Problem - backup level 0

Hi all :-D
IÂ´m trying to perfom an incremental backup level 2, but the following error occurs:
RMAN-06180 incremental backups require Enterprise Edition
To solve this problem, the action is perform a full backup or
incremental backup level 0, but there are a backup level 0.
The command LIST BACKUP SUMMARY shows the generated backup.
But the error above occurs.
Can somebody help me?
Some tip? ;-)
thanks!!!
[]Â´s
Tadeu

Hi
incremental backup fetaure is not available in standard edition.
upgrade u r oracle to enterprise edition.
check it with
select * from v$version;
Thanks and Regards
Kuljeet Pal Singh

Similar Messages

Rman backup level 0 doubt

Hi guys,
I have a doubt regarding Rman.
When I do a Level 0 backup (backup incremental level 0 database) it put in the file the empty blocks or
it saves only the used blocks in my database ?
I know the incremental backups (level 1 and 2) gets only the new blocks.
and I would like to know if rman files can be compressed during the process.
Thanks,
Felipe

Which is the version of its database?
If he will be 10g, sees the documentations.
RMAN Incremental Backups:
http://download-east.oracle.com/docs/cd/B19306_01/backup.102/b14192/bkup004.htm#BRBSC133
Binary Compression of Backup Sets:
http://download-east.oracle.com/docs/cd/B19306_01/backup.102/b14194/rcmsynta009.htm#RCMRF107

How to identify rman backup level?

Hi,
I am using rman catalog for rman backup. how to identify rman backup level from catalog.
Thanks,

By doing the obvious and consulting the online documentation at http://tahiti.oracle.com
You will notice the list backup command output has a level column and this is also present in rc_backupset and/or rc_backuppiece.
Sybrand Bakker
Senior Oracle DBA

Full Backups, Level 0 Backups, and Archived Logs

We have an active Oracle server and a standby Oracle server. We keep the standby database up to date with a cron script. The script tells the active database to do 'alter system switch logfile;'. We then rsync the archived logs to our standby server and have rman apply them.
This works everyday except Monday (of course!) and it only recently started failing on Mondays. The only change was that our Sunday backups used to be 'Full' backups but are now 'level 0' backups. Ever since that change, the first attempt to apply the archived logs to the standby server after the level 0 is taken on the active server gives us something like this:
ORA-00308: cannot open archived log
'/opt/oracle/flash_recovery_area/ORCL/archivelog/2012_04_16/o1_mf_1_60519_%u_.arc'
ORA-27037: unable to obtain file status
Of course, the file is not there and doesn't exist on the active server either. And of course, the nightly level1 backups fo not give us problems applying archived logs to the standby database the rest of the week.
The only way I know to recover from this is to apply the level 0 backup or take a new level 0 and apply it. After that, all subsequent archive logs just work. Any idea why changing from Full to Level 0 would break this? The Oracle docs insist that a Level 0 is identical to a Full except that level 1s can reference them as parents. This simply cannot be true based on what I'm seeing! I really want to keep the level 0 backups in play if possible. Level 1 cumulatives wont be useful without them.

