Problem after upgrade from patch level 36 to 43

Hi,
  Recently our system is upgraded from 36 to 43 patch level. After this there are problem in doing hiring action, IT0000 is saving but the next infotype IT0001 does not gets saved and also no error message. So, really not able to figure out what could be the problem.
I was debugging the standard code i.e once the 'save' button is clicked in IT0001 in PA40, but in vain. I am not able to find out where or in which program/include the data gets saved in PA0001. If any one aware of this please let me know.
Since IT0001 is not getting saved, there are probs with IT0007 and IT0008.
Please let me know your views.
Thanks,
Arunsri

Hi Raju,
  Thanks for the reply. Ya, the problem was not due to upgrade,but some other issue. Not able to find till now. I checked IGMOD features and it is in 'Active' mode only. No luck.
Edited by: Arunsri on Jan 27, 2012 4:18 PM

Similar Messages

  • Problems after upgrading from 10.2.3 to 10.2.8

    After upgrading from 10.2.3 to 10.2.8, itunes "unexpectedly quits" when I try to purchase a song, and safari "unexpectedly quits" when I visit certain websites. Before upgrading, no such problems.

    Hello rick,
    First of all, welcome to the Apple discussions.
    * How did you upgrade the OSX 10.2.3??
    * Did you use the combo update?
    * Did you run the dick repair permissions before an after
    Here is the Combo Update for OSX 10.x
    Combo Update
    An here is how you use the disc repair permissions
    About Disck Repair Permissions
    Applications Quits
    Let me know if so ...
    Discussions is a ongoing process. Hope to see you around anytime you need us, or can offer help to others.
    Dimaxum <]:~))

  • List of notes after upgrading CIn patch level 22 to 27

    Hi
    We  want upgrade system from 470 CIN patch level 22 to 470 CIN patch level 27.
    i would like to know what  will be the side effects and precautions to be taken for MM prospective wise. i also wanted know after upgradtion what all the notes required to be applied for new secondary and higher education cess. i need side effects of upgradation, precaustions and list of notes after upgradtion.

    Dear,
    You may have a look at the "Side Effects" report which is available in SAP Service Marketplace at http://service.sap.com/swdc-addinfo
    -> SAP Support Packages in Detail
      -> Side-Effects of SAP Notes
    There you can define the source/target queues of support packages .
    This report provides an overview of currently known side-effects of SAP Notes contained in a Support Package. The list also includes pointers to other SAP Notes, which are able to resolve undesired side-effects.
    i hope that helps.
    Lucio Rodrigues
    SAP AGS

  • Search Service Application problems after upgrading from Foundation to Enterprise edition of SharePoint 2013

    Hi all. I have been searching for days for a solution to a problem I am having with SP2013 Enterprise edition.
    We recently upgraded from SP2013 Foundation to SP2013 Enterprise. After the upgrade, the search services are no longer working and we are receiving many application log entries indicating the following:
    Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (ea2019ef-bb9e-4efe-85ee-5d2307406f31).
    Reason: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
    Technical Support Details:
    System.UnauthorizedAccessException: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
       at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
       at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
    as well as:
    Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (ea2019ef-bb9e-4efe-85ee-5d2307406f31).
    Reason: The object you are trying to create already exists. Try again using a different name.  
    Technical Support Details:
    System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.  
       at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
       at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
    I have tried to remove the search service application and recreate it, and even though the SharePoint Central Administration states that it was created successfully, I am still getting the same errors in the log. If I go to the Search Service Application
    Search Administration page, the "System Status" shows the following message:
    The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component '0359af35-0982-4ede-8838-b1d390e915bf' in search application 'Search Service Application' is in a good state and
    try again
    Additionally, under the "Search Application Topology" section, it states "Unable to retrieve topology component health states. This may be because the admin component is not up and running" which I assume is normal if the admin is not
    running.
    Does anyone know how I can resolve this problem? 
    Thanks!

    Hi Joaquin,
    According to your description, the error occurred when you re-created the Search Service Application.
    Based on the error message, I recommend to verify the things below:
       1. Check if the association between the Search Service Application proxy and the web application is configured.
    Please go to Central Administration > Application Management > Configured service application associations > Click Default to see if the Search Service application is checked.
       2. Change the app pool for the Search Service Application to SharePoint Web Services Default in the properties of the Search Service Application.
    Please go to Central Administration > Application Management > Manage service applications > Highlight the Search Service Application > Click Properties in the ribbon > Change
    the two app pool to SharePoint Web Services Default: App Pool For Search Admin Web Service and Application Pool for Search Query and Site Settings Web Service.
        3. Run PS command to check if the search admin timer job is enabled: Get-SPTimerJob
    job-application-server-admin-service | fl. If it is not enabled, use PS command to enabled it and then reset Internet Information Services: Enable-SPTimerJob job-application-server-admin-service.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • AUTO_RUNSTATS: problems after upgrade from 8.2 to 9.5

