Problem after transporting

Hi Experts,
My scenario involving File -> BAPI (synchronous) was working fine in the development server but now in the test server when i check the file is picked but i dont think it has reached my BPM. When i click on PE in sxmb_moni i get a screen and in it i find an entry saying "status: waiting because of e" ....
Anybody got any clue whats happening ?
Regards,
Shabarish.

Hi JK,
I already ran these checks .... in BPM the status is 0.
I dint find any entries in SWWL also and the cache content is upto date.
The file is picked but at the outbound status i see a red flag. When i clicked on PE it usually takes us to a Workflow chart but in this case a new screen is what i see which i have never encountered before. It says Event Queue browser (the tcode of the screen reads SWEQBROWSER) and below it says
Object type : ZXI_PROXY_MTINVOICERECEIP_0001
Event: received
followed by Key and Receiver Type with the status as Waiting because of e.
I have no clue what this means.
~ShaBz~

Similar Messages

CRM Datasource Problem After Transport

Hi,
I am using CRM datasource 0CRM_SRV_PROCESS_H in CRM 5.0. The datasouce is installed through RSA5 and enhanced successfully in CRM Development System. Its BWA metadata is also activated automatically(as i am on CRM 5.0). I have transported it successfully to CRM Quality system without any warnings/errors. But when i check it in T-Code BWA5, its "Active" flag is not checked. And when i check in RSA3, sytem is throwing error message " Errors Occurred During Extraction". I can see the datasouce in RSA6 in Quality system with its enhanced fields.
How can i make the "Active" flag checked in CRM Quality system? Or How can i activate BWA metadata in CRM Quality system?
Urgent response would be appreciated.
Regards,
Prasad

Definitely this is not related to replication. Some times this error 'Error in extraction" is related to SMOXHEAD table entry.
Try following steps..
Copy Smoxhead entry CRD> se16 > SMOXHEAD > DataSource > select the resulting line, copy
se16 > SMOXHEAD_S > DataSource > paste
Table Entry > Transport Entries of SMOXHEAD_S
After transport try running RSA3. It shall be fine.
Regards,
Assgn pts if helpful.

Enhancement Spot Activation problem after Transport

Hi All,
We are implementing enhancement spot as per certain requirement. Everything is fine in the deveopment system. But once we move the object to quality system the program execution is not going into the implementation, although Enhancement spot implemention is available in Quality.
Currently we are going into Quality system and activating Enhancement spot manually, even thoug this solves the problem we are worried about the production system. Because we wont be having access to production system.
Has anyone faced these kind of scenarios?
Regards,
Antony

I am facing the same issue. However I learnt that we might need to use Adjusting Tool from Object Navigator/SE80 on the implementation before transporting.

Problem after transport to Quality system

Hi,
I've done the transport of my SWCV from DEV to QLD and everything works fine. I've check all the components in the IR and ID and make the necessary adjustments. But when i try to realize a test from RW with my interface all that i can get is a red box with an exclamation point inside and above this a red cross line and no message appears in XI monitor. Also i've look at Message monitoring and no message avaiable either for Integration Engine or Adapter Engine. Although when i test my interface in IR using the option Tools/Test configuration I get the following error:
Receiver Determination
Internal Error
HTTP connection to ABAP Runtime failed. Error: 403 Forbidden URL: http://ed18tci1f.appl.edinfor.pt:8078/sap/xi/simulation?sap-client= User: XIDIRUSER
Can anyone provide me some help???
Thanks in advance,
JMMatos

Hi Jose,
Please take a look at this thread..
HTTP connection to ABAP Runtime failed
cheers,
Prashanth

Problem with theme service after transport to QAS

Hi,
when i click the link on BSP page inside portal, iam getting following error. the link is working outside portal.
its working on dev r/3 and portal. i got the problem after transport of the package to QAS, i checked all the services and alla are active.
http://XXXXXXX:7035/irj/portalapps/com.sap.portal.design.portaldesigndata/themes/portal/main_theme/controls call was terminated because the corresponding service is not available.
Theme is active and its applied for every user, i have 30 BSP pages in portal and only this page is showing this error, this page will be launched as popup from portal.
Thanks in Advance,
Damodhar.

