Problem at the last step in LSMW Direct I/P Method
Hi all ,
I am trying to create the ROUTING using LSMW direct input method .
After executing the last step (Start Direct Input ) .. I am getting the Following Information as errors .
Data Transfer of Routings via Direct Input 1
Error_di_exp From To Obj Index Plnnr
E 2 2 O 0000000001
E 1 1 A 0000000001
E 2 2 O 0000000001
C\ 045
You cannot edit the task list object with activity type
C\ 045
You cannot edit the task list object with activity type
Please let me where could be the problem .
Thanks for any suggestions .
Regards,
Raj
go to CA01 and try loading one routing manually and you will understand whats the error.
discuss activity type restrictuing to be laoded with Functional consultent.
Similar Messages
-
Hi all,
i am new to LSMW, when i am transferring data from a notepad file through LSMW, in the last step i got the error that "Maintenance at plant level' and something '000000000000000' after that it close automatically,
plz forward me step by step lsmw.
Thanx in advance,Hai
Check the Step by step process for LSMW
Using Tcode MM01 -- Maintain the source fields are
1) mara-amtnr char(18)
2) mara-mbrsh char(1)
3) mara-mtart char(4)
4) makt-maktx char(40)
5) mara-meins char(3)
the flate file format is like this as follows
MAT991,C,COUP,Srinivas material01,Kg
MAT992,C,COUP,Srinivas material02,Kg
AMT993,C,COUP,Srinivas material03,Kg
MAT994,C,COUP,Srinivas material04,Kg
MAT995,C,COUP,Srinivas material05,Kg
goto Tcode LSMW
give Project Name
Subproject Name
object Name
Press Enter -
Press Execute Button
It gives 13 radio-Button Options
do the following 13 steps as follows
1) select radio-Button 1 and execute
Maintain Object Attributes
select Standard Batch/Direct Input
give Object -- 0020
Method -- 0000
save & Come Back
2) select radio-Button 2 and execute
Maintain Source Structures
select the source structure and got to click on create button
give source structure name & Description
save & Come Back
3) select radio-Button 3 and execute
Maintain Source Fields
select the source structure and click on create button
give
first field
field name matnr
Field Label material Number
Field Length 18
Field Type C
Second field
field name mbrsh
Field Label Industrial Sector
Field Length 1
Field Type C
Third field
field name mtart
Field Label material type
Field Length 4
Field Type C
fourth field
field name maktx
Field Label material description
Field Length 40
Field Type C
fifth field
field name meins
Field Label base unit of measurement
Field Length 3
Field Type C
save & come back
4) select radio-Button 4 and execute
Maintain Structure Relations
go to blue lines
select first blue line and click on create relationship button
select Second blue line and click on create relationship button
select Third blue line and click on create relationship button
save & come back
5) select radio-Button 5 and execute
Maintain Field Mapping and Conversion Rules
Select the Tcode and click on Rule button there you will select constant
and press continue button
give Transaction Code : MM01 and press Enter
after that
1) select MATNR field click on Source filed(this is the field mapping) select MATNR and press Enter
2) select MBRSH field click on Source filed(this is the field mapping) select MBRSH and press Enter
3) select MTART field click on Source filed(this is the field mapping) select MTART and press Enter
4) select MAKTX field click on Source filed(this is the field mapping) select MAKTX and press Enter
5) select MEINS field click on Source filed(this is the field mapping) select MEINS and press Enter
finally
save & come back
6) select radio-Button 6 and execute
Maintain Fixed Values, Translations, User-Defined Routines
Create FIXED VALUE Name & Description as MM01
Create Translations Name & Description as MM01
Create User-Defined Routines Name & Description as MM01
after that delete all the above three just created in the 6th step
FIXED VALUE --MM01
Translations --MM01
User-Defined Routines --MM01
come back
7) select radio-Button 7 and execute
Specify Files
select On the PC (Frontend) -- and click on Create button(f5)
give the path of the file like "c:\material_data.txt"
description : -
separators as select comma radiao- button
and press enter save & come back
8) select radio-Button 8 and execute
Assign Files
Save & come back
9) select radio-Button 9 and execute
Read Files
Execute
come back
come back
10) select radio-Button 10 and execute
Display Imported Data
Execute and press enter
come back
Come back
11) select radio-Button 11 and execute
Convert Data
Execute
come back
Come back
12) select radio-Button 12 and execute
Display Converted Data
Execute & come back
13) select radio-Button 13 and execute
Start Direct Input Program
select the Program
select continue button
go with via physical file
give the lock mode as 'E'
and execute
Regards
Sreeni -
When I try to use siri to book an appointment the last step when she says "do you want me to shedule that for you" I say yes and then she says "Sorry I can't do that, very frustrating. Do I have to turn on another setting or something?
Hello BassoonPlayer,
Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using. FaceTime will not work if you do not have the proper time zone set up for the location that you are in. This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly. By the way, you described your problem very well, which makes it easier for us to help you. Hope this solves your problem -- if not, post back and I can suggest other remedies.
