Problem after uninstall

after uninstall i have a problem,in the list of periphears i have a !yellow that says :"Controller del bus di gestione sistema" that i can traslate like this "Bus controller of the management system" ...it looks there is a driver that is not recognized.
i try to reinstall the last pc nokia suite,and using a irda port everything is ok with the phone but the messager error remains.
I try to clean the system with the nokia utility but nothing.
I try to reinstall also cable driver (non neccessary beacuse i used irda but before i used it...
i don't know,what drive is needed or how to remove...any ideas?
windows xp sp2 italian.
Gianni

ok,i have loaded a backup of the system at a point before to uninstal,
in the order i have now unistalled again:
pc suite
another nokia program
cable driver
i have rebboted the pc and at the restart win xp looks for a driver of a "ghost" drivers...
so the problem is on the PCsuite.
The same problem has got a mine friends,he had problems in connections with his nokia,so he unistalled pc suite and he retryed to install,and the problem was the same: a ghost periphear,driver needed but what driver???also in his computer at the end,aftre reinstall pcsuite (the last,same windows) the phone went well and there are not problems using pcsuite but the !yellow remains.
what cani i do???id like to understand what driver is missing,or how to remove manually with reg edit the key on the regitry that shows !yellow.
Thanks
Night
Gianni

Similar Messages

CS6 Installing problem after uninstalling (exit code 34)

Exit Code: 34
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 0 error(s), 0 warning(s)
FATAL: Payload '{11C0657F-2BD4-4CBC-87F3-9455DC91886E} Recommended Common Fonts Installation x64 6.0.98.0' information not found in Media_db.
After uninstalling the beta trial version I get this error when trying to reinstall,
can anyone help?
Would be very appreciated!

Hi,
Could you please share your meeting time preference and time zone so that we can setup a connect session to resolve the issue.
Send me the details at [email protected]
Regards,
Ashutosh

Problem after uninstalling Firefox 4

I installed Firefox 4 and learned it was not compatible with Skype. So I uninstalled Firefox and now my internet connection is messed up badly...when I click on desktop shortcuts I'd made before, I'm told they're not registered. I want to install the earlier Firefox version. Is this possible???

The problem is Firefox 4. I have two PC's with one XP OS, the other Win7.
Only problem on XP is the search drop down options do not work when clicked on. I too have nvidia drivers on this PC.
However on the Win7 OS, with MSE and MS firewall, the PC freezes regularly and is unresponsive for several minutes.
Mozilla recommend running browser in safe mode after turning off all add ons and then reintroducing one by one until the culprit is discovered!! People have tried doing as suggested without finding a solution.
You have probably noticed there are numerous topics about this problem in Google. What is clear is that people have various different set ups but that the one connecting factor is the change to Firefox 4.
Instead of telling us what the problem might be with our set ups, and asking us to waste substantial time on work a rounds, perhaps Mozilla should look at Firefox 4 and tell us why it is causing the problems?

Problems after uninstalling Acrobat 10

I recently installed and then uninstalled a trial version of Acrobat 10. Now when I try to make a pdf in Acrobat 9, I get an error message that the distiller cannot find a file in an Acrobat 10 folder (which has been deleted). How can I get the distiller in 9 to work again. I already tried uninstalling and re-installing it, as well as running it in repair mode. Nothing seems to work.

Sorry to hear about the trouble. We've heard some reports of similar issues with files not opening after the 11.0.01/10.1.5/9.5.3 updates were installed. I would suggest uninstalling Acrobat, the reinstalling and patching up to 10.1.4 again as an immediate solution.
To help us figure out what may be going with your particular files, could you open one in Acrobat and choose File > Properties. I'd like to know what it says next to the PDFProducer and Application lines.
-David

Problems after uninstall Safari 4 beta...

I just uninstall Safari 4 today with the uninstall package. And after reboot, Safari (3 i suppose?) doesn't open anymore but, not only Safari, Mail too,"Mises à jour" too,...
How can i fix it?

Some precisions.
I create another user account and it works on it.

