PROBLEM AT THE TIME OF CREATION OF VALUATION TYPE(SPLIT VALUATION)
Dear cons
I want to create a valuation type ( t-code- OMWC) in configuration client. Then I will transport to quality as well as production. but it is a matter of great regret that at the time creation of valuation type no transport request no. is genereted. without TRansport request no. how can I transport to quality as well as production. pl. help me.
nrk
Hi,
This is a client level configuration so Transport Requests are not getting generated directly. Here follow this procedure;
Go to OMWC, Click on Global types. , Click on Types > Transport in the menu bar
The sytem will prompt for a request, create the request. A new screen for selcection of Valuation cateogires & valuation types will come. You can select here & transport.
Click on Save after selection, all the selcted items will be added to the request
Similar Messages
-
Problem at the time of creation order
Dear Gurus,
facing update termination error at the time of creation/change the sales order..in development system
after some analysis, found one more error due to which above mention error is coming
report run : "RMCSUTIC" : check utility logistic info system
after running this report system giving error message "Unit O2 : No DDIC Information for source field OI0BW_ADQN - OIMSEHI1"
but when but in production server it's working fine without error message
kindly suggest some solution for the same
Regards,No DDIC Information for source field
You may have to check the following notes. Take the help of your basis team.
1) 542872
2) 557683
3) 579022
4) 645136
thanks
G. Lakshmipathi -
Alert message is needed at the time of creation ,if it reaches ,the maximu
DEAR SA EXPERTS,
Can you please me that alert message is needed at the time of creation ,if it reaches ,the maximum stock level (Stock+level)
Thanks
MohitHi,
Please refer the below links.
Alert Message
Re: Alert Message
Hope it helps you.
Thanks. -
At the time of creation of POaccount assignment is coming mandatory
Dear all;
At the time of creation of PO system showing the msg that the account assignment is mandatory for the material ,how to overcome this?
Kindly suggest whre in material master record I can change settings for account assingment ,or the control is somewhere else.
Regards;
Joydeep MukherjeeHi
In OMS2 t-code
for your material type and plant ,you have to mark value based and qunaity based updation mark
Regards
kailas Ugale -
Issue at the time of creation of transfer order for inbound delivery
Hello,
I am facing one issue at the time of creation of transfer order for inbound delivery.
If I create inbound delivery for purchase order with account assignment as 'M' (Ind. cust. w/o KD-CO), inbound delivery is not updated. Also document flow for inbounde delivery s not updated. I can create N number of transfer orders for on inbound delivery. Need help to resolve issue.
If I create inbound delivery for purchase order with account assignment other than 'M' (Ind. cust. w/o KD-CO), inbound delivery and document flow is updated.
Thanks and Regards,
NikhilHi
In OMS2 t-code
for your material type and plant ,you have to mark value based and qunaity based updation mark
Regards
kailas Ugale -
Problem at the time of Goods receipt(MM)
Dear all,
I am new in MM and I am facing a problem at the time of goods receipt against subcontracting order. In our scenario we are create a subcontracting order for one finish material and in BOM we are giving some raw material. After that we are doing transfer posting (material provide to vendor) and then receive the finish goods.But at the time of goods receipt against SCO order I am getting error that multiple parent batch for finish batch. I am unable to understand the problem. so, kindly help me.
Thanks
Rahul.I think you are receing multiple bacthes for the parent material,In this case you need to select Distribute qty option in MIGO.Here you can split the qty batchwise for parent material.If you split the qty it will allow you to receive the material.
-
Different batch no in prod order at the time of creation of prod order
Hi, we need different batch numbers in production order at the time of creation of production order. tried in system, i can able to create only one batch no at the time of creation of order. we need different batch no at the time of order creation and same no should be assigned at the time of GR from prod order. pls advise how to map this.
Dear,
Use the Exit EXIT_SAPLCOBT_001 under enhancement PPCO0001 where-in based on your requirement you can create batch for your order. You can use CALL FUNCTION 'VB_CREATE_BATCH' to create the batches as per your requirement.
Also make sure the automatic batch creation setting in Prodn Scheduling profile has been turned-off so that the batch is created only through the user-exit.
Refer this thread,
Re: Batch creation
Please try and revert back.
