Problem after update 10.5.5 and coolbook
Hi, i have a very big problem after update tp 10.5.5 in my macbook air.
i do the update with coolbook active.... and when restart... the system dont pass over 800mhz at 50ºC and all the system go very slow.
i tried to active again coolbook, restart, but coolbook dont work....
so now i have that problem.... my 1,8 macbook air dont pass over 800 mhz...
what can i do??
I'm not familiar with Coolbook, so can't really offer any help there but, have you tried disabling on removing Coolbook to see how your Air runs?
If the Air runs ok without Coolbook installed, there's your problem, if it still runs at a max of 800Mhz, contact Apple.
Similar Messages
-
My itunes opens 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
but my problem doesnot get solved even after trying all the methods in the above pages...
now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possibleMy itunes opens 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
but my problem doesnot get solved even after trying all the methods in the above pages...
now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible -
My iphone 4s wifi and bluetooth problem after updating ios 8? please help me...
my iphone 4s wifi and bluetooth problem after updating ios 8? please help me...
Hey there Abdulrahim0259,
I would recommend that you use the following 2 article to help troubleshoot the Wi-Fi and bluetooth issues you are seeing, respectively:
iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
And:
iOS: Troubleshooting Bluetooth connections - Apple Support
Thank you for using Apple Support Communities.
All the very best,
Sterling -
Personal hotspot missing and music volume not working and lots of other problem after updated 4s to ios8 ? Apple disappointed this time badly.
GO to Setting > Cellar Data > VPN Settings > Add any user and password under Personal Hotspot, then you will see it's activated again as usual
-
My ipod touch 4G got problem after update to iOS 6, it can not access the Apps store ,can not access safari,map, weather and so on, could someone help me to solve the problem, thanks in advance~~~
Force close the App Store app and reset the iPad. No data will be lost when you reset the device.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
Macbook 2.4 2008 after update 10.6.8 and firmware, won't fully boot
Weird problem after updating to 10.6.8 from 10.6.0 (fresh install).
I went thru Software Update, it downloaded 10.6.8 and the other updates. It also found that I needed a Firmware Update, which I also choose to install.
The updates went thru okay, including the Firmware. Everything went exactly as it should. The machine booted as per normal.
Afterwards, I checked that it had updated normally to 10.6.8 and everything checked out okay.
I left the Macbook plugged in and in Sleep. It was like this for probably 24 hours. NO BATTERY INSTALLED (don't know if this could be a problem, but I don't see how). I just came back now to find that I can't get back to the desktop from Sleep, nor can I boot to the desktop.
Specifically, here's what I see:
- first, on trying to Wake from Sleep, the screen remained black. The Superdrive spun up, the white light at the front of the Macbook was pulsing. But no desktop.
- I then held the Power button till it shut down. Then rebooted. And here's what I got:
a) no startup chime
b) I could Superdrive and fans and HD spin up
c) the display turned on, but didn't show the startup screen, no Apple logo, etc. It just went to the Desktop in about 10-15 seconds.
d) on the Desktop I can see:
- the Desktop background
- the Disk Utility window open to Repair Permissions, which was the last thing I'd done on the Macbook (permissions checked out okay)
- and THIS: I've never seen it before, but the Desktop is a bit "fuzzy", I can see the background and the Disk Utility window though, as well as a NUMBER OF SHORT BARS towards the bottom of the screen, and there's a BAR BY BAR PROGRESS from left to right (the first bar is filled in, then the second, etc.), BUT the progress DOESN'T make it to the last bar before the SCREEN GOES BLACK AGAIN (*sorry for the caps, but I'm trying to highlight the salient parts).
Any ideas?
Is this somehow related to the Firmware update? I remember that the Macbook booted fine after the Firmware update, the long horizontal progress bar was filled in as normal and got to the end; IIRC the Macbook then booted fine. I believe it was at this point that I repaired Permissions. Then left the Macbook, only to return to find it as it is now.
Any help much appreciated.Update:
Installed 10.6 and did all the updates, am now using it with an external monitor. Working fine as a Mini, but a real bummer re. the black or blue screen.