Problems after uninstalling some applications

Hello,
I have decided to uninstal some old and useless applications to free some room for the new ones. I used CleanMyMac, and some apps were just moved to Trash.
It seems, I accidentally deleted one or more system files. Now some important applications do not want to work, e.g. App Store, Google Drive, Pages, etc.
As App Store is in this list, I can't update the system.
How can I restore my OS 10.9.1 or the brocken applications?

Му iMac is too old to be modified.
Outfits like Other World Computing (OWC) offer inexpensive upgrade packages for virtually any current Mac.
http://eshop.macsales.com/shop/internal_storage/hard_drives_and_SSD
P.S., They also have instructional videos.

Problems before and after Uninstall and re-install CS4

I went ahead and uninstalled and re-installed CS4 because of freeze ups and other difficulties. Program After Effects is now crashing - see attachment. There is also a problem with an importer plugin (I think) may be related. I can't tell. I have not tried any other projects. I did however, disconnect the Matrox MX02 Mini, but still had problems. The MX02 is now re-connected.
I wonder if installing CS4 on top of CS3 is an issue? I remember having a similar problem goiing from CS2 to CS3. I had to downloader a cleaning utility from Adobe (I think) to remove every bit of CS2 and then run CCleaner.
It's my own fault - trying to upgrade software and hardware at the same time. It's hard to isolate. For now, I'l just have to do with Premiere since it is working. But, I'd sure like to know what's going on.

Did you re-install all other Adobe products as well? If not, then that may be the problem. Uninstalling/ reinstalling only one of them messes with MediaCore and certain otehr functions. The quick fix is to download the manuala (!) update packages for After Effects, Premiere Pro/Encore and Adobe Media Encoder from the support pages and run them. This usually bends things in place. If not, then you will probably have to uninstall again, this time including every Adobe app, use the CS4 Clean Script and reinstall.
Mylenium

Error when opening itunes : iTunes has stopped working ''A problem caused the program to stop working correctly''. When I repaired damaged files the problem still exists and also after uninstalling and redownloading and installing itunes. I have windows 8

Error when opening iTunes : iTunes has stopped working '' A problem caused the program to stop working correctly''.
When I repaired damaged files the problem still exists and also after uninstalling, redownloading and reinstalling iTunes.
My pc is working with windos 8.
Is there a solution?

Hey there Rodney274,
It sounds like you are getting an error from iTunes when you launch it. I would try the troubleshooting in this article named:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Start with troubleshooting for 3rd party plug ins section, then the rest of the article if needed:
Start iTunes in Safe Mode
Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
Click Continue.
See if the issue you're experiencing persists in Safe Mode.
If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
Thank you for using Apple Support Communities.
Take care,
Sterling

My Adobe Acrobat 9 Standard stopped working after I performed an msconfig. I get the following message: "You cannot use this product at this time. You must repair the problem by uninstalling and reinstalling this product..." I installed this on Jan. 7, 20

My Adobe Acrobat 9 Standard stopped working after I performed an msconfig. I get the following message: "You cannot use this product at this time. You must repair the problem by uninstalling and reinstalling this product..." I installed this on Jan. 7, 2010 and I have since misplaced the disk.
How do I fix the problem?

Hi Ali,
You can download Acrobat 9 Std. from: https://files.acrobat.com/a/preview/8d640488-4a92-4f7d-b50b-d8eb7f96bff8
and reinstall the software.
Regards,
Rave

