Problem: after saving endtitle gets unreadable

Hey there,
I have a problem with the endtitle.
It rolls from the right side to the left side. If I watch it in Premiere it looks very well,
but after saving the movie as an mpeg-file the quality of the movie is great but the endtitle
looks terrible...what could be a reason and how can I make it look better?
Thank you!

Yes, if one uses the Title Animation Presets, the Duration of the Title affects the speed of the Animation.
As the Title Animation Presets do not offer much control, other than that speed/Duration, mentioned above, I normally use the Fixed Effect>Motion>Position, to "animate" my Titles. This gives me ultimate control, and will even allow me to do things like "pause" a Title, within the animation.
I also normally use an old "rule of thumb" by keeping the Title on-screen to give the viewer time to read it 1.5 times, and also use large, bold san-serif fonts, with good contrast in both density and color, for ultimate readability.
Most of my Projects are SD to start, with DVD-Video being the ultimate output, and my Titles look great on an SD CRT TV, and with a good, up-rezzing DVD, or BD player, quite good on an HD TV.
Now, with an MPEG output, quality, and especially regarding motion (what you have with an animated Title), much will depend on the Bit-Rate of the output file.
For playback on PC's, it sounds like you are creating a DVD-Data disc (not a DVD-Video), with just the MPEG file. Is that correct?
Good luck,
Hunt

Similar Messages

Audio sync problem after saving to QuickTime file

Hi there, I'm relatively new to Adobe Premiere - I'm not quite knowledgeable enough about video editing to really use it to its full potential but needed something more flexible than Windows Movie Maker. I haven't had any problems before editing smaller files, but am having tons of trouble with a 2.7 gig file.
I'm trying to take a 2.7GB .MOV file recorded on a Kodak Zi6 and divide it into three roughly equal parts to use an email sharing service that has a maximum file size of 1GB (I know that there are sites that will allow 3GB files and I wish I could use them, or use an FTP server, but the person who needs the video needs it to be sent over his own company's file sharing system). It was recorded on an 8GB SD card, that SD card was put into my computer, and I then transfered it over to Premiere Elements 8.
I rendered the entire file first (it wouldn't even play until I did that) and after rendering, the audio and video were good and everything was synced up. I then split the clip into three and saved each as a separate project. Then I opened one up again and tried to save as a Quicktime file (that's what the person I'm sending it to requested). All seemed to go well, and for the first minute or so of the 15 minute clip everything is great. Then after that, the audio gets more and more out of sync as the video plays on. I tried playing it on several different players, same thing.
My computer (a Cyberpower PC) is running an Intel Core i7 CPU, 870 @ 2.93GHz 3.06 GHz; 8 GB of RAM; NVIDIA GeForce GTX 285; Windows 7 Home Premium. I'm not sure where to get the rest of the information requested in the "How to best ask for help" post but if you can give me some guidance I'll find it.
The presets are on the defaults because I wasn't aware of them until I came to this forum. Happy to try the whole process again if someone can tell me what the presets should be changed to.
I'm looking for a solution to this particular problem, but am also looking for some basic help about files. The files that I used most often usually come from a Kodak Zi6 (.MOV) or a Flip Mino HD (MPEG4 I think; had to convert those to something else to use them in Premiere at all). I have AVS Video Converter 6, so I can convert those files to pretty much anything. I'm wondering what I should convert files to before trying to edit them in Premiere, and how best to save them. I rarely use the files anywhere but online if that helps (this particular 2.7GB file being a big exception) at a maximum width of 550 pixels, so I don't think I need the quality to be all that great; it's more important to me to be able to work a bit quicker, without rendering that takes hours.
I'd also love to take advantage someday of some of the more advanced features of Premiere, so I was wondering if anyone knows of any tutorials that will walk me through things in a linear way (as in, start from the beginning and teach me what I need to learn before moving on to something more complicated).
Thanks so much for your help, and please speak slowly; I'm in over my head!