Without external monitor connected, I get this:
- I can boot, with startup chime, from DVD or external hard disk, after holding Option at startup and choosing bootable volume on screen; I can also boot from the DVD by holding down C key
- When I boot, the startup chime doesn't sound right away, as there's a short delay; in that time (a few seconds), the LED light at the front of the Macbook FLASHES 5 TIMES; there are NO error beep sounds
- The boot screen starts up, I get Apple logo and spinning wheel, and at about the usual point where the screen goes blue for a couple seconds, before the Macbook boots to the desktop, the screen goes black
- The Macbook seems to go to Sleep, with the screen black; the front light pulses
- I can wake the Macbook from Sleep by pressing a key
- Previously, after waking from Sleep, the Macbook went to the desktop -> in other words, the Macbook completed startup with the black screen;
- When the Macbook woke from Sleep, there was a slight delay of a few seconds before the Trackpad and Keyboard became active; I then had a few seconds to use the Trackpad before the screen went black again, and the Macbook went back to Sleep
- Now, though, when I wake it from Sleep, I get a Blue Screen, and the screen stays blue; i.e., doesn't turn black and the Macbook doesn't sleep
All of this refers to booting the Macbook without an external monitor connected.
When booting with an external monitor, everything works normally.
POINTS OF PARTICULAR INTEREST:
1) all of this happened from the time I updated the Firmware, as per Software Update
2) the screen works during the boot process, then goes black
3) boot completes even with black screen
4) the screen works for a 10 seconds when Macbook wakes from Sleep, then goes black again
5) now, the screen goes blue - and stays there - when the Macbook wakes from Sleep
6) Macbook works normally with external monitor; the Macbook's internal display is not recognized when an external monitor is connected; the iSight camera is not recognized
So, what the heck happened?
I can understand the internal display and/or onboard video getting broken, but then it should simply not work at all, right? How is it that it works "partially" or "temporarily", during boot and when waking from Sleep, before going black?
What is with the 5 flashing LEDs at boot or when waking from Sleep? (I can't find any info concerning the Macbook and 5 flashing LEDs, but only concerning the Macbook Air, and it refers to a battery problem). -
After updating my iphone 3G and my ipodtouch 3G ios5, universal dock and remote control doesn´t work
After updating my iphone 3G and my ipotouch 3G with ios5, the apple remote controls (the white and the aluminium one) doesn´t react when iphone or ipod are docked at the universal dock. The remote controls both still work with my Macbook, therefore it must be a problem with the dock. I have tried to connect both with the dock (Menu + left for 6 seconds) but it doesn´t help. Further the volume control doesn´t react on the iphone and the ipod when they are docked. Neither the one on the touchscreen nor the buttons. The day before the update everything was fine. Anyone any idea?
Thanks!Look at the previous posts on the right under the heading: "More Like This". I appears that others are having the same problem.
-
White screen problem after updating to 1.1 firmware
My 2G iPod Nano worked fine with 1.0.1 and 1.0.2 firmware but after updating to 1.1 I get white screen everytime I turn it on after longer period of time. Turning the iPod off and then right back on makes it work again. I have done restore 3 times without effect. I even removed the firmware files so that iTunes downloads them again when doing the restore but that didn't work either.
Should I return it or wait for new firmware? Has anyone else had this problem after updating to 1.1?Disconnect iPod and close iTunes.
Firmware files are in "Documents and Settings\username\Application Data\Apple Computer\iTunes\iPod Software Updates" folder.
You should still have the 1.0.2 files named "iPod_19.1.0.2.ipsw" and "iPod_19.1.0.2.ipsw.signature" in there if have you upgraded from 1.0.1 version.
Remove 1.1 files from the folder so that only those to files are in there.
Disconnect from network (I switched off my wlan) so that iTunes can't download the new version. Connect your iPod and do Restore, iTunes will now use the old firmware files because it can't connect to the internet.
Fujitsu Siemens Amilo M3438G Windows XP -
Photoshop CS2 problems after updating to 10.4.5.?
Anybody notice Photoshop CS problems after updating to 10.4.5.?
