Problem applying changes in CS4

Hi everyone,
I have a problem applying changes in any document. I just can apply changes if I do zoom in or zoom out.
Can you help me please?

Turn off OpenGL in the prefenrences and update your graphics driver.
Mylenium

Similar Messages

CS4 Master Collection - Problem Applying Updates

Hi
I'm running the CS4 Master Collection on Windows Vista Ultimate 32-bit, SP2.
Normally I have no problem applying updates to the various Adobe components when they become available, however for a while now I've been unable to instal an update that's reported as being available for Adobe Media Encoder 4.1.0.
If I run the "check for updates" manually I can download the update (reported as being 63.7MB) and when I attempt to instal it the installation process appears to run. It finishes after a while and the Adobe Updater reports "The Udating Process is Finished" in a single dialog box with a single button entitled "Quit" - which seems odd as "Quit" implies "finish earlier than planned", I'd have expected something more in line with "All done", something like "OK".
Anyway, when I run the check for updates again I'm told about the same update implying that it wasn't applied successfully.
I get this behaviour whether I run the update as an Administrator or not (all other updates for other products are applied without problem). I also get it regardless of whether or not I reboot the machine after trying to apply the update.
Does anyone have any suggestions on what could be causing the problem ? I couldn't find anything obvious or obviously relevant in any of the Windows event logs on the PC.
Thanks for any ideas
Steve

I am having the same problem. I found a forum that suggested this. Apparently it worked for some people, but not for me. Let me know if it does:
1. Start -> All Programs -> Accessories
2. Right-click on Command Prompt and select "Run as..."
3. Run as Administrator (even if you are logged in as Admin. You need to run in the Black Command Prompt, not the White one)
4. Run: regsvr32 JScript.DLL
5. Then run: regsvr32 vbscript.DLL
(dont forget the spaces, or it won't work)
6. Then try running the set up again
As i said, it worked for some on the forum, but not others (like me). Try it and see if works for you

Probleme with butons Apply changes & Create

Hi all,
I have an interactive report with a link column which links to a regular form so the user can modify the information when he clicks on the column link.
This form is used to add new information too.
In the form, the buton create is conditionnal (Value of Primary key is NULL )
The buton Apply changes is conditionnal too, (Value of Promary key is NOT NULL )
I added some validations to control what people write, the problem is that when people write wrong things, the Item (the primary key) that I control is not null anymore, so the buton create desappear and the buton apply changes appear. So I cannot INSERT.
Any sugggestions ?
Thank you :)

Hi,
I have an interactive report with a link column which links to a regular form so the user can modify the information when he clicks on the column link.This form is used to add new information too.
In the form, the buton create is conditionnal (Value of Primary key is NULL )
The buton Apply changes is conditionnal too, (Value of Promary key is NOT NULL )
I added some validations to control what people write, the problem is that when people write wrong things,<b> the Item (the primary key) that I control is not null anymore</b>, so the buton create desappear and the buton apply changes appear. So I cannot INSERT.>
It cannot be becoming non null on its own, chances are you have a computation or process that changes this item.
Run the Page in Debug mode and see the Debug Report. It will show you which process is changing the value to not null.
Cheers,

HT201272 Hi, i am facing problem when i try to copy an App from itunes to my iphone 3GS.... when i try to apply changes the process bar complete but apps not copied in my iphone.. plz help

Hi, i am facing problem when i try to copy an App from itunes to my iphone 3GS.... when i try to apply changes the process bar complete but apps not copied in my iphone.. plz help

Will the app run on iPhone3GS. Some of the newer apps require IOS 5 or later. This info should be displayed witht the app in itunes store

PL/SQL problem with too many lines - can not apply changes

I have a complex PL/SQL that requires checking 90 check boxes and the query works to a certain point then it just stops being able to be saved (apply changes) after a high no. of lines has been typed in. (The PL/SQL query is to check against a file, that the file has all the check boxes as yes. If there is only 1 or 2 boxes checked, then the sql created only checks those 2 fields for yes.) Is there a way to increase the coding space (or number of lines) that APEX can save/use.

