Problem bei transition

Hi.
We have a problem with transition effects
When some transition is started , the screen begins to
rapaint and in this
moment I change to another application through ALT-TAB the
transition loops
unendlessly and the look of director-Application window is
very "unclean"
(buggy repaint). When I change again to Director app, its
window repaints
correctly and everything works fine. How can I avoid this
situation?
Thanx in advance
Jorg

Have you disabled the animate in background projector option?
If you have to run in background some lingo script, perhaps
calling a
function in the free version of buddyAPI xtra can determine
when the
projector is in background, jumping to a non transition frame
to avoid
the artifact.
You can determine of the current frame has a transition ( the
frameTransition?) perhaps jumping to the following frame if
at a
transition.

Similar Messages

  • Simple problem with transitions

    Hi everyone
    I am having a small bit of a problem with transitions....
    When I drag a clip from the viewer over the canvas to get the menu bar pop up, and select insert with transition ( cross dissolve ) it puts in a transition but its very short and too fast and when i select it and try to make adjustments it doesn't seem to let me make any changes to the cross dissolve.
    I wander what i am doing wrong?
    Many thanks Tim

    Hi
    Just as David Harbsmeier indicates. Handles
    Transitions are handled differently in iMovie resp FinalCut.
    • iMovie - material that builds the transition is taken from the videoclips = the total length remains same
    • FinalCut (as pro- works) . You have to set of a piece of material in each end of the video clips.
    This is called In- resp. Out-points. The remaining parts are called Handles
    Transitions here are using material from these = Total lenght of movie increase
    per transition.
    I find books/DVDs by Tom Wolsky - Very valubale - Enjoyed them very much.
    • Final Cut Express 4
    • Final Cut Pro 6 - DVD course (now probably version 7)
    Yours Bengt W

  • Problem bei Texterstellung mit der Schriftgrösse.

    Ich habe folgendes Problem bei der Texterstellung:
    Die grösse der Buchstaben sind bei der Texterstellung so winzig, dass man sie kaum lesen kann.
    Selbst wenn ich den Schriftgrad auf 72Pt einstelle ist die Schriftgrösse so klein das man die Buchstaben kaum erkennen kann.
    Was läuft da schief? Wie kann ich das ändern, dass die Buchstaben grösser sind?

    Welches Programm wird denn verwendet? Ohne diese Information ist eine Hilfe schlecht möglich.

  • Probleme bei gleichzeitiger Verwendung von mehreren RS232-Schnittstellen.

    Hallo, ich habe ein Problem bei der Verwendung von RS232 Schnittstellen zum Auslesen von Werten externer Laborwaagen. Die Waagen senden mit 1200 baud, 8 bits data, no parity, 2 stop bits. Ich habe mir in LabView7Express ein Programm geschrieben, in welchem ich mit Hilfe des I/O Assistenten VI die Waagenwerte auslesen kann. Zum Zeitpunkt der Programmierung war die Waage am COM 2 Port angeschlossen (diesen habe ich über die WindowsXP Systemsteuerung ebenfalls auf 1200 baud, 8 bits data, no parity, 2 stop bits konfiguriert). Das Programm hat auch perfekt funktioniert. Jetzt wollte ich eine zweite Waage (gleicher Typ wie Waage 1) an den COM 1 Port anschließen. Das Programm habe ich dahingehend veränd
    ert, dass ich den Teil für Waage 1 einfach kopiert und im I/O Assistenten den Port COM 1 ausgewählt habe. Waage 1 (am Port COM 2) wird jetzt weiterhin normal ausgelesen, für die Waage 2 (am Port COM 1) bekomme ich immer eine Fehlermeldung: bfff003e.
    Ich habe jetzt versucht das Programm neu zu schreiben (nur die Waage 2 am Port COM 1), bekomme jetzt aber im I/O Assistenten einen I/O Error. Beide COM Ports funktionieren (mit dem Windows HyperTerminal überprüft).
    Ich weiß da echt nicht mehr weiter und bitte um Lösungsvorschläge, lg axelwo

    Dieser Basic I/O fehler ist schwer einzuengen. Meistens sind das Probleme mit dem Deskriptor der Resource. Sind COM1 und COM2 unter MAX sichtbar? Kann man eine VISA session dazu öffnen und einfache befehle testen, wie z. b. "*idn?"? Ansonsten kann es auch was mit der Konfiguration des POrts zu tun haben. Hierzu benutzt man am Besten die Eigenschaftsknoten die mit VISA mitgeliefert werden. Anbei ein Kleines Beispiel, denke das sollte funktionieren:
    Attachments:
    visatest.vi ‏77 KB