Here are the RMAN settings:
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO DISK; # default
CONFIGURE CONTROLFILE AUTOBACKUP OFF; # default
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
CONFIGURE DEVICE TYPE DISK PARALLELISM 1 BACKUP TYPE TO BACKUPSET; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE OFF; # default
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/opt/oracle/102/dbs/snapcf_ORCL.f'; # default
I'm not sure how changing ARCHIVELOG BACKUP COPIES would help. Can you give me a little more information about how that setting comes into play in this situation?
I actually don't want an archive deletion policy here. We have this done in script three days after the needed archive logs have been applied. Is it possible that the we're deleting archivelogs too soon? Would we ever need to reach back in time to previously applied archive logs to apply new ones?
The %u does resolve, but this message isn't showing it. Here is that same log entry plus a few previous entries that show it does resolve.
ORA-00279: change 1284618956 generated at 04/13/2012 15:30:05 needed for thread
1
ORA-00289: suggestion :
/opt/oracle/flash_recovery_area/ORCL/archivelog/2012_04_16/o1_mf_1_60518_%u_.arc
ORA-00280: change 1284618956 for thread 1 is in sequence #60518
ORA-00278: log file
'/opt/oracle/flash_recovery_area/ORCL/archivelog/2012_04_13/o1_mf_1_60517_7rjzox
0l_.arc' no longer needed for this recovery
ORA-00279: change 1284618958 generated at 04/13/2012 15:30:05 needed for thread
1
ORA-00289: suggestion :
/opt/oracle/flash_recovery_area/ORCL/archivelog/2012_04_16/o1_mf_1_60519_%u_.arc
ORA-00280: change 1284618958 for thread 1 is in sequence #60519
ORA-00278: log file
'/opt/oracle/flash_recovery_area/ORCL/archivelog/2012_04_13/o1_mf_1_60518_7rjzox
0x_.arc' no longer needed for this recovery
ORA-00308: cannot open archived log
'/opt/oracle/flash_recovery_area/ORCL/archivelog/2012_04_16/o1_mf_1_60519_%u_.ar
c'
ORA-27037: unable to obtain file status
Linux-x86_64 Error: 2: No such file or directory
Additional information: 3

Problem BackUping with iCloud

Hi
I am having problem with iCloud. I turned iCloud on for backuping the
contacts, and all of a sudden I lost all of my contacts! how should I recover them now?!

Hey warren,
Thanks for the question. I understand that you are experiencing issues creating an iCloud backup of your iPhone 5s. The following resource may provide a solution:
iCloud: Troubleshooting creating an iCloud backup
http://support.apple.com/kb/ts3992
Thanks,
Matt M.

Mixing in Logic, problems with levels!

Mixing problem here: I can’t figure out how to get all my equipment/ software levels correct to get an accurate level/ sound. I use Logic Pro 7 on a Mac dual G5, my sound card is MOTU and my monitors (2) are Event 20/20 BAS. Here’s the problem I believe that something is too low and I am compensating in the somewhere else and I am getting distortion in my mix downs- but I can barely hear the song. Here are my levels/ gains:
Logic Main Mixdown track: 0.0 dB
MOTU Main out: -34 db
Event Monitors input level: 7 (max is 10)
My plug-ins and such are at the level that I load them at, I don’t mess with the gains on these too much.
Should I turn something down and turn something else up so that I can actually mix correctly? Thank you for your help!
Cappy

Hi.
I have the same problem as you. I have a dual 2.7 G5 mac using a PCI MOTU 424 with a 2408 mk3 interface. Before I updated my Logic software to 7.2, The audio seemed to work fairly deccently as far as levels. I even utilize a Presonus Digimax LT via adat pipeline into the MOTU which in the past has worked great to attenuate levels digitally and Logic and MOTU worked seemlessly BUT ever since the new intel revolution, I have noticed tons of problems with the universal version of Logic. So far I would say maybe at least 30 features doesn't work properly anymore with Logic 7.2 and 7.2.1. Seems like with each new updates, the version gets worse and worse with more problems for my G5 mac. Example, Bouncing audio. Several of my settings such as plugins, levels, crossfades getting skipped or ignored and at times even crashes. I also have other issues like cracks and pops in my audio recordings lately which really is beginning to **** me off to no end. My adat transfered audio has weird pops added to the audio when transfered digitally which it didn't do before. I also noticed several playback functions that are very unstable. Some of my song files wont even play back!! My levels are no longer accurate anymore when recording in Logic. I have to crank my presonus levels just to barely hear my guitar tracks being recorded which I didn't have to do in previous versions, which also means more hisses and noises added. Apple seriously needs to correct these issues with Logic especially when we have to pay for bad updates.
Scary thing is Logic 7.2.1 seems to run much smoother using the built in audio on my 2.0 intel macbook than my dual 2.7 G5 with my MOTU gear.