Hello I had the same problem
I found the following information that helped me.....
Program errors occur when software conflicts arise due to an updated operating system. You can resolve these errors when you also update the driver software that causes the conflict or when you update the operating system. Program errors can also occur because of a damaged Photoshop preference file, or if there is a problem with a phone or internet connection. The Apple Disk Utility fixes file system errors that can also cause program errors.
Error "Could not complete your request..." or "Could not create a new document..." (Photoshop CS2 on Mac OS X v10.4)
Issue
Adobe Photoshop CS2 returns one of the following error messages:
"Could not complete your request because of a program error" when you try to open a file.
"Could not create a new document because of a program error" when you try to create a new file.
Solution 1:
Install the most recent update to Mac OS.
Solution 2:
Re-create your preferences files.
1. Hold CommandOptionShift when you start Photoshop.
2. Click Yes to the message, "Delete the Adobe Photoshop Settings file?"
Solution 3:
Disconnect your Internet connection.
To disconnect your Internet connection, do one of the following:
If you are connected to the Internet via a telephone modem, then disconnect from the modem.
If you are connected to the Internet via cable modem or DSL, then disconnect the ethernet cable from your computer.
Solution 4:
Use a disk repair utility.
Restart your Mac in Single User mode and run fsck -fy . For more information about the fsck command, please visit the Apple website at http:/docs.info.apple.comarticle.html?artnum=106214 .
Solution 5:
Ensure that all your drivers are compatible with Mac OS X v10.4.
Determine if your printer and video card (and any other peripherals you might have) are compatible with Mac OS X v10.4, and visit the manufacturers' websites to update the drivers.
Solution 6:
Re-create your printers in Mac OS X.
To re-create your printers, first delete them and then add them again.
To delete your printers:
1. Open System Preferences from the Apple menu.
2. Select Print & Fax, and click Printing.
3. Select each printer in the list and click the delete key (the minus key).
For instructions on how to add your printers again, see "Setting up to print to a printer" in Mac Help or search Help using the phrase "add a printer."
The one that fixed it for me was solution 6 -- re-creating my printers
I don't know why but it could be worth a try
Good luck
ADAM
17" Powerbook G3 iMac Mac OS X (10.4.3)
17" Powerbook G3 iMac Mac OS X (10.4.3)
17" Powerbook + G3 iMac Mac OS X (10.4.5) -
Iphone 5 back camera problem after update to IOS 8. Focus doesn't work on back camera!
My device is Iphone 5 64gb IOS 8.
I have problem after update to IOS 8. When i run camera.. I hear some scratch inside my phone. And focus of back camera doesn't work.
1. How can i fix it?
2. Or how to rollback to IOS 7+ ?
3. Should i come to app store with this problem?I'm having this same problem too. Worked fine prior to iOS update. I contacted Verizon this morning who advised that this is a known issue. They suggested I backup my device, and perform a factory data reset. When prompted to update to iOS 8 again, re-installation has been known to resolve the issue. With all the problems with iOS 8, camera, and overall device slowing, I might just wait for a follow on SW turn.
-
What cause searching network problem after updating iphone 6 from iOS 8.1.2 TO iOS 8.1.3?
what cause searching network problem after updating iphone 6 from iOS 8.1.2 TO iOS 8.1.3?
SSince Apple does not support downgrading the iOS I suggest you start a new question that gives a good title to a specific problem. Then in the body of the thread describe the problem in detail, tell us what steps you have tried so far to correct the problem, what happened, and what error messages you received.
-
I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP
I am facing the same issue! I bought 5c few days back
and everything was fine till I updated the software 7.0.4!
Whenever am connected to wifi am unable to make a call and if someone tries
Calling me they get the message that my number is not
Reachable! When I go back to 3G the calls work perfectly!!
Please help me out since I use wifi more than my network.
Appreciate any advise on this -
Anyone has any problem after updating to iSO 4.3.1 ?
anyone has any problem after updating to iSO 4.3.1 ?
I would like to know before updating mine.My 3G kept freezing after iSO 4.2.. and after reading the forums I updated both my Itunes and software to iOS 4.3.1, now I've lost my notes, contacts, calender entries and so far in the last ten minutes it's turned off and restarted itself and sync'd continually about 5 times.