SQL> exec dbms_xdb.sethttpport(8080);
BEGIN dbms_xdb.sethttpport(8080); END;
ERROR at line 1:
ORA-06550: line 1, column 7:
PLS-00201: identifier 'DBMS_XDB' must be declared
ORA-06550: line 1, column 7:
PL/SQL: Statement ignored
another one...........

Planning layout can no longer be displayed after transport

Hello everybody,
I have transported a planning area with all levels and so on.
I have several Manual Planning Layouts with key figures in data columns and rows defined individually.
I am using defined values of G/L Account characteristics in Lead column, each row is defined by a G/L Account number of a specific Chart of accounts predefined in the Header.
I load my G/L Account numbers with the same flat file in Development system and in Production system but after transport the layout cannot be displayed.
If I maintained G/L account characteristic in RSA1 on production system, I find all the account numbers for my Chart of accounts but if I try to define a value of G/L Account in my planning package, I do not find any values on my Chart of Account???
Could you help me??
Regards,
RaMa

Switch cube Load <> Planning solves the problem...
Thanks !
RaMa

Problem during transport

Dear All,
Now i meet a problem during transport my ABAP in dev to prod server. Not sure is BASIS or my problem.
The error is "Request after end mark"
One more question is for the transaction code STMS, the status for production server should be LOCK or IMPORT QUEUE IS OPEN? If it should be IMPORT QUEUE IS OPEN, how i going to do it cos now our status is LOCK?
Thanks for ur help....
regards;
jee

Hi,
The "Request after end mark" will be displayed due to the following:
Requests after the end mark are not imported during the next import. The end mark is automatically deleted only when the next import has completely ended. Afterwards, the requests can be imported. You can see the legend information in the following website:
http://help.sap.com/saphelp_nw04/helpdata/en/44/b4a3847acc11d1899e0000e829fbbd/content.htm
However, as per your questions I understand that the TMS configuration is not proper. Can you check the r3trans and the transport routes/layers again and see what is missing?

Problems when transporting from DEV to PROD

Hi experts, I have problem during transport from DEV to Production.
We have a DEV, QAS and PRODUCTION and we have transport from DEV to QAS very well. But when we transport from DEV to PROD, recibe an error like:
After beginning the import method RS_IOBC_AFTER_IMPORT for Objects types IOBC mode (activation)
Failed to verify catalog InfoObjetos ZCM_UNIMET_CHA01
The InfoObjeto ZCM_RENC version does not exist in active
The InfoObjeto ZCM_RENM version does not exist in active
1.The Query is: Wy if the transport go OK from DE to QAS, then The transport from DEV to PROD terminated in error?.
2. There are any items to check in production before to transport?.
PD: All of the Objects in DEV are in ACTIVE status
Tanks,
Ramon Sulvaran

The transport ended in QAS with error code (4) and ended in Producion with error code (8), the detal of the error in Production begin with:
Home After import RS_ODSO_AFTER_IMPORT method for type (s) ODSO object (trigger mode)
Activation of DataStore objects of type Object
Check DataStore objects of type Object
DataStore Object Verification ZCM_DS01
The DataStore object is consistent ZCM_DS01
Burning the DataStore objects of type Object
Internal activation (DataStore Object)
Pretreatment / Creating DDIC objects to DataStore Object ZCM_DS01
Table / View / BIC/AZCM_DS0100 (type 0) DataStore object recorded ZCM_DS01
Create / Delete the indexes for the active table
Table / View / BIC/AZCM_DS0140 (type 4) recorded ZCM_DS01 DataStore object
Type of table / BIC/WAZCM_DS0100 recorded
Table / View / BIC/VZCM_DS012 (type VIEW) recorded ZCM_DS01 DataStore object
Log ZCM_DS01 DataStore object changes was recorded successfully
Writing Object Catalog entries (Tadiran)
He has written the object TABL / BIC/AZCM_DS0100 in catálgo objects (Tadiran)
He has written the object TABL / BIC/AZCM_DS0140 in catálgo objects (Tadiran)
He has written the object TABL / BIC/VZCM_DS012 in catálgo objects (Tadiran)
He has written the object TTYP / BIC/WAZCM_DS0100 in catálgo objects (Tadiran)
Activate all ABAP Dictionary objects (5):
Error / Warning in progr.activación Dict., Detailed log> Detail
Activate table / BIC/AZCM_DS0100.
Lack of expansion to the category table
Lack of extension category for include or subtype .......
When i go to BW Production to check teh object. I see tha the Object was create but in inactive status (grey color). When y Try to Actiavate it y see the error: Error/ Warning in program Activation Dcit. Detailed Log -> Detail

