Problem applying 10.1.2.3 Patchset to 10.1.2 ORACLE_HOME

Upgraded OPatch to 1.0.0.0.64
Attempted to apply 10.1.2.3 patchset 5983622
Encountered 2 issues, 1 has prevented us from continuing
Issue 1: Received following on stdout ...
failed to get the ias-instance ...
Error: no ias instance to append to
Val: 3
Issue 2: When running the Configuration Assistants, it fails right away on step "Run One-Off Patches".
It's looking for the ocm.rsp. Received the following:
Oracle Configuration Manager (OCM) is included with this release of OPatch.
This is a OCM patch.
EBS environment: no OCM installation and configuration.
To run in silent mode, OPatch requires a response file for Oracle Configuration Manager (OCM).
Run /u04/app/ebupg/ebupgora/10.1.2/OPatch/ocm/bin/emocmrsp to generate an OCM response file. The generated response file can be reused on different platforms and
in multiple OPatch silent installs.
To regenerate an OCM response file, rerun /u04/app/ebupg/ebupgora/10.1.2/OPatch/ocm/bin/emocmrsp.
ERROR: OPatch failed because of cmd. args. problem.

TooManyOracleToysToLearn wrote:
Upgraded OPatch to 1.0.0.0.64
Attempted to apply 10.1.2.3 patchset 5983622
Encountered 2 issues, 1 has prevented us from continuing
Issue 1: Received following on stdout ...
failed to get the ias-instance ...
Error: no ias instance to append to
Val: 3Did you source the correct env file before applying the patch? --> $INST_TOP/ora/10.1.3/<CONTEXT_NAME>.env
Issue 2: When running the Configuration Assistants, it fails right away on step "Run One-Off Patches".
It's looking for the ocm.rsp. Received the following:
Oracle Configuration Manager (OCM) is included with this release of OPatch.
This is a OCM patch.
EBS environment: no OCM installation and configuration.
To run in silent mode, OPatch requires a response file for Oracle Configuration Manager (OCM).
Run /u04/app/ebupg/ebupgora/10.1.2/OPatch/ocm/bin/emocmrsp to generate an OCM response file. The generated response file can be reused on different platforms and
in multiple OPatch silent installs.
To regenerate an OCM response file, rerun /u04/app/ebupg/ebupgora/10.1.2/OPatch/ocm/bin/emocmrsp.
ERROR: OPatch failed because of cmd. args. problem.Error Applying Patch Using OPatch "This version of OPatch is obsolete", "OPatch failed because of cmd. args. problem" [ID 762403.1]
10.1.4.3 Patch Set Pre Installation Step: dcmctl updateconfig FAILS: Fatal Relocation Error [ID 849474.1]
Getting Error 'OPatch requires a response file for Oracle Configuration Manager (OCM)' while Running OPatch [ID 727991.1]
Thanks,
Hussein

Similar Messages

CS4 Master Collection - Problem Applying Updates

Hi
I'm running the CS4 Master Collection on Windows Vista Ultimate 32-bit, SP2.
Normally I have no problem applying updates to the various Adobe components when they become available, however for a while now I've been unable to instal an update that's reported as being available for Adobe Media Encoder 4.1.0.
If I run the "check for updates" manually I can download the update (reported as being 63.7MB) and when I attempt to instal it the installation process appears to run. It finishes after a while and the Adobe Updater reports "The Udating Process is Finished" in a single dialog box with a single button entitled "Quit" - which seems odd as "Quit" implies "finish earlier than planned", I'd have expected something more in line with "All done", something like "OK".
Anyway, when I run the check for updates again I'm told about the same update implying that it wasn't applied successfully.
I get this behaviour whether I run the update as an Administrator or not (all other updates for other products are applied without problem). I also get it regardless of whether or not I reboot the machine after trying to apply the update.
Does anyone have any suggestions on what could be causing the problem ? I couldn't find anything obvious or obviously relevant in any of the Windows event logs on the PC.
Thanks for any ideas
Steve

I am having the same problem. I found a forum that suggested this. Apparently it worked for some people, but not for me. Let me know if it does:
1. Start -> All Programs -> Accessories
2. Right-click on Command Prompt and select "Run as..."
3. Run as Administrator (even if you are logged in as Admin. You need to run in the Black Command Prompt, not the White one)
4. Run: regsvr32 JScript.DLL
5. Then run: regsvr32 vbscript.DLL
(dont forget the spaces, or it won't work)
6. Then try running the set up again
As i said, it worked for some on the forum, but not others (like me). Try it and see if works for you

