-Pro:~ ryanmnhs$ ls -la ~/Library/LaunchAgents
    total 40
    drwx------   7 ryanmnhs  staff   238  5 Nov 23:09 .
    drwx------@ 48 ryanmnhs  staff  1632 13 Jan 09:53 ..
    -rw-r--r--   1 ryanmnhs  staff   574 24 Oct 22:29 com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
    -rw-r--r--   1 ryanmnhs  staff   618 22 Oct  2011 com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.BAF380D0-E780-4E82-86BF-77 2440AB4936.plist
    -rw-r--r--   1 ryanmnhs  staff   895  4 Sep  2011 [email protected].plist
    -rw-r--r--   1 ryanmnhs  staff   802 21 Mar 12:56 com.facebook.videochat.ryanmnhs.plist
    -rw-r--r--@  1 ryanmnhs  staff   805  6 Sep  2011 com.google.keystone.agent.plist
    Marlons-MacBook-Pro:~ ryanmnhs$ 
    ,,,,,,,,THIS IS THE RESULT,, WHAT DOES THIS MEAN? HOW CAN I FIX MY PROBLEM? UP TO THIS DATE MY WORD, EXCEL AND POWERPOINT STILL DONT WORK!!!!PLEASE HELP ME, ANYONE? THANK YOU...

  • This sign appeared in my account: "Your payment method was declined. Update your biiling info'. After adding new information about my others cards I see the same sign. Can't understand what the problem is and what should I do. Need help!!!

    This sign appeared in my account: "Your payment method was declined. Update your biiling info'. After adding new information about my others cards I see the same sign. Can't understand what the problem is and what should I do. Everything used to be good before.
    Do anyone know what I supposed to do in that situation?
    Really need help!
    Thanks in advance.

    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Problems reinstalling...Windows 7...Need help

    I have problems after I updated my flash player.  I've done everything the guide said to do in Installation Problems;  The last thing was to uninstall it and reinstall.  While now I can't install the Flash Player at all. It keeps error out.  Now I'm really stuck and need someones help. HELP PLEASE !

    What is your operating system & version?
    What is your web browser?
    What exactly means "error out"?

  • Iphone 3Gs won't sync music, photo's etc after updating to iOS 5.1. Need help!

    I recently updated my iOS on my Iphone 3Gs and it won't sync any of my music or photo's. I'm extremely frustrated and annoyed that I can't put any of my music or photo's onto my Iphone as the new iOS (5.1) won't sync.
    I've done everything I can think of. I've done everything people have said that would work for them from the internet and nothing has worked. I need help!

    This should be helpful.
    http://www.youtube.com/watch?v=wAYuBNBjo3I
    I had the same problem on my iphone4, and it worked!

  • Problems after flashing ms-8873 bios

    I got an MS-8873 Nvdia GForce 4 MX-440-SES and when i was updating the bios of the AGP Card, my machine freezed in the midle of the process. i gave it 20 minutes before assuming it was freezed and turn it down. Now when i try to boot with this card there is just a series of beeps and no video at all. If i change in the computer BIOS the primary display adapter to onboard vga instead of agp add-on and plug the monitor video conector in the onboard video conector i can boot with the card into the slot but it seems the systems does not asign it resources because when i try to run the vga flash bios update utility it just says there is any nvidia card into the computer. What can I do? I got the next hardware:
    P4 2.4GHZ 533MHZ FSB
    MB ASRock G Pro
    DDR 2100 384MB
    Leadtek WinFastTV 2000XP Deluxe TV/FM Tuner
    LG Combo CD-RW/DVD

    xexyrbt,
    Check to see if you card has a jumper on it so you can go to the second BIOS.
    Word of advice, a Vid Card is not a motherboard. They do not need to have their BIOS' updated, they usually get it right in the first BIOS.
    Take Care,
    Richard

  • Problem after installing firmware 1.4... please help!

    Hi all, i recently upgraded to firmware 1.4 (the recent available version)... and now, every few minutes the fan generates big noises (also generating heats around the speaker area)... i looked into the Activity Monitor and i found that there are some processes that are actually using up >50% CPU usage, but the strange thing is, i wasn't using these softwares at all...
    the reason why i said it is a problem with the firmware upgrade is that, this problem didn't happen to me before upgrading.. and beside this upgrade, i didn't install any other software thereafter...
    can some body please help me? is there anything i can do? or can i restore the firmware back to the previous version? thanks in advance.

