Problem after update software
Hi, I have a problem with my Nokia 2700c after software update(v.7.80) The problem is that after update my music player blink in white screen and I can't see any data when I play music. I didn't have this problem before update. I've reinstalled the update but it's not success. Please help me, what must I do?
Hello EveryBody
To update your Nokia 2700, DON'T USE "nokia software update" directly.
You'll have to install NOKIA OVI SUITE, then sign in with your account ou register.
Afterwards update your 2700 via the update option of OVI SUITE.
I just tested it and it works
Similar Messages
-
Problem after update software 5700xm
I'm facing some problem after updating my 5700xm from v3.27 to v 03.83.1 22-06-07.
1. when opening the music player when the open progress is appear it came out so long untill i have to switch it off and on it again then when i open the music player it goes OK.
2. Refreshing music library, when i try to update/refresh to find new music after recived bluetooth it takes to long to find like 1hr and at the end i have to stop it. Also no new music found i'v done it many times.
3. After all the problem came out, i thought that maybe it will solve if i just try restore the phone to default factory setting, so i back up phone memory to mmc and then press *£7370£, so it restart and appear installing it took long time to install and at the end came out masage "some application are unable to install....." then i try to restore the phone memory, but it like the restore can't function well or maybe don't restore at all b'cos all my application that I install erlyer not fuction, all my contac are lost so do massege....
So do any body got the same prob as i am...????
Can I down grade to the erlyer version????
Any body please help give some oppinion to solve this prob so that i can sleep well....Hello EveryBody
To update your Nokia 2700, DON'T USE "nokia software update" directly.
You'll have to install NOKIA OVI SUITE, then sign in with your account ou register.
Afterwards update your 2700 via the update option of OVI SUITE.
I just tested it and it works -
Nokia 6125: Problems after updating software
friends,
i recently updated my nokia 6125 software from 3.50 to 3.72.
but after updation i am facing following problems:
- i lost the calculator as that being an application, could not be stored in back up. & now my phone is with a calculator. & all the J2ME calculator i could find on internet were below expectations. so would anyone please tell me the solution that i may get the original nokia calculator as download or link to some other user friendly calculator (J2ME).
- the customised wallpaper & tone settings are lost after every switch-off.
anyone please help me out.Well i am afraid now only way to get back calculator application is to go to the Nokia authorized service center.
-
Syncing problem after updating software
every time this thing (iPod Touch V3)updates software it loose the calendar (Outlook) and the Outlook mail account (although I still get e-mail on the iPod (?)
Have had to restore the last 3 times I updated to get the Outlook calendar and mail recognized again.It is the zoom feature and can be found in the manual:
http://support.apple.com/manuals/#ipodtouch -
Problem after updating software
I updated my ipod touch with the new software download and now the screen is HUGE and I can't seem to make the icons smaller. I tried various things and finally tried RESTORE. Same problem.
It is the zoom feature and can be found in the manual:
http://support.apple.com/manuals/#ipodtouch -
TS1368 problem after updating software
I updated my iOS software and can not find my purchased ringtones on my iPhone. They appear both in my iTunes library and device, but not on my phone,
If you have the purchased items in iTunes, just sync your iTunes library with your iPhone to bring back the ringtones.
-
White screen problem after updating to 1.1 firmware
My 2G iPod Nano worked fine with 1.0.1 and 1.0.2 firmware but after updating to 1.1 I get white screen everytime I turn it on after longer period of time. Turning the iPod off and then right back on makes it work again. I have done restore 3 times without effect. I even removed the firmware files so that iTunes downloads them again when doing the restore but that didn't work either.
Should I return it or wait for new firmware? Has anyone else had this problem after updating to 1.1?Disconnect iPod and close iTunes.
Firmware files are in "Documents and Settings\username\Application Data\Apple Computer\iTunes\iPod Software Updates" folder.