Problem in transporting Transformations

Hi,
We are transporting transformations to our production system (BW Patch
15) for the first time after the 7.0 upgrade. We are seeing the
following error message in the transports.
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type
(s) TRFN (Activation Mode)
No rule
exists
Transformation : Rule 1 could not be imported
Message no. RSTRAN401
The transports went fine in our testing system. We have the "Conversion
of source system names after transport" mapping in the production
systems.
The transformation that got terminated has still the development system
reference in the BW production system. The mapping didnu2019t take place
during the transport. We searched for OSS notes for RSTRAN401 and applied some OSS notes.
But still we have the same problem. Please advise. Thanks.
Thanks.
Raj.

Hi,
Your Request not contains the required Routines/Obejcts.
See SAP Notes:
Note 1377567 - Handling of RSTRAN401 as an error in the transport
Note 1377342 - Check for consistency of transformations in the transport
Note 1145554 - BI7.0 (SP 18) OBJECTS_OBJREF_NOT_ASSIGNED during transport
Note 1412414 - (SP24) Content is not generated/transport errors
Thanks
Reddy

Problem in transporting WPC Content

Hi,
I am facing problem in transporting WPC Content from server1 to server2. After transport the webpages are not displaying the contents. Webpages are showing empty layouts. I have done the layout configurations. Webpages are cotaining iViews and Html contents from KM . The webpages are not allowing to edit. Its very urgent.Help me to get through this.
Regards,
Mallini.V

Hi MaliniV,
Before you transfer the WPC content from one server to another, you need to be very careful about the settings and configurations. Did deply the WPC on the other server ? Did u do any custom page layouts in development server ? if yes, you need to do the same in production server as well. if not , it won't work.
I too had the same problem before. but ! after checking all these , I corrected them.
I hope this will help u.
Thanks
Suresh

Problem in transporting authorization object

Hi,
I am facing a problem in transporting the authorization object. We have an existing cube in development and production. In production the object has 3 authorization objects checked. Now I want to change the authorization object assignment in my cube. So I changed the assignment in the development, but when I tried to transport the authorization object it collected all the cubes where the authorization object is used.
I want to transport only the authorization object associated with that cube, not all. I understand that logically if we are transporting the authorization object from RSSM, it takes all the assignments. But I don't want to do that because there may be some inconsistencies between the system.
Can you tell me weather we have any other way, so that the authorization object is transported only for one particular cube assignment not all.
Thanks in advance
Prashant

Hi,
I tried that but not getting anything.
Can you please tell me the steps.
Steps I have done are as follows.
1. Go to RSSM and select the authorization object.
2. We have a button which says transport authorization object. I clicked on that.
3. I got a list of all the authorization objects there. I selected my authorization objects and clicked on Transfer Object button.
4. Then I get the hierarchy authorization objects.
5. After that I selected a request and everything is included in that request. I didn't got your above mentioned option.
Do you want me to go to the table RSSTOBJDIR and delete all the other entries??
It would be great if you can tell me the steps to do that.
Thanks in advance
prashant

Problem in transporting the text elements for user exit EXIT_SAPLV09A_002

Hi All,
I am facing a problem in transporting the text element (text symbol) for the exit EXIT_SAPLV09A_002. It is implemented and transported but the text elements are not transported and even if I try to delete them and then create them again, on activation it doesn't prompts for TO and it version its shows it as local object. I have tried to manually assign the TO by using limu as id of program and rept as type and SAPLXV09 as the name of the object but still it doesn't allows as an error message comes prompting local object cannot be assigned to TO. Kindly suggest solution this problem.
Regards,
Sachin
Edited by: Sachin Dangayach on Nov 15, 2010 4:21 PM

