Problem appeared with ipod

Hello.
After a week of using my ipod shuffle something happend and now when i upload music to it - if the used capacity is 419.9 MB then when turning ipod on and pressing PLAY the light flashes as if no music is there. after reseting the ipod, the music does play. but unless i change used capacity the next time i sync with itunes, i have to reset ipod each time (each time i sync), for it to play music.
What can be the problem? Can it be damaged memmory at 419.9 MB?
Please help!

i found the diagnostics tool in itunes and ran ipod diagnostic. the output is:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
To Be Filled By O.E.M. To Be Filled By O.E.M.
iTunes 7.4.2.4
iPodService 7.4.2.4 is currently running.
iTunesHelper 7.4.2.4 is currently running.
Current user is an administrator.
The current local date and time is 2007-09-24 17:17:03.
Connected Storage Devices:
Disk drive, WDC WD2500KS-00MJB0, Bus Type ATA, Bus Address [0,0]
Disk drive, Apple iPod USB Device
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No IEEE 1394 Host Controller found.
To see more details, click Save and then open the saved file.
What do the last lines mean?

Similar Messages

  • Problem synchronizing with iPod

    A user is have quite a few problems synchronizing with his iPod.
    He is only able to sync if he logs in as an administrator (he has two accounts on the machine), runs iTunes, cancels the sync (the administrator account doesn't have the music files), closes iTunes, logs on again with his regular account, and opens iTunes again.
    It seems to be a permissions issue, but he does have administrator permissions on the folder when using his regular account.
    How should iTunes be set up so that administrator permissions aren't needed to sync with an iPod?
    In addition, is there a way to update iTunes software via the updater without administrator permissions?

    Is Fast user switching enabled on the PC?
    Checking on this because iTunes doesn't like Fast User Switching on XP or Vista. See:
    iPod for Windows: Fast user switching in Windows XP and Windows Vista is not supported

  • TS1363 Help with Problem encountered with iPod Touch 5th gen After performing  Sync.

    Hello Friends.
    My name is Joaquin. I was wondering if anyone can help with a problem I have encountered with my iPod Touch 5th generation running under OS 7.0.4.
    After performing a Sync, a lot of the song in my iPod showed a red icon beside the song. It is the same Circle with a square in the center icon that shows the download progress status that you see when updateing APPs, etc.
    The songs play perfectly in my computer library and in an old iPod Classic but not in the iPod Touch. The only difference was that when I connected the iPod I got a message stating something like "Transfer purchases from iPod touch to computer" despite of the fact that I did not make purchases from my IPod.
    I will really appreciate the help. I can´t survive without my music. Thank you in advance.
    Regards,

    Does the iOS device connect to other networks? If yes that tends to indicate a problem with your network. Yes
    Does the iOS device see the network?
    Any error messages?
    Do other devices now connect?
    Did the iOS device connect before? no
    Try the following to rule out a software problem:  (Not clear what you did)          
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    .- Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Wi-Fi: Unable to connect to an 802.11n Wi-Fi network      
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. Since it connects to other networks that indicates a problem with your network
    Apple Retail Store - Genius Bar

  • 3 problems happening with iPod, is it dying on me?

    I have a 30g 5th Generation iPod. A little while ago, I started noticing these problems occuring:
    1. Occasionally when I turn the iPod on, the songs will not start and the time bar stays at 0:00. I have to reset it by holding menu and the center button and then it will play songs.
    2. When watching a video, the battery lasts 15-20 minutes before saying the battery is dead and needs to be plugged in (was fully charged when started video). Sometimes, if I let the iPod sit for 10 minutes, it will have half a battery when I turn it on again.
    3. Occasionally I'll be listening to a song or watching a video and the iPod will randomly turn off, no battery dying or any other notice. It just turns off and then I have to trun it back on. (I do not have the auto-off setting on)
    I tried a restore but I have noticed all 3 problems again since the restore. Is there anything I can do to save my iPod or is it time to buy a new one?
    Thanks!

    Could you be more specific? What operating system? How are you starting
              weblogic? What do you mean by crashing?
              john
              "Jas" <[email protected]> wrote in message
              news:[email protected]..
              >
              >
              > Why is weblogic just crashing repeatedly with no message whatsoever in the
              > weblogic.log file? Now I can't run JSPs anymore although I can still
              > access my EJBs via a command line java program.
              >
              > If I restart the server I will be able to run my JSPs again for a few
              minutes
              > before it crashes again.
              >
              > can somebody help me out here?
              >
              

  • Anyone had this problem? With iPod Classic?