You should still have the 1.0.2 files named "iPod_19.1.0.2.ipsw" and "iPod_19.1.0.2.ipsw.signature" in there if have you upgraded from 1.0.1 version.
Remove 1.1 files from the folder so that only those to files are in there.
Disconnect from network (I switched off my wlan) so that iTunes can't download the new version. Connect your iPod and do Restore, iTunes will now use the old firmware files because it can't connect to the internet.
Fujitsu Siemens Amilo M3438G Windows XP -
Photoshop CS2 problems after updating to 10.4.5.?
Anybody notice Photoshop CS problems after updating to 10.4.5.?
Hello I had the same problem
I found the following information that helped me.....
Program errors occur when software conflicts arise due to an updated operating system. You can resolve these errors when you also update the driver software that causes the conflict or when you update the operating system. Program errors can also occur because of a damaged Photoshop preference file, or if there is a problem with a phone or internet connection. The Apple Disk Utility fixes file system errors that can also cause program errors.
Error "Could not complete your request..." or "Could not create a new document..." (Photoshop CS2 on Mac OS X v10.4)
Issue
Adobe Photoshop CS2 returns one of the following error messages:
"Could not complete your request because of a program error" when you try to open a file.
"Could not create a new document because of a program error" when you try to create a new file.
Solution 1:
Install the most recent update to Mac OS.
Solution 2:
Re-create your preferences files.
1. Hold CommandOptionShift when you start Photoshop.
2. Click Yes to the message, "Delete the Adobe Photoshop Settings file?"
Solution 3:
Disconnect your Internet connection.
To disconnect your Internet connection, do one of the following:
If you are connected to the Internet via a telephone modem, then disconnect from the modem.
If you are connected to the Internet via cable modem or DSL, then disconnect the ethernet cable from your computer.
Solution 4:
Use a disk repair utility.
Restart your Mac in Single User mode and run fsck -fy . For more information about the fsck command, please visit the Apple website at http:/docs.info.apple.comarticle.html?artnum=106214 .
Solution 5:
Ensure that all your drivers are compatible with Mac OS X v10.4.
Determine if your printer and video card (and any other peripherals you might have) are compatible with Mac OS X v10.4, and visit the manufacturers' websites to update the drivers.
Solution 6:
Re-create your printers in Mac OS X.
To re-create your printers, first delete them and then add them again.
To delete your printers:
1. Open System Preferences from the Apple menu.
2. Select Print & Fax, and click Printing.
3. Select each printer in the list and click the delete key (the minus key).
For instructions on how to add your printers again, see "Setting up to print to a printer" in Mac Help or search Help using the phrase "add a printer."
The one that fixed it for me was solution 6 -- re-creating my printers
I don't know why but it could be worth a try
Good luck
ADAM
17" Powerbook G3 iMac Mac OS X (10.4.3)
17" Powerbook G3 iMac Mac OS X (10.4.3)
17" Powerbook + G3 iMac Mac OS X (10.4.5) -
I AM FACING PROBLEM AFTER UPDATING (7.0.4) MY PHONE MODEL 5C,AFTER THIS UPDATE SOME TIMES I CANT MAKE CALLS & SOME TIMES WHEN ANY BODY ELSE WANTS TO CALL ME BACK THE MESSAGE COME THAT THE USER IS NOT REACHABLE.PLS HELP
I am facing the same issue! I bought 5c few days back
and everything was fine till I updated the software 7.0.4!
Whenever am connected to wifi am unable to make a call and if someone tries
Calling me they get the message that my number is not
Reachable! When I go back to 3G the calls work perfectly!!
Please help me out since I use wifi more than my network.