Hello ,
In the Quality after you run the report check in the layout option>display text elements> variables and check what value is displayed for the use exit variable , if it is correct then problem may be in the selection you gave when you run the report if the user exit variable value is wrong , then set a break point in the code and run the report from rsrt and check where the error is.
hope it is clear
assign points if useful

Problem in transports!! Please help

Hello BW Gurus,
I am havinga major problem with transports.The Client had separate HR box as the source system for HR Objects.
Since the HR box is obsolete, we assigned SAP R3 as the new source system to infosources and activated them.
I created a transport by collecting at the transfer rule level. The transport is failing saying it cant fing the SAP source system.
Post-import methods for change/transport request: BWDK960528
Follow-up action RS_AFTER_IMPORT for IOBJ L started at 20060203130629
Start of the after-import method for object type R3TR APCO (Activation Mode)
Start of the after-import method for object type R3TR IOBJ (Activation Mode)
Characteristic 0LANGU: Lower case makes selection of char. values difficult
Start of the after-import method for object type R3TR ISFS (Activation Mode)
Source system SAPTDV210 does not exist
No mapping defined for source system XXXHRP210
RFC connection to source system XXXHRP210 is damaged ==> no Metadata upload
Source system SAPTDV210 does not exist
Start of the after-import method for object type R3TR ISMP (Activation Mode)
Source system SAPTDV210 does not exist
No mapping defined for source system XXXHRP210
Source system SAPTDV210 does not exist
Start of the after-import method for object type R3TR ISTS (Activation Mode)
There is no DataSource with these attributes
Reference to transfer structure 0ACTIONREAS_TEXT_BA not available. No activation possible.
There is no DataSource with these attributes
Reference to transfer structure 0ACTIONTYPE_TEXT_BA not available. No activation possible.

hi Simmi,
seems several errors
1. first you have to do source system mapping in your TARGET system (or you have to do correction since you change to new source system), from the log, i assume SAPTDV210 is the new SAP assigned (in bw dev/source), and e.g your target is SAPTQA999 then in SAPTQA999 do rsa1->tools->source system mapping, and fill up SAPTDV210 in 'orgsrc..'(first column) and SAPTQA999 in 'trgsrc..'(last column?) and save.
2. XXXHRP210 ? if this system still exist, right click this source system and 'restore'.
3. 0ACTIONREAS and 0ACTIONTYPE datasource doesn't exist in target system, in target system have you replicate from r/3 ?
if problem not solve in one go, would help if you specify bw dev name and target name, also r/3 new and old.
hope this helps.

After transporting the TTF is not been used

Hi all,
I have installed a true type font (se73). After the installation I use it on a smart form style and it is shown ok.
The problem is that after transporting it to integration, the forms are not using the one I installed but a standard instead.
Hints: - all was on the same transport order and it has been transported ok.
- everything is active
- I have allready read the note 421518 and i have executed the report RSTXDELL

Are you checking by print preview only, or by printing?
Which device type is defined for your printer? (SPAD transaction, display the output device)
If the device type is a custom one (Y* or Z*), could you tell us what sapscript (OTF) driver it uses? (SPAD, double-click the device type).
The font conversion algorithm is based on the fonts allowed for each device type (they are called "printer fonts", and are maintained via SE73 transaction). You may verify which font conversion is done via SE73 transaction, choose "printer fonts", double-click the device type, and click the "font conversion" button.
To make sure, you may also see the converted font after the spool has been generated (the font conversion is applied before the spool is generated): display the spool in raw or hexadecimal view in SP01 transaction, the font lines are starting with FT characters followed by the converted printer font name.
Could you tell us what are the results of the font conversion in SE73 for your device type?

Alert rules not displaying correctly in the RWB after transporting to QA

Hi Experts,
After transporting the alert rules from DEV to QA, the rules are not correctly displayed in the RWB in QA e.g. a star (*) is displayed in all the fields instead of the filter values which I have entered such as the "Sender Party"; "Sender Interface" etc. I am also not able to manually change the values in the RWB in QA anymore because the values are greyed out.
Strangely enough, the rules are correctly displayed inside the SXMSALERTRULES table in QA.
Do you perhaps know how to solve this issue so that the rules are also correclty displayed in the RWB after transporting?
Thanks and regards
Brendon

Having the same problem and looking for fix...

Problem after transporting

Similar Messages

Maybe you are looking for