Problem after the uninstall of windows with the bootcamp assistant!!!!

I have too problems: The first is my bad english i like to excuse for that. I hope you can even so understand my main problem. I try to describe it to you: I install windows on my mac. After a short time i decide, i don't like it and i uninstall it with the bootcamp assistant. Than i want to start my mac but it didn't work. My mac want to start windows even though I install windows.
I think there is something that isn't uninstall but i don't no where and what i can do against this problem???

If you can't boot into OS X, then hold down the Option key on startup, and select your OS X partition.
After that, do what the above poster said, so that the Mac knows to always boot to that volume.

Similar Messages

Why is my iphone 5 having network and battery problems after the ios 6.1.2?

why is my iphone 5 having network and battery problems after the ios 6.1.2?

I also forgot to mention that when it did have power, it wouldn't let me shut it off to try and conserve the battery life. Right when it powered down it would power right back up.

I have recently installed windows XP on my bootcamp partition. I am in need for the drivers and what not so that it will run effectivly and the bootcamp assistant canot find the "Windows Support Sofware" Can anyone help me find it manually?

As the title has stated, I have recently installed Windows XP on my Bootcamp Partition. I am in need of the "Windows Support Software". I am assumeing that is the information that has the Drivers and what not that allow me o properly use my Mac with windows. If anyone can help me locate this inforamtion i would be greatly.... Greatfull.
P.S. The bootcamp assistant is telling me that the Windows Support Sofware canot be found.

You both would have had correct awnsers, but i have a Macbook that is close to three years old. And i can't seem to find my Disc. The only reason i haven't ordered a new one in case of emergencies is I plan on upgrading to the new OS in less then a month.
I think the following may help me (In case anyone els is looking):
http://support.apple.com/kb/DL830

Can't install Windows 8.1 because the Bootcamp Assistant-partitioned disk is GBT and not MBR.

I can’t install Windows 8.1 because the Bootcamp Assistant-partitioned disk is GBT and not MBR, and attempting to format the bootcamp disk does nothing. I have read up on this issue, and the only solution seems to be to make a backup of my computer and reformat all disks via 8.1 setup terminal. I REALLY do not want to do that, is there any way to fix this? I’m on OS X Yosemite, if that pertains to the thread.

Interesting. It wouldn’t install because I had FileVault enabled. Huh. Disabling it saved the day.

I need to install windows 7 on my iMac. I used the bootcamp assistant to partition the drive (101Gb). My bootcamp partition, when I am to choose a partitian, was deleted (by an instructor) I think I might need to repartition my hard drive. What do I do?

I need to install windows 7 on my iMac. I used the bootcamp assistant to partition the drive (101Gb). My bootcamp partition, when I am to choose a partitian, was deleted (by an instructor) I think I might need to repartition my hard drive but I am not sure. What do I do? I haven't ruined my iMac have I?

Help! I can't do my college homework if I can't run windows on my iMac! (school is on windows, limited access to the library)

When I ran the bootcamp assistance for software update I get an error that it can't download from the server

Install Mac OS X lion fine without any issue
I'm trying to dual boot Lion and Wind 7 on different HD but when I ran the bootcamp assistance for software update I get an error that it can't download from the server.
I also try without downloading the software and do the installation but it fail. It seem that this bootcamp is giving problem so I revert back to SN leopard and it does the same. Why can't the bootcamp assistance update the software, is it something that I did wrong or my system is not supporting dual booting.
Here is my spec
Apple Mac Pro "Quad Core" 2.66
Identifiers: Mac Pro - MA356LL/A - MacPro1,1* - A1186

MacPro1,1 has EFI32 and does not support Windows 7 very well, can't boot 64-bit, can't use all your RAM.
There have always been trouble and issues, ways around those, but a big PITA too.
Select CD-ROM Boot
Select CD-ROM Boot Error Apple
Nothing to do with Lion actually. Other than downloading drivers from Apple servers has been mostly hit or miss, with miss being 90%.
I have rebuned the DVD (make a new ISO image using Imgburn etc) but now I just install Windows on PC then move the drive to the Mac. A lot easier.
Without 64-bit you can't use more than 1.9GB RAM. And you need Windows 7 Pro to use both processors.

How to install Windows 7 on 2010 MacBook Air with Lion - Bootcamp Assistant 4.0.1 from USB drive?

I want to install Windows 7 on my 2010 MacBook Air running Lion - Bootcamp Assistand 4.0.1 from a USB drive. I've done this in the past when I was running Snow Leopard and the process was rather easy but now Lion updated the Bootcamp Assistant so i'm no longer able to create a MBR partition without a Super Drive installed. Does anybody managed to do that? Thank you.
The old process working on Snow Leopard:
http://howto.cnet.com/8301-11310_39-20020513-285/install-win-7-on-macbook-air-fr om-a-usb-drive/

Nobody managed to install Windows 7 from a USB drive on a 2010 MacBook Air running Lion?

