Problem bei Premiere Elements 12 - Freigeben und Veröffentlichen

Wer kann helfen?
Bin Neu-Einsteiger!
Beim Veröffentlichen/Freigeben eines bearbeiteten Clips sei es bei
Revel
iPhone hohe Auflösung (bis zur niedrigsten Auflösung)
Ausgabe auf PC
erscheint nach kurzer Zeit die Meldung beim Rendern:
Ausgabe nicht möglich, da unbekannter Fehler
An der Hardware kann es nicht liegen, da ein anderes Projekt einwandfrei veröffentlicht wurde.
Beim Vergleich der beiden Projekte in der Expertenansicht ist mir folgendes aufgefallen.
Beim "fehlerhaften" Projekt ist im Schnittfenster ganz oben ein grüner und organgefarbener kleiner Balken oberhalb der jeweiligen Sequenzen sichtbar. Beim funktionierenden Projekt ist alles grün.
Was läuft schief???
Bin um jede Anregung dankbar.

@mylenium
naja, wenn dir noch nicht mal die Beduetung der Farbbalken klar ist, wäre es wohl am sinnvollsten, erst nochmal die Hilfe zum Thema Timeline rendern/ berechnen und Projekt Cache zu konsultieren...
Dazu steht nichts in der Bedienungsanleitung!

Similar Messages

DVD-Menü-Problem bei Premiere 2.0

Hallo,
ich habe drei kleine Probleme bei Programm Premiere Elements 2.0!
Vielleicht kann mir ja jmd. weiterhelfen.
Ich habe einen Film fertig geschnitten, schon als mpeg2-Format exportiert und wiederum auf eine Videospur in dem besagten Schnittprogramm eingefügt (damit die ganze Sache auf jedenfall gesichert ist).
Nun habe ich im DVD-Bereich erfolgreich auch schon ein DVD-Menü erstellt. Sprich ich habe zuvor Szenenmarken und eine Stop-Marke am Ende des Films gesetzt.
Nun habe ich aber einen kleine Vortrailer noch erzeugt. Dieser soll wie bei Handeslüblichen DVDs ganz am Anfang beim Einlegen der DVD in einen DVD-Player abgespielt werden, bevor dann überhaupt zum ersten Mal das Haupt-DVD-Menü erscheint. Außerdem soll dieser Kurz-Trailer, wenn möglich auch immer wieder zuvor erscheinen, wenn man auf das Hauptmenü wieder zurückgreifen möchte! Letzteres ist mir allerdings nicht so wichtig.
Nun zu meinem zweiten Problem, das da wäre:
Ohne diesen Vorspann-Trailer habe ich schon versucht den Film mit dem bisher stehenden DVD-Menü auf eine DVD zu brennen. Er rechnet dann auch länger, bis er mir vermeldet, es wäre auf Laufwerk D nicht genügend Speicherplatz zum Zwischenspeichern vorhanden. Nun sind dort allerdings 24 GB Speicher frei und daher verstehe ich diese Aussage nicht. Es handelt sich um einen Film von 30min Länge.
Wer weiß bei dem Problem gut Bescheid?
Zu dritten Problemfall:
Ich habe in einem Teil meines Film (Außenaufnahme mit Sprache) Nebengeräusche. Ein konstanter Ton ist dies, der während des Sprechens des Protagonisten zu hören ist. Nicht sehr laut, allerdings auch nicht überhörbar. Nun habe ich schon in die Tonspur den Effekt DeNoiser eingebaut, allerdings komme ich damit nicht so richtig voran. Bei Premiere Elements 2.0 kann man ja die Tonspur visuell gut betrachten und ich sehe innerhalb der Tonspur auch zwei Rubriken. Die eine obenliegend wird die Stimme des Protagonisten sein, darunter liegt mit leichtem Abstand die Visualisierung dieses Nebengeräusches, so nehme ich an. Ideal wäre, wenn ich die untere Schicht einfach wegschneiden könnte. In dem Sinne also eigentlich mal kein vertikalen Schnitt, sondern in der Tonspur horizontal.
Dann müßte eigentlich das konstante Störgeräusch verschwunden sein.
Liege ich da richtig und wie gehe ich vor oder muß ich diese Fehlerbehebung von einer ganz anderen Seite aufziehen?
Fragen über Fragen und ich hoffe jmd. weiß mir zu helfen, das wäre sehr schön und ich hoffe sogar, es ist ein Leichtes für Euch mir darauf zu antwort. Denn was für manchen ein großes Problem, ist für andere nur Peanuts.
Liebe Grüße und Vielen Dank, wenn Ihr mir helft!
Martin

