Problem after update firmware 1.2.1

After updated the firmware to 1.2.1, when playing MP3 format songs, the music goes strange and quality turn out very bad. However, when it playing M4A format songs, it runs perfect. Any idea or suggest? Please do not tell me to convert the MP3 file format to M4A.
Thank you very much.

Thanks for clarifying, hopefully someone from BlackBerry will pick this up and it will be fixed in a future release.
If you've been helped click on , if you've been saved buy the app.
Developer of stokLocker, Sympatico and Super Sentences.

Similar Messages

E71 energy problem after updating firmware

Last Sunday I updated my e71.Since then my battery dies for a day I've tried with other battery and I think the problem isn't in the battery. Please help

Reset the E71. Dial *#7370# 12345 reformat, you'll lose all data. Make a backup first and restore without the settings.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

White screen problem after updating to 1.1 firmware

My 2G iPod Nano worked fine with 1.0.1 and 1.0.2 firmware but after updating to 1.1 I get white screen everytime I turn it on after longer period of time. Turning the iPod off and then right back on makes it work again. I have done restore 3 times without effect. I even removed the firmware files so that iTunes downloads them again when doing the restore but that didn't work either.
Should I return it or wait for new firmware? Has anyone else had this problem after updating to 1.1?

Disconnect iPod and close iTunes.
Firmware files are in "Documents and Settings\username\Application Data\Apple Computer\iTunes\iPod Software Updates" folder.
You should still have the 1.0.2 files named "iPod_19.1.0.2.ipsw" and "iPod_19.1.0.2.ipsw.signature" in there if have you upgraded from 1.0.1 version.
Remove 1.1 files from the folder so that only those to files are in there.
Disconnect from network (I switched off my wlan) so that iTunes can't download the new version. Connect your iPod and do Restore, iTunes will now use the old firmware files because it can't connect to the internet.
Fujitsu Siemens Amilo M3438G Windows XP

Kernel panics after updating firmware

Kernel panics began at startup after updating firmware about 2 weeks ago. Went through the KP repair routines prescribed by thexlab.com. Found no problems with the hard drive, permissions, etc. Did erase and install (with Leopard OS dvd bought from best buy) after archiving files to external HD and was able to startup normally. Updated OS to 10.5.7, along with several other items (iTunes was one of them). Put previously copied files (mostly iTunes). The computer ran successfully for a few days and then started getting KP's at startup again. Did another erase and install. Had success. Loaded iLife and Office 08 to have something to try to test the machine with. Shut down the computer and restarted successfully. I had forgotten I had not tested the RAM so downloaded Memtest. Tried to run it but the computer froze half way through the test. Did a hard shutdown, then tried to restart normally and got the KP again at startup. Here is the panic log:
Sun Jul 5 18:24:05 2009
panic(cpu 1 caller 0x001A7BED): Kernel trap at 0x00b10612, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x000000b8, CR3: 0x0134c000, CR4: 0x00000660
EAX: 0x43ec9630, EBX: 0x049cf804, ECX: 0x04e15800, EDX: 0x00000000
CR2: 0x000000b8, EBP: 0x43ec9668, ESI: 0x00000000, EDI: 0xffffffff
EFL: 0x00010246, EIP: 0x00b10612, CS: 0x00000008, DS: 0x04e10010
Error code: 0x00000000
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x43ec9408 : 0x12b0e1 (0x4555b4 0x43ec943c 0x133238 0x0)
0x43ec9458 : 0x1a7bed (0x45e568 0xb10612 0xe 0x45dd24)
0x43ec9538 : 0x19e517 (0x43ec9550 0x1 0x43ec9668 0xb10612)
0x43ec9548 : 0xb10612 (0xe 0x48 0x10 0xb40010)
0x43ec9668 : 0xb1753d (0xc1d00005 0x1000000 0x1000003 0x40)
0x43ec96c8 : 0xb0bfc0 (0x43ec9858 0x43ec9808 0x0 0xafe41c)
0x43ec9828 : 0xb00132 (0x0 0x600d600d 0x7027 0x43ec9858)
0x43ec98e8 : 0xca58de (0xc1d00005 0x1000000 0x1000003 0x40)
0x43ec9918 : 0xcae273 (0x2436f000 0x1000000 0x88100090 0x3e)
0x43ecb8a8 : 0xc92d8a (0x2436f000 0x1000000 0x15 0x2436f01c)
0x43ecb9a8 : 0xafa472 (0x2436f000 0x0 0x43ecbab2 0x80)
0x43ecba08 : 0xaf15a5 (0x48af000 0x0 0x43ecbab2 0x80)
0x43ecbb38 : 0xaf2d74 (0x48af000 0xaf6358 0x43ecbbec 0x4)
0x43ecbc08 : 0xade139 (0x48af000 0x1 0x0 0x13)
0x43ecbc68 : 0xad7940 (0x48af000 0x2407 0x43ecbd2c 0x48af000)
0x43ecbc98 : 0x40c515 (0x48af000 0x4a40130 0x4a40130 0x0)
Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.NVDAResman(5.1.6)@0xaf9000->0xd25fff
dependency: com.apple.iokit.IONDRVSupport(1.5)@0xaeb000
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000
com.apple.iokit.IONDRVSupport(1.5)@0xaeb000->0xaf8fff
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000
com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000->0xaeafff
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:35:55 PDT 2007; root:xnu-1228~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F42388C8)
Was able to start up in safe mode and ran memtest again, this time having success and finding no RAM problems from the single run of Memtest. Shut down and restarted successfully.
Turned the computer off for the night and just restarted it successfully about 24 hours later, and it is still running.
I presently have about 130GB of free space on my HD. I don't have any peripherals attached. The computer gets fairly warm at times but certainly not excessively.
Can anyone decipher my KP log and see if there is a fixable problem?
thanks in advance,
Pat Leopard