    Don't normally do this, but I'm posting this in two places, iPod Classic and GarageBand because I think both of those audiences might have encountered this.
    1) Let's say I have +Song A+, recorded in GarageBand, with a tenor sax already in iTunes;
    2) I decide to add a flute. Do so in GarageBand;
    3) I keep the title of the song the same: +Song A+;
    4) I go to iTunes and delete +Song A+ (which just has the tenor sax);
    5) Back to GarageBand, and send +Song A+, with flute added, to iTunes;
    6) It's there. Plays +Song A+ with both sax and flute;
    7) Hook up the iPod Classic, it syncs but ...
    8) It plays version one of +Song A+, just the tenor sax, no flute;
    9) Why? This is the way I've always done it, with no problems.
    10) The only way I could get the new version of +Song A+ onto the iPod was to rename it: +Song B+. Then it was there. But that shouldn't have been necessary, at least from my past experience
    Is something not right with my iPod Classic?

    nemateoz wrote:
    Why?
    i'm not sure what criteria iTunes uses to detect changes, but the name would be one, perhaps creation date (and other things?). only "changed" songs are synced (otherwise the entire library would be x-ferred every time you sync)
    10) The only way I could get the new version of +Song A+ onto the iPod was to rename it: +Song B+.
    i would try adding 1 step: delete the song from iTunes, sync, then add the new version to iTunes and sync.

  • My kid just got an iPod 5th gen (today from Santa) and it won't power up or charge. The only response is when I connect the USB and press the power button or front button the Battery appears with red line and lightning symbol. No other response at all.

    Sorry about the long title.....its my first post.
    My kid just got a brand new iPod 5th generation (today from Santa) and it won't power up or charge. The only response is when I connect the USB and press the power button or front button the Battery appears with red line on left and lightning symbol below. There is no other response at all no matter what I do, including holding both buttons down for extended period.  My other kid got one and it works perfectly.....I have interchanged usb cables ports etc. but still no response....I would really appreciate any help.  

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    -  Make an appointment at the Genius Bar of an Apple store since you have a hardware problem with the iPod. This is because as you said the same cable works with another iPod.
    Apple Retail Store - Genius Bar

  • Can anyone help me with iPod/iTunes syncing problems after recent software update?

    Hi there,
    I wonder if anyone can help me.  Last week I updated my iPod to the latest software (8.2).  Today I deleted some albums from iTunes and added a few others.  I also made some changes to a few of my playlists.  I then synched iTunes and my iPod.  However the synching has not worked. 
    When I connect my iPod, it shows up in iTunes pretty instantly.  When I click on sync, I can see in iTunes that it is syncing and also on my iPod, but the changes do not appear on my iPod afterwards.  Also, after the first syncing attempt, I lost two-thirds of my album cover art.  So, I lost covert art, but no other changes were made.  The albums I deleted from iTunes are still on my iPod and the ones I added to iTunes are not on my iPod. 
    I have looked at the music on my iPod while connected to iTunes.   I can see the songs/albums I have added are there, but they appear in grey and have a doted circle (to the left) next to them.  This shows that they have not synched (I guess). 
    I have already restarted my McBook Pro and iPod a few times.  I synched my iPod with iTunes after every restart, but it has not made any difference.  I also deleted the music I added to iTunes and added it again.  I synched iTunes and my iPod after this, but it has made no difference. 
    I would appreciate any suggestions. 
    Many thanks
    Summary: 
    Updated iPod to iOS 8.2. 
    Made changes in iTunes i.e. delete and added music
    iTunes and iPod show they are synching, but changes to not appear on iPod. 
    Also lost cover art on iPod after synching. 
    Products:
    iPod Touch, latest generation
    iTunes 12.1.0.50
    MackBok Pro OS X Mavericks (10.9)

    Thank you for your reply.  I followed your suggestion and restored my iPod to its factory settings.  I then restored it from a backup file.  All the problems have been resolved.  Quite incredible that I had to go through that process to fix it.  I hope Apple will find a solution to the iTunes problem soon. 

  • My ipod touch(4th gen) just recently had the iOS 5 update.bu for some reason about 80% of my music collection appears with no album artwork and doesnt play any songs.basically it has my music on their but wont let me access it? please help!