This is the whole PL/SQL coding. At this point, we cannot add any more lines or it will come up with "web page cannot be found" message.
declare
q varchar2(32767); -- query
new varchar2(1):='Y'; -- first one
begin
q := 'select a."CONTR_ID", a."NAME", b."PHONE_NO", b."EMAIL_ADDR" FROM contractor a, contacts b where a.contr_id = b.contr_id and a.contr_id not in (Select unique a."CONTR_ID" from contractor a, contractor_competency b where a."CONTR_ID" = b."CONTR_ID" ';
-------------------Start ENV
if :P33_AIR_QUALITY_TESTING = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Air Quality Testing'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_ASBESTOS_REMOVAL_DEEN = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Asbestos Removal De-Energized'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_ASBESTOS_REMOVAL_ENER = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Asbestos Removal Energized'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_BUILDING_ASBESTOS_REMOVAL = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Building Asbestos Removal'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_ENVIRONMENTAL_CONSULTING = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Environmental Consulting'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_MANHOLE_ASBESTOS_REM_DEEN = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Manhole Asbestos Removal De-Energized'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_MANHOLE_ASBESTOS_REM_ENER = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Manhole Asbestos Removal Energized'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_OIL_FILTERING = 'YES' then
if new = 'Y' then q := q || ' and (';
new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Oil Filtering'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_OIL_SAMPLING = 'YES' then
if new = 'Y' then q := q || ' and (';
new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Oil Sampling'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_OIL_SPILL_CLEANUP = 'YES' then
if new = 'Y' then q := q || ' and (';
new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Oil Spill Cleanup'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_PUMPING_OUT_MANHOLES = 'YES' then
if new = 'Y' then q := q || ' and (';
new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Pumping Out Manholes'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_SIGNED_ENVIRO_DOCS = 'YES' then
if new = 'Y' then q := q || ' and (';
new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Signed Enviro Docs PRO-MS-008'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_TRANSPORTATION_OF_D_GOODS = 'YES' then
if new = 'Y' then q := q || ' and (';
new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Transportation of Dangerous Goods'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_TRANSPORTATION_OF_PCB = 'YES' then
if new = 'Y' then q := q || ' and (';
new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Transportation of PCB'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_WASTE_PICK_UP = 'YES' then
if new = 'Y' then q := q || ' and (';
new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Waste Pick-Up'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
-------------------- start OCM
if :P33_GREENFIELD_POLELINE_CONST = 'YES' then
if new = 'Y' then q := q || ' and (';
new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Greenfield Poleline Construction'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_HV_OVERHEAD_MAINTENANCE = 'YES' then
if new = 'Y' then q := q || ' and (';
new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''HV Overhead Maintenance'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_INSULATOR_WARNING = 'YES' then
if new = 'Y' then q := q || ' and (';
new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Insulator Warning'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_LV_OVERHEAD_MAINTENANCE = 'YES' then
if new = 'Y' then q := q || ' and (';
new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''LV Overhead Maintenance'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_OVERHEAD_INFRARED_SCAN = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Overhead Infrared Scanning'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_POLEHOLES_AND_ANCHORS = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || ' (instr(upper(b."JOB"),upper(''Poleholes and Anchors'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_POLELINE_INSPECTION = 'YES' then
if new = 'Y' then q := q || ' and( '; new := 'N';
else
q := q || ' or '; end if;
q := q || ' (instr(upper(b."JOB"),upper(''Poleline Inspection'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_POLELINE_WORK_TO_35KV = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || ' (instr(upper(b."JOB"),upper(''Poleline Work to 35KV'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_POLELINE_TO_44KV = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || ' (instr(upper(b."JOB"),upper(''Poleline to 44KV'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_ROCK_DRILLING = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Rock Drilling'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_TENSION_STRINGING = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || ' (instr(upper(b."JOB"),upper(''Tension Stringing'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_TREE_TRIMMING_DEEN = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Tree Trimming (De-Energized)'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_TREE_TRIMMING_ENER = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Tree Trimming (Energized)'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_WOOD_POLE_TESTING_DEEN = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Wood Pole Testing De-Energized'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_WOOD_POLE_TESTING_ENER = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Wood Pole Testing Energized'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
------------------ start UCM
if :P33_CO2_CLEANING = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''CO2 Cleaning'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_CABLE_PULLING = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Cable Pulling'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_CABLE_TESTING_DEENERGIZED = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Cable Testing De-Energized'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_CABLE_TESTING_ENERGIZED = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Cable Testing Energized'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_CONC_DUCT_MAN_DEEN = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Conc. Duct & Manhole (De-Energized)'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_CONC_DUCT_MAN_ENER = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Conc. Duct & Manhole (Energized)'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_DIR_BURIED_DUCT_DEEN = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Direct Buried (De-Energized)'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_DIR_BURIED_DUCT_ENER = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Direct Buried (Energized)'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_DIRECTIONAL_BORING_DEEN = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Directional Boring De-Energized'')) > 0) and
((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
(instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
(instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
end if;
if :P33_DIRECTIONAL_BORING_ENER = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Directional Boring Energized'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_GENERAL_EXCAVATION = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''General Excavation Around Plant'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_HV_UG_MAINTENANCE = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''HV Underground Maintenance'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_LV_UG_MAINTENANCE = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''LV Underground Maintenance'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_MANHOLE_CLEANING_DEEN = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Manhole Cleaning De-Energized'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_MANHOLE_CLEANING_ENER = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Manhole Cleaning Energized'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_MANHOLE_INSPECTION = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Manhole Inspection'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_UG_EQUIPMENT_INSPECTIONS = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''UG Equipment Inspections'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_UG_INFRA_RED_SCANNING = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''UG Infra Red Scanning'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_UG_CABLE_LOCATES = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Underground Cable Locates'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
------------------------ start SCM
if :P33_FENCING_AROUND_SUBSTATION = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Fencing Around Substation'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_FENCING_GREENFIELD = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Fencing Greenfield'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_INSPECTION_AND_TESTING = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Inspection And Testing'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_STATION_CIVIL_WORK = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Station Civil Work'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_STATION_CONST_DEENERGIZED = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Station Construction (De'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_STATION_CONST_ENERGIZED = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Station Construction (E'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_STATION_INFRARED_SCANNING = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Station Infrared Scanning'')) > 0) and
(instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
end if;
if :P33_STATIONS_ASBESTOS_REMOVAL = 'YES' then
if new = 'Y' then q := q || ' and ('; new := 'N';
else
q := q || ' or '; end if;
q := q || '(instr(upper(b."JOB"),upper(''Stations Asbestos Removal'')) > 0) and
(instr(upper(b."SET_YES_NO"),''NO'') > 0) ';
end if;
if new = 'N' then q := q || ' ) ';
end if;
q := q || ' ) ';
return q;
end;