Had another kernel panic at startup this morning. I had the Leopard DVD in and was contemplating another erase and install, but tried to back out of it. On restart the KP happened. Here is the log:
Wed Jul 8 10:44:41 2009
panic(cpu 0 caller 0x001A7BED): Kernel trap at 0x00b10612, type 14=page fault, registers:
CR0: 0x8001003b, CR2: 0x000000b8, CR3: 0x0134c000, CR4: 0x00000660
EAX: 0x2ebb1630, EBX: 0x04e20404, ECX: 0x04de7000, EDX: 0x00000000
CR2: 0x000000b8, EBP: 0x2ebb1668, ESI: 0x00000000, EDI: 0xffffffff
EFL: 0x00010246, EIP: 0x00b10612, CS: 0x00000008, DS: 0x04de0010
Error code: 0x00000000
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x2ebb1408 : 0x12b0e1 (0x4555b4 0x2ebb143c 0x133238 0x0)
0x2ebb1458 : 0x1a7bed (0x45e568 0xb10612 0xe 0x45dd24)
0x2ebb1538 : 0x19e517 (0x2ebb1550 0x1 0x2ebb1668 0xb10612)
0x2ebb1548 : 0xb10612 (0xe 0x48 0x10 0xb40010)
0x2ebb1668 : 0xb1753d (0xc1d00001 0x1000000 0x1000003 0x40)
0x2ebb16c8 : 0xb0bfc0 (0x2ebb1858 0x2ebb1808 0x0 0xafe41c)
0x2ebb1828 : 0xb00132 (0x0 0x600d600d 0x7027 0x2ebb1858)
0x2ebb18e8 : 0xca58de (0xc1d00001 0x1000000 0x1000003 0x40)
0x2ebb1918 : 0xcae273 (0x2435f000 0x1000000 0x88100090 0x3e)
0x2ebb38a8 : 0xc92d8a (0x2435f000 0x1000000 0x15 0x2435f01c)
0x2ebb39a8 : 0xafa472 (0x2435f000 0x0 0x2ebb3ab2 0x80)
0x2ebb3a08 : 0xaf15a5 (0x4837800 0x0 0x2ebb3ab2 0x80)
0x2ebb3b38 : 0xaf2d74 (0x4837800 0xaf6358 0x2ebb3bec 0x4)
0x2ebb3c08 : 0xade139 (0x4837800 0x1 0x0 0x13)
0x2ebb3c68 : 0xad7940 (0x4837800 0x2407 0x2ebb3d2c 0x4837800)
0x2ebb3c98 : 0x40c515 (0x4837800 0x4a0bc40 0x4a0bc40 0x0)
Backtrace continues...
Kernel loadable modules in backtrace (with dependencies):
com.apple.NVDAResman(5.1.6)@0xaf9000->0xd25fff
dependency: com.apple.iokit.IONDRVSupport(1.5)@0xaeb000
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000
com.apple.iokit.IONDRVSupport(1.5)@0xaeb000->0xaf8fff
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
dependency: com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000
com.apple.iokit.IOGraphicsFamily(1.5)@0xacf000->0xaeafff
dependency: com.apple.iokit.IOPCIFamily(2.4)@0x63b000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
9A581
Kernel version:
Darwin Kernel Version 9.0.0: Tue Oct 9 21:35:55 PDT 2007; root:xnu-1228~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F42388C8)
I left the computer alone for a while and when I hit the power button it came right up.
I'm going to pull RAM modules per your suggestion.
thanks,
Pat Leopard

Sony A7 failed to turn on after updating firmware 2.00

As i mentioned, my Sony A7 failed to turn on after updating firmware 2.00. It just appear a blank screen after click the finished button on the updating app on Mac. I waited for more than an hour and there is still no thing happened.

