Problem between ITS WAS and CFolder

Hello sdn world,
I am working on SRM 4.0 (ITS) with CFolder as repository system, and we have digital signature functionality ( custom bsp page) integrated in the bid invitation process.
I have a dream ops sorry i have a problem when i call the digital signature bsp page from ITS everythings is fine i sign my documents and i generate a document on CFolder System, after the bsp call i am not able anymore to connetc to CFolder system, exactly i receive the logon popup, fill with user and password and it does not seem to recognize anymore the user!!
Waht's wrong i do not understand ? why after the call of bsp the cfolder system does not allow me to connect ??
Thanx in advaced.
massimo

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Similar Messages

Problem between ITS SRM and CFolder

Hello sdn world,
I am working on SRM 4.0 (ITS) with CFolder as repository system, and we have digital signature functionality ( custom bsp page) integrated in the bid invitation process.
I have a dream ops sorry i have a problem when i call the digital signature bsp page from ITS everythings is fine i sign my documents and i generate a document on CFolder System, after the bsp call i am not able anymore to connetc to CFolder system, exactly i receive the logon popup, fill with user and password and it does not seem to recognize anymore the user!!
Waht's wrong i do not understand ? why after the call of bsp the cfolder system does not allow me to connect ??
Thanx in advaced.
massimo

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Externalizable problems between v1.3 and v1.4

Hej you.
I have strange problems with the Externalizable objects.
I Use many Object to Save my file, but wien i try to Externalizable on J1.3 and Denalizable again in J1.4 I got this message:
E:\Programmer\Java\ProrgamName>Java ProrgamName
javax.swing.JInternalFrame; Local class not compatible: stream classdesc serialV
ersionUID=8792953236056021037 local class serialVersionUID=-6387351733537024688
Can i trap J1.4 ID to use 1.3 ID, so it can use on ALL platforms, not just locally?
When I Save and load on the same machine it works fine, but not when i moving to another machine with 1.4. Is a another method, or i Need to save all object to AscII instead in this smart method (that are poorly work)? I have surfed around javasoft.com with finding a answear.
See my early quenstien on (closed):
http://forum.java.sun.com/thread.jsp?forum=31&thread=273990
With very regaards By:
Super Bomba, Denmark
PS. No Duke Dollars this time. Sorry.

Hey.
I found how to work around combatible problems between 1.3 and 1.4. For user, that want to save thier DynamicTree.java (http://java.sun.com/docs/books/tutorial/uiswing/components/example-swing/index.html)
Use follow code (I using Externalizable):
protected DefaultMutableTreeNode rootNode=null;
protected DefaultTreeModel treeModel=null;
public void writeExternal(ObjectOutput stream) throws IOException
{ stream.writeUTF(rootNode.toString());
    Vector values = new Vector();
    Object root = treeModel.getRoot();
    // Save the root, if its Serializable.
    if(root != null && root instanceof Serializable)
    { values.addElement("root");
      values.addElement(root);
    stream.writeObject(values);
public void readExternal(ObjectInput stream) throws IOException
{ thisModel.removeAll();
    thisModel.setVisible(false);
    try
    { String title=stream.readUTF();
      rootNode = new DefaultMutableTreeNode(title);
      Vector values = (Vector)stream.readObject();
      int indexCounter = 0;
      int maxCounter = values.size();
      treeModel = new DefaultTreeModel(rootNode);
      if(indexCounter < maxCounter && values.elementAt(indexCounter).equals("root"))
      { TreeNode root = (TreeNode)values.elementAt(++indexCounter);
        treeModel = new DefaultTreeModel(root);
        indexCounter++;
      // kode for setting the tree start here
    catch (ClassNotFoundException e) {}
}Hope, this is to use :-)
Hi from
Super Bomba