Problem applying web template

We've recently upgraded from SharePoint 2010 to 2013. We created a new site under the 2013 environment then created a template from it. When we try to apply that template to a new site we get the following error:
Problem applying web template
It then list the following features as not installed:
List Feature
Module Feature
Web EventReceivers Feature
Property Bag Feature
Here is a screenshot of the error
We haven't noticed any other issue up to this point. Any assistance would greatly be appreciated.
Thanks,
Bill

How many of those as solutions are from CodePlex? I think the property bag one is
http://featureadmin.codeplex.com
It has a 2013 upgrade on
http://pbs2013.codeplex.com
If its unclear what the other features these are, it may be worth running the feature manager. This will potentially enable you to identify and disable those solutions. The link is
http://featureadmin.codeplex.com
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

Problem Applying Profile - Windows computer Connecting to OSX Network

I have an Airport, whose network is being administered on my macbook pro, but my Dell Inspiron 1520 Laptop is not able to connect to due to "problem applying profile."
Is this because it has a g card trying to connect to an N network? Or due to it being windows connecting to osx?
Help

Make sure your Base Station is configured for b/g compatibility mode, if you are going to be using it with a computer only capable of b/g modes.
This error most certainly has nothing to do with "windows connecting to OS X" - which it is not. The PC running Windows is connecting to a base station, using industry-standard protocols, and not OSX.
Is this a PC from work, set up originally to connect to a company wireless network?
You can get a lot of hints and tips for issues that cause your problem by doing an internet search on the term "problem applying profile", because this is not an error message specific to users of Apple Airport base stations.

Problem applying changes in CS4

Hi everyone,
I have a problem applying changes in any document. I just can apply changes if I do zoom in or zoom out.
Can you help me please?

Turn off OpenGL in the prefenrences and update your graphics driver.
Mylenium

Problem applying SP05 for NW 7.1 CE EHP1.