Wuz -
Sync Cancelling at the Last Step after Loading iOS 5
I recently updated my iPhone 3G S to iOS5 but when the phone was restored following the update only about 2/3 of my music had synced with my phone. When I try to sync (via WiFi or cable), the iPhone gets to the last step (Step 6 of 6), begins to sync the music and then sayings cancelling sync when I haven't touched anything. When I look at my phone after attempting to sync it, I can see the songs that have not sync'd on my phone, but they are in a more transparent gray (rather than the typical black lettering) and I am unable to play them.
I have already tried restoring my phone again, the issue has persisted. I am unsure if it is relevant, but I have a 13" MacBook Pro. Thanks!Hi Roberto,
Thank you very much for your prompt response the issue seems to be very close to what is described in notes
· 1624426
· 1664394
Unfortunately We have tried both notes i.e. our Administrator verified that port is 80 and we have tried to use the ‘DNS-hostname:80’ and the problem still occasionally appears (I stress occasional and from specific end user’s PCs).
Any other ideas?
Thank you in advance.
Kind Regards
Mike -
Help required in the last step of SAP Query
Hi Experts,
I have walked through all the steps of SAP Query except for the last one.Please tell what to do in the attached screen shot of SAP Query.
Thanks and regards
Rajeev ChhabraHi Vinod
My problem is that
1.I am not getting the screen Basic List Line structure in the Tcode SQ01 can you tell me how to get that.
2. In the last step of the SQ01 transaction code Can you please tell what to do on the screen Query layout design(Please give adetailed response)
Thanks and regards
Rajeev Chhabra
Message was edited by: rajeev chhabra -
My iPad gets stucked in the last step of the sync with the computer.
When connecting the iPad to the computer the iTunes starts, reconizes my iPad and starts the sync of the iPad.
It syncs the contacts, calendars, pictures, music, etc, but in the last step (7th; "finishing Sync") it stucks and stays for ever without finishing.
I cannot load a previous backup because as soon as I connect the iPad to the computer the Sync process starts and no button is available.
I've tried to load again iTunes to start from the begining but it is still saying the same, that the Sync process is finishing and is blocked there.
Any help?
Thanks a lot.Hi Demo,
I've tried what you say but, if I'm doing it right, it doesn't work because after rebooting it goes again to syncing and stucks on the last step.
Nevertheless let me check if I'm doing it right; When you say "Before you restore from the backup, quit iTunes, ...." you mean "Before" or "After" because I don't understand how I could reboot the iPad BEFORE I restore from the Backup if it is already restoring.
Just let me write down the procedure to check that it is the right one:
1- I launch iTunes (iPad not connected) and go to Edit>Preferences>Devices, and I check the box to Prevent the iPad to syncing automatically. I click OK.
2- I quit itunes.
3- I connect the iPad to the computer.
4- I launch iTunes.
5- I go to Restore from Backup
6- Restore from Backup is finished
7- I quit iTunes
8- I disconnect the iPad from the PC
9- I reboot my PC
10- I reboot my iPad by holding down on the sleep and home buttons... iPad stars.
11- I connect the iPad to my PC.
12- I launch iTunes
13- I click on sync button.
If the procedure is right then my problem must be another one because when I do it and it starts syncing again the same problems comes back again and the syncing never stops at the last step.
Thank you anyway for your time and support.
Best regards,
Francisco -
Log-on freezes at the last step
Hi,
We use BPC 7.5 NetWeaver version SP08.
We have noticed that occasionally some of our end users are experiencing the following problem:
When they try to log on either through the Planning and Consolidation for Office Client or through the Planning and Consolidation Administration Client the log-on process freezes at the last step where the connection bar is shown i.e. after they input their credentials and press Next button.
It should be stressed that this problem appears occasionally and only on specific end usersu2019 PCs.
I would very much appreciate any help.
Thank you in advance,
MikeHi Roberto,
Thank you very much for your prompt response the issue seems to be very close to what is described in notes
· 1624426
· 1664394
Unfortunately We have tried both notes i.e. our Administrator verified that port is 80 and we have tried to use the ‘DNS-hostname:80’ and the problem still occasionally appears (I stress occasional and from specific end user’s PCs).
Any other ideas?
Thank you in advance.
Kind Regards
Mike -
My PC crashed by starting CANcard selftest in the last step for installation?
Hi,
I have tried to reinstall the CANcard and LabVIEW but my PC crashed by starting CANcard selftest which is actually the last step for installation?! Previously this CANcard worked on this PC but becuase by mistake two different LabVIEW versions have been installed, I reinstalled Win XP and now ...
I have already tried with LabVIEW7 and 6 plus CANcard driver 2.1 and 2.2 but that did not help.
Thanks for any hint.what means crashed your PC? A blue screen came up or the MAX rashed?
The problem could be caused by 6.0, because the driver was installed by the LabVIEW Installer of this version.
This can cause problems with newer drivers, like CAN 2.x.
try to uninstall all LV versions and all NI drivers.
Then check with attached programm for NI components and uninstall the rest. Then remove the CAN board from your computer and start again.