Connection Problems Between iChat 3 and iChat 4 Workaround

Maybe this info will help others:
iChat 4/Leopard users must initiate video chat to iChat 3/Tiger users:
I have discovered that if an iChat 4/Leopard user initiates the video chat to an iChat3/Tiger user, it works, but if the iChat3/Tiger user initiates the video chat with an iChat 4/Leopard user it fails with a message saying that the receiver declined the invitation (even if the receiver tried to accept). This happens on a LAN as well as across the Internet.
Likewise, to make conference video chats, make sure the iChat 4/Leopard user initiates, then adds the other parties.
This post is NOT about iChat Server, although the problem occurs there too. If you are using iChat Server (part of OSX Server) see http://discussions.apple.com/thread.jspa?messageID=5995966 ).
Hope this helps.
ppj

Hey.
I found how to work around combatible problems between 1.3 and 1.4. For user, that want to save thier DynamicTree.java (http://java.sun.com/docs/books/tutorial/uiswing/components/example-swing/index.html)
Use follow code (I using Externalizable):
protected DefaultMutableTreeNode rootNode=null;
protected DefaultTreeModel treeModel=null;
public void writeExternal(ObjectOutput stream) throws IOException
{ stream.writeUTF(rootNode.toString());
    Vector values = new Vector();
    Object root = treeModel.getRoot();
    // Save the root, if its Serializable.
    if(root != null && root instanceof Serializable)
    { values.addElement("root");
      values.addElement(root);
    stream.writeObject(values);
public void readExternal(ObjectInput stream) throws IOException
{ thisModel.removeAll();
    thisModel.setVisible(false);
    try
    { String title=stream.readUTF();
      rootNode = new DefaultMutableTreeNode(title);
      Vector values = (Vector)stream.readObject();
      int indexCounter = 0;
      int maxCounter = values.size();
      treeModel = new DefaultTreeModel(rootNode);
      if(indexCounter < maxCounter && values.elementAt(indexCounter).equals("root"))
      { TreeNode root = (TreeNode)values.elementAt(++indexCounter);
        treeModel = new DefaultTreeModel(root);
        indexCounter++;
      // kode for setting the tree start here
    catch (ClassNotFoundException e) {}
}Hope, this is to use :-)
Hi from
Super Bomba

IChat - compatibility problems between v2.1 and v3.1

Hi,
I now have the new iMac Intel with iChat 3.1. I am trying to use it with a friend who has OS 10.3.9 with iChat 2.1.
I can see and hear him, but he can only hear me.
Is there a compatiliby problems between v2.1 and v.3.1 or it is just a configu problems?
Thanks a lot for any information
Bruno

Most likely cause is that you haven't updated the ProApplication Support file. Check here:
http://www.apple.com/support/downloads/proapplicationsupport31macosx104.html

How to solve sync problem between Outlook calendar and iPhone when reminder is set to _some_ non-standard values?

Hi,
I am having a sync problem between my iPhone/iPad and Outlook calendar events (Outlook 2010).
Here is the description of the problem:
1. In Outlook - please create a new event/appointment (e.g. "Test").
2. Reminder is set by default to 15 minutes. You can change it by using a dropdown menu - please select: "0,5 days".
3. Click on "0,5 days" and change it manually to "14,5 days".
4. Click on "Save & Close".
5. (Do not snooze or dismiss the reminder.)
6. Sync with your iPhone/iPad.
7. Open this new event on iPhone/iPad - you can see that alert is set to "15 minutes before" instead to a correct value that was set in Outlook.
The same problem can be seen if you set the reminder to e.g. "3 weeks" (standard value is "2 weeks").
However, it is interesting that non-standard values like "1,5 days" (and all other until "13,5 days") are synced without any problem.
Does anyone have a solution how to solve this problem (different than the trivial solution of not using those strange values)?
Thanks!