Hello!
I have a problem applying SP05 for NW CE 7.1 ..
Below log the problem:
java version "1.5.0_14"
Java(TM) 2 Runtime Environment, Standard Edition (build 5.1.024)
SAP Java 64-Bit Server VM (build 5.1.024, Sep 4 2008 23:21:58 - 51_REL - optU - windows amd64 - bas2:106386 (mixed mode))
   INFO: Loading tool launcher...
   INFO: [OS: Windows Vista] [VM vendor: SAP AG] [VM version: 1.5.0_14] [VM type: SAP Java 64-Bit Server VM]
   INFO: Main class to start: "com.sap.lm.jspmadapter.standalone.UpdateEXEMain"
   INFO: Loading 36 JAR files: [
LOCALHOST\sapmnt\WCE\SYS\global\security\lib\tools\iaik_jce.jar,
LOCALHOST\sapmnt\WCE\SYS\global\security\lib\tools\iaik_jsse.jar,
LOCALHOST\sapmnt\WCE\SYS\global\security\lib\tools\iaik_smime.jar,
LOCALHOST\sapmnt\WCE\SYS\global\security\lib\tools\iaik_ssl.jar,
LOCALHOST\sapmnt\WCE\SYS\global\security\lib\tools\w3c_http.jar, C:\Program Files\sapinst_instdir\UPDATE\UPDATE\updatelibs\activation.jar, C:\Program Files\sapinst_instdir\UPDATE\UPDATE\updatelibs\com.sap.exception.facade.jar, C:\Program Files\sapinst_instdir\UPDATE\UPDATE\updatelibs\jax-qname.jar, C:\Program Files\sapinst_instdir\UPDATE\UPDATE\updatelibs\jaxb-api.jar, C:\Program Files\sapinst_instdir\UPDATE\UPDATE\updatelibs\jaxm-api.jar, C:\Program Files\sapinst_instdir\UPDATE\UPDATE\updatelibs\jaxrpc-api.jar, C:\Program Files\sapinst_instdir\UPDATE\UPDATE\updatelibs\jaxws-api.jar, C:\Program Files\sapinst_instdir\UPDATE\UPDATE\updatelibs\jsr173_1.0_api.jar, C:\Program Files\sapinst_instdir\UPDATE\UPDATE\updatelibs\logging.jar, C:\Program Files\sapinst_instdir\UPDATE\UPDATE\updatelibs\mail.jar, C:\Program Files\sapinst_instdir\UPDATE\UPDATE\updatelibs\saaj-api.jar, C:\Program Files\sapinst_instdir\UPDATE\UPDATE\updatelibs\sap.comsl.ut.infoprovider_lib.jar, C:\Program Files\sapinst_instdir\UPDATE\UPDATE\updatelibs\sap.comsl.ut.manager.offline.jar, C:\Program Files\sapinst_instdir\UPDATE\UPDATE\updatelibs\sap.comtcantlr.jar, C:\Program Files\sapinst_instdir\UPDATE\UPDATE\updatelibs\sap.comtcbloffline_launcherimpl.jar, C:\Program Files\sapinst_instdir\UPDATE\UPDATE\updatelibs\sap.comtcblopensqlimplStandalone.jar, C:\Program Files\sapinst_instdir\UPDATE\UPDATE\updatelibs\sap.comtcdddbdictionarydatabaseimplDictionaryDatabase.jar, C:\Program Files\sapinst_instdir\UPDATE\UPDATE\updatelibs\sap.comtcjeofflineconfigurationimpl.jar, C:\Program Files\sapinst_instdir\UPDATE\UPDATE\updatelibs\sap.comtcsdtcvlimpl.jar, C:\Program Files\sapinst_instdir\UPDATE\UPDATE\updatelibs\sap.comtcsecsecstorefsjavacore.jar, C:\Program Files\sapinst_instdir\UPDATE\UPDATE\updatelibs\sdt_jspm_c42adapter.jar, C:\Program Files\sapinst_instdir\UPDATE\UPDATE\updatelibs\sdt_jspm_rapi.jar, C:\Program Files\sapinst_instdir\UPDATE\UPDATE\updatelibs\sdt_sltool_rapi.jar, C:\Program Files\sapinst_instdir\UPDATE\UPDATE\updatelibs\sdt_trace.jar, C:\Program Files\sapinst_instdir\UPDATE\UPDATE\updatelibs\sdt_ucp_rapi.jar, C:\Program Files\sapinst_instdir\UPDATE\UPDATE\updatelibs\sdt_updclnt.jar, C:\Program Files\sapinst_instdir\UPDATE\UPDATE\updatelibs\sdt_util.jar, C:\Program Files\sapinst_instdir\UPDATE\UPDATE\updatelibs\src.zip, C:\Program Files\sapinst_instdir\UPDATE\UPDATE\updatelibs\tcwsstandaloneproxyimpl.jar, C:\Program Files\sapinst_instdir\UPDATE\UPDATE\updatelibs\updatewrapper.jar, C:\sapdb\programs\runtime\jar\sapdbc.jar]
   INFO: Start
RETURN CODES OF UPDATEXE
     RC_OK               : 0
     RC_ERROR          : 1
     RC_UP_TO_DATE     :2
PRINT ALL PARAMS -- BEGIN
-asUser Administrator
-osUser wceadm
-pathtoj2ee C:\usr\sap\WCE\J00\j2ee
-workDir C:/usr/sap/WCE/J00/work
-testsmp false
-sid WCE
-instanceName J00
-messageFile UpdateCommandline.message
-inboxdir
SERVER\c$\NW 7.1.1-SP05\EHP1 FOR SAP NW 7.1
-gfExeDir C:\usr\sap\WCE\SYS\exe\uc\NTAMD64
-nomask true
-modus inbox
-hostname LOCALHOST
PRINT ALL PARAMS -- END
nomask is true
SIDADMPWD
nomask is true
nomask is true
JavaEE password:
com.sap.lm.jspmadapter.standalone.adapter.CallJSPMAdapter-INFO: init me
osPWD is not null creating the OSCredentials array
J00,LOCALHOST,wceadm,*********************
com.sap.lm.jspmadapter.standalone.adapter.CallJSPMAdapter-INFO: init done
com.sap.lm.jspmadapter.standalone.adapter.CallJSPMAdapter-INFO: creat env of JSPM
com.sap.lm.jspmadapter.standalone.adapter.CallJSPMAdapter-INFO: created
com.sap.lm.jspmadapter.standalone.adapter.CallJSPMAdapter-INFO: creat env of JSPM toolinfo
com.sap.lm.jspmadapter.standalone.adapter.CallJSPMAdapter-INFO: hostname: LOCALHOST
com.sap.lm.jspmadapter.standalone.adapter.CallJSPMAdapter-INFO: sid: WCE
com.sap.lm.jspmadapter.standalone.adapter.CallJSPMAdapter-INFO: insatance: J00
com.sap.lm.jspmadapter.standalone.adapter.CallJSPMAdapter-INFO: pathtoj2ee: C:/usr/sap/WCE/J00/j2ee
com.sap.lm.jspmadapter.standalone.adapter.CallJSPMAdapter-INFO: workindir: C:/usr/sap/WCE/J00/work
com.sap.lm.jspmadapter.standalone.adapter.CallJSPMAdapter-INFO: + env, see above
com.sap.lm.jspmadapter.standalone.adapter.CallJSPMAdapter-INFO: created
java.lang.NullPointerException
     at com.sap.lm.jspmadapter.standalone.adapter.CallJSPMAdapter.checkForSTACKSXMl(CallJSPMAdapter.java:161)
     at com.sap.lm.jspmadapter.standalone.adapter.CallJSPMAdapter.applyUpate(CallJSPMAdapter.java:178)
     at com.sap.lm.jspmadapter.standalone.UpdateEXEMain.work(UpdateEXEMain.java:392)
     at com.sap.lm.jspmadapter.standalone.UpdateEXEMain.main(UpdateEXEMain.java:488)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:161)
Could not write message file
UPDATEXE ends with 1
Has anyone had this problem?
Thank you.