Problem with levels/meters in logic pro 7.2.2

Hopefully someone knows the answer to my problem.
I've loaded a wavefile that is peaking at 0, very compressed, limited, mastered etc..
For some reason, the audio track level meter shows that it's peaking at -3, and -3 on the master as well.
If i run the track through a bus, it knocks off another 3db at the bus and shows up on the bus and the master at -6db
This problem is becoming very frustrating. Any help would be greatly appreciated.

Can you explain to me what the pan law setting means?
My guess is that it's something to do with when 2 mono tracks are made stereo they probably add 3 db per channel and need reduction? Just a hunch
I searched the reference manual but wasn't able to find it.
g5 2ghz Mac OS X (10.4.7)

Problem Backup ( error 4027)

Dear all,
I am facing some problem in SAP Backup through DB13. Backup has failed at the end. But through SQL Server enterprise manager backup is working fine backup option also working.
I have tried few option such as insert new tape for backup, select format option etc but problem is still same.
Please could you people give me any suggestion to resolve this problem.
Please see the system and error details below.
Thanks
system configuration details:
Database: Microsoft SQL Server 2000 - 8.00.929 (Intel X86) Enterprise Edition
Error details is:
DB-Name:   SAI
Lastrun:   20080520 23:55:00
Nextrun:   20080527 23:55:00
Created:   2006-02-07 13:49:28.
Command:    sai.sap_backup_databases
             @dblist="SAI,master,msdb",@r3db="SAI",@bdev="R3D
           UMP0",@format=1,@jobname="SAP CCMS Full DB Backup
           of SAI,master,msdb [20060207134928]"
Descript: SAP CCMS JOB
Task history information ***********
For run:   20080520 23:55:00
Status:    0          (failure)   (see DB error log)
Message:   4027
Severity: 16
Duration: 0 hours, 0 minutes, 3 seconds
Last msg: Executed as user: OFFILOG-2\Administrator. DBCC ex
           ecution completed. If DBCC printed error messages,
            contact your system administrator. [SQLSTATE 0100
           0] (Message 2528) Mount tape for BACKUP DATABASE
           of database 'SAI'. [SQLSTATE 42000] (Error 4027).
            The step failed.

As for renaming your working catalog, I could have sworn there was an option for it.. however, I can't find it...
So you have a few options here. First, you could select all of your images, and then "Export as Catalog". Enter the new name and location, and wait or it to export everything. Just be sure NOT to check mark the "include negatives", or you'll duplicate all of your images!
The second way is to use the operating system to rename two files. Just browse to it's location (if you're not sure, use file->catalog settings to show you the current one and path to it). Make sure you have exited LR, then rename the file in the OS. There are two files you need to rename: catalog.lrcat, and catalog previews.lrdat.
MAKE SURE YOU SPELL THEM CORRECTLY!    I.e., don't change the extensions. Just change the names. You can delete the previews.lrdat if you wish to recreate your preview files.
When you start LR again, it will ask you if you want to create a new catalog or browse to find one. Select browse, and browse down until you select your new catalog name. And you're done.
As for backing up, when you hit catalog settings, you'll find settings to backup your catalog. There isn't a name in that section, but when the backup actually starts (for example, pick "backup next time LR exits, and then exit LR) it will give you the opertunity to choose the location you want to back up the file to.
Cheers!