Multiple Samsung Stratosphere problems after FF1 update

There have been multiple posts on various issues users have found after the recent Stratopshere FF1 update. Some were replys to older posts and some only touched on a single issue. I wanted to consolodate into one thread, and hopefully get teh attention of Verizon to maybe reply here.
For reference, a lot has been discuss here --> https://community.verizonwireless.com/message/874446
Summary: Verizon and Samsung have finally updated the Stratosphere almost 1 year after release. This updated the phone from Android 2.3.5 to Android 2.3.6. Going by filename, this is known as the FF1 update. This update went live at the end of August 2012, and most users were upgraded before mid September 2012.
There were some noticable changes in this update:
-Lock screen has changed. The puzzle piece and glass lock options have been removed. New options have been added, such as facial recognition unlock.
-Call answering screen has changed, introducing the option to ignore call with a message.
-Camera now has digital zoom ability.
-Ability to uninstall the 2 games the phone comes with (Need for Speed and Lets Golf)
-Phone icon has changed ever so slightly
-Wifi icon now included up and down arrows to indicate data is being sent or recieved
-Wallpaper no longer "stretches" over multiple screens - ie, it no longer scrolls as you move from screen to screen
-The visual voicemail app has been improved (I have personally not used this feature)
-Callback number is now supported in text / picture messages
-Android core OS updated from 2.3.5 to 2.3.6 (both versions are still Gingerbread)
-Update to how the device deals with the end of scrolling. It used to rubber-band bounce back, now it will just give a green bar and expand the bar as you scroll. (I cannot fault Samsung for this change as this was at teh core of an Apple lawsuit and has been changed in newer versions of Android.)
-(I am sure there are more. please list any others you may have noticed)
I have found some problems, and others have confirmed that this is (at least) somewhat widespread:
-The biggest problem is with wifi connectivity. Upon an initial connection to wifi, everything works great. After somewhere between 15minutes and 2 hours, problems start happening. Its as if the wifi keeps hanging or reconnecting. Download speeds (tested with the SpeedTest.com app) slow to about one third of normal. Apps like Facebook that require a constant connection will just time out.
-It appears the signal strength for 3g and 4g connections is lower. There are places where I used to get a 4g connection, and now I only get 3g. Some palces I fall back to just 2g digital.
Another minor issue i found was with text messages. When you reply to a message, it no longer automatically focuses the text in the input box. You have to first click into the box to start typing. Not a huge deal, but one more step to take over and over. Minor annoyence.
At my house, I struggle to get a 3g or 4g signal. I depend on wifi for my data connection. So with the wifi connection problem introduced by teh FF1 update, my phone is somewhat useless to me now while at home. Here are teh troubleshooting steps I have been through so far to attempt to fix the wifi problem:
-Complete factory reset on my phone. (did not help)
-Pull battery and SIM card out of phone for 15 minutes. (did not help)
-Went to a Verizon store. The guy at the store was helpful, and said he also had a Stratosphere and was getting the same wifi problems after the update. He said all he could do was to send me out a replacement phone. I got the replacement phone, and it had the same problems.
-I read in multiple palces that Android 2.3.6 has a bug within wifi and DHCP. Apparently if you have a DHCP lease set to "forever", the phone will keep requesting a new address. Setting the DHCP server on the router to something like 2 weeks, or using a static IP is supposed to solve this. I have a NetGear N900 router, and I can not change teh DHCP lease time. It appears, however, that my router is not sending out "forever" leases. But just to make sure, I gave my phone a static IP. (None of these steps made any difference).
The only thing that temporarily fixes the problem is a reboot of the phone. This will again give you anywhere from 15min to 2 hours of good wifi use before problems start happening.
I have now had this update for over a week, and on 2 phones. I still can't maintain a wifi connection for much longer than 15 minutes without problems starting up.
I am asking Verizon or Samsung to at least confirm this issue if possible. Maybe there are newer revs of the Stratopshere hardware that don't have this problem. Or there is something unique about my (and apparently others) situation. But it seems like Verizon's current stance is to offer a repalcement phone (as currently all Stratospheres are within their 1 year manufacture warranty as the phone has not been ouy for quite 1 year yet).
I am asking for a workaround for this problem, or a true fix adressed by a new software update, or at least allow us to roll back to the original Andorid 2.3.5 software.
I have had my original Stratosphere for almost a year with no wifi problems - then get the FF1 update and have had nothing but problems on 2 different phones.
Thank you for your time.