I figured it out after some more poking around. In NW7.1 CE, the additional required step is to map the eventID of the Chart (Business Graphics) Category also to the same attribute as Category description.

Problems with EM Database Control after applying 10.2.0.4 patchset

Hello all,
Host: Linux x86
DB: Single-instance running EM Database Control. Originally 10.2.0.1 patched to 10.2.0.4
Last night I upgraded the database from 10.2.0.1 to 10.2.0.4. All appeared to go well. I didn't get any errors in the process and when I logged in to the database control, all appeared well. It was late at night so I didn't browse around for very long, though. When I came in this morning and did some more extensive testing, upon logging in I first noticed that in the General section the database version was listed as 10.2.0.1.0. I thought that this was pretty odd since I had just been logged on to SQL*Plus and saw that the database was reporting back that it was at version 10.2.0.4.0. I refreshed the page and I saw
"java.lang.Exception: IOException in reading Response :: Connection reset"
at the top of the page. I have seen this problem before and, in the past, it has been resolved by either restarting the dbconsole or making sure that the monitoring configuration is set up correctly. The first thing that I did was issue
[host]$ emctl stop dbconsole followed by
[host]$ emctl start dbconsole
to see if that would do the trick. When I saw that it didn't, I went into the Monitoring Configuration and was surprised to see that it said "No items were found." I refreshed the page and this error appeared:
oracle.sysman.emSDK.emd.comm.CommException: IOException in reading Response :: Connection reset
I tried to follow all of the instructions in the ReadMe as closely as I could. I have been searching on the Internet and the Oracle Forums for most of the day to try to find out the cause of this error. I see that people have these errors, but the circumstances are not the same as mine. Is this a common problem? Does anyone know what I can do to resolve it?
Any help would be greatly appreciated.
Thanks!
John

Hello Satish,
Thank you for your reply. I don't know if this is normal or not but, now after the upgrade, in the ORACLE_HOME I have a directory that's been created called hostnameSID (the fully qualified host name of my computer and the SID of the database). Inside of it is a sysman directory, an emctl.pid file and an oraInst.loc file. I also still have a syman directory under the ORACLEHOME but the dbconsole appears to be running out of the hostname_SID directory. Is that normal?
I looked up the article that you referenced and looked for the targets.xml file first in the ORACLE_HOME/sysman/emd directory. I found a targets.xml file along with several other similar files, targets.xml.1, targets.xml.2, etc. The targets.xml file just had the following:
<Targets>
</Targets>
Seeing that it was blank, I then took a look at the the hostname_SID/sysman/emd folder. I saw only one targets.xml file in this location and when I opened it up it had the following:
<Targets AGENT_TOKEN="+alpha numeric string+">
<Target TYPE="oracle_emd" NAME="+hostname+:3938"/>
<Target TYPE="host" NAME="+hostname+"/>
</Targets>
The contents of that file seemed to match what the article which you cited indicated should be in the file. Since I have a single instance managed by the dbconsole and not EM Grind Control, I'm expecting the files to be a little bit different. Am I wrong in assuming that? Still, I'm not sure if I should have the hostname_SID directory beneath the ORACLE_HOME.
Any ideas?
Thanks again for your help,
John

Problem applying -ck9 patchset to 2.6.11.11

I can't get it to work..when applying a patch it sais:
patching file sound/usb/usbaudio.c
Reversed (or previously applied) patch detected! Skipping patch.
1 out of 1 hunk ignored -- saving rejects to file sound/usb/usbaudio.c.rej
patching file sound/usb/usx2y/usbusx2y.c
Reversed (or previously applied) patch detected! Skipping patch.
4 out of 4 hunks ignored -- saving rejects to file sound/usb/usx2y/usbusx2y.c.rej
==> ERROR: Build Failed. Aborting...
what am i doin wrong?