SERVER.XML re-write problem when changing HTTP to HTTPS

Hello,
I am using SUN ONE App server and had a problem with turning SSL on in order to use HTTPS.
What I did was that in GUI I selected a http listener under my instance and checked SSL/TLS Settings. I clicked Apply Changes button and I got a message saying that there wa a problem with XML-DOM. I checked my server.xml and found that its size was 0. It seems that it stopped re-writing it when it met the problem.
An interesting thing is that when I created an additional http listener with SSL at a different port, there was no problem.
It seems that the problem occurs only when I tried to change HTTP to HTTPS.
Is there anyone who can tell me why this happens?
I will appreciate any answers or comments.
Thanks

Hi,
Is your Implementation Class is still the same (as the old one), when you changed the pre-fix.
Just double click on the Implementation class and check whether the methods are still implemented or not.
Thanks, Advay

Applying changes to report queries results in HTML 404 page not found

Hello,
When I try to change report queries (especially by using multiple queries) I frequently get HTML 404 page not found.
This happens when I click Apply Changes after I edited the query, but also quite often just when I try to confirm the changes in the query.
When I logout and then login again, after a few tries, I finally succeed.
The problem of HTML 404 page not found appears quite a few times, even when I try to delete a query or to open one for editing
Can anyone help me out here? It is really frustrating any development of reports with APEX
I'm using APEX version 3.1.2.00.02 with Oracle XE

Where do you publish your site and how do you upload the files?
What is the URL of your site?

Has Lightroom CC removed the ability to Batch apply changes to many files at once (after import) using presets?

I've just upgraded to Lightroom CC and most of the changes are very welcome - especially the performance improvements.
However I've been processing several thousand images and in Lightroom 5 when wanting to apply changes to many images at once it was as simple as selecting the group of images and then right clicking, selecting Develop Settings and then selecting one of my many Presets from a sub menu.
This sub menu seems to have disappeared in Lightroom CC.
This is a MASSIVE problem for me as I cannot work out how to apply the presets to multiple images anymore.   I note that there is a tutorial on how to do it during import - but I want to specifically be able to do it post import, during development of large groups of images for clients.
Anyone know what has happened here and how we can get access to applying presets to multiple images during development under Lightroom CC?