  • Datenfehler bei der installation crc prüfungguten morgen, ich habe ein  problem bei der installation von photoshop elements 12 von cd, nach eingabe des key wird die installation abgebrochen mit der fehlermeldung "datenfehler crc prüfung", erbitte um unter

    guten morgen, ich habe ein  problem bei der installation von photoshop elements 12 von cd, nach eingabe des key wird die installation abgebrochen mit der fehlermeldung "datenfehler crc prüfung", erbitte um unterstützung. gruß wolfgang

    Download Photoshop Elements products | 12, 11, 10
    Mylenium

  • Problem bei CS5

    Hallo Zusammen, habe folgendes Problem bei CS5, Programm läuft seid ca. 2 Jahren bis heute stabil, ab jetzt zeit es an das es nicht mehr Funktioniert und " Das Programm wird aufgrund eines Problems nicht richtig ausgefüht. Das Programm wird geschlossen und Sie werden benachrichtigt, wenn eine Lösung verfügbar ist" Auch bei einer Neuinsallation bleibt der Fehler bestehen. Bitte um Hilfe.

    Hallo Zusammen, habe folgendes Problem bei CS5, Programm läuft seid ca. 2 Jahren bis heute stabil, ab jetzt zeit es an das es nicht mehr Funktioniert und " Das Programm wird aufgrund eines Problems nicht richtig ausgefüht. Das Programm wird geschlossen und Sie werden benachrichtigt, wenn eine Lösung verfügbar ist" Auch bei einer Neuinsallation bleibt der Fehler bestehen. Bitte um Hilfe.

  • DVD-Menü-Problem bei Premiere 2.0

    Hallo,
    ich habe drei kleine Probleme bei Programm Premiere Elements 2.0!
    Vielleicht kann mir ja jmd. weiterhelfen.
    Ich habe einen Film fertig geschnitten, schon als mpeg2-Format exportiert und wiederum auf eine Videospur in dem besagten Schnittprogramm eingefügt (damit die ganze Sache auf jedenfall gesichert ist).
    Nun habe ich im DVD-Bereich erfolgreich auch schon ein DVD-Menü erstellt. Sprich ich habe zuvor Szenenmarken und eine Stop-Marke am Ende des Films gesetzt.
    Nun habe ich aber einen kleine Vortrailer noch erzeugt. Dieser soll wie bei Handeslüblichen DVDs ganz am Anfang beim Einlegen der DVD in einen DVD-Player abgespielt werden, bevor dann überhaupt zum ersten Mal das Haupt-DVD-Menü erscheint. Außerdem soll dieser Kurz-Trailer, wenn möglich auch immer wieder zuvor erscheinen, wenn man auf das Hauptmenü wieder zurückgreifen möchte! Letzteres ist mir allerdings nicht so wichtig.
    Nun zu meinem zweiten Problem, das da wäre:
    Ohne diesen Vorspann-Trailer habe ich schon versucht den Film mit dem bisher stehenden DVD-Menü auf eine DVD zu brennen. Er rechnet dann auch länger, bis er mir vermeldet, es wäre auf Laufwerk D nicht genügend Speicherplatz zum Zwischenspeichern vorhanden. Nun sind dort allerdings 24 GB Speicher frei und daher verstehe ich diese Aussage nicht. Es handelt sich um einen Film von 30min Länge.
    Wer weiß bei dem Problem gut Bescheid?
    Zu dritten Problemfall:
    Ich habe in einem Teil meines Film (Außenaufnahme mit Sprache) Nebengeräusche. Ein konstanter Ton ist dies, der während des Sprechens des Protagonisten zu hören ist. Nicht sehr laut, allerdings auch nicht überhörbar. Nun habe ich schon in die Tonspur den Effekt DeNoiser eingebaut, allerdings komme ich damit nicht so richtig voran. Bei Premiere Elements 2.0 kann man ja die Tonspur visuell gut betrachten und ich sehe innerhalb der Tonspur auch zwei Rubriken. Die eine obenliegend wird die Stimme des Protagonisten sein, darunter liegt mit leichtem Abstand die Visualisierung dieses Nebengeräusches, so nehme ich an. Ideal wäre, wenn ich die untere Schicht einfach wegschneiden könnte. In dem Sinne also eigentlich mal kein vertikalen Schnitt, sondern in der Tonspur horizontal.
    Dann müßte eigentlich das konstante Störgeräusch verschwunden sein.
    Liege ich da richtig und wie gehe ich vor oder muß ich diese Fehlerbehebung von einer ganz anderen Seite aufziehen?
    Fragen über Fragen und ich hoffe jmd. weiß mir zu helfen, das wäre sehr schön und ich hoffe sogar, es ist ein Leichtes für Euch mir darauf zu antwort. Denn was für manchen ein großes Problem, ist für andere nur Peanuts.
    Liebe Grüße und Vielen Dank, wenn Ihr mir helft!
    Martin

