Problem after todays AirPort and iTunes installation DEC 17

The Macintosh HD icon now doesn't display its name under the icon. When I open the finder, it has the icon on the sidebar but no name. I am still able to access everything fine and did a disk permission and verify disk and everything was fine. What the...?

Right click on the drive in Finder and select "get info". In the getinfo screen, Enter the Macintosh HD name in the "Name and Extension Window".
Regards

Similar Messages

Startup Problems after Installing QuickTime and ITunes 7.5 Update

I went to Software Update today and Installed the new ITunes 7.5 and Quicktime update and after it finished, it asked me to restart the computer. After I restarted:
-All Desktop icons keep flashing at the same time every 3 seconds
-The top white bar with the apple logo in the left corner keeps disappearing and reappearing at the same time as the icons do.
-Every program I open closes within 5 seconds of me opening it, i am only able to open them in the first place because my dock is the only thing that does not disappear.
-Finder and System Preferences are not accessible.
I do not have the System Restore/Tiger backup CD's with me, If these are needed, is there any way possible to use the ones that come with an Intel MacBook, just to maybe repair the hard drive or whatever may be needed to be done?

Hello,
If you mean ... is it ok to use system restore disks that came with an Intel MacBook on an iBook G4, no, that's not possible. Your iBookG4 is a PowerPC... the MacBook has an Intel based chip.
If you installed software such as iTunes and QT updates and these problems just started as a result it may be that your iBook drive hasn't enough available space. If you can, open any Finder window. The amount of free drive space is displayed there. 15% or less is bad. If this is indeed the case, then try to move important files off that drive.
If you can run Disk Utility.. it's in your Applications/Utilities folder. Launch Disk Utility. In the panel on the left, select MacintoshHD 10.4.x, make sure the First Aid tab is highlighted, then click Repair Disk Permissions... that might help. I'd suggest you Verify the disk for errors but you can't do that without the iBook system restore disks.
One other suggestion is to purchase either DiskWarrior available here: www.alsoft.com
or TechToolPro available here: www.micromat.com (I've used DiskWarrior successfully 3 times on my iBookG4!
I hope something I've suggested helps...
Carolyn

Problems with Mail, Safari and iTunes after updating to 10.5.6

Hi all,
after installing 10.5.6 I have problems with Mail, Safari and iTunes.
The time to open mails, websides and iTunes store is increasing dramatically since the update. If I open a webside parallel with Safari and Firefox, Safari needs minimum 15 times longer to open the complete side. Mails containing HTML-code also needs a long time to be opened. Tha same Problem with iTunes store. Connecting to the Store costs at least 30 - 40 seconds. And unfortunately for every iTunes store side I open. Its terrible
Any idea or workaroung to solve that problem?
Regards
Michael

First, run Disk Utility and repair permissions and then restart.
I installed the 10.5.6 Combo update. Sometimes things get "lost in the translation" when you use Software Update depending on your installation. Perhaps you can download 10.5.6 Combo from the website and install it from your desktop.

After install Leopard and iTunes 9

After install Leopard and iTunes 9, iTunes lock, when I connect my iPhone.
What can I do?

It was a permissions problem causing it.
Get Info and the Sharing And Permissions section did not show it up.
File Examiner (http://www.gideonsoftworks.com/filexaminer.html) shoed the problem with the permissions and allowed me to give the files the correct permissions again.
From what I have been reading, the whole permission 'system' under Leopard seems to be a bit screwy anway. File Examiner seems good in that it shows you the 'real' file system permissions and not the 'user friendly' meaningless name Leopard gives.

Hi anyone having a problem with windows 7 and itunes

Hi has anyone had a problem with windows 7n and Itunes...My Itunes was working now wont open says files missing reinstall...which I have done several times also other programs that were working now have error message your side by side configuration isnt correct any ideas!!!

Yes, I am also having trouble with my windows 7n. I tried to install the download but it didn't have 32 bit for my computer and I don't think it will help me see my phone on my external devices. I can't transfer my photos. Any help would be appreciated.

I have had nothing but problems after downloading Lion and turning on ICloud. Can anyone tell if I can delete photos from Photostream and if not why not! it is infuriating

I have had nothing but problems after downloading Lion and turning on ICloud. Can anyone tell if I can delete photos from Photostream and if not why not! it is infuriating

PhotoStream is purely a conduit for transferring pictures added to or taken on one device onto all the others seamlessly. Photos are held there only for 30 days. There is no way of accessing, viewing or deleting individual photos; you can reset the entire Photostream, erasing everything.
http://support.apple.com/kb/HT4890