yes i know, but it is a vanilla kernel from the start, and I am applying cko5 on 2.6.11.11
(tried ck9 too samt error, but on a different place)
here is the pkgconfig i use (it is dibbles )
[root@cybertron kernel1]# cat PKGBUILD
# Contributor: dibblethewrecker <dibblethewrecker.at.jiwe.org>
pkgname=kernel26
pkgver=2.6.11.11
pkgrel=1
pkgdesc="The Linux Kernel 2.6.x.y and modules (IDE support)"
url="http://www.kernel.org"
depends=('module-init-tools')
install=kernel26.install
##### add any patch sources to this section
source=(config ftp://ftp.kernel.org/pub/linux/kernel/v2.6/linux-$pkgver.tar.bz2
http://kem.p.lodz.pl/~peter/cko/rel/patch-2.6.11-cko5.bz2 )
# Function to grab var from src
getvar() {
old=$(cat Makefile | grep "^$1")
echo $(echo ${old/"$1 ="/} | sed -e "s/[ ]*(.*)[ ]*/1/g")
return 0
build() {
cd $startdir/src/linux-$pkgver
##### Uncomment and apply any patches here
patch -Np1 -i ../patch-2.6.11-cko5 || return 1
# get rid of the 'i' in i686
carch=`echo $CARCH | sed 's|i||'`
cat ../config | sed "s|#CARCH#|$carch|g" >./.config
##### Load config - uncomment your preferred config method
#yes "" | make config
#make oldconfig || return 1
make menuconfig
#make xconfig
#make gconfig
##### NO USER CHANGES BELOW HERE #####
# save the current pkgname
old_pkgname=$pkgname
# set pkgname for build purposes - DO NOT alter!
pkgname=kernel26
# save the updated config to build with today's date
cp ./.config $startdir/config-$(date +%b%d-%Hh)
# get EXTRAVERSION from Makefile to create a unique pkgname and /usr/src directory
_kernextra=$(getvar "EXTRAVERSION")
# grab the 2.6.x.y version suffix from pkgver
_y="`echo $pkgver | cut --delim "." --fields 4`"
# remove .y version suffix from _kernextra
_kernextra="`echo $_kernextra | sed "s|.$_y||g"`"
# Read the full kernel version info from new config to use in pathnames and pkgname
. ./.config
# Kernel custom - to create a unique pkgname (see below)
_kerncust="${_kernextra}${CONFIG_LOCALVERSION}"
# Kernel release - will be the same as Makefile
_kernrel="${pkgver}${_kerncust}"
# Get the pkgver suffix for unique pkgname and /boot file suffices
_pkgversuf="`echo $pkgver | sed "s|2.6.||g" | sed "s|.||g"`"
# Set /boot file suffices from kernel release and pkgver suffix
_kernboot="${_pkgversuf}${_kerncust}"
# Set a new pkgname from kernel release and pkgver suffix
pkgname="${pkgname}${_pkgversuf}${_kerncust}"
# build!
echo
echo -n "Do you want to make clean (default YES)? (YES/NO): "
read choice
echo
echo -n "Press any key to start make or CTRL+C to quit"
read anykey
if [ "${choice}" = "NO" ] ; then
make bzImage modules || return 1
else
make clean bzImage modules || return 1
fi
mkdir -p $startdir/pkg/{lib/modules,boot}
make INSTALL_MOD_PATH=$startdir/pkg modules_install || return 1
cp System.map $startdir/pkg/boot/System.map26${_kernboot}
cp arch/i386/boot/bzImage $startdir/pkg/boot/vmlinuz26${_kernboot}
install -D -m644 Makefile
$startdir/pkg/usr/src/linux-${_kernrel}/Makefile
install -D -m644 .config
$startdir/pkg/usr/src/linux-${_kernrel}/.config
install -D -m644 .config $startdir/pkg/boot/kconfig26${_kernboot}
mkdir -p $startdir/pkg/usr/src/linux-${_kernrel}/include
mkdir -p $startdir/pkg/usr/src/linux-${_kernrel}/arch/i386/kernel
for i in acpi asm-generic asm-i386 config linux math-emu net pcmcia scsi video; do
cp -a include/$i $startdir/pkg/usr/src/linux-${_kernrel}/include/
done
# copy files necessary for later builds, like nvidia and vmware
cp -a scripts $startdir/pkg/usr/src/linux-${_kernrel}
mkdir -p $startdir/pkg/usr/src/linux-${_kernrel}/.tmp_versions
cp arch/i386/Makefile $startdir/pkg/usr/src/linux-${_kernrel}/arch/i386/
cp arch/i386/kernel/asm-offsets.s
$startdir/pkg/usr/src/linux-${_kernrel}/arch/i386/kernel/
# copy in Kconfig files
for i in `find . -name "Kconfig*"`; do
mkdir -p $startdir/pkg/usr/src/linux-${_kernrel}/`echo $i | sed 's|/Kconfig.*||'`
cp $i $startdir/pkg/usr/src/linux-${_kernrel}/$i
done
cd $startdir/pkg/usr/src/linux-${_kernrel}/include && ln -s asm-i386 asm
chown -R root.root $startdir/pkg/usr/src/linux-${_kernrel}
cd $startdir/pkg/lib/modules/${_kernrel} &&
(rm -f source build; ln -sf /usr/src/linux-${_kernrel} build)
# Correct the pkgname in our PKGBUILD - this allows correct gensync operation
# NOTE: pkgname variable must be declared with first 10 lines of PKGBUILD!
cd $startdir
sed -i "1,11 s|pkgname=$old_pkgname|pkgname=$pkgname|" ./PKGBUILD
# vim:syntax=sh