Thanks to another post (https://discussions.apple.com/message/17501071#17501071) I reset the sync history, here is what to do:
Launch iTunes.
Before you hook up your iPhone to the PC and iTunes do this: Go to iTunes Edit menu > Preferences… > select the iPhone > click the Reset Synch History button > click OK.
Connect the iPhone to the PC and let iTunes recognize it.
In the top right corner is the iPhone icon, click on the left side of the iPhone icon > the iPhone menu launches.
In the menu along the top click on Info > make your selections > click Sync button > it gives you a dialog at the top with the steps it’s going through during the sync.
In the top left of the iTunes app > click Exit.

Problem between SOAP Sender and JDBC Receiver

Hi,
I have a asynchronous scenary between SOAP Sender and JDBC Receiver.
The idea is sending an ID for updating one register.
Table structure is:
TABLE AS_PERSONA
    (P_RUT                         VARCHAR2(10) NOT NULL,
    P_NOMBRE                       VARCHAR2(50),
    P_APELLIDO                     VARCHAR2(50))
The ID is the P_RUT field.
The structure of message that I send by SOAP, is the following:
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/" xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
     <SOAP-ENV:Body>
          <m:MT_CONS_SOAP xmlns:m="urn:prueba:voliva">
               <CONSULTA>
                    <P_RUT>15445</P_RUT>
               </CONSULTA>
          </m:MT_CONS_SOAP>
     </SOAP-ENV:Body>
</SOAP-ENV:Envelope>
The JDBC receiver structure is:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_CONS_PERSONA xmlns:ns0="urn:prueba:voliva">
     <Statement>
          <AS_PERSONA action="UPDATE">
               <table>AS_PERSONA</table>
               <access>
                    <P_NOMBRE>DELETE_BY_XI</P_NOMBRE>
                    <P_APELLIDO>DELETE_BY_XI</P_APELLIDO>
               </access>
               <key>
                    <P_RUT>15445</P_RUT>
               </key>
          </AS_PERSONA>
     </Statement>
</ns0:MT_CONS_PERSONA>
When I do a call to SOAP by XMLspy, it returns a message without data, that means succesfull reply.
I see message monitor and see the succesfull flag. But in the database it doesn't update the register.
This scenario was proved using the File Sender and same JDBC Receiver, then result was succesfull.
I proved SOAP Sender with a File Receiver, storing information from SOAP sender in an archive, and works well.
Then I imagine that exist some problem between SOAP and JDBC. what could be happening ?
Thanks.

Hi,
Looks like the problem is with the JDBC receiver...try updating the value in the table by using a File-JDBC scenario..does it work..check the adapter monitor in RWB..
Regards,
Sushumna

Connection problem between sap bw and EAI

Hi
Please
I'd like to know why people who work on the part of my EAI project say there is a connection problem between eai and SAP BW. He explained that the connection is good at 12h AM and 16h PM the system was disconnected, he receive this error message:
System.ServiceModel.Security.MessageSecurityException: The HTTP request is Unauthorized with customer authentication scheme 'Basic'. The authentication header received from the server was' Basic realm = "SAP NetWeaver Application Server [DB1/100].
I like to know if this is a problem with sap bw (misconfiguration of authorisations) or at the eai.
Cordialy

Hello,
we have 2 possiblities in BW to get data into BW.
1) pull
2) push
I understodd that you want to push data to BW. Please have a look into the Howto paper: https://www.sdn.sap.com/sdn/developerareas/bi.sdn?contenttype=url&content=/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/how to send xml data to bw
and
https://www.sdn.sap.com/sdn/developerareas/bi.sdn?contenttype=url&content=/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/documents/a1-8-4/how to integrate bw to xi.pdf
If you want to connect an external system to BW and extract data to BW and the BW system is the leading system.
You need a RFC server, or UD connect (https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/943de6c3-0401-0010-b7a4-8b1af193f642) or you can use db connect or you can extract flat files.
All of these possibilies are decribed in the online help and in howto papers.
hope this helps
Michael