I bought the Sony A7II a few days ago. It initially charged just fine, but today I tried to charge it using the cable with an electrical outlet as well as the USB to computer. Neither one would get the charge light to illuminate. Not feeling the love Sony. I just purchased a Flash, wrist belt, filters, etc... I'm definitely not happy. It seems this is a problem!

Some buttons without tones after updating firmware...

Hi.
After updated firmware to version 20.0.080 (5530 Xpress Music), some tones and vibrates at dialing pad (just numbers) and at Contacts (main screen) don't work any more.
All other functions work normaly just as described, but some tones and vibrating functions doest'n seem to react. I have set touch screen tones on level 2, also the vibrate on level 2. Tryed to reinstal the latest firmware again, done succesfuly, but no changes.
Should I try to restore the phone by *#7370# ???
Is anybody facing the same issue ???
br,

Hey,
I have the same problem with my phone. After the update, installing v.20.0.080 the dial tone from the keypad just dissapeared. These morons at Nokia instead of adding letters to the keypad dialer with the new firmware, they went further and removed the dial tone. Such a progressive step..

Photoshop CS2 problems after updating to 10.4.5.?

Anybody notice Photoshop CS problems after updating to 10.4.5.?

Hello I had the same problem
I found the following information that helped me.....
Program errors occur when software conflicts arise due to an updated operating system. You can resolve these errors when you also update the driver software that causes the conflict or when you update the operating system. Program errors can also occur because of a damaged Photoshop preference file, or if there is a problem with a phone or internet connection. The Apple Disk Utility fixes file system errors that can also cause program errors.
Error "Could not complete your request..." or "Could not create a new document..." (Photoshop CS2 on Mac OS X v10.4)
Issue
Adobe Photoshop CS2 returns one of the following error messages:
"Could not complete your request because of a program error" when you try to open a file.
"Could not create a new document because of a program error" when you try to create a new file.
Solution 1:
Install the most recent update to Mac OS.
Solution 2:
Re-create your preferences files.
1. Hold CommandOptionShift when you start Photoshop.
2. Click Yes to the message, "Delete the Adobe Photoshop Settings file?"
Solution 3:
Disconnect your Internet connection.
To disconnect your Internet connection, do one of the following:
If you are connected to the Internet via a telephone modem, then disconnect from the modem.
If you are connected to the Internet via cable modem or DSL, then disconnect the ethernet cable from your computer.
Solution 4:
Use a disk repair utility.
Restart your Mac in Single User mode and run fsck -fy . For more information about the fsck command, please visit the Apple website at http:/docs.info.apple.comarticle.html?artnum=106214 .
Solution 5:
Ensure that all your drivers are compatible with Mac OS X v10.4.
Determine if your printer and video card (and any other peripherals you might have) are compatible with Mac OS X v10.4, and visit the manufacturers' websites to update the drivers.
Solution 6:
Re-create your printers in Mac OS X.
To re-create your printers, first delete them and then add them again.
To delete your printers:
1. Open System Preferences from the Apple menu.
2. Select Print & Fax, and click Printing.
3. Select each printer in the list and click the delete key (the minus key).
For instructions on how to add your printers again, see "Setting up to print to a printer" in Mac Help or search Help using the phrase "add a printer."
The one that fixed it for me was solution 6 -- re-creating my printers
I don't know why but it could be worth a try
Good luck
ADAM
17" Powerbook G3 iMac Mac OS X (10.4.3)
17" Powerbook G3 iMac Mac OS X (10.4.3)
17" Powerbook + G3 iMac Mac OS X (10.4.5)

My itunes opens after 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to 12.x ....my operating system win7;processor i5 intel haswell and 4gb ram...i hav no issue

My itunes opens 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
but my problem doesnot get solved even after trying all the methods in the above pages...
now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible

My itunes opens 2-3 hrs after doubleclicking it to open;it happened once or twice with itunes 11.x , but its a constant problem after updating itunes to the latest 12.0.1....my operating system windows7;processor i5 intel haswell and 4gb ram...i have no issue with opening other big programs....i tried uninstalling completely the itunes and reinstalling it as i thought at first it is not opening (because it takes really long time) and i followed the following support pages
1)iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
2)iTunes for Windows doesn't open after upgrading in Windows Vista, Windows 7, or Windows 8
but my problem doesnot get solved even after trying all the methods in the above pages...
now i realized,it opens after 2-3 hrs and at will...after opening it keeps hanging.finally it doesnot again open immediately after closing...kindly help me out as soon as possible

Iphone 5 back camera problem after update to IOS 8. Focus doesn't work on back camera!