Time Machine problem: backup disk ran out of space unexpectedly

Hi all,
I'm having trouble with Time Machine. Each time it tries to do a backup, it errors out.
Here is the most recent log from TM Buddy:
Starting manual backup
Backing up to: /Volumes/Time Machine Backup/Backups.backupdb
Using file event preflight for Macintosh HD
Will copy (740.5 MB) from Macintosh HD
Found 1702 files (741 MB) needing backup
2.43 GB required (including padding), 57.43 GB available
Stopping backup.
Error: (-34) SrcErr:NO Copying /Users/Alan/Pictures/iPhoto Library (original)/Masters/2013/02/25/20130225-174952/IMG_1601.MOV to /Volumes/Time Machine Backup/Backups.backupdb/Alan’s iMac/2013-07-27-024450.inProgress/FE0FAB85-8482-43AF-B2D2-CB4804D0B0E9/Macintos h HD/Users/Alan/Pictures/iPhoto Library (original)/Masters/2013/02/25/20130225-174952
Copied 111323 files (57.29 GB) from volume Macintosh HD.
Copy stage failed with error:28
Backup failed with error: 28
It usually errors out in the middle of trying to backup the very large "iPhoto Library (original)" file, so I went digging into this file back in time. About a month ago, I emptied the trash in iPhoto for the first time, and the size of the iPhoto Library file shrank from 87 GB down to just 1 GB. That seems rather extreme, and according to iPhoto, I still should have approximately 62 GB of photos remaining. The last completed backup that Time Machine was able to make had the library file at 800 MB. Even more strange, the current iPhoto Library file on my iMac is 83 GB. So I think this is the reason why TM is trying to make another complete backup of this file.
I'm guessing that if TM is able to completely backup the iPhoto Library file, the errors will go away. Does this seem like a reasonable hypothesis?
If so, then I'll need to delete files on the TM volume to make more room. At one point last year, I had tried splitting my monolithic iPhoto Library into 3 smaller libraries, and later merged them again under the current name "iPhoto Library (original)". These changes/instances of the libraries were all captured on TM. If I delete the original monolithic iPhoto Library file (named "iPhoto Library") on the TM volume, will I also lose my current iPhoto library (named "iPhoto Library (original)"? In other words, how does TM distinguish one file from another? By the file name? Or some other more permanent identifier?

The backup volume was full. That shouldn't happen, because TM is supposed to manage disk space by deleting snapshots as needed to make room for a new one, up to the last complete snapshot, which is never removed automatically. Normally, a snapshot won't be started if there isn't enough space for it.
First, I strongly suggest that you make a new backup (not necessarily with Time Machine) on another external drive. A single backup isn't enough to be safe.
One possibility is that you were writing other data to the volume during the backup. Apple recommends that no other data be stored on a backup volume.
If you've moved any files to the Trash on the backup volume, empty the Trash.
Sometimes a reboot will clear the error.
Otherwise, turn Time Machine OFF temporarily in its preference pane. Launch Disk Utility, select the backup volume, and run Repair Disk. That operation may take a few hours. If the volume is repaired successfully, or if no problems are found, try another backup.
If TM still isn't working right, boot into Recovery (command-R at startup) and repair the startup volume ("Macintosh HD," unless you gave it a different name.) Reboot as usual and try TM again.
As a last resort, put the backup drive aside and don't use it until you're sure you'll no longer need the data. Then erase it and start over. Do this only if you have at least one other backup device.

Problems BackUp New MacBook Pro to Time Capsule 1Tb

Hello
I tried to backup my new replaced MacBook Pro to the Time Capsule. This went wrong so I decided to format my time capsule (erase with zeros).
Then I setup the Time Capsule again and start the Backup. My MacBook Pro ist filled with 416Gb Data. Connected for this initial Backup is over 1000Mb/s Ethernet. Everytime my Backup stucks, sometimes after 1 Gb, 2.7. 19Gb was the largest amount I was able to backup. When I after hours on non copying manually stop the backup, it takes again hours before the Time Machine Software goes to idle. Mostly it goes so long that I decide to reboot the MacBook
I also have repaired my HD with the HArd Disk Utility Program, no result. For Secure Reason I cloned my MacBook woth superDuper to an external HD without any Problem.
Ist their a way to delete all the old backup file from my hd? My MacBook was migrated form an older MacBook Pro, maybe some TM index files are corrupted
How can I test if the harddisk is really reliable? Has the Time Capsule a builtin SMART function. Could it be usefull to take out the HD from the Time Capsule and do a low levelformat in a windows computer?
Any Tips
Gérard