Problem applying Spry tool tips to child pages because the head tag is in a locked region

I’m new to DW and migrating a site from GoLive CS2 to DW CS5. The site uses templates created in GL CS2. I have stripped out as much GL stuff as possible.
I want to use the SPRY tooltips as a way to show captions for graphics that are on some of the pages (I used to use an Open New Browser window for that but I don’t have as much control in DW as I did in GL). But when I try to apply SPRY tooltips (or any SPRY widget for that matter) I get the following message:
“Required links could not be added to this file because the <head> tag is in a locked region. To insert this content, open the template file ‘xyz.dwt’ and either unlock the <head> tag or add this content to the template.”
I am not sure how to go about solving this problem. In the template there is an editable region for adding graphics but in the template itself there are no graphics or anything else to apply a tooltip too. Also in the child pages there may be more than one place to use a tooltip. So that suggests to me that I should not add a tooltip to the template. That brings me to the other option.
How would I go about unlocking the <head> tag in the template, without messing everything up?
Or, should I detach any page from the template when I want to add tooltips then reapply the template? I am planning to ditch the GL template anyway and apply a DW template to all the pages anyway.
Any suggestions as to what I should do?
Yours faithfully
Branko
PS I’m using Mac with Snow Leopard.

I found a solution.
I just made a transparent PNG. Put it in an inconspicuous part of the template. On the child page I could make as many copies as I needed making sure I provided id tags for each use etc.

Problem applying SAPKB64012

Hi,
I'm applying SAPKB64012 and I get an error in the import_proper phase.
The import finish with sy-subrc eq 16. I have tried several times but I always get the same error
ETW674Xstart import of "LIMUDYNPSAPLSALM2400" ...
4 ETW000 1 entry for TADIR imported (R3TRFUGRSALM ).
4 ETW000 0 entries of SMODILOG updated (FUGRSALM DYNPSAPLSALM 2400 *)
1AETW000 ===> HALT: unknown dynpro format: d021s_length() returned 0 Please contact the SAP support.
4 ETW000 ROLLBACK (6509815).
4 ETW000 End of Transport (0016).
Anybody knows how I can solve this problem
Thanks

Hi Jorge,
Seems like you need to update the kernel...
See note <a href="https://websmp110.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=REDIR&_NNUM=704566&_NLANG=E">704566</a>
Edit: you may also want to update SPAM/SAINT
Hope this help!
Juan