Yes ssprengel.
I regularly work with all the Presets visible in the left of the Develop module.   But this cannot be used to apply the preset to multiple images.   For that (in Lightroom 5) you had to select the multiple images and then right click (on any one of the images) then go down the menu to Develop Settings, then select the Preset Folder and the Preset you wished to apply to all the images selected.   This worked well for me in my workflow.   But the access to the Presets through the Develop Settings menu has been removed in Lightroom CC.   ManiacJoe's solution above works - but it's accessed from the Library module.   That's kind of counter intuitive.   I want access to apply any preset I've saved to multiple images (in many cases t's being applied to thousands of images) from within the Develop module.   it makes little sense to apply a preset one image at a time to thousands of images when developing them
The whole idea behind presets was that they could be quickly and consistently applied across multiple images.   Removing this functionality is a backward step by ADOBE in my opinion and I really want them to add it back to the Develop Module menu systems.

APEX 4 - Edit Application Properties - Apply Changes - Error

This has seemed to have started after upgrading to Apex 4. We also updated to 4.0.1, and are still having the problem. With any application, if we attempt to apply changes to the application definition it fails...
Home>Application Builder>Application 104>Shared Components>Edit Application, Defintiion tab. Make a change, then click 'Apply Changes' The browser returns a 404 error. In fact, we don't have to make a change to the values displayed. Just attempting to apply the existing values fails.
This is the error we receive in the ohs.log...
[2010-08-31T19:48:35.2479-05:00] [OHS] [ERROR:32] [OHS-9999] [mod_context.c] [host_id: hostname] [host_addr: xxx.xxx.xxx.xxx] [tid: 19] [user: username] [ecid: 004ZmWEhjJ35yW8C3jMMOz0001Lr0004y3] [rid: 0] [VirtualHost: main] MODPLSQL-00261: mod_plsql: /pls/apex/wwv_flow.accept HTTP-404 Failed to execute target procedure ORA-00604: error occurred at recursive SQL level 1\nORA-06502: PL/SQL: numeric or value error: character string buffer too small\nORA-06512: at line 10\nORA-06550: line 35, column 3:\nPLS-00306: wrong number or types of arguments in call to 'ACCEPT'\nORA-06550: line 35, column 3:\nPL/SQL: Statement ignored\n, referer: http://hostname:xxxx/pls/apex/f?p=4000:4001:3485056460649030::NO::FB_FLOW_ID:104
We're unable to find any cause for the error. Any help would be appreciated.
Thanks!

Yes, we still have the logs. No errors from the install or patch to 4.0.1. All packages, procedures, functions are valid.
And, I just found the problem. We had an 'after servererror on database' trigger enabled without the proper field checks. Disabled the trigger, problem solved.
Thanks for the help!

Applying Changes To A Template To All Documents

hi, i was wondering if there is a quick way to apply changes that are made on a template to documents made using that template?
basicaly i have over 200 html pages on my website, and i have made a few small, but important changes to the coding, and i was wanting to apply that to all the documents rather than manually do it.
EDIT: by the way im using Dreamweaver CS4
thanks in advance.

I have never done this, and I think my question is why did not the child pages update on save of the template.
But if you go to Modify | Templates | Update Pages, that might accomplish what you are looking for.
Gary

Severe audio problems in After Effects CS4 and MXF and more...