Gerard Dirks wrote:
Hello
I tried to backup my new replaced MacBook Pro to the Time Capsule. This went wrong so I decided to format my time capsule (erase with zeros).
Went wrong how?
Then I setup the Time Capsule again and start the Backup. My MacBook Pro ist filled with 416Gb Data. Connected for this initial Backup is over 1000Mb/s Ethernet. Everytime my Backup stucks, sometimes after 1 Gb, 2.7. 19Gb was the largest amount I was able to backup. When I after hours on non copying manually stop the backup, it takes again hours before the Time Machine Software goes to idle. Mostly it goes so long that I decide to reboot the MacBook
See #D2 and #D6 in the Time Machine - Troubleshooting *User Tip,* also at the top of the +Time Machine+ forum.
If none of the things there help, copy and post the +TM Buddy+ messages here (per #D2), or see if any of them are in the Contents of the Troubleshooting Tip.
Ist their a way to delete all the old backup file from my hd?
Do you mean the Time Machine backups on the TC? If so, you can just delete the sparse bundle.
Could it be usefull to take out the HD from the Time Capsule and do a low levelformat in a windows computer?
That would void the warranty; and probably format it in a way that OSX and Time Machine cannot use.

Authorization problem - Privilege level

Hi,
Again I'm having some problems with AAA authorization to assign the correct privilege level to the users on my RADIUS server (FreeRadius).
I am currently updating all routers to do this authorization and I'm having problems because one of them has version 12.0(30)S2, which does not use the same commands.
This is the AAA configuration that I have working on the other routers:
aaa new-model
aaa group server radius RADIUSSERVERS
aaa authentication login AAA group RADIUSSERVERS local enable none
aaa authentication login CONSOLE local
aaa authentication ppp default group radius local
aaa authorization exec AAA group RADIUSSERVERS local none
aaa authorization network default group radius local
aaa authorization network AAA group RADIUSSERVERS local none
aaa accounting exec AAA start-stop group RADIUSSERVERS
aaa accounting network default start-stop group radius
aaa accounting network AAA start-stop group RADIUSSERVERS
aaa session-id common
line vty 0 4
session-timeout 5000
access-class 99 in
exec-timeout 5000 0
password 7 x
authorization exec AAA
login authentication AAA
transport input telnet
line vty 5 15
session-timeout 5000
access-class 99 in
exec-timeout 5000 0
password 7 x
authorization exec AAA
login authentication AAA
transport input telnet
This is the one that does not work (version IOS 12.0(30)S2):
aaa new-model
aaa authentication fail-message ^C
aaa authentication password-prompt Passcode:
aaa authentication username-prompt UserID:
aaa authentication login AAA radius local enable none
aaa authentication login CONSOLE local
aaa authorization exec AAA radius local none
aaa authorization network default radius local
aaa authorization network AAA radius local none
radius-server host x.x.x.x auth-port 8812 acct-port 8813
radius-server retransmit 2
radius-server key 7 X
line vty 0 4
session-timeout 5
access-class 99 in
exec-timeout 5 0
password 7 x
authorization exec AAA
login authentication AAA
line vty 5 15
session-timeout 5
access-class 99 in
exec-timeout 5 0
password 7 x
authorization exec AAA
login authentication AAA
The radius server is configured to be the same, although I use the group command with the new version and "radius-server" with the older version.
Can anyone tell me what I'm doing wrong?
Thank you,
Paulo

Thanks. Looking at the debugs solved the problem.
I was so convinced that I had set the right privilege level on the server that I didn't even check it. It worked on the other routers because their commands were set to lower privilege levels.
That was the problem.
Thanks for everything and sorry for bugging you with such a simple problem.