    My ipod touch(4th gen) just recently had the iOS 5 update.bu for some reason about 80% of my music collection appears with no album artwork and doesnt play any songs.basically it has my music on their but wont let me access it? please help!

    i have the same problem but i have ios 5.01. how do you unsync? please help, thanks

  • Having problem with Ipod Sound

    I am having a huge problem with the sound for my Ipod. I was recently at a concert and using my car audio conversion in both my Ipod and my girlfriends, when I unplugged it from hers to mine I lost all sound to my Ipod when I plug in my headphones now or when I put the receiver back into the bottom. I have reset and restored it and run the diagnostics check to see if it could be the USB or the headphone Jack. Both are in working order but I am still not getting any sound to my Ipod. Can anyone help me with this problem? My Ipod is my life staple for my morning commuet.

    You can try to following to rule out/fix a software problem:
    - Reset. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory defaults/new iPod
    If still a problem you very likely have a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Weird problems with ipod classic 80gb, hdd's gone?

    Hi, hope u could help me.
    Excuse my not fluent english, I'm not british/american so I will try to make myself as clear as possible. Thanks
    First of all, got iPod classic 80gb, systems Vista/XP, was trying to cope with this problem on both computers, but ran out of ideas, so decided to make a topic on Apple forum.
    Few days ago my iPod was working fine, then I put some stuff on it (put them in 'Notes', using iPod as a pendrive) and weird things started to happen. Maybe it has something to do with it, don't know, but will try to write as many details as possible.
    When I connect my iPod to the computer (i tried on 3 computers), every time my Windows doesn't recognize an iPod (computer sees something has been connected, but doesn't see what). So if I go to 'Computer' I even do not see an iPod disc.
    I can't open iTunes when iPod is connected, but once I disconnect my iPod, iTunes opens immediately. If I open iTunes before connecting an iPod, iTunes works fine but it can't see an iPod as well. (I used an option with checking connection with iPod but it sees nothing unfortunetely).
    Later, when I want to disconnect my iPod using 'safe remove hardware' it doesn't work, just hangs.. so I have to unplug my iPod and once I do it, it immediately appears 'USB xxxxx now can be disconnect safely' (something like that, very similiar to the iTunes case).
    When I disconnect my iPod, it just hangs showing 'Connected, do not disconnect', sth like that, so I got to restart it and then works fine.
    My iPod works fine without connecting to the computer, everything is just fine.
    Any ideas? Already tried to reset settings on iPod and tried to re-install iTunes, but I guess problems lays somewhere beetween iPod and computer which doesn't see my iPod.. Also I tried to re-install USB slots/drivers, didn't help.
    Thanks in advance.
    Cheers, Robert.
    Message was edited by: TheBadkins
    Message was edited by: TheBadkins

    When I had Windows XP on a Lenovo, I also had a U2 20Gb iPod...The problem was, believe it or not, the battery! I took it to ipodrepair in Toronto, and they said there was some servo or switch that was blown. It couldn't charge properly and when it was connected to the computer, it went into limbo - not able to charge, not able to load the ipod.
    So, check with repair if you can...It may be the battery, even on a new one!
    Good Luck!

  • 2 Problems with iPod Mini

    well, I recently encountered 2 problems with my iPod Mini.
    #1- It says the battery is charged, but dies out as soon as I start to play a song
    -And-
    #2- (the reason I joined this forum) just about 4 minutes ago, The screen has that black Apple logo on it, but it stays there forever. I reset it, but when the logo appears, it still stays there. I plugged it into my computer, and the logo is still there. It dosent respont what so ever. I cant even turn it off. Please tell me how to fix it.
    "HOORA!"
    Thanks- Marine

    For your battery issue:
    If your iPod is old, the battery is probably just worn out and needs replaced.
    After about 400 charge cycles, the battery is only able to hold up to 80% of its charge. After even further charge cycles, the battery can hold less and less.
    Read more about it at these pages:
    iPod Battery FAQ
    Getting the most from your iPod battery
    General iPod battery information
    If your iPod is out of warranty, Apple can replace your iPod with the same model and a new battery for $59 and $6.95 for shipping. If it is in warranty, there will be no service charge, but there may be a shipping fee.
    For Apple to replace your battery, go here:
    http://depot.info.apple.com/ipod/
    3rd parties can also replace your battery with a generic battery for lower costs. They also sell DIY kits so you can replace it yourself, and never have to send it in.
    Note that those Support articles are a tad outdated, so while their information is about the same, exact number figures may be off (Example: they say battery life can last 8-12 hours. New models can last about twice to three times that.)
    For your second issue: (I don't have a premade message for this :P )
    It sounds like the formatting messed up or the hard drive is failing. Reset it again, and as soon as the Apple logo pops up, hold the center and Play/Pause buttons until it goes into Disk Mode (if it doesn't get into disk mode, you really have problems, likely with your motherboard). If it gets into Disk Mode, plug it into a computer and use iTunes to restore it.
    Try that and let me know how that works for you.