Sync problem on iPhone4 IOS5 and iTunes 10.5: Sync service failed to start

After painful upgrade to IOS 5.0 on my iPone 4 which suffer from er 3014 unt I do full restore in other computer. Now two new problems cropped up again:
A.
When I sync IPhone with iTunes, the sync process started and freeze at "waing f sync service to start" and for 5 minutes or so, it end up with a dialog stated that the iPhone could not be synced because sync service failed to start
To remedy, I have to click t start Sync again, and thios time, it will be completed.
To solve tjhis, I have done the following, and the probelm still persist:
a. Reinstal,l to repair iTunes
b. Delete the Lockup folder
c. Reset sync history
d. reboot iPhone
All cannot solve the problem. Help please, how to solve this problem?
Also, when I backup my iPhone, it freeze at "Backing up iPhone" fr about 10-15 minutes, then start backup, until nearly finished, then it restart backup process again by itself, and again, freezing at "Backing up iPhone" for another 5 minutes, then it start backup and complete. I check the backup time in Preferences, it's correct.
To solve this, I delete the backup, and start new backup, the process went OK. But when I start backup again, the above symptom (backing up, and restart backup again to complete) persist
I have quite a rough experiences with iTunes-iPhone-iPad sync and backup all the times. Can the sync and backup process mad better and real trouble free Apple?
Help and suggestion please. I sync iPhone and iPad2 with WIndow XP PC. iPad2 do not have problem. The problem is with iPhone4 IOS 5 32 GB (less than 2 GB free space on iPhone remains)

I have very similar problems with my brand new iPhone and iTunes. iTunes is virtually unusable even after multiple installs, uniinstalls, and reinstalls. Sync fails silently. Drop-down menus won't stay visible long enough to click any options. Phone-support blames it on the fact that I use Windows XP however the iTunes page says right there: "iTunes 10.5 for Windows XP, Vista or Windows 7". The only program I have problems with is iTunes.
He said I have to revert to iOS 4 but he also said he thought that was impossible. What does the OS on my phone have to do with the behavior of iTunes running on my computer? iTunes crashed and had failures both before and after I updated to iOS 5. Typical bad tech support just like every other company. I thought Apple was different. Apple really stepped in it this time and it stinks. I've seen a huge number of new problem reports here and elsewhere.

Xfce shortcut problems after today's updates

Xfce shortcuts defined in keyboard settings doesn't work at all, even the default ones like alt+f2. They were still working in the morning, but they stopped after today's updates. I think it has something to do with kbd package, but I can't honestly say.
Anyone experiencing something similar?

Most probably you need to logof, go into the console and wipe anything related to xfce on your home folder and start xfce again. Its a pain to get everything as you want again but at least you avoid problems like the one you have now.
You may also see a problem with the icons, just pull tango-icon-theme and all will be well.

Problems After Updating Airport Extreme Software & Firmware

Lost wireless connection to my printer while attempting printing from either desktop or laptop & when I tried to re-establish/update the wireless settings, I received message that new versions of software & firmware were available for my Airport Extreme. After I downloaded & installed both of these, I could no longer connect at all to the Airport Extreme. When I used the Airport Assistant to try to solve problems, it said airport was out of range. Also only got flashing amber light on Airport Extreme no matter how many times I tried to reset it and DSL modem (went through complete re-connect/re-install of both Airport Extreme and DSL modem hardware). I switched to an extra Airport Express I have and now everything is backing working again. Any known problems with either the latest Airport Extreme software (Airport Utility 5.3.2) or firmware (version 7.3.2 I think)?

Firstly, on the Mac you use to configure the AEB, Repair Permissions - /Applications/Utilities/Disk Utility.app. Start Disk Utility, select your HD and click on Repair Permissions. When finished, quit Disk Utility and then restart your computer.
I see you are using 10.4.11, so the steps in Part B may be a little different (this is for 10.5.x).
Use this procedure to setup your network again:
A. Setup the 'Main' Base Station
1. Do a factory reset of your AEB (main), then turnoff the DSL Modem and the AEB (main) - leave off for at least 5 minutes to allow servers to reset.
2. Check that ethernet cables are connected properly:
- DSL Modem > AEB (main) WAN port;
- AEB (main) ethernet port > Mac computer running OS X 10.5.x.
3. Power-on DSL Modem and wait for it to initialise.
4. Power-on the AEB (main) and start your Mac computer.
5. Open AirPort Utility and select the AEB (main) in the LH pane. Click 'Continue' and give the AEB (main) a name and an admin password (twice). Click 'Continue'.
6. Select 'I don't have a wireless network and I want to create one', click Continue.
7. Give your network a name, select WPA/WPA2 Personal and insert the wireless network password (twice) - use 13 alpha/numeric characters for password. Tick 'Remember this password in my keychain'. Click 'Continue'.
8. Select 'I connect to the Internet with a DSL or cable modem using DHCP'. Click 'Continue'.
9. Click 'Update' and wait for the AEB (main) to restart.
10. Disconnect the ethernet cable between your Mac and the AEB (main).
B. Setup Client computer
1. Open System Preferences/Network/AirPort.
2. Against 'Network Name:' select your network (the name you gave it at A7).
3. Click 'Advanced' and select TCP/IP. Against 'Configure IPv4:' select 'Using DHCP', then click 'OK'.
4. Click 'Apply' and exit System Preferences.

Hi i have problem after plug-in to itunes my tough screen is stucke whot shuld i do?

Hi
I have problem after plug-in itune my iphone is stuck the screen is only showing itune and cable. I can't turn off, whot should I do?