Can I hide or remove the bootcamp assistant launch icon?

I clicked the bootcamp assistant icon and it opened a window that will not close. How do I get rid of it?

I don't know if this is still an issue for you if so, then hopefully this will help. Place your mouse over the icon, press down and a menu should pop up that has the offer to "quit" select it and it is gone from your launchpad!

I need help with problems after the April 2015 update

In December 2015 I purchased an LG G3. It started out great. Then often people couldn't hear me..sometimes with the speaker on, sometimes with it off, sometimes on bluetooth with my car,.or my voice faded in and out, or sounded muffled or garbled. After over a month of these frequent audio problems and several calls to Verizon during which they boosted my signal and guided me through a factory reset which took all of my photos out of their albums, the final suggestion a few days ago (April 21, 2015) was to download the new software update. I did and I'm not happy with some of the changes e.g. I wish I could have the old home touch buttons back,The jury is still out on sounds quality, but now I have two new annoying problems.
The first is that my car and phone used to bluetooth (connect) as soon as I put my engine on. Now, every time I get in my car I have to go into settings and give the phone permission to have other devices find my phone. Then after one or two tries the bluetooth eventually connects them. I am a Realtor and I need my phone and car to connect automatically every time I get in. I can give the phone permission to connect for up to an hour, but then it goes off. How do I get the opton to stay on?
The second is that I often turn my data off, and I used to do it from the notification panel that I can pull down. I just pulled it down and tapped "data" and the light would go off if the data was off and on if it was on. Now when I tap "data" I can turn it on or off, but the data button stays lit so when the data is off the light is still on. No more quickly glancing to see the data status...I have to tap it and read the notice to find out. Yes, 3G or 4G light up in tiny letters at the top, but data is the only button that stays lit when it is turned off.
Am I missing the steps that would fix these issues?

SiBIMe,
I am sorry to hear of the issues with your device before and after the update. We want to restore the love back to your device. Please keep us posted on the audio issues to see if the update did assist with that issues.
In regards to the two new problems, we want to make sure we get this worked out. Do you have issues with the device only auto connecting to your car or all bluetooths? Do you receive and error message when the device doesn't auto connect and you attempt to connect manually but it fails? As for the data icon, when you tab on the data icon from the notification tab does the 4G actually disappear even thought the data icon is still lit?
Please test your device in Safe mode and let us know if you still experience the same issues. Here is how to place the device in safe mode. http://vz.to/1owbN8K
LindseyT_VZW
Follow us on Twitter @VZWSupport

Problems after the last Apple Security Update with trackpad/mouse tapping/clicking

Dear All,
I do have a MacBook Pro 15 (early 2008), Mac OS X (10.6.8). The logic board was replaced a couple of years ago under Apple warranty (distorted video problem). I am planning to repalce it after the next apple update on the macbook pro line. Before someone asks, I am using Snow Leopard because I still have some programs that needs Rosetta. I did apply the last security update and after I did shutdown and restarted the computer last night, the trackpad/mouse (mighty mouse, usb mouse) is not working properly. I just cannot do the left click or tap on the trackpad. The mighty mouse works perfectly, except the clicking. The same for the trackpad (tapping). I manage to open a pdf file with some keyboard shortcuts. I can use the mouse/trackpad to scroll and zoom in/out the document. I can use the trackpad to rotate the document, etc. Pressing on the might Just can´t tap/clock on the document to select or open it.
I alread did the obvious thing: command-alt PR, start in safe mode, unplug the power/battery for a few minutes...
Did you have a similar problem with the last security update. Do you have any suggestions.
Thanks,
Carlos

I have resolved the issue! As I mentioned, I am using a Logitech cordless optical mouse. I connected up my Apple keyboard & mouse and disconnected the Logitech. The problem no longer occurred with the Apple mouse.
I removed the batteries from the Logitech mouse and disconnected the USB receiver. Restarted the computer, reconnected the Logitech setup, disconnected the Apple stuff, and now it is working.

The only way to fix Xperia P problems after the jelly bean update!

After the jelly bean update my Xperia got slow, I could not answer phone calls, the call log took so much time to appear , I have tried uninstalling external softwares , reseting the phone , nothing worked. Finally I have downgraded the phone follwing the guidelines provided in this link - http://talk.sonymobile.com/t5/Android-development/GUIDE-How-to-Install-Jelly-Bean-ICS-Ice-Cream-Sand...
Now my phone is fast , gallery is working fine , I can receive phone calls , no useless chrome by default , the google search widget works fast , the overall performance is much better. So I would recommend people to downgrade their Xperia p to ice cream sandwich and stick with it. OLD is GOLD!

What is your build version now after downgrading to ICS? I could not download 6.1.1.B.1.54 from the list which was best to me.. Please let me know quickly, I'm having the same **bleep** problem in JB.