Appreciate any advise on this -
Flash player problem after updating to belle on my...
flash player problem after updating to belle on my nokia c7.when I try to play .flv videos screen goes blank as show in image,previously these videos runs fine on symbian anna plz help plz help or tell me the way to downgrade to anna
Attachments:
scr000002.jpg 10 KB1) product code 059B7W0
2) software version 111.030.0609
3) it is actually stored .flv files on my phone workes fine on symbian anna
Attachments:
Scr000003.jpg 17 KB
Scr000004.jpg 15 KB -
Anyone has any problem after updating to iSO 4.3.1 ?
anyone has any problem after updating to iSO 4.3.1 ?
I would like to know before updating mine.My 3G kept freezing after iSO 4.2.. and after reading the forums I updated both my Itunes and software to iOS 4.3.1, now I've lost my notes, contacts, calender entries and so far in the last ten minutes it's turned off and restarted itself and sync'd continually about 5 times.
So basically I'm still where I was before only more cranky. In addition, I live in Australia and there are no Genius places here, there is no support from Apple unless you pay for it even by an email, you basically end up fending for yourself under a supposed warranty that isn't worth the paper its printed on.
It you haven't already guessed, I'm more than a little ****** off.
If I'd known how much trouble this was going to be, I don't think I would have spent the $400 odd dollars to buy it.
If its not right by the weekend I'm taking it back to the shop I bought it. -
After updating software, Maverick 10.9.4, on my Mac, it is very slow especially opening apps. Any recommendations?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting. -
Microsoft Office 2011 no longer opens because "there is a problem" after updating mountain lion when the app store said there was an update available this morning. Reinstalling did not work. What's the problem?
Has your problem been solved by the updates??
Have a similar problem. This MacBook opened all MS Office programs in Dec2012 but no longer does in Feb2013. Went to Microsoft/mac/downloads but none of the three updates would run citing a problem "version of software needed to run this update was not found on this volume".
MacBook: 7.1, Intel Core 2 Duo, 2.4 GHz
Microsoft Office 2011: version 14.2.3
Mountain Lion: 10.8.2 (12C60) -
After updated software on mac mini with os x 10.7.5 and restart the mouse pointer after about 30 sec. converted to the rainbow wheel and I can't control the computer. The rainbow wheel was runnig 8 hrs and I turn off mac mini by power button, then I turn on mac mini with key Shift and p/w, checked HD. My HD has
capacity 499.25 GB used 86.91GB. Is there a solution to fix this problem axcept the reinstall os?Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in safe mode.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
for k in /Sy*/L*/Ex*/{,.?}*.kext; do test -f "$k/Contents/Info.plist" && /usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$_" | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo $k; done | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
sudo defaults read com.apple.loginwindow LoginHook | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
Repeat with this line:
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 4
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null | open -f -a TextEdit
Remember, Steps 1-4 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal. -
there is no sim card installed in the iphone error after update software from 4.1 to 5.01(iphone 3gs)
Thanks for reply, but problem is diffrent I got updated my device via I tune(IPSW 5.01) before that, it was working well after upgreade 4.1 to 5.01 I am getting problem. No cydia no signal!
BTW Thank you,
Maybe you are looking for
-
HI All, To fetch the fallowing required fields from the related tables by the selection criteria Material No and Posting dates. Using ALV. I have written code for that but its not showing any results..plz go through my code and if possible rectify it
-
I have just subscribed to Adobe Export and my debit card has been charged but I cannot convert a pdf into a word format on my mac. Does it take time to process?
-
Need to show a data in weeks for stacked column
I need to show the data broken down in weeks if you choose the start date and end date. I have to show in a stacked column chart. I am trying to show the values if you choose for example last month i need to show it by weeks for example week
-
Itunes (11.2.2 for Macbook Pro 2012) I can drag and drop in finder and other applications. However, I can't select and then drag and drop individual (or groups) of songs, or playlists in Itunes. For example, when I want to drag a song from one playl
-
I had just updated my Mac to 10.6.1. When it finished, I had tried to open up Itunes but it says it requires 10.6.8 or later. When i had tried to update my mac it asked for my adiminstartor password. I dont know my password. Any way to reset it witho