Thanks for starting a comprehensive thread on problems with this update. I want to add one more.
I have Bluetooth in my car (a 2004 model), and previously the phone has connected to it practically instantly when I start the car. Since the update, I have never been able to connect the phone to the car by Bluetooth. Several times the phone has made a standard notification sound at the moment it should be connecting to Bluetooth, though no notification appears. I have no idea what that could mean.The car's Bluetooth shows up as paired in the list of devices in Settings > Wireless & networks > Bluetooth settings. I haven't seen this widely reported as an update issue, but perhaps some others have experienced it too.
UPDATE: I finally did some testing, and found that the notification was to signal the extremely brief appearance of a dialog indicating that the car's Bluetooth was requesting a connection. Accepting that request let the phone connect with the car, and calls went to the car's sound system as they should. When I turned the car off and back on (just the electrical system; not wasting any gas on this!), the connection was established immediately, so apparently the acceptance only had to be done once. Nevertheless, it did have to be done, and the dialog notification disappears within seconds. I believe it would have been possible to go into Bluetooth settings and accept the connection request there if I missed the notification; but not seeing the notification, I might not know to do this.
One further observation: When I turned the phone's Bluetooth off and back on after a connection had been established, leaving the car on the whole time, the two did not reconnect. I believe that may be different from before the update, but I'm not really sure.
Message was updated by David Rensberger

When reverting to purchased Adobe Acrobat XI Pro point product, after uninstalling Creative Cloud Desktop (and CC-based Acrobat XI Pro), how do I eliminate request to renew my subscription?

Creative Cloud just wasn't working for me, so after several years of frustration with being abroad and not online when the program decided to require online verification, I'm ditching Creative Cloud and reverting to the purchased Adobe Acrobat XI Pro point product. However, after uninstalling Creative Cloud Desktop (and CC-based Acrobat XI Pro), it still wants to go online and check my CC subscription, disallowing use of the newly installed point product version from a several year-old ESD file (and the more recent AcrobatUpd11010.dmg file).
Anyone have an idea of how to eliminate request to renew my subscription?
If, as a journalist, I've have these issues over the past two years, including this final insult when I'm trying to get away from CC, it can't be a one-off problem. So I'd like to hear details about others who've had a similar issue with reverting from CC back to a point product or to CS.
Thanks,
Tim

Hi Tim ,
Please refer to the following link to cancel your subscription of Creative Cloud .
https://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
You can get in touch with Adobe Chat Support if that does not help and to get your queries resolved.
https://helpx.adobe.com/adobe-connect/kb/connect-chat-support.html
Regards
Sukrit Dhingra

After uninstalling Google Chrome links in e-mail don't work any more

I have Firefox on my computer. I wanted to try out Chrome. After uninstalling Chrome and reinstating Firefox as my default browser, several things don't work properly, especially links in emails. I tried suggested solution of changing registry key for .html from ChromeHTML to htmlfile or FirefoxHTML but neither works. I just want to be able to click the link and open up the relevant web page.

As someone else has this problem I reply to my own question. Only uninstallling and reinstalling Firefox cures the problem.

WiFi problem after upgrading to Windows 8.1 Lenovo R400 ThinkPad

I have this problem after updating to 8 to 8.1
Right after updating to 8 to 8.1, all of a sudden my wifi stops working. I used my philips external wifi usb stick and now I'm able to get the internet going.
However if I disconnect my philips usb I no longer get the internet because the built in wifi that came with the R400 ThinkPad no longer works. I went through the device manager and under properties it tells me, 'Device not working properly' however it is up to date.
Im Running Windows 8.1 64bit Laptop Lenovo R400 ThinkPad

Hi Matti,
Thank you for replying back!
I suggest you to reinstall the Windows 8.1, as all the windows driver will not update, if you have upgraded the Windows 8 to Windows 8.1.
Please download Windows 8.1 separately and reinstall the OS, I hope this may resolve the issue.
Note: I am not suggesting for clean installation, only reinstalling the same OS.
Do not update the drivers from ThinkVantage system update utility. I suggest you to uninstall the current drivers and download the drivers manually for Windows 8.1 and install it.
Below is the link to enter the downloads page and download updates accordingly, please click on "Select Product" then in "QUICK PATH" enter the MTM no. select the exact model.
http://support.lenovo.com/en_US/downloads/default.page#
Hope this helps!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Computer problems after upgrading to Mavericks