Hi!
I've been experiencing a lot of problems lately with several CS4 products.
First, and the worst, is that there seems to be some severe audio bug in After Effects when handling mxf-files. I pre-cut a project in premiere CS4, shot with a Sony EX1, and then imported the project in After Effects CS4.
In premiere everything worked fine and I had all the audio. In AE however the audio matched with the MXF-files disappeared (Yes I had the import audio box checked). All other audio worked fine from the music tracks and so on, but the MXF-files (MXF for NLE) was completely blank, the waveforms were completely flat. I checked every option there is in AE regarding audio and tried enabling and disabling XMP ID's and so on. After a lot of tweaking and testing I understood that the problem was not with any settings anywhere, the MXF-files lacked audio even if I started a new project and just imported the MXF-file.
The problem seems to be connected to when importing from Premiere. My colleague was editing a similar project on his computer in After Effects without problems, and he started out fresh in AE (didn't pre-cut in premiere). However, we tried to move my project to his computer, to see if the problem was connected with incompability with my hardware or such, and he got the same problem as me when he opened the project. Waveforms on MXF-files were completely flat. Certain confirmation that the problem was not connected with my computer appeared when he later reopened his own project, that had worked fine before, and audio was now completely gone - waveforms flat. An hour later, by chance, his audio suddenly popped back.
I have experienced this problems in two different projects in different forms (but both pre-cut in premiere). In the first, audio disappeared while previewing but was there when I ctrl-scrolled and rendered (no I hadn't muted audio in the preview panel). In the second, audio was completely gone even when rendered.
In both cases I tried saving and restarting the computer, reimporting from premiere, starting a fresh after effects project and only importing the mxf-files, changing the project settings, fps fixed to the correct instead of auto, changing output audio mapping, changing XMP, and so on in every possible way and combination I could imagine.
At my company our suspicion is that After Effects flags mfx-files imported from Premiere in some wierd way, to strengthen and ensure compatibility between the two - regarding different audio tracks, settings and effects from premiere (and this is almost what you could suspect that the XMP ID is for, but as explained with or without doesn't change a thing regarding this). We have no problem with the pure MXF support for AE, as MXF-files work just fine in After Effects if you import them directly and have not imported them through premiere earlier (but after a file has been "flagged" you seem to be sc***ed)
Anyone else experiencing this? Or am I missing something huge?
As additional notes, the dynamic link function seems extremely buggy and both premiere both sometimes complains about "dynamic link already in use and only one connection blah blah" even though only one link is used, and even though you restart the projects, programs, computer, whatever.
In furher addition Adobe Media Encoder (which also seems to be using some sort of dynamic link offspring) is super-buggy and most codec formats either doesn't start to render or just renders partially and then the program hangs. The problem have a connection with a process named pproheadless.exe eating upp all the RAM (4gbs).
(My workstation has been working smoothly for one and a half years and I have had very little problems with CS3 and "just" AE CS4. I am cautious of updates, don't have spyware and use Quicktime 7.5 as 7.5.5 is superbuggy and people seems to have problems with 7.6 and it doesn't fix the gamma issues anyway.)
Sorry if this was a long post but the problem is compl

Dude, that's what these forums are all about. Everyone in here says they dont work for Adobe, but they all act like apologists for what is clearly a disaster of a software release. My complaints aren't as specialized as yours, just very basic, and I wont go into all of them, because the list is long, and includes nearly every program in CS4.
I'm going for a refund, either from the retailer or my credit card company. Releasing software like this is dishonest.

Form apply changes results in Unable to fetch custom authentication functio

created a simple form/report application using the wizard and no modification of any kind and I can do everything except apply changes to any field on form screen -
got the following error:
Unable to fetch custom authentication function body in application - HTTP 500 Internal Server Error
any ideas??
Thanks.