Regards,
R.Brahmankar -
Auto Settlement rule creation problem at the time of PM order release
In SPRO, for order type GEN, already customization available as "Madatory for Release" for order type. But still automatically settlement rule is not being created in IW31/IW32 at the time of release.
If I go to Settlement rule in GO TO option-Settlement Rule in IW32, then system is asking me two options as as With default and Without default. With default settlement, settlemement rules are coming.
But my query is, even if it is mandatory for release, why system is releasing without creating distribution rule in IW31?
Pl. let me know if any config missing.
VijayHi,
Please read note 195607 and see if it helps
regards
Waman -
Default Header text comes in PO at the time of creation
Hi Friends,
my problem is that a default Header text must come on the PO based on the user or purchasing group at the time Creation (In Transaction ME21N).
Is there any user exits or badi for it. I have already searched for them but i have not got any thing. Please help me.
Thanks for ur valuable answersyes i know that through copy control we can get default text but it is item level text instead of the header text.and other thing it does not depend on the user or purchasing group. I default header text that is populated imediately when user call ME21N. So is there any BADI or user exit for that.Please reply.
Thanks for ur reply and valuable answers
null -
TDS Problem at the time of Advance to Vendor
Hi
here is a proplem at the time of Vendors Advance payment thro f-48, aft complition of document when simulating the document ,it come Vendor-----Dr,Bank A/C--
Cr, but TDS amount is not shown(At the time of its Invoicing Every things is ok,TDS is also Deducted ) and when it massage come like that
Withholding tax amount exeeds total bank line item amounts
Massage no 7Q320
kindly look this matter
Regards
AkhilHi,
Please check the following settings.
This error occures due to bank GL that we post during down payment. Go to FS00, put that GL & in "Create/bank/interest" tab tick on relevent to cash flow.
Also check in Customizing that You have maintained the Withholding tax type for Payment Posting?
First of all, apply forst option. May be your problem will be resolved.
Pls assign points if found useful
Regards,
Jigar -
Delimited output problem at the time of writing in to text file
Hi ,
I am using matrix stayle design for my reports when i am generating reports in delimited format i am getting Delimited output problem(DR.Watson ERROR) at the time of writing in to textfile.Hi,
Try with new desformat delimiteddata which is available with Report 6i patch 11.
Thanks
Oracle Reports Team -
Basic Excise Duty problem at the time of PO genration( Dealer).
Dear All,
We are implmentation ECC 6.0 version.We are facing a problem in basic excise duty.I am genrating PO for dealer at that time excise duty should be in amount,this amount maintain in purchasing condition.When we assign tax code with 0 % BED in po.BED could not copy from purchasing condition type.
I think there was a Alternative Key (354) use in TAXINN pricing procedure,but this could not work properly.This key was proper key or any other key use in prcing procdure.
Any one suggest for right conclusion.
Regards,
Abhijit KulkarniU r ? is not clear
Hear is the process for delear case
in Delear case u will have to maintain all the details as per raw material case
only diffence is in the % of bed ecess and secess put 0 instade of 16 2 and 1
at the time of po u know that u vendor will give u material at say 100 Rs increse of excise which u dont now and 4 % vat on it
So u r po will loke like 100 basic
bed 0
ecess0
scess 0
vat 4
total 104
now whe u do GR
u come to know u have 8 bed 1.6 ecess 0.8 sccess
at the time of gr in Excise tab value
put the excise base as 100-8-1.6-0.8 = 89.6
and in bed 8
ecess 1.6
secess0.8
and in header tab of excise in miscellaneous tab tick MRP indicator
save ur part one and 2 posted
then do the miro
on item line it will show 100 as amount change it to 89.6
click on calculate tax
and ur excate payment of rs 104 will be done to vendor
this the the correct process of Delear case
Hope this is help full
Reward if usefull -
Problem at the time of ABAP Import
Hi Gurus,
I am installing SAP ERP 6.0 EHP4 IDES version on AIX 5.3 and Oracle 10.0.2.0.4 version.Here I am getting an error at the time of ABAP Import it shows testing database connection failed due to the following R3load procedure.I am sending the massege with this mail.