Has a solution been found for the battery life problem after the Galexy S5 update?!

Andriod System and Andriod OS eating all of my battery causing in to drain 15%an hour after the update. Yes if have uninstalled all unnecessary apps and disable everything I can. Has a solution been found yet? I know Im not the only person who has had this problem from my research. Is there a fix?!

DONT do a Factory Reset. It will not help and is NOT necessary after an update.
Your issues are multi phased.
Go to Settings>Battery and see what is using the power
1) with a new Operating system, your phone will optimize the system and apps, this in itself can take a few days.
2) aside from that, you should try running the phone in Safe Mode as this loads only the core stuff necessary to run the phone.
3) if Safe Mode works then it Is one of your Third Party Apps and would be easy to track down
4) if it is one of the apps it is recommended that you uninstall them run the phone then start installing them slowly until you find the offending app
5) If running in Safe mode has NOT worked, then you need to deep dive a bit more. Open Settings>Apps and go to the ALL tab. Go in and start Force Stopping apps such as Camera, Sync etc...(the last Samsung update the Camera was frozen and would drain the battery pretty fast)
It is most likely a third party app causing the slowness. As a last resort you can bring your phone to a Best Buy and go to the Samsung Kiosk or Booth inside the store. These are manned by Samsung Employees and you would ask them to re flash your phone. They will plug it into their computer and load the software directly from their servers and not over the air. This would be the cleanest install you can get on these phones but it may not fix the issue if Samsung coded part of it incorrectly or if the camera app is not updated and is incompatible with Lollipop which is causing it to run continuously.

Weird problem after the last upgrade(10.4.8)

Hello all,
I am using a 1.66mhz MacMini with intelcoreduo. After the last upgrade
2weeks ago. I begun to encounter weird behaviors(those does not happen
all the time, but happens..) from my mac. I'll try to list those
behaviors below:
- trash can sometime can not empty, I have to open the thrashbin and
delete manaually by selecting each file to delete
-finder failing to open a new window.
- when i take screenshot, it only appears when i try to find it over spotlight
- and worst of them all, recent files downloaded on my desktop disappearing sometimes and only way to reach them ise search on finder, when spotlight finds it, it appears back again).
These are all so weird kinda behaviors. I am curious if any of you
having the same problems, or rather these problems has been allready
pointed.
Kind Regards,
alper,

I've seen some of those before but on a G4 Tower, so far never on my Intel Mac Mini.
I've seen screenshots not appear on the desktop until much later or when a new file is brought or created on the desktop. Likewise, I've seen the same behaviour with some files I've downloaded (to a specific downloads folder).
I remember stuffit 9 or 10 had a bug similar to this where when you expanded a an archive it was "empty" until you moved a new file into the folder or made a new file/folder in it, then it would show you the files that were actually in the expanded archive.
Try repairing your permissions and booting from your Mac OS X install disc and running disk repair.

OBIEE(11.1.1.6.8) dashboard prompts "Please Wait" Problem after the automatic upgrade of browser

Hi all,
We have a problem in OBIEE(11.1.1.6.8) dashboard prompts after the upgrade of Chrome browser.. The values of dashboard prompts are not shown to user ( with message "Please wait" ) We had this problem in Internet Explorer 10. So we had announced the users to have minimum browser versions Chrome 12+ , Firefox 17+ , Internet Explorer 9.x as its is declared in certification matrix. Now after upgrade (automatically)in Chrome version 30.0.1599.101 m , we have the same problem and the only working browser remaining is Mozilla Firefox. What should we do to prevent this without upgrade or patch ? Is there any workaround ?
Thanks ...

OBIEE problems with Chrome (update 30) plus patch

Syntax problem After the Upgrade to SCM 7.0

We are facing one problem during the upgrade process in the sandbox environment.
After the upgrade we have completed the SPAU corrections ,while doing the SPAU corrections we found that one function module is not in active mode. We have checked the syntax,problem is there. we have tried to retrieve to the older version. But there are some notes were implemented during the 4.1 version. Those notes are now appearing in the SPAU with question mark.
We have reverted all the notes but still the code is having syntax problem and the code is in the 4.1 version only.
Please tell me how to solve it...
Moderator message - Welcome to SCN.
But
Moderator message - Cross post locked(please pick one forum or the other)
Edited by: Rob Burbank on Nov 3, 2009 12:03 PM

Hello Bouchards,
Thank you for the question. You can find Frequent Locations under Settings > Privacy > Location Services > System Services:
You can find more information at the following link:
iOS 7: Understanding Location Services
http://support.apple.com/kb/HT5594
Thank you for using Apple Support Communities.
Best,
Sheila M.

Problem after the uninstall of windows with the bootcamp assistant!!!!

Similar Messages

Maybe you are looking for