    Bill,
    As things seem to be a bit wonky (highly technical editing term that loosely translates to things going pear-shaped ), I would do a Save_As and increment the Project's name, just to be safe.
    For the cranky Project, this PrPro-Wiki FAQ Entry might be useful.
    Good luck,
    Hunt

  • Hallo ich habe ein problem bei meinem I pod touch 4G geht der ton nicht mehr richtig denn immer wenn ich ihn etwas lauter stellen möchte geht die anzeige der lautstärke wie aus geistes hand auf null und bleibt auch die ganze zeit sichtbar was soll ich tun

    Hallo ich habe ein problem bei meinem I pod touch 4G geht der ton nicht mehr richtig denn immer wenn ich ihn etwas lauter stellen möchte geht die anzeige der lautstärke wie aus geistes hand auf null und bleibt auch die ganze zeit sichtbar was soll ich tun oder wie teuer wäre eine reparatur ich wüde mich um eine antwort freuen lg
    JS

    Google translate:
    Hello I have a problem with my I pod touch 4G is not the right tone for whenever I want to make it louder is the display of the volume of such spiritual hand to zero and remains visible all the time what should I do or how would be an expensive repair I am looking forward to an answer wüde lg
    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store or contact an Apple Authorized Service Provider. Seems you have a hardware problem.
    Apple Retail Store - Genius Bar
    If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  

  • Unexplained problem with transitions

    Friends,
    I'm having an odd problem with transitions. When I insert a transition, the transition cuts off the last few second of the audio of a clip and repeats the previous few seconds of audio. The video in transitioned appropriately.
    This problem appears in all three of the transitions I've tried.
    Has anyone heard of this? How can I remedy?
    Thanks!
    Steve

    I think I've fixed the problem, albeit in a cumbersome way. Some of the transitiosn were between video and inserted still images. I might have adjusted the still image duration after inserting the transition. Then again, maybe not. Deleting the transition and surrounding clips/images and reinserting seemed to solve the problem. The program seemed to copy over a portion of the "left" clip that was equal in length to the portion of the clip included in the transition, but which occurred just before the transition began, and included that portion in the transition. I don't know if that's clear, but the lesson that I've learned is that transitions should be the second-to-last edit made, just before adding music. They are very termperamental.
    Thanks for your suggestions.
    Steve

  • Probleme bei Synchronisation von Kontakten zwischen iPhone und Exchange

    Hallo,
    Ich nutze ein iPhone 4s mit iOS 5.1.1 und habe folgende 2 Probleme bei der Synchronisation von Kontakten zwischen dem iPhone und Exchange:
    1. Das eingetragene Geburtsdatum wird falsch auf das iPhone übertragen und zwar +1 Tag, d.h. hat jemand am 1.1. Geburtstag, steht im Kontakt auf dem iPhone 2.1.
    2. Es werden immer nur 129 Kontakte auf das iPhone synchronisiert. Es sind aber mehr vorhanden (148).
    Ursprünglich trat nur der erste Fehler auf, welcher mich veranlaßte die Kontakt bzw. Mail Sybchronisation abzuschalten und anschließend wieder einzuschalten, mit dem Ergenis das zusätzlich nun nur noch 129 Kontakte übertragen werden.
    Ich nutze einen Hotmail Account, auf welchem die Kontakte alle (148) korrekt vorhanden sind.
    Hat jemand eine Idee, wie sich das Problem lösen lässt?