Bill,
As things seem to be a bit wonky (highly technical editing term that loosely translates to things going pear-shaped ), I would do a Save_As and increment the Project's name, just to be safe.
For the cranky Project, this PrPro-Wiki FAQ Entry might be useful.
Good luck,
Hunt

Installationsproblem bei Premiere Elements 11

Warum bekomme ich beim Setup jedesmal die Meldung: Fehler 2753, The file "wmencodinghelper.exe" is not marked for installation,
und das Setup bricht ab.
Betriebsystem windows 8.1

Am 13.02.2014 19:33, schrieb kglad:
>
Re: Installationsproblem bei Premiere Elements 11
created by kglad <http://forums.adobe.com/people/kglad> in
/Downloading, Installing, Setting Up/ - View the full discussion
<http://forums.adobe.com/message/6117944#6117944

Problem with premiere elements 4.0

i am having
problem
with premiere elements 4.0. it keeps on crashing and when i put pictures on the timeline it comes up black. when i try to preview it either it shows black or sometimes the picture but i cant see it to delete if i wanted to. also it gave me a message something like that adbe is running low on memory and i should be caution

This is aimed at Premiere Pro, but may help
Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1

Audio volume problem in Premiere elements 12

How can I reduce or increase volume in the soundtrack???

Sorry for my English but I hope you understandthe following.
I have for the moment no time to go through your comments and ideas, but I certainly will do the coming days.
For good order I’ll explain my problem more in detail: (working with Window’s 7)
When I use Tools>smartmix, I change Audio 1 in “forground”, Comments in “foreground”, Soundtrack in “Background”, Audio 2 and 3 in “Background”. So far so good!.
Next step is: edit>preferences>audio>smartmixer, and the only thing I can change is “milliseconds (i.e. 10)”, “mix pause (i.e. 5 sec)”, and “reduce background in % (i.e. 90%)”. So far so good again!
The volume sound of the audio track is indeed reduced when there is a conversation in the clip, but not enough, so still too loud, certainly when the conversation stops, the volume sound is far too loud.
What do I want:
a) Remain the original volume from the conversations etc. in the clip, so don’t change anything in here.
b) Reduce the volume to the level I like!
I realise, this looks an easy and simple question, but I can’t fide out hou too lower only the volume in a soudtrack!
Waiting your reply and many thanks in advance
Regards
P.Gans
Van: A.T. Romano [email protected]
Verzonden: vrijdag 10 januari 2014 4:05
Aan: Maauwtje22
Onderwerp: Audio volume problem in Premiere elements 12
Re: Audio volume problem in Premiere elements 12
created by A.T. Romano <http://forums.adobe.com/people/A.T.+Romano> in Premiere Elements - View the full discussion <http://forums.adobe.com/message/5999094#5999094

Ich habe Premiere Elements deinstalliert und möchte es weitergeben .Muß ich dazu meine Produktregistrierung löschen? Wie geht das?

Ich habe Premiere Elements deinstalliert und möchte es weitergeben .Muß ich dazu meine Produktregistrierung loschen?Wie geht das?

m.j.cancer
What version of Premiere Elements and computer operating system is involved?
What do you mean by "pass it on".
Pending further information, I can only generalize.
1. Depending on the version, you would go into an opened project, go to Help Menu/Deactivate or for version 12 Help Menu/Sign Out in order to deactivate the program from you computer. You do this before you uninstall the program. After the deactivation, you close out of the opened program, and uninstall Premiere Elements using the usual Control Panel route. If you want to go after any leftovers from the uninstall, you might consider a run through of the ccleaner program (regular cleaner and registry cleaning parts).
Now by "pass it on" you mean sell or give the program to another, then you need to look into certain considerations since the agreement with Adobe is a licensing one. In such as case, please read the Adobe document "Transfer an Adobe product license"
Transfer an Adobe product license
Please review and consider.
Thank you.
ATR
Add On...Remember this is not Adobe, rather a user to user forum. The matter that you present is handled through Adobe.

Betr. Ausstecher Wekzeug Optionen bei PS Elements 13 und Windows 8 Die Optionen "Weiche Kante" und Ausstechen werden nicht angezeigt. Wie kann ich diese Optionen wieder sichtbar machen?