Differences between ITS based and web dynpro based ESS

Hi all,
What are the main differences between ( in functionality ) for ITS based and web dynpro based ESS.
I know a few
Underlying technology
ITS ESS had inbox concept, where as web dynpro based ESS/MSS has UWL concept for approvals.
The time statemment in ITS uses smart form while we can use Adobe document services for time statement in ESS 2004.
Funcitonality
There was not collective time approvals option In ITS ESS ( not even in ESS 2004 ) but ther is a collective time apporvals in ESS 2004s
Am not pretty mich intrested in look and feel, or the overview page concept but any additional functionality and a shift in the technology used.
Please add.
regards
Sam
Message was edited by:
        sameer chilama
Message was edited by:
        sameer chilama
Message was edited by:
        sameer chilama

answered

BP change documents ( linking problem between Object id and Business Partner)

Hi,
We need to create a report for documents changed for a Business partner.
This will be done in sap bw.
on source side I have created the datasource with function module changedocument_read and I am getting most of the information
which I want. Only missing part is Business Partner number.
Can somebody suggest , how I would be able to link Object Id to business partner.
I need to pull everything that is changed at BP level and the Object class selection around 30 in number.
So I am looking for any standard function module which can provide me the link between Object id and Business partner.
If I establish the rules to determine the Business partner from Object id , its getting bit difficult.
Can somebody please help/suggest.
I have gone through many documents and scn posts but unable to find anything on this.
Thanks !

Hi, looking at the change history header table CDHDR it seems that object ID simple equals the internal format of the business partner number.

Problems between a WCS and a Location 2710.

I have a Location 2710 that was being seen by the WCS.
It worked fine for almost a day.
But strangely it started to being not seen by the WCS.
I tried to associate again the 2700 with the WCS but I received a message from the WCS:
No response from Location Server. It may be unreachable, or connectivity credentials are incorrect.
And the Location stays as being not seen by the WCS.
I have connectivity with the Location and I can make an ssh session to the Location and see that It is running.
Everything seems to be fine.
Soâ¦ why can't I do the association between the WCS and the Location?
Some one can help me?
Thanks in advance,
Rui

have you restarted the location service and/or rebooted the location appliance or WCS server? Are the WCS and Loc App on the same subnet?
Perhaps firewall rules on either device are getting in the way
The iptables on the loc app should be as follows:
iptables -L
Chain INPUT (policy ACCEPT)
target prot opt source destination
Chain FORWARD (policy ACCEPT)
target prot opt source destination
Chain OUTPUT (policy ACCEPT)
target prot opt source destination