Very well-done post, and welcome to the forum.
First, many have issues with OOS (Out Of Sync) with QT files on Export/Share. This is not just with PrE, but PrPro also. Unfortunately, OOS is pretty easy to fix, when you encounter it on the Timeline, but almost impossible to fix when it creeps in during Export. As an aside, I fought some MPEG Audio from a client, that was perfect in the Timeline, but when Exported to MPEG-2 for DVD-Video, ALWAYS went OOS dynamically, and even adjusting for that on the Timeline (rather guessing how much OOS the other direction I needed,) just flat would not do it. Sync would be fine for awhile, and then suddenly start going out, before miraculously returning to sync with the next Clip. Never could get that one correct.
In your MOV Export/Share, I am not certain which CODEC you chose. Was it H.264?
Within the MOV "wrapper," did your recipient give you any options for the enclosed CODEC's, or is the wrapper and the file size the determining factors?
Wish that I had more to offer directly, rather than questions.
As for the tutorials, I strongly recommend Steve Grisetti's Learning Series, his Boot Camp and his many articles and general PrE tutorials on Muvipix. He also has several books, available there too.
Good luck,
Hunt

After Saving File get Message "Could not find the included template"

I have a strange issue going on and it's becoming very, very annoying. When I edit a file on our web server (it's a virtual machine running Windows Server 2008) and then try to view it in my browser, I get the error message "Could not find the included template". If I refresh the page (sometimes upwards of 40 times) my page with whatever changes I made will finally load. I checked with our system administrator and he's not aware of what could be causing this.
It happens on whatever the most recent file I was working on. If it's a ColdFusion file, I get the "Could not find the included template" error. If it's a change to my stylesheet, the styles will not load. Again, in both instances it takes hitting F5 upwards of 40 times until the page displays correctly.
Has anybody else ever encountered such an issue? It's happening on two separate virtual servers (both Win 2008), one has CF9 installed and the other CF10. It get's frustrating having to referesh before the page or stylesheet get picked up. Any help or suggestions are appreciated!
Thanks.
Brian

azuro28 wrote:
> I'm new to ColdFusion and after I edit a cfm
(template.cfm) file using vim, I
> got the following error:
> Could not find the included template template.cfm
>
> page.cfm contains:
> <cfinclude template="template.cfm">
>
That means that the file 'template.cfm' is not where
ColdFusion needs it
to be so that it can include it. Which is generally in the
same folder
at page.cfm with that syntax.

Problem after saving the billing document

HELLO SD GURUS
WHEN I SAVE THE BILLING DOUCUMENT (F2)...IT HAS SAVED...BUT ITS NOT GOING TO ACCOUNTS.....IN VFO2 T.CODE WHEN I
RELEASE TO ACCOUNTS IT SHOWING LIKE...ACCOUNT TYPE D IS NOT DEFINED FOR DOCUMENT TYPE RE
WHAT DOES IT MEAN FRIENDS
ANY IDEA PLZ SUGGEST ME....
THANKING YOU
REGARDS
RAM

Dear Ram,
Don't post the question in capital letters.
Coming to your post,go to T.code VOFA select your document type there in General control tab you can find
Document Type here give the " D" and try to post the accounts.
Couldn't able to find the solution take the help of FI consultant ask them which accounting doc type they created for that billing type,and assign the same and try.
For standard procedure it is in blank if you defined your own in that case you have to specify the accounting document type.
Check and revert
Regards
Ram

Problem when saving an order after using userexit_save_document

Hi
We are doing an enhacement in sales order capture, and we have next problem, after saving the order, the change of adding the new order is not saved in CDHDR table with the I (of Insert), that's only one problem, but I have another worst , after I use exit save_document, I'm saving data in a Z table, and debugging the program, when I finish the exit save_document the Z table is Ok saved, with the correct data saved, but when I pulse F8 to make the order being complete saved, something is happening because the Z table changes its values as if I run the VA02 , but I'm still in VA01 finishing the saving of the new order, It's very weird, and I don't know if somebody has experimented something like this, please let me know, because its very Urgent!!
Thanks
Regards
Soraya

Hi,
To have the changed values being reflected in CDHDR, for the fields you wanted to track the changes- In Ztable, AT Dataelement level, In FURTHER CHARACTIRSTICS tab check the box CHANGES DOCUMENT, if you check this checkbox then this becomes the pre requisite for the CDHDR entires. Then in SCDO trnsaction try to cretae a Change document object for this table.
I think the table is not locked for entires. For this table provide the authorization checks then we can restirct others to enter the value into the table.
Try to use Authorization objects or LOCK related Function modules like ENQUEUE and DEQUEQUE.
Reward if helpful.
Best Wishes,
Chandralekha