SO many problems. I cleared out a ton of old stuff that I saw might be causing problems, and I've verified and repaired the disc, and uninstalled and reinstalled a couple of programs that I was seeing problems with in the console, but now I'm just flummoxed. It's behaving better than it was earlier, and isn't giving me the beach ball nearly so often, but it still seems like it's taking too long for a lot of things. I just reinstalled Avast and am currently letting a game update through Steam. I have the console and the activity monitor open to one side. Since I opened the console, it's been spitting out one or two messages every second, and all I can find through some internet searching is that it's something to do with the wireless connection. There's some other stuff periodically mixed in that doesn't sound good either, involving either sandboxd or mdworker. But for the most part it's along these lines:
Nov 5 00:59:52 kate-lenthalls-macbook-pro kernel[0]: 1516.810543: vap-0: connection_sm_roam_check_timer_handler: roam check cur rssi 22 rssi thresh 23 policy 3 last_scan_rssi 23 rssi_change_thresh 7 ignore_thresholds 0
Nov 5 00:59:53 kate-lenthalls-macbook-pro kernel[0]: 1517.811065: vap-0: connection_sm_roam_check_timer_handler: roam check cur rssi 22 rssi thresh 23 policy 3 last_scan_rssi 23 rssi_change_thresh 7 ignore_thresholds 0
Nov 5 00:59:54 kate-lenthalls-macbook-pro kernel[0]: 1518.811534: vap-0: connection_sm_roam_check_timer_handler: roam check cur rssi 22 rssi thresh 23 policy 3 last_scan_rssi 23 rssi_change_thresh 7 ignore_thresholds 0
Nov 5 00:59:55 kate-lenthalls-macbook-pro kernel[0]: 1519.811686: vap-0: connection_sm_roam_check_timer_handler: roam check cur rssi 22 rssi thresh 23 policy 3 last_scan_rssi 23 rssi_change_thresh 7 ignore_thresholds 0
Nov 5 00:59:56 kate-lenthalls-macbook-pro kernel[0]: 1520.812774: vap-0: connection_sm_roam_check_timer_handler: roam check cur rssi 23 rssi thresh 23 policy 3 last_scan_rssi 23 rssi_change_thresh 7 ignore_thresholds 0
Nov 5 00:59:58 kate-lenthalls-macbook-pro kernel[0]: com.avast.AvastFileShield Warning: Unable to retrieve file path. Skipping. [22]
Nov 5 01:00:27 --- last message repeated 208 times ---
Here's my report from EtreCheck:
Hardware Information:
          MacBook Pro (17-inch 2.4GHZ)
          MacBook Pro - model: MacBookPro3,1
          1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
          4 GB RAM
Video Information:
          GeForce 8600M GT     - VRAM: 256 MB
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0
          AirPlay: Version: 1.9
          AppleAVBAudio: Version: 2.0.0
          iSightAudio: Version: 7.7.3
System Software:
          OS X 10.9 (13A603) - Uptime: 0 days 0:30:19
Disk Information:
          ST9500420AS disk0 : (500.11 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 413.49 GB (122.62 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
                    BOOTCAMP (disk0s4) /Volumes/BOOTCAMP: 85.76 GB (28.21 GB free)
USB Information:
          Apple Inc. Bluetooth USB Host Controller
          Apple Inc. Built-in iSight
          Apple Computer Apple Internal Keyboard / Trackpad
          Apple Computer, Inc. IR Receiver
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
          com.eltima.ElmediaPlayer.kext          (1.58)
          com.bresink.driver.BRESINKx86Monitoring          (8.0)
          com.avast.PacketForwarder          (1.3)
          com.avast.AvastFileShield          (2.0.0)
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.eltima.ElmediaPlayer.daemon.plist
          [failed] com.google.GoogleML.plist
          [loaded] net.sourceforge.MonolingualHelper.plist
Launch Agents:
          [not loaded] com.adobe.AAM.Updater-1.0.plist
          [loaded] com.adobe.CS5ServiceManager.plist
          [loaded] com.wacom.pentablet.plist
User Launch Agents:
          [not loaded] com.avast.home.userinit.plist
          [loaded] com.google.keystone.agent.plist
          [loaded] com.markdouma.SourceFinaglerAgent.Portal.plist
          [loaded] com.valvesoftware.steamclean.plist
          [not loaded] org.virtualbox.vboxwebsrv.plist
User Login Items:
          Flux
          smcFanControl
          GrowlHelperApp
          Google Notifier
          FreeMemory
          TrashMeHelper
          Cloud
          sidenote
          Temperature Monitor
          avast!
          Dropbox
          Alfred 2
          Activity Monitor
3rd Party Preference Panes:
          avast! Preferences
          PenTablet
          Flash Player
          GeekTool
          Growl
          MultiBrowser
          Shades Preferences
Internet Plug-ins:
          Default Browser.plugin
          DirectorShockwave.plugin
          DivX Web Player.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          JavaAppletPlugin.plugin
          QuickTime Plugin.plugin
          Silverlight.plugin
          Unity Web Player.plugin
          WacomNetscape.plugin
          WacomTabletPlugin.plugin
User Internet Plug-ins:
          Picasa.plugin
Bad Fonts:
          None
Time Machine:
          Skip System Files: YES
          Auto backup: NO
          Time Machine not configured!
Top Processes by CPU:
              24%          Console
              10%          WindowServer
               9%          LotroLauncher
               2%          steam
               1%          EtreCheck
               1%          mds_stores
               1%          mds
               1%          com.avast.proxy
               1%          Activity Monitor
               0%          empdaemon
Top Processes by Memory:
          180 MB             steam
          156 MB             Safari
          152 MB             LotroLauncher
          150 MB             mdworker
          147 MB             mds_stores
          139 MB             com.apple.IconServicesAgent
          70 MB              Dropbox
          70 MB              Console
          66 MB              com.apple.WebKit.WebContent
          61 MB              Finder
Virtual Memory Statistics:
          207 MB             Free RAM
          1.81 GB            Active RAM
          1.46 GB            Inactive RAM
          513 MB             Wired RAM
          2.39 GB            Page-ins
          3 MB               Page-outs