Password synchronization problem between sun DS and ADS

Hi
I installed the sun one indentity synchronization 1.0. I synchronize password between one DS and one AD.It is working fine. My problem is i want to synchronize between two sun one DS and one AD , but it is ignoring the one DS in Sync , anothe DS and AD is Synchronizing. It is not synchrnonizing the two DS and one AD server.
My SUL Configuration is
SUL Name : DS1ToADS
Windows
Base DN : ou=newsync,dc=esecurity,dc=com
Filter : destinationindicator=ameer.com
Creation Expression : cn=%cn%, ou=newsync,dc=esecurity,dc=com
Sun One Directory Server
Base DN : cn=authorization2,dc=ameer,dc=com
destinationindicator=ameer.com
SUL Name : DS2ToADS
Windows
Base DN : ou=newsync,dc=esecurity,dc=com
Filter : destinationindicator=basha.com
Creation Expression : cn=%cn%, ou=newsync,dc=esecurity,dc=com
Sun One Directory Server
Base DN : cn=authorization2,dc=basha,dc=com
destinationindicator=basha.com
I am synchronizing the existing users using the following file.
<?xml version="1.0" encoding="UTF-8"?>
<UserLinkingOperationList allowLinkingOutOfScope="true">
<UserLinkingOperation parent.attr="UserLinkingOperation"
sulid="DS1ToADS">
<UserMatchingCriteria parent.attr="UserMatchingCriteria">
<AttributeMap parent.attr="AttributeMap">
<AttributeDescription parent.attr="SunAttribute" name="sn"/>
<AttributeDescription parent.attr="WindowsAttribute" name="sn"/>
</AttributeMap>
<AttributeMap parent.attr="AttributeMap">
<AttributeDescription parent.attr="SunAttribute" name="employeenumber"/>
<AttributeDescription parent.attr="WindowsAttribute" name="employeeid"/>
</AttributeMap>
</UserMatchingCriteria>
</UserLinkingOperation>
<UserLinkingOperation parent.attr="UserLinkingOperation"
sulid="DS2ToADS">
<UserMatchingCriteria parent.attr="UserMatchingCriteria">
<AttributeMap parent.attr="AttributeMap">
<AttributeDescription parent.attr="SunAttribute" name="givenName"/>
<AttributeDescription parent.attr="WindowsAttribute" name="givenName"/>
</AttributeMap>
<AttributeMap parent.attr="AttributeMap">
<AttributeDescription parent.attr="SunAttribute" name="employeenumber"/>
<AttributeDescription parent.attr="WindowsAttribute" name="employeeid"/>
</AttributeMap>
</UserMatchingCriteria>
</UserLinkingOperation>
</UserLinkingOperationList>
Should not showing the any error after synchronization.
I am giving my log files
resync log
[05/Jan/2005:17:29:12.505 +0530] INFO 66 CNN101 csi2a01 "Sent remote source entry 'dn: 'CN=actusr2,OU=newsync,DC=esecurity,DC=com' [activedirectorydomainname=esecurity.com, employeeid=11112]'." (Action ID=CNN101-10142707E24-10, SN=4)
[05/Jan/2005:17:29:12.958 +0530] INFO 66 CNN101 csi2a01 "Sent remote source entry 'dn: 'CN=actusr1,OU=newsync,DC=esecurity,DC=com' [activedirectorydomainname=esecurity.com, employeeid=11111]'." (Action ID=CNN101-10142707E24-11, SN=4)
[05/Jan/2005:17:29:13.051 +0530] INFO 66 CNN101 csi2a01 "Sent all entries for the 'DS2TOADS' Synchronization User List." (Action ID=CNN101-10142707E24-13, SN=0)
[05/Jan/2005:17:29:14.098 +0530] INFO 66 CNN101 csi2a01 "Sent all entries for the 'DS1TOADS' Synchronization User List." (Action ID=CNN101-10142707E24-14, SN=0)
[05/Jan/2005:17:29:17.442 +0530] INFO 71 CNN100 csi2a01 "Received all remote entries for the 'DS1TOADS' Synchronization User List." (Action ID=CNN101-10142707E24-14, SN=5)
[05/Jan/2005:17:29:18.567 +0530] INFO 62 CNN101 csi2a01 "Received all remote entries for the 'DS1TOADS' Synchronization User List." (Action ID=CNN101-10142707E24-14, SN=10)
[05/Jan/2005:17:29:22.098 +0530] INFO 72 CNN102 csi2a01 "The Windows entry 'dn: 'CN=actusr1,OU=newsync,DC=esecurity,DC=com' [employeenumber=11111, givenname=ameer1] [destinationindicator=[basha.com, ameer.com]]' is already linked to the Directory Server entry 'dn: 'uid=ds1ameer1,cn=Authorization1,dc=basha,dc=com' [employeenumber=11111, destinationindicator=esecurity.com]'." (Action ID=CNN101-10142707E24-11, SN=5)
[05/Jan/2005:17:29:22.098 +0530] INFO 71 CNN102 csi2a01 "The Windows entry 'dn: 'CN=actusr2,OU=newsync,DC=esecurity,DC=com' [employeenumber=11112, givenname=ameer2] [destinationindicator=[basha.com, ameer.com]]' is already linked to the Directory Server entry 'dn: 'uid=ds1ameer2,cn=Authorization1,dc=basha,dc=com' [employeenumber=11112, destinationindicator=esecurity.com]'." (Action ID=CNN101-10142707E24-10, SN=5)
[05/Jan/2005:17:29:22.520 +0530] INFO 73 CNN102 csi2a01 "Received all remote entries for the 'DS2TOADS' Synchronization User List." (Action ID=CNN101-10142707E24-13, SN=5)
[05/Jan/2005:17:29:22.629 +0530] INFO 63 CNN101 csi2a01 "Received all remote entries for the 'DS2TOADS' Synchronization User List." (Action ID=CNN101-10142707E24-13, SN=10)
audit log