Betr. Ausstecher Wekzeug Optionen bei PS Elements 13 und Windows 8
Die Optionen "Weiche Kante" und Ausstechen werden nicht angezeigt.
Wie kann ich diese Optionen wieder sichtbar machen?

Probleme Installation Premiere Elements und PS Elements 12 unter Windows 7

Habe Riesenprobleme mit Installation Premiere Elements und PS Elements 12, gemeinsam genutzte Technologien werden nicht installier, habe alle Hinweise aus den Foren bereits probiert (6 Stunden Arbeit). Wer weiß wirklich Rat?

Naja, aber wirklich tiefgehende Informationen zu deinem System haste ja auch nicht gegeben, also kann da auch keiner mehr dazu sagen. Wie gerade in einem anderen Thread geschrieben, könnte es eben sein, das das System einfach nicht kompatibel ist, aber das können wir nicht wissen.
Mylenium

Problem nach update bei premiere elements 12

nach dem sich das programm geupdatet hat kann ich mein laufendes projekt nichtmehr starten.
es heisst in der fehlermeldung das dies nicht mit der aktuellen version kompatibel ist.
wie kann ich es dennoch wieder starten da ich seit 3 monaten an diesem video projekt sitze.
vielen dank für die hilfe

alexamderm
Thanks for the reply.
First are you sure that you did not move, delete, or rename any files and folders that were imported into the project before you
saved closed it. In other words, all you did was to update 12 to 12.1 using an opened project's Help Menu/Update? If that is correct...
1. Close the program.
2. Go
Local Disk C
Users
Owner
AppData
Roaming
Adobe
Premiere Elements
12.0
and in the 12.0 Folder is the Adobe Premiere Elements Prefs file which you delete. If that does not work, then you delete the whole
12.0 Folder in which the Adobe Premiere Elements Prefs file exists. Be sure to be working with Folder Options Show Hidden Files, Folders,
and Drives active so that you can see the complete path mentioned.
More later.
ATR

Probleme mit Premiere Elements 10

Hallo Forum,
nach langem für und wieder bin ich vor einigen Wochen von IMovie auf APE 10 umgestiegen. Das anfängliche "Ahhhh" und "Ohhhh" hat sich bei mir mitlerweile in ein "Ver***** Schei*****" gewandelt. Ich stoße immer wieder auf gravierende Probleme:
- Wenn ich in die Spuren zoome und die Länge eines Clips ändern will springt das Schnittfenster an das Ende des Projektes.
- Der Audiomixer übernimmt die Einstellungen für die Spuren nicht und springt immer wieder auf die Standardeinstellungen sobal das Projekt abgespielt wird.
- Das Verkürzen von Clips führt dazu, dass alle Projektspuren verschoben werden.
- Die Optionen "Ja" und "Nein" sind bei mir grundsätzlich mit "Ja" und "Ohne" betitelt.
Ein entspanntes Arbeiten ist das auf jeden Fall nicht! In einigen Wochen kann ich die Liste bestimmt noch um einige Punkte erweitern
Hat jemand die gleichen Schwierigkeiten oder möglicherweise eine Lösung für mich?
System: Mac Book Pro 13" mid. 2011, Adobe PE 10 Boxed (nicht die Appstore Version!)
Würde mich freuen wenn jemand eine Lösung hätte, mir steht ein größeres Videoprojekt auf der Arbeit bevor.....
Gruß!
Zapi

Êtes-vous en utilisant l'onglet Partager?
Quelles sont les spécifications de votre métrage source?
Qu'est-ce projet Preset fait que vous choisissez au Nouveau projet?
Merci, et bonne chance,
Hunt