Problem: backup is too large for the backup volume

I am seeing the following message. Any hints as to what is going on?
The backup is too large for the backup volume. The backup requires 711.1 MB but only 20.2 GB are available.
To select a larger volume, or make the backup smaller by excluding files, open System Preferences and choose Time Machine.

I fixed it. I think.
Recipe:
1. Logged in an an administrator (usually my work accounts are Standard)
2. Ran Onyx utility (http://www.apple.com/downloads/macosx/systemdiskutilities/onyx.html)
3. Noted that under "Scripts", the weekly and monthly scripts had not been run since before the problem began
4. Ran weekly and monthly scripts
5. Restarted Time Machine
6. TM now correctly deleted my old backups, freeing about 30GB. It now correctly reports that my oldest backup is Feb 3 2008, previously it said Dec 27 2007.
7. TM ran perfectly
So it appears that there was some bad juju in the old caches cleared by the scripts. If this pops up again, I will report it here.

Incremental Backup Levels

Hello Everybody.
I want to know the description of all 0-4 levels of incremental backups. Anybody please tell me in details.
Thanks and Regards

ora-boy
Questions like this have version specific answers. Almost all questions have.
It is useless and silly to post any question without any version information.
Here's why
In 8i and 9i: incremental levels are between 0 and 3. There is nothing to explain,
1>0, 2>1, 3>2. That's all.
In 10g there is only 0 and 1. The higher levels have been removed.
Please stop asking questions without version information, assuming people keep track of your version (which we don't) or will summarize it for all available versions (which we won't )
Sybrand Bakker
Senior Oracle DBA

HP Pavilion dv7-1130us IDT HD sound card problem: recording levels too high

I have been trying to get the IDT HD sound card in my HP Pavilion dv7-1130us laptop to allow me to switch from "microphone" to "Line In" input signal. I cannot find an option anywhere in the laptop do this. There is not a separate Line-In jack on the laptop. The mike jack is it.
The reason I'm trying to change the input setting is that I am using Audacity/Lame (the Win 7-compatible Beta version) to convert old cassettes to MP3. My laptop came with Vista but I upgraded to Windows 7 Professional (64-bit) earlier this year.
The problem is that recording levels are way too high using the mike input and so the recording comes out harsh and distorted. I have tried all possible recording level adjustments on the tape deck (no option), IDT sound card control panel, Windows device manager, etc.
From what I am reading on the online Audacity forums, using a mike input will cause the recording levels to be too high, and the setting has to be changed to "Line In" and not "microphone." Is there not a way to do that with this laptop and sound card?
The HP Support Assistant tells me that the driver for my sound card is up-to-date.
Thanks in advance for any help or suggestions. I've been trying to find a solution on my own for a couple days with no luck.

Hi Amanda,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp52501-53000/sp52658.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, right click the speaker icon in the Taskbar and select Playback Devices. Left click 'Speakers and Headphones' once to highlight it and then click the Set Default button - check if you now have audio.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Problema backup con WD Smartware 2.0.1

Ciao a tutti. Da qualche giorno a questa parte ho avuto un problema con WD Smartware e il mio My Passport da 1 TB..Cioè quando inserisco l'hard disk non parte il backup automatico. allora provo ad eseguire il programma e anche manualmente non si avvia (a dire il vero si avvia perchè la barra in alto dice "copia file" ma dopo due giorni che l'ho lasciato così non ha caricato niente.. ). Cosa dovrei fare? Mi sapreste aiutare?

Salve, anche io ho lo stesso problema. Da qualche giorno ho acquistato un my passport ultra da 1.0 tb. Su windows 7 il backup funziona solo al primo avvio poi quando riprovo a riavviarlo in un secondo momento non funziona più. Nella schermata in alto nella scheda backup dice 'copia dei file in corso' ma in realtà non copia nulla. Addirittura si windows 8.1 la scheda backup non si apre proprio. La versione di SmartWare è la 2.4.12.

Problem - backup level 0

Similar Messages

Maybe you are looking for