Cannot delete pages after saving a PDF in X Pro

I am on Windows 7 and Adobe Acrobat XPro. Every time I try to delete pages in any PDF after saving I get the error message "one or more pages are in use and could not be deleted". the work around is to close the file and then reopen. Then you can delete the pages. It is annoying to have to shut and reopen the file everytime after making a change. Is there a fix to this?

Have you tried Help > Check for updates (in Acrobat)?
That very annoying problem is fixed in XI. I seem to recall it could be fixed by updating X, but I could be mistaken. Please report back.

After saving pages document to iCloud on my mac I can't download it on my pc as pdf...

hi! I've got a problem, after saving pages document to iCloud on my mac I can't download it on my pc as pdf... only pages available, when I do the same on iPad everything is fine... is there way to fix it?

Welcome to the Apple Community.
You need to open the documents on an iOS device before you can open them as anything other than pages documents.

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,, Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
I can open the RAW file only if I restart my computer - very annoying!
However, thanks for the advice about the video card & memory.
So, I'm still stuck as to what the issue is.

How InDesign comes to know about any changes on document, but not saved. As it shows * on the name of document when it is opened and any changes. And after saving * symbol is get removed from the name of document. How and where indesign@ handles this?

How InDesign comes to know about any changes on document, but not saved. As it shows * on the name of document when it is opened and any changes.
And after saving * symbol is get removed from the name of document. How and where indesign@ handles this?

Are you just asking because you want to know, or do you have a problem you need to solve? I don't know how to write a program, but I think what your are describing is not an unusual thing for a program to do. The * tells you that changes have been made since the last save, and the program reserves a portion of memory for undo functions. I suppose a coder could tell you how it works, but I don't think it would help an average user to know, but that's just my opinion.

PDF file won't open after saving it from the web. get error message file is damaged.

My PDF files won't open after saving them to Docs from the web. I get error message file is damaged. Can someone help me correct this problem on Mac Air w Mountain Lion?

I wonder if the image is being embedded somehow and there is not enough scratch disk space to render the file. Just a hunch. Check your hardrive to see how much free space is available. Also, check your RAM and see if you can upgrade ( install more, install much more ) to max out as much RAM as possible. At a minimum, check for fragmentation and do a "Correct Permissions" via Apple's Disk Utility.
But, weird things start happening when a font becomes corrupt. Not that one is, but it may be in your best interest to acquire a font management utility like Font Agent PRO ( if you don't have one already ). A good font management program can detect and disable corrupt fonts.
CS1 and OSX10.4 should be fairly compatable with the 7500, but you may have gone as far as you can go. Think about upgrading to a G4 or a G5. I believe the 7500 was pre G3 ( which I think is the minimum requirements for CS1 ).

Hi, I cant open a document I have been working on. It has previously been saved without a problem now all I get is a box stating that the file cannot be opened. Any suggestions please?

Hi, I reecntly purchased a Mac and the Pages App. But now I find that I cant open a document I have been working on. It has previously been saved without a problem now all I get is a box stating that the file cannot be opened. It is visible in both the Pages Windows and under Recent Items but just will not open. Any suggestions please?

Hi Colourdoodles,
Maybe the document is corrupted. Can you open other Pages documents? Preview may open it. Right click (or control click) on the document in Finder and Open With > Preview.
If that works, Edit > Select All, Edit > Copy. Then paste into a blank Pages document. Formatting may be messed up, but you will have editable text. Then Save (with a different name), close and see if you can open the new document.
Regards,
Ian

Problem with saving a pdf file to computer. Continually get an error message " This document could not be saved. There was a problem reading this document (21).

Need advice on a saving file issue. I'm having problem with saving a .pdf file to computer. Continually get an error message " This document could not be saved. There was a problem reading this document (21). This is new as this error message just recently started to pop-up.