    Thanks Sweet Polly. But the fireware restoration they talked about on that page is only for those who had problem DURING the fireware installation. "Note: This CD cannot be used to return an Intel-based Macintosh computer's firmware to a previous version if a successful update has already been performed.". i've got the fireware 1.4 successfully installed, and i want to restore it back to my previous version...

  • Problem after upgrading to iOS 4.0.2. please help !

    so i'm tried to upgrading my iPod Touch 2nd generation to iOS 4, but after the installation is done, this happen to me. http://img405.imageshack.us/img405/2266/itunesg.png and i'm completely sure that my laptop is connected to the internet.
    and now my iPod remaining like this http://images.apple.com/support/ipodtouch/assistant/images/restore/welcome_resto re.jpg
    please help me because my mother will kill me soon. and i'm using windows xp
    Message was edited by: changmean

    I couldn't post anywhere so I thought to bump this one up since it's the same issue I am experiencing with my iPod Touch 2g 32gig. I decided to upgrade to iOS 4.0.2. After the new OS installed, an error message popped up on my laptop saying unable to restore my music (which was fine with me). I clicked on OK then the screen on the iPod Touch went black. I have been trying to rebooting it by using the suggested reboot/reset method: holding down power button and Home button at the same time for 10 seconds. I have tried simultaneously holding the two buttons for 10 seconds also. But neither worked for me. Right now I can't get it to turn on anymore.
    One thing to add, my laptop no longer recognize the iPod Touch due to this issue.
    Please help suggest.
    Thanks in advance

  • Problem with iBook powering on... Need help diagnosing please

    Hello,
    So for awhile my iBook G3 (dual USB, 700 mhz, 12" display) when the power is pressed the computer chimes and the hard drive will start spinning and then nothing happens. After a few seconds I can hear the drive stop spinning and the only sign of power is that the keyboard will light at the caps lock key.
    I tried doing a PMU/PRAM reset and the iBook did a long beep noise, then the hardrive started spinning, then power light started flickering, and than it chimed and that's it.
    Not sure what to do with it. I love this computer, and all though it's older and well out of date, it's ultra compact and worked great for wireless internet surfing when away from home. I'd appreciate any help to help figure out what this problem is and if it's worth paying to get it fixed or to replace it.
    Thanks for reading,
    Matt
    iMac G5, iBook G3, iMac DV   Mac OS X (10.4.9)  

    First, check out the Apple Knowledge Base article on troubleshooting portables that won't turn on or start up to see if something there helps.
    It sounds like you may be having logic board problems. Enough Dual USB G3 iBooks suffered from the logic board problem that Apple began the iBook Logic Board Repair Extension Program in January of 2004. Check out the FAQ page and if the symptoms look familiar and it is not past the three-year time limit, give Apple a call.
    You can find the original purchase date of the iBook, by entering its serial number into the box at the bottom of Apple's main support page under "About Your Support Coverage."
    If it is past the three-year time limit (and it probably is), you may want to consider trying the shim fix suggested by John Sawyer in the Apple Discussions iBook G3 (Dual USB) Displays Forum:
    [Y]ou can often fix this yourself by removing the iBook's bottom housing, and placing a shim of any sort, about 1mm to 1.5mm thick, onto the raised square on the bottom shield. I use a Scotch mounting square--you can get them in hardware stores and many grocery stores. When you reinstall the bottom case, it will press against this shim, which will press against the graphics chip, and may allow the chip to come into better contact with the logic board.
    John Sawyer
    CJS Macintosh Repair
    Instructions for removing the lower case:
    iFixit.com
    If the shim fix doesn't work (or you're leery of trying it), DT & T Computer Services in Fremont, California offers the cheapest repair I've found. They have a six-month warranty on the repair.
    Once you get it fixed, try never to pick it up by the left front corner alone. The theory is that picking it up by the left front corner alone can contribute to logic board failure when the case flexes, causing the graphics chip to come loose from the logic board. If you're picking it up in your left hand (as I often do mine), pick it up in the center under the trackpad.
    If you can't manage to get it fixed free or on your own with the shim fix, I almost think it's a better idea to put the money you would spend on a repair toward a new MacBook. They are such a spectacular upgrade over the iBook G3. Hard drive specs, USB 2.0, RAM, processor, Tiger, the newest version of iLife, built-in AirPort Extreme, Bluetooth capabilities, and built-in iSight camera. If you can afford it, that may be the way to go. With a new MacBook, you have the option of using Migration Assistant to transfer your data to the new computer, but that likely won't work if you can't get the iBook to start up at all. However, with a new Mac, you may be able to retrieve some of your data using FireWire Target Disk Mode.
    Good luck. Let us know how things go.