  • Hello, I have a problem 4th with my iPod touch

    Hello,
    I have a problem 4th with my iPod touch
    I just wanted to edit a picture, and then he is always crashed.
    Hope someone can tell me what to do.
    THX, Soundwave1409

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • HELP please! :) My ipod gets like lock, everything appear with lines, I already restore like three times the ipod and still happens the same, what can I do? and on some app store they just told me that restore, but well I do and is the same!

    My ipod gets like lock, everything appear with lines, I already restore like three times the ipod and still happens the same, what can I do? and on some app store they just told me that restore, but well I do and is the same! What can I do?? and is new, I buy it on march!
    This is a image of the ipod already restore, and everytime looks like that!

    If restoring the iPod to factory defaults/new iPod dow not solve the problem you likely have a hardware problem.  In that case either make an appointment at the Genius Bar of an Apple store or call AppleCare.  If defective, Apple will replace your iPod at no cost.

  • Download problem with iPod Touch January software update

    Hi, some problems with the software update. Please advise
    - Ipod Touch user from australia
    - went for holidays in malaysia for a while and purchased the software update via itunes australia
    - The download did not start but i was charged $25AUD
    - Returned to australia, attempted the download again but failed because itunes stated that the update has already been downloaded.
    - Attempted to update the iPod Touch by clicking on "Check for Update" but software has already been updated to the current version (1.1.3).
    - The new applications did not appear on iPod Touch.
    Thanks in advance!

    Hi pdra05,
    Do you manually manage your music?
    iTunes has to sync to unlock the January software, manually manage music has to be deselected.
    Make sure your content on your ipod is backed up before sync.
    [Installing and verifying the iPod touch January Software Upgrade|http://docs.info.apple.com/article.html?artnum=307243]
    fern

  • The problem I have since I upgraded to Mavericks version 10.9.1 The problem appears only with Mail not with other programs, not even with my browser. When I try to zoom the text of an e-mail I received or sent , I can no longer use the keys Command   to e

    the problem I have since I upgraded to Mavericks version 10.9.1
    The problem appears only with Mail not with other programs, not even with my browser.
    When I try to zoom the text of an e-mail I received or sent , I can no longer use the keys Command + to enlarge the text, although I can reduce it with Command -.
    As I have a problem with my eyes, This is a serious matter for me.
    When I write an e-mail, if I select text and press Command +, it just displaces the text to the right.
    Now, my husband has a USB keyboard. If he connects it to my computer, his regular Command + does not work either, but  he uses the extended keyboard, then it works. Unfortunately, he needs it for a musical application which does not work with a wireless keyboard.

    Firefox 3.6.4 and 3.6.6 use a process called, "plugin-container.exe" which was using up most of my CPU when I opened up multiple tabs that contained Adobe Flash files, and caused Firefox to lock up.
    My solution was to use Firefox 3.5.10 which you can get from the Mozilla website at [http://www.mozilla.com/en-US/firefox/all-older.html]
    I am using Adobe Flash 10.1.53.64 without any problem in this version of Firefox. Check the release notes, I believe it contains all the latest security fixes in "Firefox 3.6.4".
    Hopefully, they will fix Firefox 3.6 in the next version (e.g. Firefox 3.6.7), until then you should probably use "Firefox 3.5.10".

Maybe you are looking for

  • Desktop library no longer showing up on laptop home sharing is enabled on both computers

    my desktop library is no longer showing up on my laptop. Home sharing is enabled on both computers. The laptop library DOES show up on the desktop computer. The solution given in itunes help doesn't help. there is no box under edit, preferences, shar

  • Selecting "Information" gives Quicktime popup window. What's wrong?

    I am using a freshly installed copy of Pages (from App Store) on a MacBook Pro 13" (2011). The first operation after startup already fails. When I select "Information" (via icon or menu) I get the popup window belonging to Quicktime featuring (transl

  • How to i get my printer online

    How do i get my printer to scan documents to my laptop.  it says my printer is offline.

  • Consignment Process and drop ship?

    Gurus, I have a scenarios here where i need your support to give some feedback and suggestion to me on how this can be handle using standard SAP process.. Biz have 2 vendors, let's call V1 and V2. Biz have one product initially was build in house but

  • SAP HANA Spatial Features (Store Error)

    I've been stumbling with an the folowing error : "Error: SAP DBTech JDBC: [2048]: column store error: search table error: " over and over again. Every time I add a spatial column to a table it becomes unsuable (can't query, edit, add, update) so I ha