So basically I'm still where I was before only more cranky. In addition, I live in Australia and there are no Genius places here, there is no support from Apple unless you pay for it even by an email, you basically end up fending for yourself under a supposed warranty that isn't worth the paper its printed on.
It you haven't already guessed, I'm more than a little ****** off.
If I'd known how much trouble this was going to be, I don't think I would have spent the $400 odd dollars to buy it.
If its not right by the weekend I'm taking it back to the shop I bought it. -
Cpufrequtils problem after update
Hello!
I've a problem after update my system with pacman -Syu.
When system loads cpufreq i've this problem:
cpufreq-set: error while loading shared libraries: libsysfs.so.1: cannot open shared object file: No such file or directory
I try uninstall the cpufrequtils package and reinstall it but doesn't works
How can i fix it?
thanks.raskolnikov wrote:
No need of cpufrequtils :
$ cat /etc/rc.local
#!/bin/sh
echo conservative > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
That's ok. And of course powernow-k7 in MODULES array of rc.conf
Sure, that's pretty much what cpufrequtils do, however, they a) don't spawn a shell process and b) allow you to configure sudo to handle user-based changes. It's just a nice wrapper for that.
raskolnikov wrote:BTW the last update of this (cpufrequtils) package has overwriten my /etc/conf.d/cpufreq file, is this a normal comportement ? This file was not in NoUpgrade as if I remeber correctly, NoUpgrade was deprecated with last pacman package...
Errm, blame me - that file should be backed up. Thankfully, it's not a giant config file. -
HT6147 Problems after updating iPad2 with iOS7.0.6. Has anyone had this problem?
Problems after updating iPad2 with iOS7.0.6. Has anyone had this problem? I lost my notes, calendar, songs, games+ more. I've tried everything to restore these, but it won't let me. HELP!!!!'
Restore from iCloud Backup
1. Settings>General>Reset>Erase all content and settings
2. Tap Erase
3. You'll see Apple logo and progress bar
4. Hello
5. Slide to set up
6. Set language
7. Set country
8. Choose Wi-Fi network; enter Wi-Fi password
9. (a) Use Location Service (b) Don't Use Location Service
10. Select option
11. (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
12. Selected Restore from iCloud Backup
13. Enter password for iCloud
14. Agree to Terms and Conditions
15. Setup Apple ID
16. Select backup
17. Restoring from iCloud
18. Hello
19. Restore Completed. Your iPad was restored successfully. There are just a few more steps to follow and then you're done!
20. Continue
21. Finish setting iCloud enter Password
22. Updating iCloud settings
23. Create a Passcode
24. Welcome to iPad
25. Get Started
26. Restoring Apps and Media
27. Enter Apple ID and Password
28. Notice: Restore Incomplete, some items could not be downloaded from the Store. If they are on your computer, you can restore them by syncing with iTune
29. Connect iPad to iTune to sync with computer
30. Sync Music, Videos and Album Artwork
Maybe you are looking for
-
IMac - Slow load and wifi problems
I have lion installed on my macbook pro and on my iMac. My macbook pro works GREAT...no problems. My iMac - I am ready to toss out a window. Here are the problems: INCREDIBLY slow boot up time - 5-10 minutes from off - 5-8 minutes from sleep The hard
-
HP Photosmart C7200 series will not install on HP TouchSmart PC windows 7
I just bought a HP Touchsmart computer. I have a HP Photosmart C7200 series printer. The cd for this printer will not install because it does not support windows 7. Is there a fix for this.
-
HEY, i made a huge imovie project.. and the sound and video is out of sync, the sound comes seconds before the video... HELPP!
-
Is there a way to check the date of birth
of an iBook? Thanks, SP
-
The 'Library' folder that supposed to show up in my "home" folder is not showing up.
If you click on your mac HD icon and go into the 'users' folder. Ther eis an icon with a house. This is what I think is called the 'home' folder. Usually, there is a folder in the 'Home' folder called 'Library' and I cant seem to locate it. Where did