I am using data base account.
more info:
the table I am working with is an existing table with large number of columns. to simplify testing I created the following table as a select from original table:
CREATE TABLE APPS.FGS_TEMP_2
TASK_ID NUMBER(15) NOT NULL,
PROJECT_ID NUMBER(15),
TASK_NUMBER VARCHAR2(25 BYTE) NOT NULL
CREATE UNIQUE INDEX APPS.FGS_TEMP_2_IDX1 ON APPS.FGS_TEMP_2
(TASK_ID)
LOGGING
ALTER TABLE APPS.FGS_TEMP_2 ADD (
CONSTRAINT FGS_TEMP_2_CON
PRIMARY KEY
(TASK_ID)
USING INDEX APPS.FGS_TEMP_2_IDX1);
and again used wizard to create a simple tabular form to view and edit - now I am able to edit and apply changes to PROJECT_ID , TASK_NUMBER but not TASK_ID ?? which I guess is a different problem.
here is the table I am trying to create the form for to edit and add - this is an existing table with few thousands rows.
CREATE TABLE HED.EDD_CPR_EMP
EDD_CPR_ID NUMBER NOT NULL,
UNIQUE_PAYROLL_ID VARCHAR2(10 BYTE) NOT NULL,
CPR_PERSON_ID NUMBER,
LEGACY_PAYROLL VARCHAR2(7 BYTE),
GEN_LEGACY_PAYROLL_FLAG VARCHAR2(1 BYTE),
LOGIN_ID VARCHAR2(7 BYTE),
BEMS_ID VARCHAR2(10 BYTE),
STD_USER_ID VARCHAR2(10 BYTE),
STD_UNIX_ID VARCHAR2(10 BYTE),
CMS_PERSON_ID NUMBER,
PERSON_TITLE VARCHAR2(10 BYTE),
FIRST_NAME VARCHAR2(30 BYTE),
MIDDLE_INITIAL VARCHAR2(1 BYTE),
LAST_NAME VARCHAR2(40 BYTE),
SUFFIX VARCHAR2(10 BYTE),
EXT_FULL_NAME VARCHAR2(80 BYTE),
KNOWN_AS VARCHAR2(30 BYTE),
ORIGINAL_HIRE_DATE DATE,
BENEFIT_DATE DATE,
LAST_HIRE_DATE DATE,
HIRE_CODE VARCHAR2(30 BYTE),
HIRE_CODE_DESC VARCHAR2(30 BYTE),
TERMINATION_DATE DATE,
TERMINATION_REASON_CODE VARCHAR2(3 BYTE),
TERMINATION_REASON_DESC VARCHAR2(30 BYTE),
LAST_DAY_WORKED DATE,
BADGE_EXPIRATION_DATE DATE,
ACCT_BUSINESS_UNIT VARCHAR2(2 BYTE),
ACCT_LOCATION VARCHAR2(2 BYTE),
ACCT_DEPARTMENT VARCHAR2(4 BYTE),
ACCT_BUSINESS_UNIT_DESC VARCHAR2(30 BYTE),
ACCT_LOCATION_DESC VARCHAR2(30 BYTE),
ACCT_DEPARTMENT_DESC VARCHAR2(30 BYTE),
HR_DEPARTMENT VARCHAR2(10 BYTE),
HR_ORG_LEVEL_CODE VARCHAR2(15 BYTE),
HR_ORG_STRUCTURE_CODE VARCHAR2(12 BYTE),
HR_ORG_FUNCTION_CODE VARCHAR2(2 BYTE),
HR_DEPARTMENT_DESC VARCHAR2(30 BYTE),
HR_ORG_LEVEL_DESC VARCHAR2(30 BYTE),
HR_ORG_STRUCTURE_DESC VARCHAR2(51 BYTE),
HR_ORG_FUNCTION_DESC VARCHAR2(30 BYTE),
HR_PARENT_DEPARTMENT VARCHAR2(10 BYTE),
US_PERSON_STATUS VARCHAR2(30 BYTE),
SHIFT VARCHAR2(1 BYTE),
SCHEDULED_WORK_WEEK_HOURS VARCHAR2(3 BYTE),
PART_TIME_CODE VARCHAR2(1 BYTE),
EXPLICIT_EMAIL_ADDRESS VARCHAR2(240 BYTE),
STABLE_EMAIL_ADDRESS VARCHAR2(240 BYTE),
URL_ADDRESS VARCHAR2(240 BYTE),
PERSON_STATUS_CODE VARCHAR2(1 BYTE),
PERSON_STATUS_DESC VARCHAR2(12 BYTE),
PERSON_TYPE_CODE VARCHAR2(1 BYTE),
PERSON_TYPE_DESC VARCHAR2(16 BYTE),
HRMS_STATUS_CODE VARCHAR2(1 BYTE),
HRMS_STATUS_DESC VARCHAR2(30 BYTE),
MANAGER_BEMS_ID VARCHAR2(10 BYTE),
MANAGER_NAME VARCHAR2(85 BYTE),
SJC_OCCUPATION_CODE VARCHAR2(2 BYTE),
SJC_JOB_FAMILY_CODE VARCHAR2(2 BYTE),