I just reinstalled Avast
"Avast" is perhaps the worst of the whole wretched lot of commercial "security" products for the Mac. It's worse than the imaginary "viruses" you were worried about when you installed it. Not only does it fail to protect you, it throws false warnings, destabilizes and slows down your computer, and sometimes or always corrupts the network settings and the permissions of files in your home folder. Removing it may not repair all the damage, and neither will Disk Utility or even reinstalling OS X.
Back up all data, then remove "Avast" according to the developer's instructions. Reboot.
If you tried to remove Avast by dragging an application to the Trash, you'll have to reinstall it and follow the instructions linked above.
If you still have problems after following those instructions, post again.

After installing LV 7, MAX 3, NIDAQ 7, can not target to LV 6.1 RT even after uninstalling and loading older version.

We have started using LV 7 for all of our new projects but still have to support a number of older projects made in LV 6.1. After installing LV 7, MAX 3 and NIDAQ 7, we can not do remote DAQ configuration on the older version of RT and can not target to the RT system either. We used NIs uninstall for MAX and NIDAQ and then reinstalled the older versions, but we still can not remote DAQ configuration. Computers that have the older versions of MAX and NIDAQ and have never had the newer versions installed have no problem with remote DAQ configuration or targeting.
How can we go back to the previous version of MAX and NIDAQ and get it to work? What is left
after uninstalling the newer versions?

Rob,
I would recommend creating a Service Request on-line and contacting an Application Engineer. There are several possible reasons that software might not be completely removed, and we have some utilities that will make sure this does not happen. There also might be some issues with downloading the code to the "target". We could quickly reformat the controller and make sure to get the older software on the system.
Regards,
Robert Jackson
Application Engineer
National Instruments

Problem after uninstall

Similar Messages

Maybe you are looking for