/usr/sap/JTB/SYS/exe/run/R3load -testconnect
exec(): 0509-036 Cannot load program /usr/sap/JTB/SYS/exe/run/R3load because of the following errors:
0509-150 Dependent module libclntsh.so could not be loaded.
0509-022 Cannot load module libclntsh.so.
0509-026 System error: A file or directory in the path name does not exist.
Please guide me to overcome this problem and provide me some solution.
Regards
NirmalHi Nirmal,
Just compare the output of the below command in your system...(Permission and ownership)
# ls -l /oracle/client/10x_64/
total 4
-rwxrwxr-x 1 <sid>adm sapsys 100 Mar 27 2006 dbclient.lst
lrwxr-x--- 1 <sid>adm sapsys 41 Oct 28 2009 instantclient -> /oracle/client/10x_64/instantclient_10201
drwxrwx--- 2 <sid>adm sapsys 1024 Mar 27 2006 instantclient_10201
Regards.
Rajesh Narkhede -
Problems with the time setting. help please
i have the time set on my ipod touch by the city i live. the time will be right for a couple days, but then it becomes an hour behind. how does that happen or how can i make that not happen?
can anyone please help me?I'm having same problem too. Has happened 3-4 times now. Can't figure out what causes the time to change to random time. At one point I thought it was caused by my leaving my calendar at a previous date or appointment, but really don't think so. I have a Verizon - iphone 5. I would think that the time would come from Verizon. Not Apple. But no one else is talking about it. Anyway, you're not alone )c: Turning it off and then back on is fine HOWEVER, last night it changed time to 2 or 3 hours EARLIER so my alarms were screwed up! I asked Siri "what time is it" and she must get her information from the iphone settings. So... she gave me the WRONG time also. Sad. 1st time it happened, it was actually Sunday 8:03 AM PST and iphone showed 11:38PM. This morning, not only was the time wrong, the date was last Tuesday, 9/26/12! Not funny when we all depend on our calendars and appointments that are set on each day. Other times, I just reset it and will wait for someone to fix the problem. I love the iphone 5 though! Nice and light (I'm a runner). It replaced a 4. Loved that one too, but new iOS6 is WAY FASTER! Love it to pieces!
-
HT201272 Problems with The Times app for iphone
I have purchased an iphone app for The Times through itunes at a cost of £9.99 for 30 days. Over 2 weeks has passed and I still don't have full access to the app. Sometimes I can log-in and it works, but every day there are times when I cannot log-in. When I try to log-in, the app says my subscription has expired. I type in my email address and password, and it doesn't accept it (a message says I should email The Times helpdesk). I contacted The Times helpdesk, and they told me that it was a problem with itunes. I would like to understand what the problem is, and why isn't the app working?
kellihammer wrote:
havent heard a thing from them
Tried any of these steps?
- Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear. (For iOS 6, holding down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
- Relaunch the App and try again.
- Restart the device. http://support.apple.com/kb/ht1430
- Reset the device. (Same article as above.)
- Reset All Settings (Settings > General > Reset > Reset All Settings)
- Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
- Restore as new device. http://support.apple.com/kb/HT4137 For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
Maybe you are looking for
-
I have a set of Citrix servers, we need to upgrade the FireFox on them to 29.0.1 When I have done this, and a user runs FireFox, now the users are being presented with a pop-up "Checking Compatibility of Add-ons" which delays the start of FireFox. I
-
Bootcamp crashed and erased part of my HDD
i have done a little bit of research and i have found nothing that has actually worked, but i was trying to install windows on my mac using boot camp, and i have done this a bunch of times before, but this time it crashed and erased my partition. i h
-
I am trying to create a simple program to input to real numbers and display the largest. This will then be used in a menu selection program that I am creating. I keep getting the error: ---------- Capture Output ---------- "C:\j2sdk1.4.2\bin\javac.ex
-
How to add infotype 0105 in PA70?
Hi Experts, I wanted to add the communication infotype in the fast entry. I have tried to add the infotype in Table 588Q and T 588R. Still I am not able to do that. Can anyone plz guide me how to do that? Thank You in advance. Manjiri
-
When trying to install flash player 11.1 it gets to 50% and tells me failed to rgister
any one got any idears iv tried on the network off the network going though diffrent instalers on the adobe site and its only this one laptop that is having the problem?