My device is Iphone 5 64gb IOS 8.
I have problem after update to IOS 8. When i run camera.. I hear some scratch inside my phone. And focus of back camera doesn't work.
1. How can i fix it?
2. Or how to rollback to IOS 7+ ?
3. Should i come to app store with this problem?

I'm having this same problem too. Worked fine prior to iOS update. I contacted Verizon this morning who advised that this is a known issue. They suggested I backup my device, and perform a factory data reset. When prompted to update to iOS 8 again, re-installation has been known to resolve the issue. With all the problems with iOS 8, camera, and overall device slowing, I might just wait for a follow on SW turn.

What cause searching network problem after updating iphone 6 from iOS 8.1.2 TO iOS 8.1.3?

what cause searching network problem after updating iphone 6 from iOS 8.1.2 TO iOS 8.1.3?

SSince Apple does not support downgrading the iOS I suggest you start a new question that gives a good title to a specific problem. Then in the body of the thread describe the problem in detail, tell us what steps you have tried so far to correct the problem, what happened, and what error messages you received.

HT4623 I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP

I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP

I am facing the same issue! I bought 5c few days back
and everything was fine till I updated the software 7.0.4!
Whenever am connected to wifi am unable to make a call and if someone tries
Calling me they get the message that my number is not
Reachable! When I go back to 3G the calls work perfectly!!
Please help me out since I use wifi more than my network.
Appreciate any advise on this

Flash player problem after updating to belle on my...

flash player problem after updating to belle on my nokia c7.when I try to play .flv videos screen goes blank as show in image,previously these videos runs fine on symbian anna plz help plz help or tell me the way to downgrade to anna
Attachments:
scr000002.jpg ‏10 KB

1) product code 059B7W0
2) software version 111.030.0609
3) it is actually stored .flv files on my phone workes fine on symbian anna
Attachments:
Scr000003.jpg ‏17 KB
Scr000004.jpg ‏15 KB

Anyone has any problem after updating to iSO 4.3.1 ?

anyone has any problem after updating to iSO 4.3.1 ?
I would like to know before updating mine.

My 3G kept freezing after iSO 4.2.. and after reading the forums I updated both my Itunes and software to iOS 4.3.1, now I've lost my notes, contacts, calender entries and so far in the last ten minutes it's turned off and restarted itself and sync'd continually about 5 times.
So basically I'm still where I was before only more cranky. In addition, I live in Australia and there are no Genius places here, there is no support from Apple unless you pay for it even by an email, you basically end up fending for yourself under a supposed warranty that isn't worth the paper its printed on.
It you haven't already guessed, I'm more than a little ****** off.
If I'd known how much trouble this was going to be, I don't think I would have spent the $400 odd dollars to buy it.
If its not right by the weekend I'm taking it back to the shop I bought it.

Microsoft Office 2011 no longer opens because "there is a problem" after updating mountain lion when the app store said there was an update available this morning. Reinstalling did not work. What's the problem?

Microsoft Office 2011 no longer opens because "there is a problem" after updating mountain lion when the app store said there was an update available this morning. Reinstalling did not work. What's the problem?

Has your problem been solved by the updates??
Have a similar problem. This MacBook opened all MS Office programs in Dec2012 but no longer does in Feb2013. Went to Microsoft/mac/downloads but none of the three updates would run citing a problem "version of software needed to run this update was not found on this volume".
MacBook: 7.1, Intel Core 2 Duo, 2.4 GHz
Microsoft Office 2011: version 14.2.3
Mountain Lion: 10.8.2 (12C60)

Cpufrequtils problem after update

Hello!
I've a problem after update my system with pacman -Syu.
When system loads cpufreq i've this problem:
cpufreq-set: error while loading shared libraries: libsysfs.so.1: cannot open shared object file: No such file or directory
I try uninstall the cpufrequtils package and reinstall it but doesn't works
How can i fix it?
thanks.

raskolnikov wrote:
No need of cpufrequtils :
$ cat /etc/rc.local
#!/bin/sh
echo conservative > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
That's ok. And of course powernow-k7 in MODULES array of rc.conf
Sure, that's pretty much what cpufrequtils do, however, they a) don't spawn a shell process and b) allow you to configure sudo to handle user-based changes. It's just a nice wrapper for that.
raskolnikov wrote:BTW the last update of this (cpufrequtils) package has overwriten my /etc/conf.d/cpufreq file, is this a normal comportement ? This file was not in NoUpgrade as if I remeber correctly, NoUpgrade was deprecated with last pacman package...
Errm, blame me - that file should be backed up. Thankfully, it's not a giant config file.

Problem after update firmware 1.2.1

Similar Messages

Maybe you are looking for