    Hello guys,
    We're appreciating a problem in our recentley upgraded databases 9.5
    We've upgraded from release 8.2 and we have activated the following parameters:
    db2 UPDATE DB CONFIG USING AUTO_MAINT ON AUTO_TBL_MAINT ON AUTO_RUNSTATS ON
    Although we don't see auto_runstats running in database. How can I activate this issue? Isn't it enough to activate these parameters?
    regards,
    Filipe

    Hello Filipe,
    have a look at your dump directory, under events you find file like db2optstats(n).log
    db2 runstats on table DB2DDP.STMTS
    DB20000I  The RUNSTATS command completed successfully.
    2010-07-22-14.45.36.597065+120 E937346A585        LEVEL: Event
    PID     : 463098               TID  : 16547       PROC : db2sysc 0
    INSTANCE: db2ddp               NODE : 000         DB   : DDP
    APPHDL  : 0-38427              APPID: *LOCAL.db2ddp.100722124520
    AUTHID  : DB2DDP
    EDUID   : 16547                EDUNAME: db2agent (DDP) 0
    FUNCTION: DB2 UDB, relation data serv, sqlrLocalRunstats, probe:10
    COLLECT : TABLE AND INDEX STATS : Object name with schema : AT "2010-07-22-14.45.36.596771" : BY "User" : start
    OBJECT  : Object name with schema, 14 bytes
    DB2DDP  .STMTS
    IMPACT  : None
    2010-07-22-14.45.36.744115+120 E937932A665        LEVEL: Event
    PID     : 463098               TID  : 16547       PROC : db2sysc 0
    INSTANCE: db2ddp               NODE : 000         DB   : DDP
    APPHDL  : 0-38427              APPID: *LOCAL.db2ddp.100722124520
    AUTHID  : DB2DDP
    EDUID   : 16547                EDUNAME: db2agent (DDP) 0
    FUNCTION: DB2 UDB, relation data serv, sqlrLocalRunstats, probe:220
    COLLECT : TABLE AND INDEX STATS : Object name with schema : AT "2010-07-22-14.45.36.743863" : BY "User" : success
    OBJECT  : Object name with schema, 14 bytes
    DB2DDP  .STMTS
    IMPACT  : None
    DATA #1 : String, 49 bytes
    RUNSTATS ON TABLE "DB2DDP"."STMTS" ON ALL COLUMNS
    this is a manual runstats, you will also a ot of fabricated runstats.
    Here is an output from db2 get db cfg for <SID>:
    Automatic maintenance                      (AUTO_MAINT) = ON
       Automatic database backup            (AUTO_DB_BACKUP) = OFF
       Automatic table maintenance          (AUTO_TBL_MAINT) = ON
         Automatic runstats                  (AUTO_RUNSTATS) = ON
           Automatic statement statistics  (AUTO_STMT_STATS) = ON
         Automatic statistics profiling    (AUTO_STATS_PROF) = OFF
           Automatic profile updates         (AUTO_PROF_UPD) = OFF
         Automatic reorganization               (AUTO_REORG) = OFF
    Best regards,
    Joachim

  • Mail flow problem after upgrade from cu1 to sp1

    I have update Exchange server 2013 CU1 to SP1 (CAS Role). After upgrade mail cannot flow. all the mail are stuck.
    CAS server use to mail flow outside and receive from outside. but The problem is this CAS server mail flow not work after upgrade exchange server 2013 CU1 to SP1.
    Please give suggest.
    Thanks

    I didn't connect to queue viewer as because the version of exchange 2013 server are different. in the environment two CAS server and two Mailbox server. i just update one CAS server into SP1. and another CAS in CU3. Mailbox 01 is CU3 and Mailbox 02 is CU
    1. So their is version difference in the environment.
    So, when i update CAS server to SP1. That server is not working for mail flow.
    Please suggest.