Problems with Premiere Elements 12

I've been using Adobe's "Elements" applications since Vs 3.0. Each release seems to include undocumented features that cause problems, and don't get fixed until a next major release, for which we are charged a tidy sum.
"Premiere 12" and its associated "Organizer" are no exceptions. Background:
1. FINALLY am running a new PC considering I'm using AVCHD "m2ts" file formats generated by Sony HD Camcorder, for which previous PC and versions of Adobe Premiere Elements (8, 10, etc.) were fairly sluggish with their performance. New PC: Windows 8.1, 32GB RAM, >7TB HDD space, Intel i7 CPU, GIGABYTE MB, NVIDIA GeForec GTX 770 Video Adapter...plenty of computing power!
2. Installed Photoshop/Premiere Elements/Organizer on C: drive, default locations.
3. Experienced following problems, for which several have been kind enough to offer suggestions for repair, but none so far have worked.
     a. When adding "text" captions, after a few have been created the control panel for text loses contact with the "Style" and "Effects" modules, making these capabilities non-functional.
     b. When creating menus for discs, the DVD menu navigation operates correctly, but the Blu-ray menus do not. The "Stop" markers, while functional for DVDs, are not functional for Blu-ray discs. When a video is played that encounters a "stop" marker with a DVD build, the end action is properly realized with the main menu then making a reappearance, allowing one to make the next choice. When a video is played through to encounter a "stop" marker with a Blu-ray build, the video does NOT return to the main menu, but rather continues playing into the 2nd movie (or beyond) until it reaches the absolute end of content on the disc...at which time we are then returned to the main menu. Finally reading the manual, it indicates that this is a problem! FIX!?
     c. "Organizer," which works with both Premiere and Photoshop Elements, is highly unstable when working with AVCHD files, while it performs "normally" with still images (photos, etc.). I have over 4,000 AVCHD (m2ts) video clips that I was attempting to bring into Organizer. My first attempt was to let Organizer "see" all of the files and to "bring them into" its catalog. However, after a short period of time, with less than 100 or so video clips identified and thumbnailed, Organizer either stops working and hangs, or crashes totally. I found that to get these 4,000 files into Organizer I had to manually pick around 50 or so files at a time, which Organizer seems able to begin its "first stage" of identifying, creates "placeholders" in the Organizer's screen, then crashes or hangs. At that point, I must restart Organizer, which will then continue on to successfully build thumbnails. This process was repeated until all 4,000+ files were recognized and ID'd. Regarding this issue: I just updated my "Nero" to "Nero 2014 Platinum," which comes with its own "Organizer" or "Media Manager." it is VERY similar in nature to Adobe's "Organizer," with one major difference...IT WORKS! Nero's manager imported not only the 4,000+ AVCHD files into its catalog, but rumaged around my entire system finding photos and video files I'd long since forgotten about! I've not yet used the new Nero video editing/production tools, but won't be surprized if I find that all works equally as well.
Not having any "fixes" for these problems, I find I am forced to use other applications (Vegas 12, Pinnacle 17, or perhaps now "Nero" as well) to get on with our production work. Note: I had been using Adobe Premiere 6.0, then CS-4, for a while but with changes in OSs found that these products as well evolved with issues of their own. Not going to spend the big bucks to purchase more expensive problems that don't otherwise get addressed without spending even more $$$ for the next major updates!
Help?
George

Bill;
YES! It WAS Sonic that I’d suspicioned was at the core of these issues in the past. I’d run into problems a few years ago with various versions of “Creator,” “Roxio,” etc. as well as another similar products, and found “Sonic” to be the common denominator with all similar problems. I had NO idea that Adobe had also chosen to implement a 3rd party’s product (Sonic) as part of their offerings! Well, that says a lot!
Also did NOT know that Sonic had been sold off to Rovi! Searching the internet…shows this was a big deal back in 2010! Hadn’t been following these things! Looks like Rovi is out to capture the world…would be a nefarious event indeed if they fail to maintain what Sonic has sold to various entities which have incorporated their modules into the various products we continue to own and purchase today!
I don’t know which cave or rock that Rovi’s been living under, or which marketing outfit they’d signed up with that provided the evaluation that Rovi appears to be reacting to, but we at least are still engaged in sending off videos around the world via DVD/Blu-ray media (and on rare occasions, VHS tape!). Their assessment that delivery of video by physical disc is dead is either wishful thinking or badly mistaken in my opinion. Try, worst case, supplying a video to a person living on an island off of Queensland, Australia, for example, who has NO internet connectivity!
I know that streaming is a big deal (Netflix, etc.), and that the new buzzword “Cloud” has taken over a lot of the computing world’s philosophy of late…but neither of these “new” ideas are implemented to the extent they would like to believe…and are the domain of mostly “new” users living in areas where these technologies are available. They are cutting off a vast number of video watchers who employ neither of these technologies nor have access to them, who, believe it or not, are still using VHS video tape, DVDs, and/or Blu-ray media to watch videos! The relatively small percentage of individuals who use (can afford, or have access to) either streaming or the cloud does not justify not taking care of business and dropping support for all these products that implement their procured technologies.
I for one have great/fast access to the Internet (50Mbps +), but really am not of the mindset that I trust uploading/saving critical data to the “Cloud,” and do not do so…even though Microsoft’s latest “Window 8.1” and several other procured applications provide plenty of opportunity to do so! I think the latest stories re Hacking proves this point…and I have experienced the loss of stored data (websites) over the years via professional website hosting facilities to the point where I know I don’t yet trust the “cloud” to be the repository of my data either…a service which cannot guarantee either the presence or security of data!
I do also enjoy Netflix’s streaming technology…even though there are occasions whereby a movie is interrupted to buffer additional video data. Sometimes much more frequently than I would appreciate! So…streaming is also not the end all of video watching either! OK…I have rented a DVD or two in the past from Netflix which had been scratched or badly handled, which also provided aggravation as well!
So long as the industry continues to sell the technology of the day to us consumers who invest in their products, and so long as industry will do what they do best…to continue refining and upgrading capabilities, they must also continue to provide the “cross over” technologies, the continued support that would span at least a few generations of video products that will allow us to continue viewing videos obtained at an earlier time. Right now we see VHS tape is already at its end of life usefulness…and yet there remains support for converting such media. We also see the vast majority of products purporting to support DVD and Blu-ray builds…the latest of video products…and yet, the underpinnings of these applications appears to be diminishing already…
Thanks so much for the feedback and update and the opportunity to vent! Do we know how Adobe is/will be reacting to these events? Will they spend the bucks to come up with their own code to replace that which is not supported any longer by 3rd parties?
George