[05/Jan/2005:17:29:15.629 +0530] FINE 16 CNN102 csi2a01 "The agent has received an outbound action from MQ: Type: REFRESH SUL: DS2TOADS {Data Attrs: [UNSPEC employeenumber: 11112] [UNSPEC activedirectorydomainname: esecurity.com]} {Other Attrs: cn: actusr2 destinationindicator: basha.com, ameer.com dn: CN=actusr2,OU=newsync,DC=esecurity,DC=com employeenumber: 11112 givenname: ameer2 objectclass: top, person, organizationalPerson, user dspswuserlink: tZeGDb7WM0SW72YcOMzfew== pwdlastset: 127493062677968750 samaccountname: 1234 sn: nagore2 usnchanged: 115104 whenchanged: 20050104100213.0Z}." (Action ID=CNN101-10142707E24-10, SN=3)
[05/Jan/2005:17:29:15.895 +0530] FINE 16 CNN102 csi2a01 "The controller has received the following outbound action from the agent: Type: REFRESH SUL: DS2TOADS {Data Attrs: [UNSPEC employeenumber: 11112] [UNSPEC activedirectorydomainname: esecurity.com]} {Other Attrs: cn: actusr2 destinationindicator: basha.com, ameer.com dn: CN=actusr2,OU=newsync,DC=esecurity,DC=com employeenumber: 11112 givenname: ameer2 objectclass: top, person, organizationalPerson, user dspswuserlink: tZeGDb7WM0SW72YcOMzfew== pwdlastset: 127493062677968750 samaccountname: 1234 sn: nagore2 usnchanged: 115104 whenchanged: 20050104100213.0Z}." (Action ID=CNN101-10142707E24-10, SN=4)
[05/Jan/2005:17:29:16.208 +0530] FINE 16 CNN102 csi2a01 "The agent has received an outbound action from MQ: Type: REFRESH SUL: DS2TOADS {Data Attrs: [UNSPEC employeenumber: 11111] [UNSPEC activedirectorydomainname: esecurity.com]} {Other Attrs: cn: actusr1 destinationindicator: basha.com, ameer.com dn: CN=actusr1,OU=newsync,DC=esecurity,DC=com employeenumber: 11111 givenname: ameer1 objectclass: top, person, organizationalPerson, user dspswuserlink: tfNQqDQ8VEigzgJjrfcVSg== pwdlastset: 127493178093125000 samaccountname: 123 sn: nagore1 usnchanged: 115147 whenchanged: 20050104131009.0Z}." (Action ID=CNN101-10142707E24-11, SN=3)
[05/Jan/2005:17:29:16.926 +0530] FINE 16 CNN100 csi2a01 "The agent has received an outbound action from MQ: Type: SENTINEL SUL: DS1TOADS {Data Attrs: } {Other Attrs: }." (Action ID=CNN101-10142707E24-14, SN=3)
[05/Jan/2005:17:29:16.926 +0530] FINE 16 CNN100 csi2a01 "The controller has received the following outbound action from the agent: Type: SENTINEL SUL: DS1TOADS {Data Attrs: } {Other Attrs: }." (Action ID=CNN101-10142707E24-14, SN=4)
[05/Jan/2005:17:29:16.973 +0530] FINE 16 CNN102 csi2a01 "The controller has received the following outbound action from the agent: Type: REFRESH SUL: DS2TOADS {Data Attrs: [UNSPEC employeenumber: 11111] [UNSPEC activedirectorydomainname: esecurity.com]} {Other Attrs: cn: actusr1 destinationindicator: basha.com, ameer.com dn: CN=actusr1,OU=newsync,DC=esecurity,DC=com employeenumber: 11111 givenname: ameer1 objectclass: top, person, organizationalPerson, user dspswuserlink: tfNQqDQ8VEigzgJjrfcVSg== pwdlastset: 127493178093125000 samaccountname: 123 sn: nagore1 usnchanged: 115147 whenchanged: 20050104131009.0Z}." (Action ID=CNN101-10142707E24-11, SN=4)
[05/Jan/2005:17:29:16.973 +0530] FINE 16 CNN102 csi2a01 "The agent has received an outbound action from MQ: Type: SENTINEL SUL: DS2TOADS {Data Attrs: } {Other Attrs: }." (Action ID=CNN101-10142707E24-13, SN=3)
[05/Jan/2005:17:29:16.989 +0530] FINE 16 CNN102 csi2a01 "The controller has received the following outbound action from the agent: Type: SENTINEL SUL: DS2TOADS {Data Attrs: } {Other Attrs: }." (Action ID=CNN101-10142707E24-13, SN=4)
[05/Jan/2005:17:29:17.442 +0530] FINER 13 SysMgr_100 csi2a01 "Sending an acknowledgement to the console for request (ID=1104926235041)."
[05/Jan/2005:17:29:17.473 +0530] FINE 13 SysMgr_100 csi2a01 "Sent an acknowledgement to the console for request (ID=1104926235041)."
[05/Jan/2005:17:29:17.457 +0530] FINE 71 CNN100 csi2a01 "The agent has received the following inbound action from the controller: Type: SENTINEL SUL: DS1TOADS {Data Attrs: } {Other Attrs: }." (Action ID=CNN101-10142707E24-14, SN=6)
[05/Jan/2005:17:29:17.489 +0530] INFO 71 CNN100 csi2a01 "The agent is sending the following inbound action to MQ: Type: SENTINEL SUL: DS1TOADS {Data Attrs: } {Other Attrs: }." (Action ID=CNN101-10142707E24-14, SN=7)
[05/Jan/2005:17:29:17.504 +0530] FINER 71 CNN100 csi2a01 "The controller has acknowledged the following outbound action to the agent: Type: SENTINEL SUL: DS1TOADS {Data Attrs: } {Other Attrs: }." (Action ID=CNN101-10142707E24-14, SN=8)
[05/Jan/2005:17:29:18.192 +0530] FINE 16 CNN101 csi2a01 "The agent has received an outbound action from MQ: Type: SENTINEL SUL: DS1TOADS {Data Attrs: } {Other Attrs: }." (Action ID=CNN101-10142707E24-14, SN=8)
[05/Jan/2005:17:29:18.364 +0530] FINE 16 CNN101 csi2a01 "The controller has received the following outbound action from the agent: Type: SENTINEL SUL: DS1TOADS {Data Attrs: } {Other Attrs: }." (Action ID=CNN101-10142707E24-14, SN=9)
[05/Jan/2005:17:29:18.676 +0530] FINER 62 CNN101 csi2a01 "The controller has acknowledged the following outbound action to the agent: Type: SENTINEL SUL: DS1TOADS {Data Attrs: } {Other Attrs: }." (Action ID=CNN101-10142707E24-14, SN=11)
Please do the needful
Basha