More information about this issue can be found here:
https://forums.adobe.com/thread/1672655
A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
Then download each of the individual updates and run them sequentially.
I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
Adobe Reader 11.0 - Multilingual (MUI) installer    AdbeRdr11000_mui_Std
Adobe Reader 11.0.01 update - Multilingual (MUI) installer    AdbeRdrUpd11001_MUI.msp
Adobe Reader 11.0.02 update - All languages    AdbeRdrSecUpd11002.msp
Adobe Reader 11.0.03 update - Multilingual (MUI) installer    AdbeRdrUpd11003_MUI.msp
Adobe Reader 11.0.04 update - Multilingual (MUI) installer    AdbeRdrUpd11004_MUI.msp
Adobe Reader 11.0.05 security update - All languages    AdbeRdrSecUpd11005.msp
Adobe Reader 11.0.06 update - Multilingual (MUI) installer    AdbeRdrUpd11006_MUI.msp
Adobe Reader 11.0.07 update - Multilingual (MUI) installer    AdbeRdrUpd11007_MUI.msp
Adobe Reader 11.0.08 security update - All languages    AdbeRdrSecUpd11008.msp

Window Focus Lost After Saving Page - Any Way To Get It Back With Keyboard?

I've recently begun using Safari for Windows after having used Opera for years, and have run into a problem with window focus that I didn't have with Opera. Specifically, if you save a web page in Safari, you then find that the following functions are no longer available from the keyboard:
1. Going back to a web page previous to the one that you just saved. Ctrl+[ does not function.
2. Performing a search. Ctrl+F does not function.
3. Scrolling to the bottom or top of the page. Ctrl+End and Ctrl+Home do not function. (For some reason, however, the PageUp and PageDown keys do still work in this situation.)
Why is this, and more importantly, is there a quick and easy way that you can, using only the keyboard, regain the window focus so that these functions will work again? I'm currently having to click somewhere on the page I've just saved in order to regain the focus. This is a nuisance.
Thanks for any advice.
George
Message was edited by: safwin

Thanks very much. Hitting 'Alt' button after saving the page does resolve the first (and most important) two of the three issues I listed above. FWIW, the Ctrl+End and Ctrl+Home functions only work in this post-save scenario (as I discovered by experimenting a few minutes ago) if you hit the 'Alt' button twice (or if you do something else, like perform a search and then use Ctrl+End/Home).
By the way, before posting a few days ago, I had tried using the Alt+Tab method when I had two or more applications' windows open, and it didn't help. But, after reading your last post, I've found that if you use Alt+Tab when Safari is the only window open, then it does resolve the issue, although of course, as you've indicated, it's not actually necessary to hit the 'Tab' key.
Thanks again!
George
Message was edited by: safwin

After saving a pdf in safari and trying to open I get an error

After saving a pdf in safari and trying to open I get this error: There was an error opening this document. Acrobat cannot open this file because a task is still active in Acrobat. Please return to Acrobat and end the task before opening this file.

Remove Acrobat and use Preview instead of the Adobe disease

CS4: get file name after saving for web

Hello,
I am saving a file via "save for web" with a specific file name in a specific folder maybe with a specific resolution (width x height) entered directy within this dialog window.
Is it possible to get this path and the optionally changed resolution via Adobe script (after saving the file; or starting the script just before "save for web")?
Thanks a lot!
Carlos

I don't see anyway to get the user's options from the SaveForWeb dialog. The descriptors for both charIDToTypeID( "Expr" ) and charIDToTypeID( "Mn " ) are empty.
But you can use the DOM to sfw. Below is a function to save jpg using sfw.
function SaveForWeb(saveFile,jpegQuality) {
var sfwOptions = new ExportOptionsSaveForWeb();
   sfwOptions.format = SaveDocumentType.JPEG;
   sfwOptions.includeProfile = false;
   sfwOptions.interlaced = false;
   sfwOptions.optimized = true;
   sfwOptions.quality = jpegQuality; //0-100
activeDocument.exportDocument(saveFile, ExportType.SAVEFORWEB, sfwOptions);
Look up ExportOptionsSaveForWeb in the scripting guide for other formats.
You would have to do the resize as an extra step when saving using the DOM.

Problem: after saving endtitle gets unreadable

Similar Messages

Maybe you are looking for