    Ja, ich habe genau die gleich Konfiguration.
    Das liegt daran, dass das iPhone eine eigene Geburtstagsliste aus den Kontakten führt. Somit ergibt sich zu den Terminen, die Outlook beim Eintragen eines Geburtstages automatisch im Kalender anlegt, ein zweiter Termin.
    Wenn Du den Kalender öffnest, dann links oben auf Kalender tippst, dann siehst Du zwei Einträge:
    - 1&1 Kalender ( das ist der Kalender des Exchange bei 1&1)
    - Geburtstage (das ist die iPhone Geburtstagsliste
    Leider lässt sich das nicht vermeiden (soweit ich weiß ... ). Ich habe sogar schon mit dem Gedanken gespielt, die Geburtstagseinträge aus dem Outlook-Kalender zu löschen ...  ist aber nciht komfortabel, weil man das dann bei jedem neuen Kontakt immer wieder tun muss ...
    Folglich habe' ich mich damit abgefunden. Den Geburtstagskalender des iPhone finde ich sogar gut, weil ich mit diesem und den Standard-Erinnerungen (auf 09:00 morgens) endlich am Tag des Geburtstages eine vernünftige Erinnerung erhalte, und nicht wie vom Outlook-Eintrag nachts um 23:45 !

  • Hallo Liebe User,  wir haben ein kleines Problem, bei dem uns der Eine oder Andere hoffentlich weiter helfen kann. Wir besitzen einen Mac Pro Retina Laptop, ein Mischpult X1204 USB von Behringer und ein Mikro NT1-A von Rode. Das Mikro ist am Mischpult ang

    Hallo Liebe User-,
    Wir Haben Ein kleines Problem, bei der DM UNS Eine oder Andere Hoffentlich weiter Helfen Kann. Wir besitzen einen Mac Pro Retina Laptop, Ein Mischpult Behringer X1204 USB von und Ein Mikro NT1-A von Rode. Das IST-Mikro am Mischpult angeschlossen und Das Mischpult mit Einem USB-Kabel am Laptop. Das Laptop erkennt das. Auch Mischpult und Verdrahtung Konnen UNS DURCH beim singen our Kopfhörer gut hören, Musik Selbst sterben, sterben Wir über youtube abspielen. Auch Karaoke klappt super!! Das einzigste Was nicht klappt Ist Die Aufnahme Über Audacity, sterben in neuem Fenster folgt Nur das. Über Mikro im Laptop. Mittlerweile Glaube ich, bin dass. es Mac oder einer Höhle Einstellungen am Mischpult Liegt.
    Kann UNS Jemand weiter Helfen?? lg

  • Problem with "transitions" in PS Elements 9

    I am a long time Roxio user, but recently purchased PS Elements 9. I find some things vastly superior, while other things seem to be a severe step in the wrong direction. At first glance "transitions" fit into the latter category. My problem is that if I use a simple transition such as a "cross dissolve" the transition is not visible at all, even if I lengthen the duraton to a lengthy 10 seconds. I'm hoping that the problem is simply  that I am new to PSE and that I am not doing somthing correctly. BTW, if I use a transition such as a page turn, it works fine, which only makes the invisibility of the dissolve all the more puzzling.

    The A-B Roll editing was the only way to do it, back in the days of film. One created one reel, with the footage alternating between segments of black leader. The second reel was created with black leader in the places where the A Roll had footage, and footage, where the A-Roll had black leader. The footage overlapped by 1/2 of the desired Duration of the Transition - Cross-Dissolve, and both the A-Roll and the B-Roll were printed onto a single reel of film by the lab. The editor had to account for the Handles, or the Cross-Dissolve did not work in the print.
    There were basically 3 Transitions possible: the Butt-Cut, Fade-to-Black (which in Video is most often called Dip-to-Black), and the Cross-Dissolve. The first was just what it sounds like, and the Tail of one Clip was butted to the Head of the next. The junction was either glued, or taped into place. The Fade-to-Black could be done in the lab, or with either the shutter, or the iris in camera. The latter was done primarily in the lab, though I had one camera that allowed for a Cross-Dissolve, by rewinding the last footage by a number of Frames, and then with the adjustment of the shutter angle, a Cross-Dissolve was created. One had to count carefully, or that Transition would be lop-sided, and not look good and smooth. Basically, this was a controlled double-exposure, created in-camera.
    With Video editing, things improved, and if a switcher was placed between the source video tape machine, and the destination tape machine, more could be done. When NLE's were developed, the A-B Roll layout came along. It was not until several generations later, that single-Track editing became available. For anyone with a film background, the concept of Handles was easy to comprehend, as they had worked with them, in that overlap. Users, new to editing, however, found Handles a very abstract concept.
    I still do a lot of A-B Roll layouts, just like Ted's example, but usually with animated Titles, and PiP compositions.
    Even though I have many hundreds of available Transitions, I still rely almost exclusively on "the Big 3" - Butt-Cut, Dip-to-Black and Cross-Dissolve. Before I would use any other, I would need for it to enhance my "story." I even use the Big-3 to tell part of the story, and each has its place. The audience's concepts of time and place can be enhanced and expanded by their use and by their attributes, such as Duration. I know that this is getting into the realm of "story telling," and gets beyond the mechanics of a Transition.
    Good luck,
    Hunt