Hi Joshua,
Does this mean that I need to install the core and sub component but no need to install the DS and AD connectors. No!!! Core must only be installed on one machine! Here is a short summary of the steps during an installation having sun ONE LDAPs in multi-master replication (taking ldap2 as the machine, whrere core is installed):
1. Install core on ldap2
2. start console and configure your directory sources. For the sun directory source enter ldap2 as the preferred and ldap1 as the secondary ldap. Configure the rest: attribute-mapping, modification flow, AD-source, SULs, etc. save the configuration.
3. on ldap2 run idsync prepds untill you get the SUCCESS message in the following way (be sure to specify the secondary ldap with -j and -r options):
idsync prepds -h <ldap2> -p <ldap2port> -j <ldap1> -r <ldap1port> -D "cn=directory manager" -w <passwort> -s <configuration_registry_suffix>4. Run the install binaries again on ldap2. Install DS Connector on ldap2, install DS-Subcomponent (preferred) on ldap2. Install AD-Connector.
5. Copy over install binaries to ldap1. Run the install binaries on ldap1. Give ldap2 as configuration directory URL When you are asked, what components to install, select subcomponent. Select the suffix. When you are asked, what type of ldap, select secondary.
6. Copy over install binaries to any ldap slave in your replication topology and install the subcomponent there, choosing "other" as the ldap type.
Good luck again...
Jakob.