  • There are times 5s lagging very bad after I update the IOS 7.03, need help

    Before I update to  my IOS 7.03, I don't have this problem before.  But now, once in a while my phone is lagging very bad, not sure of why.  But it will goes away after a while. Anybody else having the same problem? 
    It happens most of time during log in.  It's impossible to use the finger print log in when lagging; and when type in passcode, letter sometime take 1 second to respond on screen.

    Basics from the user guide are restart, reset, restore from backup, restore as new. Try each step in order until your problem is solved.

  • New hard disk after time machine restore doesn't boot, NEED HELP

    Hi,
    I just bought a new hard disk for my computer and it works fine if you just install the OS X, but every time I do a restore from my time machine I received a screen after the boot that tells the following:
    "You need to restart your computer, hold on the power button until it turns off, then press the power button again."
    This message appears in many languages, I do the restart and the same message comes again every time.
    I already tried the disk utility when I boot with the OS X DVD and says that the disk is ok. I also tried a PRAM reset.
    The result is the same message.
    Does any body knows what I am doing wrong or why is this happens?
    thanks for any help

    This is a kernel panic. They are often, but not exclusively, hardware related. Some reading for you:
    http://support.apple.com/kb/HT1392
    http://www.thexlab.com/faqs/kernelpanics.html
    If this only happens after a full restore from TM, that might suggest something you are copying back over is causing the problem. You may want to ask in the Snow Leopard TM forums about how to identify the culprit, or do a partial restore that might skip the system files likely to cause a panic:
    http://discussions.apple.com/forum.jspa?forumID=1342
    Good luck!

  • Bios reset 1151nr NEED HELP BEGGING YOU!

    I have a hp 1151nr mini notebook my friend gave me because it had a broken screen that i didnt do anything about for 2 years. I finally ordered a new screen got it up and running but there's a bios pass i cannot reset nor does he remember,  its been so long. can anyone help me reset this?
    the hault code is CNU9276JDD
    Please i need this reset! Thanks in advance.
    This question was solved.
    View Solution.

    Hi,
    Try entering:        e9lo7xgwtt            ( Note that the 3rd character is a lower case L )
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Problem with Flash Menu in iWeb...need help please.

    Ok, I designed a flash menu in iWeb and successfully placed it at the top of the site. I then used the "transparent shape" method to make the hyperlinks work properly. I made sure the flash menu was in the back and the transparent shape hyperlinks were in the front. The menu works just fine for me and anyone else using Safari or Mac computers. However, people on Windows using Firefox, IE or Chrome are unsuccessful in clicking the links. They do not work for them.
    Here's my website's homepage link. Keep in mind, if you look there on Safari, it will work but it does not when on a Windows computer. Any help is greatly appreciated.
    http://www.platinumsportspicks.com/Index/Home/Home.html
    It is clearly the problem that the flash menu is opening in front of the hyperlinked shapes but I'm not sure how to make sure they stay on front.
    Message was edited by: kwgrooms

    I don't know the answer to that one but you can use the Mouse Over and Click method I have described on this page....
    http://www.iwebformusicians.com/Tricks/MouseOver.html
    It works in IE.
    Its just a question of making up two different buttons with text for each link, taking a screenshot and cropping them and adding the JPEGs to your upload folder.
    You can make up the buttons on an iWeb page and then delete them when you have taken the screenshots. I usually do this sort of thing in Keynote so that I can save them in case I need to modify them.

  • Problems with iPhone 3G Activation , Error Message (-50), Need HELP!!!!!!!!