Problems applying patch 6168363 to 11.1.0.6.0

I'm going to be installing Oracle Beehive and one of the pre req's is the patch 6168363. I installed a vanilla Oracle 11g DB, have already successfully applied patches 6708565 and 6750049 but 6168363 fails with the following. Anyone else been able to apply this patch or had a similar problem?
[oracle@beehive 6168363]$ opatch apply
Invoking OPatch 11.1.0.6.0
Oracle Interim Patch Installer version 11.1.0.6.0
Copyright (c) 2007, Oracle Corporation. All rights reserved.
Oracle Home : /oracle/db/11.1.0/db_1
Central Inventory : /oracle/oraInventory
from : /etc/oraInst.loc
OPatch version : 11.1.0.6.0
OUI version : 11.1.0.6.0
OUI location : /oracle/db/11.1.0/db_1/oui
Log file location : /oracle/db/11.1.0/db_1/cfgtoollogs/opatch/opatch2009-04-13_11-17-05AM.log
ApplySession applying interim patch '6168363' to OH '/oracle/db/11.1.0/db_1'
Running prerequisite checks...
OPatch detected non-cluster Oracle Home from the inventory and will patch the local system only.
Please shutdown Oracle instances running out of this ORACLE_HOME on the local system.
(Oracle Home = '/oracle/db/11.1.0/db_1')
Is the local system ready for patching? y
y
User Responded with: Y
Backing up files and inventory (not for auto-rollback) for the Oracle Home
Backing up files affected by the patch '6168363' for restore. This might take a while...
Backing up files affected by the patch '6168363' for rollback. This might take a while...
Patching component oracle.rdbms, 11.1.0.6.0...
Updating archive file "/oracle/db/11.1.0/db_1/lib/libgeneric11.a" with "lib/libgeneric11.a/qcs2.o"
The following actions have failed:
Archive not applied /home/oracle/Desktop/beehive install/6168363/files/lib/libgeneric11.a/qcs2.o to /oracle/db/11.1.0/db_1/lib/libgeneric11.a... ''
Do you want to proceed? y
n
User Responded with: N
ApplySession failed: ApplySession failed in system modification phase... 'ApplySession::apply failed: Archive not applied /home/oracle/Desktop/beehive install/6168363/files/lib/libgeneric11.a/qcs2.o to /oracle/db/11.1.0/db_1/lib/libgeneric11.a... ''
OPatch will attempt to restore the system...
Restoring the Oracle Home...
Checking if OPatch needs to invoke 'make' to restore some binaries...
OPatch was able to restore your system. Look at log file and timestamp of each file to make sure your system is in the state prior to applying the patch.
The following warnings have occurred during OPatch execution:
1) OUI-67124:Archive not applied /home/oracle/Desktop/beehive install/6168363/files/lib/libgeneric11.a/qcs2.o to /oracle/db/11.1.0/db_1/lib/libgeneric11.a... ''
OPatch failed with error code 73
Edited by: Simon Thorpe on Apr 13, 2009 11:21 AM

Gah, I just figured this out. The path to my patch files contained a space! "beehive install" so i've removed the space, rerun opatch and it works. I'm amazed that modern operating systems are still struggling with "spaces"...

I am having problems applying the Photoshop 13.1 update

This thread has been created for users facing difficulties applying the Photoshop 13.1 update. Please begin by reviewing your installation logs to attempt to locate the point of failure. You can find details on how to locate and interpret your installation log at Troubleshoot with install logs | CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.
If you need assistance with reviewing your log please utilize the Adobe Support Advisor - http://www.adobe.com/support/loganalyzer/ and choose the package for support option. If you can then respond to this thread with the operating system you are using and your token number a Adobe employee can then assist with reviewing your installation logs.

I hope someone out here can help me. I'm a Creative Cloud user. I have been using the 64-bit version of Photoshop 13.0.x on my system successfully for several months now. I have Windows 7, 3rd gen (Ivy Bridge) core i7 processor, 32GB of RAM, a 1TB Hard Drive, and am using an NVIDIA GeForce 670 video card.... so my system has plenty of processing power. Several nights ago, my Adobe application manager pops up on start up (as normal whenever there's app updates to be done) and says there's an update available for Photoshop (version 13.1.2, I think.. or something close to it, anyway) and Bridge. So, as normal, I apply the updates... Everything completely successfully according to the Applicatino Manager. However, when I try to start photoshop after the update, I get this window that pops up immediately upon double-clicking the Photoshop 64-bit icon on my desktop: "Adobe Photoshop cannot run on this computer because this version of Photoshop requires Windows 7 or later." All I can do is "X" out the box to make it go away, so I did. Weird because obviously I have Windows 7 and all of my other software works great on my system, and I have Lightroom 4.3, other Adobe stuff, Serif software, ACDSee, etc... and I get no problems out of ANY of them running on my officially licensed version of Windows 7. So just for the heck of it, I uninstalled Photoshop completely and then reinstalled it using the Adobe Application Manager. It installs version 13.0, which then allows me to open and use Photoshop as normal. I proceed to "check for updates" from within the program, and it takes me to 13.0.2 I believe. I can use Photoshop as normal after that. Here's what I think is funny... I can check for updates to my heart's content after updating to 13.0.x. The program thinks there's no updates available after 13.0.x. The only way my system knows there's a later version out there is if I power down my system and restart it. Then and only then will Adobe Application Manager come up and tell me there's an update available (13.1.2) which, if I chooose to install (and I did), takes me back to the error that I mentioned earlier: "Adobe Photoshop cannot run on this computer becuse this version of Photoshop requires Windows 7 or later". Soooo with all of this said... DOES ANYONE know how the updated version of Photoshop (13.1.2) for Creative Cloud Subscribers checks to see if it's running on a Windows 7 system? For whatever reason, it doesn't think I have Windows 7 after updating to it, and I'm stuck! I know if I contact Adobe Support, they're going to want to uninstall ALL of my Adobe software of which I have alot, and then reinstall everything... and quite frankly, I think all that is a bunch of crap! It's plain and simple... Photoshop works BEFORE the update, and will not open due to this error AFTER the update, so there's some issue with the updating procedure that causes Photoshop to not recognize my Windows 7 system, and I just pray that SOMEBODY out there might be able to help me change some setting on my system that will cause Photoshop 13.1.2 to actually work!
UPDATE: I decided to check the 32-bit version of 13.1.2, and it works! So it looks like this error is limited to the 64-bit version. That just makes no sense at all to me.

