Problem at the time of Implementing Text Matching Test Case in OFT

hi,
I had add Text Matching Test Case on login of the application for the username and password. and If the Test Case fail on that screen,then it should not allow to go further in the application.
As currently at the time of Playback, it is allowing to go further and in the Result Report it display the case failed.

Actually my ques is that suppose at the time of recording i enter the username as abcd and password as 123.
When the recording is done . I Insert a Text Matching test case for both the username and password where i put the condition for the username that select text should be present as "def" . And the Test Case failed .
So i want to know that if the test case failed on Login. Whether it should be move forward at the time of playback?

Similar Messages

  • StatusBar Text Matching Test

    Hi everyone
    While playing back load script, the following Status Bar Text Matching test failed. The error message :
    StatusBar Text Matching Test "FormsLT AutoValidation: Verify StatusBar text value" failed. Failed to match "FRM-40400: Transaction complete: 1 records applied and saved.".
    Please help me to resolve this
    Thanks

    Maybe because you have more than one record applied and saved.... or a functional problem.
    You can verify the screenshot taken by OpenScript to see the real value displayed.
    Hard to tell you more without more information actually.
    You can edit the Status Bard test and paramaterize it if needed. You could even remove iit if you want to do so. However not a good idea.
    JB

  • My mac keeps highlighting different boxes all the time and a text box has appeared on the screen that says what box is highlighted if the sound is turned up when you press a key or click on a box you are informed of the action any ideas what i can do?

    Hi my Mac keeps highlighting different action boxes (on its own) all the time a strange text box has appeared on the screen that informs you if you press a key or click on a item. if the sound is turned up you are informed when a item is highlighted or a you click on a item HELP!

    Hi Thanks for your help fixed the problem
    Kind Regards
    Nannedee

  • Problem at the time of Goods receipt(MM)

    Dear all,
    I am new in MM and I am facing a problem at the time of goods receipt against subcontracting order. In our scenario we are create a subcontracting order for one finish material and in BOM we are giving some raw material. After that we are doing transfer posting (material provide to vendor) and then receive the finish goods.But at the time of goods receipt against SCO order I am getting error that multiple parent batch for finish batch. I am unable to understand the problem. so, kindly help me.
    Thanks
    Rahul.

    I think you are receing multiple bacthes for the parent material,In this case you need to select Distribute qty option in MIGO.Here you can split the qty batchwise for parent material.If you split the qty it will allow you to receive the material.

  • PP Master data to be collected from client at the time of implementation

    what is the PP Master data to be uploaded in to SAP system at the time of implementation?
    What are the PP general configuration settings for an industry with only Final Assembling (with out any in-house production)the semi finished products(from sub-contracting vendor) and some spares, in to Finished Product to be delivered to the customer in MTS ( monthly planning) scenario.

    Hi Balaji,
    The various PP realted master data which has to be collected are
    1. BOM / Master Recipe.
    2. Routing / Rate Routing.
    3. Production Version.
    4. Work Centre / Resource.
    The configuration settings would depend on the clinet requirement.
    Reward if useful.
    Narendra

  • How to do a text matching test on a button?

    I am trying to do a text matching test on a button for example 'Submit", but when I try to highlight it, it clicks the button, which is undesirable in my scenario.
    How could I do a text matching test on this button?

    I think you could do a number of things. The first is to put the Text Matching test on after the fact using the raw html. Another option is to use an object test in OpenScript where you just mouse over the element and hit f10 then choose the proper attribute to build a test case around. If all that fails then take advantage of the behavior and use the path captured for the event to build the test case after the fact and just delete the event afterward.

  • Delimited output problem at the time of writing in to text file

    Hi ,
    I am using matrix stayle design for my reports when i am generating reports in delimited format i am getting Delimited output problem(DR.Watson ERROR) at the time of writing in to textfile.

    Hi,
    Try with new desformat delimiteddata which is available with Report 6i patch 11.
    Thanks
    Oracle Reports Team

  • Is there a way to see the time of each text message, time it has been sent?

    I'm trying to prove  a point to someone. I sure you used to be able to see what time someone sent you text messages it used to appear under the message or something. why is is not there anymore?
    Is there a way to put it back in in settings?
    I really wanna know im trying to prove a point to someone

    Hi Oiee,
    Yes there is. When you're in the Messages app, swipe your finger across the screen towards the left and the time stamps will appear. When you let go, they go again.