NFS problem between RedHat Client and Solaris Server

Hi all, we are experiencing a problem between a RedHat client and a Solaris 10 server. For the purposes of this post, I'll call the Redhat client server A and the Solaris 10 server B.
Server B is exporting a filesystem that server A is trying to mount. Server A can successfully mount the exported file system, however, strange things are happening. If I change to the exported mount point on server A and create a file, the file is owned by nobody:nobody, not the user that created the file.
A look at the file on server B shows the file has the correct UID and GID (ie the UID & GID of server A).
The fstab file on server A looks like this:
serverB:/data /data nfs4 rsize=32768,wsize=32768,hard,nointr,rw,bg,actimeo=0,timeo=300,suid 0 0
Does anyone have a explanation for this?
NB: There is a firewall between server A and server B. A firewall rule is in place to allow traffic between the two servers on port 2049
Stewart

Hi
If I change to the exported mount point on server A and create a file, the file is owned by nobody:nobody, not the user that created the file.On a NFS share, for security reasons, you normally dont have root provileges.
A file createt as root user will be mapped to nobody:nobody.
The behaviour you see is correct.
If you want the file to be createt as root, you have to export the filesystem with -o ro,anon=0
NFSv3 will be blocked by your firewall.
Franco

Email sync problem between iPad Air and iPhone 6+

Hello,
I have a user that travels quite a bit. We use Office 365 Enterprise
for our emails. He is reporting email sync issues between iPhone and iPad. Meaning
sometimes he will receive emails on the iPhone but not on the iPad or vice versa.
Both devices use the same AT&T network. Does anyone out there have any
suggestions as to what may be causing the sync problem between devices? I am
not sure if the devices ever have the same emails on the inbox. Does this make
sense? I will be happy to provide any other information if needed.
Thank you!

Hey daniel hkn,
Thanks for the question. It sounds like the email account may be configured and setup as a POP account. If so, check out this resource:
Using a POP account with more than one device - Apple Support
http://support.apple.com/en-us/HT201855
When using the same POP email account on more than one device, email messages may appear only on the first device that receives them. This occurs when an email client is configured to automatically remove email from the server after an email client has received it. You can configure your iPhone, iPad, iPod touch, or Mac either to keep a copy of the email on the server, remove it after a certain number of days have passed, or keep it until you move it from your inbox.
Thanks,
Matt M.

Is there a problem between iPhone 4 and Gm vehicle bluetooth?

I have been told by the local Chevrolet dealership that there is a problem(known) between the 2011 and 2012 Gm Bluetooth and the Iphone4. The story is that "they" whoever that may be are fixing it and the systems will update automatically in the next two to three months.
I wonder how much truth there may be in this.

As in, how the screen's pixels display colors? No, there shouldn't be any difference.

Problem between ITS WAS and CFolder

Similar Messages

Maybe you are looking for