Problem with Premiere Elements 11 uploading mp4 files

I tried to upload a video footage for editing. The video was taken using a GoPro camera and the output is mP4. The footage playback on Premiere Elements 11 was choppy and stalled often. I asked someone else with the same program and he experienced the same issue- so much so that he quit using Adobe's software and switched to Mac/iMovie. Any thought on why or how to fix the problem? I emailed Adobe support a couple of times for the problems encountered in both Premiere and Photoshop but have gotten no response from them. Thanks.

Gumbie10
Appreciated the follow up. Would like to offer some considerations....
1. If you are looking at choppy video, then you must be on the Premiere Elements 11 Expert Timeline or Quick Filmstrip in order to see the choppy video in the Edit Mode monitor. Consequently, to see the video you had to import it.
a. How did you import it? Add Media/Files and Folders to get the files into Project Assets from where you dragged the files to the Expert Timeline. (In the Quick Filmstrip route, there is no Project Assets intermediary. It is Add Media/Files and Folder/with direct to one of the scenes in the Filmstrip).
b. Once you had the files on the Expert Timeline or Quick Filmstrip, did you render the files there by hitting the Render button or by hitting the Enter key of the computer main keyboard?
2. Premiere Elements 11 automatically takes over setting up the project preset for a new project. The project preset should match the properties of the source media. Sometimes it does the set OK; sometimes, not. Check to see what the program has set if you did not set the project preset yourself manually. (Edit Menu/Project Settings/General and readings for Editing Mode, Timebase, and Frame Size.)
3. If you are using the GoPro Hero 3 Black at the 1080p set, then the video codec (compression) is AVCHD (MPEG4 AVC/.H264). The question becomes at what frame rate...30, 60, or other progressive frames per second. From what you wrote, apparently what you have has a .mp4 file extension (that is what is called the container, the format that wraps the video and audio compressions).
4. Then we come to the matter of your photos. What are the pixel dimensions that you are trying to use for this Premiere Elements project? Have you gotten to importing the photos or is it only the videos that you have tried to import into a Premiere Elements 11 project?
Please review the above.
But, I am also concerned about
Meantime, for still images, I did my editing on PS Element 11 and used Live Movie Maker to put together the video. It works for me. I had trouble with the output (to burn DVD/Cd and to upload to PS showcase) in the PS Element as well.
Thanks again for the input. I'll give an update later.
Do you want two separate projects, one for video and one for stills or is all that a workaround for overall issues.?
Please do not hesitate to ask for clarification on anything that I have written. I will rewrite if necessary so that we are in sync.
The answers are in the details.
More later.
ATR

Problems with Premiere Elements 8 after updating to Nvidia driver 195.81 or later?