My iphone is showing the same thing (i think) on the screen that I plug into itunes. Itunes is saying that I need to restore my iphone. Can I avoid restoring the iphone?

Problem after installing 6.03 iTunes- Will not start up...please help!!!!!

I recently gave into the decision of installing the new iTunes update to 6.03 Everything was working fine, but I thought I should upgrade. Now I cannot start iTunes. When I click on the icon it shows an hourglass for about 2 seconds and then goes away. Ive tried reinstalling, but to no avail. If anybody knows what to do it'd be GREATLY appreciated. Thanks for all of your support! J

I am also having a problem opening iTunes after installing the latest version, 6.03. Every now and then, it will open after I do some troubleshooting, but the problem persists the next time I try to open it. Once I opened iTunes in safe mode and then restarted in the normal mode and iTunes started properly. Another time, I took off the iTunes Help application from my start up items under my account and I was able to open iTunes. Another time, I opened iTunes from the actual data file and I was able to open iTunes. But as soon as I close iTunes and try to open it up again the next time around, it does not respond. What is going on? How can I get rid of 6.03 and go back to the previous version without losing my music?

Missing iCal calenders after updating Quicktime and iTunes

I updated Quicktime and iTunes yesterday and when I tried to open my calenders in iCal this morning there was nothing !
Has anyone got any ideas of what happened here and how to avoid it in the future. I do have my iCal events calenders on my iPod so can I transfer them back into iCal on my PB ?
Powerbook G4 1,25MHZ, OS 10.3.7, 2GB RAM, Superdrive, 80GB H/D
PBG4 1.25MHZ Mac OS X (10.3.7)

Hi Mylenium:
Just as an additional info, when I stated "Apple Forum" I was referring to a suggestion made and publish there by one of the Apple Support guys.
Thanks for your suggestions. As I stated before, I put the DLL back to the "original" folder, re-started the sytems but I am still getting the AE error regarding a "missing entry on the SQLite3.dll".
After putting back such file to the original folder now I am getting the "same inital error" I got after the update ONLY in iTunes. I have not dare to move anything with my iPod yet. I do not want the whole thing to become worst that already is.
In regards to your nest suggestion "...Another thing I can think of is that you might actually need to unregister the DLL via regsrv, then re-register it somehow to re-establish the proper hooks. Still, quite odd....."..
I wonder if you cand provide me with the necessary steps to attempt this. I have no experience working/fixing DLL's.
Thanks and regards,

Synchronization problem between the iPhone and iTunes

Hello
How do I solve this problem of synchronization between the iPhone and iTunes?
He always gives me this err:
Problem Event Name: APPCRASH
Application Name: SyncServer.exe
Application Version: 17.641.8.1
Application Timestamp: 4c0ed8cb
Name of the default module: CoreFoundation.dll
Default Module Version: 1.550.26.13
Module Timestamp default 4bff35d2
Exception code: c0000005
Shifting the exception 00043dd9
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1036
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Details No. 4: 0a9e372d3b4ad19135b953a78882e789
Also another error:
Problem Event Name: APPCRASH
Application Name: AppleMobileDeviceHelper.exe
Application version: 17.758.0.68
Application Timestamp: 4c0ed8cb
Name of the default module: CoreFoundation.dll
Default Module Version: 1.550.26.13
Module Timestamp default 4bff35d2
Exception code: c0000005
Shifting the exception 00043dd9
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1036
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Details No. 4: 0a9e372d3b4ad19135b953a78882e789
Thank you in advance for help.
<Config> Windows 7 / iTunes 9.2 / iPhone 3G 16 GB>

http://discussions.apple.com/thread.jspa?threadID=2470826&tstart=60
A discussion a little way down send you to a website charlesgates?? i think and he will walk you through your problem.
Corefoundation.dll is your issue. Good LUCK!!

I have mulitple copies appearing on my ipad after using icloud and itunes match, how do I get only 1 copy to appear?

I am new to the Ipad, I just got the Ipad with retina display in and only have a 16gb memory. I wanted to use Icloud for my music and other items, but when I started using Icloud and Itunes match, my Ipad has up to 3 of the same song listed on the song list. and will repeat when I am listening to my music. I was wondering how I can get those multiple copies go away to just 1.

Hi,
Read this user tip Recover your iTunes library from your iPod or iOS device
Does it help?
Jim

Problems after an "erase and install"

Hi,
I recently had problems with my mac and i needed to do an "erase and install" with the original Mac OS cd. Perhaps, before loosing all of my data, i saved it on an other macbook.
When i re-install my Mac Os software and all of my data (pictures included) i've just realize that i've lost the software iphoto 8 that came originaly with my computer.
When i bought the computer about a year ago, there was no cd of iLife or the iPhoto software with it.
How can I have iPhoto back?
Thanks
Fred

Fred
It's on the System Restore disks that came with your Mac. Opt to install "Bundled Applications Only".
Regards
TD

Problem after todays AirPort and iTunes installation DEC 17

Similar Messages

Maybe you are looking for