Now install LV 7 and then the driver 2.2.
Then plug in the board and now it should work, if not contact the NI Support.
Attachments:
msiBlast.exe 232 KB -
Import Wizzard Open on the last step
Hi
I'm having a problem when trying to load data.
When I select the import package it opens the wizzard incorrectly. It seems to be opening on the last step.
It does not open on the first step so that I can choose the file to import.
Can someone please help. Why isit doing this?Hi
If I try look at the package, try modify the stanadrd "import" I'm receiveing this error
Exception Text **************
System.InvalidCastException: Unable to cast object of type 'System.Xml.XmlText' to type 'System.Xml.XmlElement'.
at OSoft.Consumers.DataMgr.PackageModify50.PackageDetail.LoadDetail(String strXMLString)
at OSoft.Consumers.DataMgr.PackageModify50.PackageDetail.GetPackageDetailfromServer(String strPackageName, String strPackageFilePath, String strTeamID)
at OSoft.Consumers.DataMgr.PackageModify50.frmMain.PackageListClickEvent(String strPackageID, String strPackageFileName, String strTeamID)
at OSoft.Consumers.DataMgr.PackageModify50.frmMain.SetStartUp()
at OSoft.Consumers.DataMgr.PackageModify50.frmMain.frmMain_Load(Object sender, EventArgs e)
at System.Windows.Forms.Form.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
There seems to be something wrong. -
With iTunes 10 and iOS 5 synchronizing my iPhone (3GS) via USA and Wifi does not stop in the last step. Runs for hours. Even canceling takes forever.
iPad2 sync is fine.
Any ideas to solve it?This sounds like a problem you should take up with Apple Customer Support.
The other users like yourself here are not going to be able to help you with this problem.
Allan -
IPad / iTunes sync gets stuck at the last step
Whenever I sync my iPad and iTunes, it doesn't complete the last step and gets stuck on "Waiting for items to copy".
First it was with "Step 7 of 7: Syncing Genius data to iPad", so I deleted all Genius stuff and links to it. Since then it gets stuck with: "Step 6 of 6: Synching Artwork to iPad" and just hangs with it forever.
I am an Apple newbie, the iPad 3 is my first Apple appliance. What can I do to avoid having to exit syncing by unplugging the iPad? (NB iTunes runs on a PC with Windows 7.)
Thanks, JosephIt may be that you have a couple of problem files. I have a similar issue, where some music, that I purchased via iTunes, won't sync on to my iPod.
I'd suggest that you start my turning off as much syncing as you can in iTunes. Use iCloud to transfer your calendars, contacts etc.
Then try syncing some of your music and other media manually. If there are errors, then iTunes should flag them up by saying "Could not copy xxxx because ..."
Personally, I only sync media manually, as I don't always want iTunes to perform a full sync every time I start it up. As my iPad is set to sync wirelessly, it connects to iTunes every time I open it. -
I connected my ipod touch to the computer. When it brings up itunes and start to sync, it stalls at the last step (6). This keeps me from being able to add other songs from my library to my ipod. I'm very new at this and maybe just don't understand how it works.
Try here:
iPhone, iPad, iPod touch: Disabling digital camera notification in Windows XP -
I just purchased Adobe Acrobat XI Pro, but installation didn't work. At the last step said that it'd fund an error. Any idea? How i can contact Adobe support? I have a new Macbook Pro Yosemitte ..
Hi Francis,
Could you please let me know how have you been trying to install Acrobat?
Please ensure that you are signed in as admin and antivirus software is disabled at the time when you install.
Regards,
Anubha -
Why is my syncing (ipad2) seem to be stuck on the last step?
Why is my syncing (ipad2) seem to be stuck on the last step?
Perform a Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons... -
Adding mail ids & Removing mail ids from the last step of process chain
Hi
Can you please guied me how to do this.
Adding mail ids & Removing mail ids from the last step of process chain.
Thanks
SubbuYou can refer the following thread.
email alert for process chain
Still I would suggest to search the forum. There will be many threads and articles on this which can help you out.
Maybe you are looking for
-
Our business has updated Adobe reader to 10.1.6. I have a BUTTON that I use to send an email using Javascript but now it will not work and sometimes it freezes up. When I open the same file in Acrobat Pro X it works fine. I need it to work in Adob
-
Most efficient way to query dates
Hi! Just wondering if anyone know the quickest or best way to to date comparisons with Oracle. Ie does it take longer for oracle to convert the input date from the inputted date to a date it can use to compare. eg iuser.CreateDate <= to_date('07:Dec:
-
Flickering using Java Elements package
Im pretty new to Java and open to all suggestions for help. Basically, Im creating a simple animation in a drawing window, and using the draw and clear commands to move the image. This is causing the image to flicker and I would like to know how to s
-
Hi I have an incompletion in my sales order creation. Its a configurable material which am using and when i click the incmpletion , it says CONFIGURATION missing. I this by any chance related to some item category issue or sumthing? wHN I TRY TO COM
-
Is there a way to use a Quicktime VR movie in Keynote 09?