  • TDS Problem at the time of Advance to Vendor

    Hi
    here is a proplem at the time of Vendors Advance payment thro f-48, aft complition of document when simulating the document ,it come Vendor-----Dr,Bank A/C--
    Cr, but TDS amount is not shown(At the time of its Invoicing Every things is ok,TDS is also Deducted ) and when it massage come like that
    Withholding tax amount exeeds total bank line item amounts
    Massage no 7Q320
    kindly look this matter
    Regards
    Akhil

    Hi,
    Please check the following settings.
    This error occures due to bank GL that we post during down payment. Go to FS00, put that GL & in "Create/bank/interest" tab tick on relevent to cash flow.
    Also check in Customizing that You have maintained the Withholding tax type for Payment Posting?
    First of all, apply forst option. May be your problem will be resolved.
    Pls assign points if found useful
    Regards,
    Jigar

  • Basic Excise Duty problem at the time of PO genration( Dealer).

    Dear All,
    We are implmentation ECC 6.0 version.We are facing a problem in basic excise duty.I am genrating PO for dealer at that time excise duty should be in amount,this amount maintain in purchasing  condition.When we assign tax code with 0 % BED in po.BED could not copy from purchasing condition type.
    I think there was a Alternative Key (354) use in TAXINN  pricing procedure,but this could not work properly.This key was proper key or any other key use in prcing procdure.
    Any one suggest for right conclusion.
    Regards,
    Abhijit Kulkarni

    U r ? is not clear
    Hear is the process for delear case
    in Delear case u will have to maintain all the details as per raw material case
    only diffence is in the % of bed ecess and secess put 0 instade of 16 2 and 1
    at the time of po u know that u vendor will give u material at say 100 Rs increse of excise which u dont now and 4 % vat on it
    So u r po will loke like 100 basic
    bed 0
    ecess0
    scess 0
    vat 4
    total 104
    now whe u do GR
    u come to know u have 8 bed 1.6 ecess 0.8 sccess
    at the time of gr in Excise tab value
    put the excise base as 100-8-1.6-0.8 = 89.6
    and in bed 8
    ecess 1.6
    secess0.8
    and in header tab of excise in miscellaneous tab tick MRP indicator
    save ur part one and 2 posted
    then do the miro
    on item line it will show 100 as amount change it to 89.6
    click on calculate tax
    and ur excate payment of rs 104 will be done to vendor
    this the the correct process of Delear case
    Hope this is help full
    Reward if usefull

  • Problem at the time of ABAP Import

    Hi Gurus,
    I am installing SAP ERP 6.0 EHP4 IDES version on AIX 5.3 and Oracle 10.0.2.0.4 version.Here I am getting an error at the time of ABAP Import it shows testing database connection failed due to the following R3load procedure.I am sending the massege with this mail.
    /usr/sap/JTB/SYS/exe/run/R3load -testconnect
    exec(): 0509-036 Cannot load program /usr/sap/JTB/SYS/exe/run/R3load because of the following errors:
            0509-150   Dependent module libclntsh.so could not be loaded.
            0509-022 Cannot load module libclntsh.so.
            0509-026 System error: A file or directory in the path name does not exist.
    Please guide me to overcome this problem and provide me some solution.
    Regards
    Nirmal

    Hi Nirmal,
    Just compare the output of the below command in your system...(Permission and ownership)
    # ls -l /oracle/client/10x_64/
    total 4
    -rwxrwxr-x   1 <sid>adm     sapsys         100 Mar 27  2006 dbclient.lst
    lrwxr-x---   1 <sid>adm     sapsys          41 Oct 28  2009 instantclient -> /oracle/client/10x_64/instantclient_10201
    drwxrwx---   2 <sid>adm     sapsys        1024 Mar 27  2006 instantclient_10201
    Regards.
    Rajesh Narkhede

  • Problems with the time setting. help please

    i have the time set on my ipod touch by the city i live. the time will be right for a couple days, but then it becomes an hour behind. how does that happen or how can i make that not happen?
    can anyone please help me?

    I'm having same problem too.  Has happened 3-4 times now.  Can't figure out what causes the time to change to random time. At one point I thought it was caused by my leaving my calendar at a previous date or appointment, but really don't think so.  I have a Verizon - iphone 5.  I would think that the time would come from Verizon. Not Apple.  But no one else is talking about it.  Anyway, you're not alone )c:   Turning it off and then back on is fine HOWEVER, last night it changed time to 2 or 3 hours EARLIER so my alarms were screwed up!  I asked Siri "what time is it" and she must get her information from the iphone settings. So... she gave me the WRONG time also.  Sad.  1st time it happened, it was actually Sunday 8:03 AM PST and iphone showed 11:38PM.   This morning, not only was the time wrong, the date was  last Tuesday, 9/26/12!  Not funny when we all depend on our calendars and appointments that are set on each day.   Other times, I just reset it and will wait for someone to fix the problem.  I love the iphone 5 though!  Nice and light (I'm a runner). It replaced a 4. Loved that one too, but new iOS6 is WAY FASTER!  Love it to pieces! 