I am having problems applying the Illustrator 16.2 update

This thread has been created for users facing difficulties applying the Illustrator 16.2 update. Please begin by reviewing your installation logs to attempt to locate the point of failure. You can find details on how to locate and interpret your installation log at Troubleshoot with install logs | CS5, CS5.5, CS6 -http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html.
If you need assistance with reviewing your log please utilize the Adobe Support Advisor - http://www.adobe.com/support/loganalyzer/ and choose the package for support option. If you can then respond to this thread with the operating system you are using and your token number a Adobe employee can then assist with reviewing your installation logs.

Good morning,
I have trouble installing the 16.2.0 update as well. I ran Adobe Support Advisor and here is the token returned by the application:
40-23495-024416122012
Other applications have been updated without problems. ASA tells me that there's a problem with validation of the pre-chrome licence (translated from French, I hope you see what it means). It seems to have a link with Creative Suite 5. I'm a bit surprised as I uninstalled CS5 as cleanly as possible (using the maccs5clean script).
I'm working on a 17" MacBook Pro (Early 2011) with Mac OS X 10.8.2.
Regards,
Damien
Message was edited by: Shralldam (added operating system).

Problem applying patches on Sol10

I must be doing something guffy but can't figure out what...
I am trying to apply patch on Sol 10x86 box. patchadd is failing siliently with no indication on what might be the problem. I tried on two different machines with identical results. Any ideas on what might be the problem or how to debug it.
Thanks,
/Oleg
# patchadd -g 118344-07
Patches Validation...
Loading patches installed on the system...
Done.
Loading patches requested to install.
Done.
Checking patches requested to install.
Done.
Approved patches will be installed in this order:
118344-07
Checking installed patches...
Patchadd is terminating.

I am assuming you want to only apply this patch in a specific Zone? If that is the case you would want to use -G instead of -g as the option.
"Add patch(es) to packages in the current zone only. When used in the global zone, the patch is added to packages in the global zone only and is not propagated to pack-ages in any existing or yet-to-be-created non-global zone. When used in a non-global zone, the patch is added to packages in the non-global zone only."
DP

Problem Applying SPAM KB70009

Dear All,
I have installed Solution Manager 4.0 SR1
I have upgraded the Support Package to 23 ( from 20).
Now I wish to apply BASIS Patch 70009. When I am applying the same it is asking for CRT i.e. SAPKITL416. I added the same. This CRT asks for SAPKW70009. I included that also. When I check the queue, it is also asking for SAPKIPYJ79. I included that also & started the import.
It started normally but keeps running for more than 20 Hours &
it is still running.
Pls suggest what could be the problem & how to get rid of it. Shall I stop the transaction in between or wait for more time
Thanks
Jitendra Tayal

Before you kill off the session - there are a number of ways to check in on what is occuring with your support packs. Check the process list on the server and look for a TP that is running. If this is consuming resources, then your process is still running. If it is not, then you probably have a stall somewhere. Check the system log (SM21) and the logs for the Support Packs from SPAM to see where things are. Additionally check the SLOG and ALOG in the /usr/sap/trans/logs to see what is going on. You might also want to check SM51 to see if there are any hanging processes that the TP may be waiting on.
I would also check to see if the Db has any table spaces maxed out and the server in general - it might be waiting for a table to extent or for a file system to free-up so it can write something.
Check on that and let us all know what you see and if any errors pop-up.

Problem applying 10.1.2.3 Patchset to 10.1.2 ORACLE_HOME

Similar Messages

Maybe you are looking for