SJC_FLSA_CODE VARCHAR2(1 BYTE),
SJC_LEVEL_CODE VARCHAR2(1 BYTE),
SJC_SMC_CODE VARCHAR2(3 BYTE),
EEO1_CAT_CODE VARCHAR2(1 BYTE),
SJC_OCCUPATION_DESC VARCHAR2(25 BYTE),
SJC_JOB_FAMILY_DESC VARCHAR2(25 BYTE),
SJC_FLSA_DESC VARCHAR2(30 BYTE),
SJC_SMC_DESC VARCHAR2(25 BYTE),
EEO1_CAT_DESC VARCHAR2(25 BYTE),
HOURLY_JOB_CODE VARCHAR2(5 BYTE),
JOB_TITLE VARCHAR2(60 BYTE),
HOURLY_GRADE VARCHAR2(2 BYTE),
HOURLY_UNION_CODE VARCHAR2(20 BYTE),
HOURLY_UNION_DESC VARCHAR2(60 BYTE),
DIRECT_INDIRECT_CODE VARCHAR2(1 BYTE),
MANAGEMENT_LEVEL_CODE VARCHAR2(1 BYTE),
MANAGEMENT_LEVEL_DESC VARCHAR2(30 BYTE),
TEMPORARY_ASSIGNMENT_CODE VARCHAR2(1 BYTE),
WORK_SCHEDULE_CODE VARCHAR2(30 BYTE),
ROLE_TYPE VARCHAR2(1 BYTE),
ROLE_DESCRIPTION VARCHAR2(13 BYTE),
PERSON_CREATION_DATE DATE,
PERSON_LAST_UPDATE_DATE DATE,
LOCATION1_BUILDING_NUMBER VARCHAR2(6 BYTE),
LOCATION1_FLOOR_NUMBER VARCHAR2(6 BYTE),
LOCATION1_ROOM_NUMBER VARCHAR2(6 BYTE),
LOCATION1_STREET_ADDRESS1 VARCHAR2(60 BYTE),
LOCATION1_STREET_ADDRESS2 VARCHAR2(60 BYTE),
LOCATION1_STREET_ADDRESS3 VARCHAR2(60 BYTE),
LOCATION1_CITY VARCHAR2(30 BYTE),
LOCATION1_STATE VARCHAR2(2 BYTE),
LOCATION1_POSTAL_CODE VARCHAR2(30 BYTE),
LOCATION1_COUNTRY VARCHAR2(70 BYTE),
LOCATION1_LAST_UPDATE_DATE DATE,
LOCATION2_BUILDING_NUMBER VARCHAR2(6 BYTE),
LOCATION2_FLOOR_NUMBER VARCHAR2(6 BYTE),
LOCATION2_ROOM_NUMBER VARCHAR2(6 BYTE),
LOCATION2_STREET_ADDRESS1 VARCHAR2(60 BYTE),
LOCATION2_STREET_ADDRESS2 VARCHAR2(60 BYTE),
LOCATION2_STREET_ADDRESS3 VARCHAR2(60 BYTE),
LOCATION2_CITY VARCHAR2(30 BYTE),
LOCATION2_STATE VARCHAR2(2 BYTE),
LOCATION2_POSTAL_CODE VARCHAR2(30 BYTE),
LOCATION2_COUNTRY VARCHAR2(70 BYTE),
LOCATION2_LAST_UPDATE_DATE DATE,
MAIL1_SITE_CODE VARCHAR2(3 BYTE),
MAIL1_STATION VARCHAR2(10 BYTE),
MAIL1_LAST_UPDATE_DATE DATE,
MAIL2_SITE_CODE VARCHAR2(3 BYTE),
MAIL2_STATION VARCHAR2(10 BYTE),
MAIL2_LAST_UPDATE_DATE DATE,
WORK_PHONE1 VARCHAR2(20 BYTE),
WORK_PHONE1_LAST_UPDATE_DATE DATE,
WORK_PHONE2 VARCHAR2(20 BYTE),
WORK_PHONE2_LAST_UPDATE_DATE DATE,
CELLULAR1 VARCHAR2(20 BYTE),
CELLULAR1_LAST_UPDATE_DATE DATE,
CELLULAR2 VARCHAR2(20 BYTE),
CELLULAR2_LAST_UPDATE_DATE DATE,
PAGER1 VARCHAR2(20 BYTE),
PAGER1_PIN VARCHAR2(30 BYTE),
PAGER1_LAST_UPDATE_DATE DATE,
PAGER2 VARCHAR2(20 BYTE),
PAGER2_PIN VARCHAR2(30 BYTE),
PAGER2_LAST_UPDATE_DATE DATE,
PAGER3 VARCHAR2(20 BYTE),
PAGER3_PIN VARCHAR2(30 BYTE),
PAGER3_LAST_UPDATE_DATE DATE,
FAX VARCHAR2(20 BYTE),
FAX_LAST_UPDATE_DATE DATE,
CREATED_BY NUMBER,
CREATION_DATE DATE,
LAST_UPDATED_BY NUMBER,
LAST_UPDATE_DATE DATE,
REQUEST_ID NUMBER(15),
PROGRAM_APPLICATION_ID NUMBER(15),
PROGRAM_ID NUMBER(15),
PROGRAM_UPDATE_DATE DATE,
LAST_UPDATE_LOGIN NUMBER,
WIN2K_CREATED_BY VARCHAR2(25 BYTE),
WIN2K_UPDATED_BY VARCHAR2(25 BYTE),
L3_EMP_ID VARCHAR2(9 BYTE),
MANAGER_CPR_ID NUMBER,
SALARY_JOB_CODE VARCHAR2(10 BYTE),
JOB_FLSA VARCHAR2(10 BYTE),
BADGE_NUMBER VARCHAR2(50 BYTE)
Thanks for the help.