  • Problems with the time limit in PCI6602

    Hi,
         I am using a counter-timer PCI-6602 to scan a sample.
        I’m using Counter0  as a pulse generator to generate a GATE signal and Counter1 as a counter, and the mode is event counting.
    J'd like to have a more precise definition about "time limit". If I used a GATE frecuency of 1KHz (1ms integration time) and a SOURCE frecuency of 10KHz with a time limit of 1sec, I measured1000 times a 10. That’s OK but that also means that I need to be 1 sec at each position!!!! And this is a lot of time!!! If I changed the time limit form 1sec to a fraction of a sec (300 ms for example) it doesn’t work. Why?
    Could anybody help me! Thanks,
    Lala

    Lala,
    What exactly do you mean by "I need to be 1 sec at each position"? Are you trying to interface with quadrature encoders? It is possible to perform a buffered period measurement which will sample the position once per second (hardware-timed). It also sounds like you are using Traditional NI-DAQ. Would it be possible to upgrade to NI-DAQmx? This API is recommended for new designs. Also, are you using LabVIEW or a text-based language. In the LabVIEW Example Finder (Help->Find Examples), search under "Hardware Input and Output->DAQmx->Counter Measurements->Position" for the Meas Angular Position-Buffered-Cont-Ext Clk.vi example. You can also use another counter to clock this buffered measurement. If this does not sound like what you are trying to accomplish, please let me know a bit more about your hardware and what you intend to do with it. I'm sure I could then recommend a better method.
    Hope this helps,
    Ryan Verret
    Product Marketing Engineer
    Signal Generators
    National Instruments

  • HT201272 Problems with The Times app for iphone

    I have purchased an iphone app for The Times through itunes at a cost of £9.99 for 30 days.  Over 2 weeks has passed and I still don't have full access to the app.  Sometimes I can log-in and it works, but every day there are times when I cannot log-in.  When I try to log-in, the app says my subscription has expired.  I type in my email address and password, and it doesn't accept it (a message says I should email The Times helpdesk).  I contacted The Times helpdesk, and they told me that it was a problem with itunes.  I would like to understand what the problem is, and why isn't the app working?

    kellihammer wrote:
    havent heard a thing from them
    Tried any of these steps?
    - Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear.  (For iOS 6, holding down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
    - Relaunch the App and try again.
    - Restart the device. http://support.apple.com/kb/ht1430
    - Reset the device. (Same article as above.)
    - Reset All Settings (Settings > General > Reset > Reset All Settings)
    - Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
    - Restore as new device. http://support.apple.com/kb/HT4137  For this step, do not re-download ANYTHING, and do not sign into your Apple ID.

  • The Time Limit Implementation SAP Business One Starter Package

    Dear Expert,
    I have read in portal SAP that SAP suggest to implement SAP Business One Starter Package with 2-10 days. Until day, i am not believe that it can do.
    Can anyone give me reference about methodology implementation SAP Business One Starter Package for implementation 2-10 days ?
    Thank's before to Expert who share me many experience.
    Regards,
    -Anggy-
    Edited by: Anggi Rinaldy on Jun 23, 2011 5:08 AM

    Hi Angy ,
    This is not a situation to get worried about how much days it will take for starter Pack .
    For a starter Package , it signifies the VANILA Implementation which is of-course possible in 2-10 days .
    Even after 1 day of installation of the product with a standard SAP Chart of Account
    And 4-5 Days of system initialization ,  you can definitely start making the Master and Start working on it.
    Even if you need the more precise Answer, you should visit the below link , Which will Give you the Clear idea about the Time Consumption requires for SAP Implementation with Full Functionality.
    BUT Always keep in mind that the Time may Vary as per your Requirement , which are different from SAP Standard Functionality.
    https://wiki.sdn.sap.com/wiki/display/B1/SAPBusinessOneAcceleratedImplementationProgram2.0
    Hope it helps
    Thanks
    Ashish Ranjan

Maybe you are looking for