  • Problems after upgrade from SCVMM 2012 Sp1 to SCVMM 2012 R2

    I did a in-place (uninstall VMM2012 Sp1, retain the database, and install VMM2012 R2 point to old database) upgrade. All the steps work fine.
    The only problem (so far) is that when I create a new VM using a custom template (for example, Windows 2008 R2), the deploy fail with the following error:
    Error (2912)
    An internal error has occurred trying to contact the vm-scvmm2012.domain.com server: NO_PARAM: NO_PARAM.
    WinRM: URL: [http://vm-scvmm2012.domain.com:5985], Verb: [INVOKE], Method: [GetError], Resource: [http://schemas.microsoft.com/wbem/wsman/1/wmi/root/microsoft/bits/BitsClientJob?JobId={56B8E488-5DB9-4CC1-BEFA-AFF76E1E4D2D}]
    Unknown error (0x80072f0d)
    Recommended Action
    Check that WS-Management service is installed and running on server vm-scvmm2012.domain.com. For more information use the command "winrm helpmsg hresult". If vm-scvmm2012.domain.com is a host/library/update server or a PXE server role then ensure
    that VMM agent is installed and running. Refer to http://support.microsoft.com/kb/2742275 for more details.
    Information (26278)
    VMM could not offload transfer the file \\vm-scvmm2012.domain.com\MSSCVMMLibrary\VHDs\Template_Windows_2008_R2_SP1.vhdx to C:\ClusterStorage\Volume1\VM-NEWVM\Template_Windows_2008_R2_SP1.vhdx.
    Any ideas?

    I have a similar problem when migrating VMs from Windows 2008 R2 (Non Clustered) Hyper-V to Windows 2012 Hyper Cluster. I had previously migrated about 100 VMs like this with no problem. It appears since upgrading from VMM SP1 Rollup 4 to Rollup 5 this problem
    is happening. All Agents are up to date.
    I can migrate VMs in the cluster no problem.
    I removed the Windows 2008 R2 Hyper-V host and added it back which allowed the job to at least start but when it gets to the final steps of importing the VM it fails with the same error and references the VMM server.
    Others suggest this is a VMM Certificate problem and you can remove the Cluster node and add it back again but I can't do that in a production Cluster with hundreds of VMs. That is not an acceptable solution.
    How can we fix this?

  • Perfomance problem after upgrade from 9.2.0.6 to 9.2.0.8

    Hi,
    we have upgrade our RDBMS from 9.2.0.6 to 9.2.0.8, all our batch jobs became slow (plus 3hours on normal execution time of our query).
    any suggestions.
    Regards.
    tt

    I bet you just upgraded without any modification on parameters and/or way of gathering statistics. :)
    I know it's very embrassing and frustrating that Oracle sometimes gets slow after just upgrade.
    But it's designed to be that. Not to get slower, but to get faster.
    Enhancement is the only purpose of upgrade, isn't it?
    But there is always a chance that you hit some negative side effects of that enhancement.
    For instance, optimizer gets equipped with new powerful query transformation algorithm.
    But in very rare cases, it causes some queries got slower.
    It has always been happening and l believe it will also happen with 11g. :(
    The unfortuante thing is that there can be amazingly many reasons why Oracle gets slower after upgrade.
    You need to search metalink for similiar issues and check statistics and execution plans as stated above.

  • Selection scren problem after upgrading from BW 3.0 to 3.5

    hi,
    We recently upgraded from 3.0 to 3.5. We haev a workbook with 8 queries and we used to get only one selection screen for all the queries(we one slection query which has all the variables of other queries) on refresh of all queries.But now after upgrading we get screens for each query.Any solution pls.
    venku

    hi deepak,
    Can u help me more on this issue of finding the OSSNotes.I dont know where to find this.
    thank you
    kranthi

  • B18.8  DB upgrade from Patch level 12 to 15 Patch level

    Dear Experts,
    When I am trying to Upgrade database 8.8 PL 12  to SAP 8.8 PL 15 following are error.
    I had completed the Downloading process of 8.8 patch level of 15.
    WINRAR Diagnosis Error...................
    !   C:\Documents and Settings\amol(sap)\My Documents\Downloads\B18800_21-10003894.ZIP: The archive is either in unknown format or damaged
    Please suggest.
    Regards
    Amol

    Hi,
      The setup file has corrupted so better you again download the file using SAP Download Manager.
    *Close the thread if issue solved.
    Regards
    Jambulingam.P

  • Problem after upgrading from 4.2 to 4.2.2

    I just recently did an upgrade from 4.2 to 4.2.2 running on an Appliance. After the upgrade all the services do not load up. Running a "show app status LMS" always comes up with a message saying daemon manager is not fully intialized. The DCRServer process is just hanging with the status "waiting to initialize".                 
    I am able to GUI in but can't use view any of the managed devices due to DCRServer in a hung state. I have restared LMS application multiple times. I have stopped LMS application and then reloaded the box. The issue still keeps occuring, im going to raise a TAC case but was wondering if anyone else has come across this issue?