    Hi,
    I bought the iphone 3G yesterday through Virgin Mobile. I was told to activate my iphone I need to sync it with iTunes.
    I plugged in my iPhone and it try to sync for a while then an error message pops up. (*We could not complete your iTunes Store request. An unknown error occured. (-50).There was an error in iTumes store. Please try again later*.)
    I've tried several things, reinstalling iTunes, change the options in my internet browser (Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.0.5) Gecko/2008120122 Firefox/3.0.5), turn off my anti-virus software. But the problem still occur.
    I can access iTunes store and my playlists etc, but when I click on Sign-in and then click on create new account the same error message pops up again.
    I've tried to run diagnostics on iTumes. It says that secure link to iTunes store failed. I've passed all connectivity and sync test. Below is the details,
    Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
    LENOVO 0658A22
    iTunes 8.0.2.20
    QuickTime 7.5.5
    FairPlay 1.1.11
    CD Driver 2.0.7.5
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 2.1.2.7
    Bonjour 1.0.6.2 (118.5)
    iTunes Serial Number D763986FFBC26648
    Current user is an administrator.
    The current local date and time is 2009-01-16 00:15:20.
    iTunes is not running in safe mode.
    Video Display Information
    Mobile Intel(R) 945GM Express Chipset Family
    Mobile Intel(R) 945GM Express Chipset Family
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** Network Connectivity Tests **
    Network Adapter Information
    Adapter Name: {CF15D5A8-9110-4EEF-9AFC-3CC17DD113AE}
    Description: Intel(R) PRO/Wireless 3945ABG Network Connection - Packet Scheduler Miniport
    IP Address: 192.168.1.4
    Subnet Mask: 255.255.255.0
    Default Gateway: 192.168.1.1
    DHCP Enabled: Yes
    DHCP Server: 192.168.1.1
    Lease Obtained: Fri Jan 16 00:09:58 2009
    Lease Expires: Fri Jan 16 01:09:58 2009
    DNS Servers: 192.168.1.1
    192.168.1.1
    Adapter Name: {F7421B4F-64B7-47A9-BFDD-A004DE5F7FCB}
    Description: Broadcom NetXtreme Gigabit Ethernet - Packet Scheduler Miniport
    IP Address: 0.0.0.0
    Subnet Mask: 0.0.0.0
    Default Gateway:
    DHCP Enabled: Yes
    DHCP Server: 255.255.255.255
    Lease Obtained: Fri Nov 07 17:38:56 2008
    Lease Expires: Tue Jan 19 13:14:07 2038
    DNS Servers:
    Active Connection: LAN 連線
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Disabled
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was successful.
    Connection attempt to iTunes Store was successful.
    Secure connection attempt to iTunes Store was unsuccessful.
    An unknown error occurred (-50).
    Secure connection attempt to iPhone activation server unsuccessful.
    An unknown error occurred (-50).
    Last successful store access was 2009-01-16 00:10:18.
    ** iPod/iPhone Connectivity Tests **
    iPodService 8.0.2.20 is currently running.
    iTunesHelper 8.0.2.20 is currently running.
    Apple Mobile Device service 2.12.33.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
    Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Connected Device Information:
    iPhone, running firmware version 2.2
    Serial Number: 878514GXY7K
    ** iPhone/iPod Touch Sync Tests **
    Sync tests completed successfully.
    Anyone have an idea of what's happening please let me know. I really want to start using my iphone.
    Thanks heaps
    Bec

    No need to SHOUT. The cable is the one used to connect your iPhone to your PC. Suggest getting another one.
    The problem may be that you're using USB to connect to the internet. It's too slow and will cause problems when you have other high speed USB connections. Use an Ethernet connection to your modem/router. For additional troubleshooting, see these Apple support articles:
    http://support.apple.com/kb/TS1495
    http://www.apple.com/support/iphone/troubleshooting/
    Message was edited by: modular747

  • My cellular data has stopped working after updating to ios 6.1, i need help, urgently...!!!

    This is just crazy, i just updated and now nothing works...whats wrong with apple developers, i m stuck here now! what do i do...such thing is now happening so frequently, i am never goin to get another apple product here after, I just stupid!!!! cant believe this..!

    Have you tried restarting or resetting your iPHone?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPhone shuts down, then press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"

Maybe you are looking for