Hello PRE8 users,
If you have an Nvidia-based graphics chipset, and you've updated to Nvidia driver version 195.81 or later and you're still experiencing frequent crashes and freezes in Premiere Elements 8, then we'd like to hear from you in this thread. As mentioned in the announcement at the top of this forum, we believe most of these issues are caused by a problem with an Nvidia driver that was released after PRE8 was developed, and that the issues should be resolved by updating to Nvidia driver version 195.81 or later. Notes from the announcement I mentioned above are copied below for your reference.
Best regards,
Chad
For Nvidia users, there is a driver update that will fix both of the following issues:
Premiere Elements 8 does not restart after closing on Windows
Frequent and inexplicable crashes with Premiere Elements 8
To resolve these issues, you should update your GPU (graphics card) driver to version 195.81 or higher, by following the steps below.
1.      Identify which GPU driver you have by right clicking on the Desktop > Properties > Settings and in the Display field it will be displayed.
2.      Go to http://www.nvidia.com/Download/index.aspx?lang=en-us and download driver for your GPU card. Its size varies from 80 to 120MB depending upon the GPU card model.
3.      After the download is complete, run the driver install Installation. This should take less than 2 minutes.
There are no known issues that the latest driver update will cause.
This is an announcement. There is a separate discussion topic located here.
***If the update steps shown above do not upgrade your system to version 195.81 or higher, then you may need to download the driver directly. Use the link below only if the steps above do not update your driver to 195.81 or higher. The download page for Vista and Windows 7 is located here:
http://www.nvidia.com/object/win7_winvista_32bit_195.81_beta.html
http://www.nvidia.com/object/win7_winvista_64bit_195.81_beta.html

Processor
AMD Athlon(tm) II X4 620 Processor
7.1
4.9
Determined by lowest subscore
Memory (RAM)
4.00 GB
7.1
Graphics
NVIDIA GeForce 9500 GT
4.9
Gaming graphics
2431 MB Total available graphics memory
6.3
Primary hard disk
231GB Free (466GB Total)
5.9
Up here I copied and posted my PC's spec's. Since upgrading to the new driver, my problems increased. I seem to experience more crashes than before. Happens randomly and I can not see a pattern.   (I have noticed dragging clips from one area to another on the time line is no-no)
JPR

Problems with Premiere Elements 9.0.1 on Mac OS X Lion

Hi,
I recently upgraded to Mac OS X Lion and I am having several stability issues with Premiere Elements 9.0.1 now. None of these issues occurred on Snow Leopard. I experienced these issues on a machine that was upgraded from Snow Leopard to Lion after Premier Elements 9.0.1 was installed and I also had problems with a Premiere Elements installation on a clean install of OS X Lion.
I noticed the following issues:
1) System hangs when trying to save a project. The "save" window stays open at 100% completion.
2) Nothing happens when dragging footage to sceneline. The clips do show up on the timeline, though
3) System crashed when trying to upload a video to YouTube
Could you please get these issues fixed and provide a patch for Premiere Elements?
Thanks.
Ralph

This is not Adobe technical support, this is a user to user forum with the space provided by Adobe
To talk to adobe go to https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
And, be prepared to provide a LOT more detail about your computer and project

Problems with Premiere Elements 10, please help!

Hello,
I am in the process of editing some videos for the charity I work for using Premiere Elements 10 but I am encountering some problems...
Firstly, Elements keeps crashing for no reason... It happened time after time when I was trying to edit a title, to get around it I had to delete the title and then insert a new one and it was fine. However, it has started again. I am just trying to select multple scenes and a title to group them and elements just crashes citing a runtime error. Anyone know how I can solve this problem? An update may be needed.
Normally when moving around clips on the timeline you get a strong verticle black line across the timeline to indicate when the clip in next to the beginning/end of another clip/title/item on the timeline so it is easy to line things up. This feature has disappeared from one of my projects which is very annoying as I keep accidently chopping bits of clips off. Why has it disappeared? How do I get it back?
These current issues are making it difficult for me to work and are very frustratig, any help would be gratefully received!
Many thanks,
John H.

SCM Video Editor wrote:
laptop with a 1.86 GHz processor, 2.74GB RAM.
It is AVCHD video
Ouch! To work with AVCHD footage both your processor and RAM are way underpowered. Most would say you need a Quad-Core or I7 processor and a minimum 4GB RAM (more if you are using W7 64-bit).
As it is your project is most likely having repeatedly swap memory to and from your hard disk - which is bad.
I'm guessing that this laptop is a few tears old and probably has only one disk drive with very little free space. To find out:
Press the Windows key
Type Info
From the list of programs that will be shown select System Information
Open Components> Storage> Drives
Your disk information will show in the right-hand pane.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Problem bei Premiere Elements 12 - Freigeben und Veröffentlichen

Similar Messages

Maybe you are looking for