  • Problem with transition in elements 11

    Just instaled my elements 11 and trying appying some transitions beetwen clips , drag and drop method which I saw on tutorials dosn't work any idea why ?

    bubu28
    Please state a specific video transition so that we can cross compare to rule out any glitches in a specific video transition. Are all or just some transitions not working for you? For a given transition, do you have problems placing it with all or just some of your video files?
    After you drag and drop the video transition between the clips and then release the mouse, do you ever get the Transition Adjustment Pop Up?
    Approaching this from another angle, that being not enough frames at the end of the first clip and the beginning of the second clip to make the transition work
    Split off a few seconds at the end of the first clip and a few seconds at the beginning of the second clip. Right clip the gap between the two, and click on the pop up Delete and Close Gap. Now try to make the video transition placement.
    If that works, I will go into trimmed and untrimmed clips, how to tell a trimmed clip from a untrimmed clip, and what is going on at the juncture of the two clips when you apply a transition between two clips.
    Thanks.
    ATR

  • Sound problems during transitions?

    Ok, i'm attempting to add a transition between a clip of some Talent Show MCs talking(I'm trying to cut out while they are saying something) right to a person singing, in then middle of a song. The sound is giving me issues, as the MCs keep talking while the singer starts singing, how do i make the sound during the transitions stop?
    Thanks.
    Once the video stops, the audio keeps going, how do i fix it? That's what i need to know...i think.
    Message was edited by: Chanciffer

    I had the same problem - I couldn't figure out how to turn off the sound during transitions, and it was annoying because I had cut my clips exactly where I wanted the sound to end, but the transition does a fade-out with the clip before the transition, and a fade-in with the next clip, so it was adding additional audio that I did not want!
    Here's my work-around:
    (1) Take the clip before the transition, and cut it exactly where you want the sound to end.
    (2) Right click and select "Detach Audio."
    (3) Extend the length of the video clip (at the end) a little for better video during the transition.
    (4) Take the clip after the transition, and cut it exactly where you want the sound to start.
    (5) Right click and select "Detach Audio."
    (6) Extend the length of the video clip (at the beginning) a little bit for better video during the transition.
    Now there will be no sound during the transition, the audio will be perfect, and the transition will look smooth.
    If someone knows an easier way to turn off the sound during a transition, please post it here. If not, I hope these instructions help!

  • Why I am I having problems dragging transitions to the primary timeline?

    Its an odd problem, when I start FCPX and edit, the transitions drag and drop fine to the primary timeline. However at some point during the edit, the drag and drops stop, I can get a skimmer over the transition but not the hand icon. If I try to insert the transition, this fails as well. Closing and restarting FCPX solves the problem but it generally returns after a while editing. Am I doing something wrong here or is it a bug. I am running on a Qaud Core 09 Mac Pro with 12GB of memory.

    Running on Lion, restarting FCP X every 15 minutes is rule number one when working on large projects. Deleting Preferences is really only something you should be doing when FCPX doesnt launch or crashes every minute.
    If all you need is the standard dissolve... Just select the edit point on which you want the transition and hit command+t.
    A last thing you could try, if you do not want to restart FCPX(Which is quite fast) is to go to the projects panel, select a different project, then come back to the current project and try again...
    Sometimes, after a while I cant select my clips anymore, then I switch to a different project and come back to the current one and I can again select my clips...
    Those problems, to me, are only occuring on OS X Lion on Snow Leopard I dont have them. I take it has somethign to do with how Lion handles inactive memory as oppose to Snow Leopard.
    A Lion fix all together would be fantastic.

Maybe you are looking for