    Are you still facing the above issue ?
    If yes send me the below information.
    output of pdshow
    ctm_config.txt  from the below location:
    NMSROOT\CSCOpx\MDC\tomcat\lib
    NMSROOT\CSCOpx\MDC\tomcat\shared\lib
    NMSROOT\CSCOpx\MDC\tomcat\webapps\cwhp\WEB-INF\lib
    Also md.properties and Regdaemon.xml
    Thanks
    Afroz

  • JMS Receiver FCC Problem After Upgraded from SP19 to SP22 in XI3.0

    Hello,
    I am facing a problem in my Receiver JMS adapter in FCC just after the upgrading it from SP19 to SP22 in XI 3.0 by our basis consultant. Before that everything was working perfect in DEV.
    I am getting the below mentioned error in CC monitoring.
    > MP: Exception caught with cause com.sap.aii.messaging.adapter.trans.TransformException: Error converting Message: 'java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.NullPointerException''; nested exception caused by: java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.NullPointerException'
    This problem is happening in other scenario too in our DEV system.
    But at the same time since we have not applied any upgrade in QA therefore same scenario is working fine.
    Regards,
    Sarvesh

    Ok Friends...
    I got the solution from SAP.. there was a problem in the SP22 for XI 3.0 which I donloaded from Service Market Place. Now I have applied the correct SP22 to my system and now it is working fine...
    I hope this may help you...
    Regards,
    Sarvesh

  • [SOLVED] KDE problems after upgrade from 4.10.0-1 to 4.10.1-1

    Hi guys, after updating KDE ihave the following problems:
    1. The widgets are unable to load (red cross icon) everywhere at desktop, at panel.
    2. Panel need to be removed and added after boot.
    3. The programs does not displaying at task manager.
    4. Programs can not executed from quiq launch (alt+F2).
    I have try to downgrade from cache it but it not works for me ((
    Full removing KDE using pacman -Rsc and reinstating also does not work ((
    Last edited by S1Lv3R (2013-04-03 20:35:30)

    Inxsible wrote:are you fully updated ? or have you performed partial upgrade?
    i not sure i have run the following command:
    pacman -Sy kde

  • Problem after upgradation from Oracle 8.1.7 to Oracle 9i

    Hello ,
    I currently installed Oracle 9i, and i m using Mapx 4.5,
    and in the executable I am adding serverlayer
    (a layer formed by querying the geoloc column from oracle
    table), which was working fine with Oracle 8.1.7, but after
    installation of Oracle 9i , i encounter the following error
    while adding a serverlayer
    ORA-13373 Element of type Extent is not supported for Geodetic
    data
    Cause: Element type extent for a polygon geometry is not
    supported for
    geodetic data.
    Action: Convert the extent type polygon to a regular 5 point
    polygon
    and set
    etype accordingly.
    ORA-06512 at string line string
    Cause: Backtrace message as the stack is unwound by unhandled
    exceptions.
    Action: Fix the problem causing the exception or write an
    exception
    handler
    for this condition. Or you may need to contact your application
    administrator or database administrator
    Can anybody tell me what's going wrong ?
    As I urgently got to fix it.
    Thanks in advance
    Binoy.

    Hi,
    Oracle9i has a geodetic data model. Your data has a geodetic
    srid, which means that the data will need to conform to the rules
    associated with geodetic data. These rules include:
    No optimized rectangles are supported (my guess is the app is
    using an optimized rectangle as a query window, but the data
    could be the issue also).
    No arcs or circle types are supported.
    A single line segment cannot be equal to or greater than 1/2 the
    great circle distance.
    A polygon cannot have an area equal to or greater than 1/2 the
    surface area of the earth.
    You should try to find what version of Mapx supports Oracle9i.
    Regards,
    dan

  • Phone problems after upgrade from 8.5 to 9.0

    Hi everyone,
    I upgraded our UCCX cluster last week from 8.5 to 9.0, and ever since then I've been getting reports of delays when answering a call (up to ~10 seconds). I also have one user that reports not being able to hangup at the end of a call (has to wait for the customer to terminate the call). Any ideas?
    CUCM Version: 9.1.1.20000-5
    UCCX Version: 9.0.2.11001-24
    Also, I have ran the JTAPI resync to ensure that wasn't the issue.

    Thanks for the input guys, but it ended up being a weird problem resulting from extension mobility. When I upgraded the cluster, I forgot to deactivate extension mobility, and this apparently confused CUCM. Our agents use extension mobility in order to allow for moving between physical phones and IP communicator, and the CDA records showed call transfers from the CCX being routed through the subscriber (which is at a remote WAN site) before reaching the phones using extension mobility. Deactivating the service on the entire cluster, rebooting the cluster, and then reactivating the service fixed the issue.

Maybe you are looking for