Getting my Master Slide to apply changes

Hi everyone. I'm very new at using DW and actually had our site built by someone else but I have been making the changes to each page. My problem is that although I can make changes to the individual pages, I cannot get the changes made to my master slide to apply to all the pages, thus leaving my sidebar incomplete. Can someone please let me know what the difference is in applying changes to an individual page vs the master? Thanks

Never trust the Masters drop menu. Choose SHow master slides from the View drop down and see if the masters show up in the navigator. If they do, click the FIRST master, and hit the New button. Rename this new one and delete the old one. Then do that for EACH master slide. That should put them All in the same "theme set" and they should show up in the drop down.
When you delete the master that's being used for a regular slide, it'll ask you what to replace it with, just choose your new master so you can delete the old ones.
It's a "glitch" in Keynote because of the allowance of multiple themes in a file. Each set of masters is tied to the theme set it came from, and won't show up when you click a slide made using a different theme set, even if it's all in the same file.
Hope that helps.

Applied changes on interfaces not processed as updated on scheduler

Dear Gurus,
Scenario
=====
Having problems in implementing a change in specific interface from a package.
How i do it:
1. Done specific changes to an interface from package A(version 001).
2. Test loading and verified loading successful on return rows.
3. Generate a new scenario for package A(version 002).
3. Hence, I have this package B that only perform scheduled loading tasks.
But when Package is executed overnite ( assuming interfaces had been updated, from the ETL diagram had applied changes of package A scenario version had been updated to the new version(002)
nothing actually perform on the interface changed. Checked on edited interfaces is changed as last saved.
Questions
======
-Would updating the agent schedule update the version changes to be executed as well? or
-Is there something else that had been missed by me as far as the 3 steps as mentioned above?
Help and pointers are deeply appreciated :)
Regards,
Terri

Dear Santos,
Sorry for the late reply..
Well let me roughly explain on my scenario in a clearer basis sorry.. :)
Current Implementation:
Package Transaction A & B and Package ETL
Package Transaction below are the functions:
-created several interfaces to perform Loading to sql db(no problems)
-Question arise ere.. say i have modified the interface in this package and applied changes.
Do i need to regenerate this package scenario?
Package ETL
-A Package created to synchronize scenario processes on a daily basis
-So in the diagram would have scenario from Scenario Transaction A connects to Scenario Transaction B where agent schedule
is applied on this Package ETL to process daily updates.
-Questions arises here again.. coz once done the changes on say Package Transaction A on interfaces assumingly done correct steps by applyin changes to interfaces. Do i need to regenerate a scenario for this Package ETL say pre change package ETL is version 001 n post change on specific interface; should i create a new scenario with version 002?
Other probs with ODI
-Regenerate Scenario crashes Dun know wut's wrong?
-Cant seem to remove previous Scenarios?
I know its preety much long winded.. but i'm such a novice in odi..
pointers and advises are truely appreciated :)
Regards,
Terri

Everytime I sync my iPhone 4 it pops up a notice saying that my iphone cannot be written to or read from. wont apply changes at the end of the sync cycle.

everytime I sync my iPhone 4 it pops up a notice saying that my iphone cannot be written to or read from. wont apply changes at the end of the sync cycle. it synced once and now nothing! help?

Did a health check on my Drive D: Issues were found and repaired. Disabled Kaspersky and tried a sync with iTunes (Success). Re-enable Kaspersky and iTunes is still working. Interesting in that I thought my iTunes only involved Drive C: What led me to problems with Drive D: were indications that there was a problem with Adobe cache for Adobe Bridge. I also purged that cache. In looking at my nightly backup there was also an indication there had been some intermittent issues of not being able to read the disk.
Bottom line... all is working again and need to continue to monitor the health of my second hard drive.

Problem applying changes in CS4

Similar Messages

Maybe you are looking for