Problem booting (Still need help)

OK. Sorry about the length. Just trying to be thorough.
I have MSI i875 Neo FIS2R. It has been running fine for about 6-7 months. About 3 days ago it started randomly restarts. The first day it was 2 times. 2nd day it was like 15 times, and yesterday it wouldn't stop. :(
It started running in circles booting and getting to the start of Windows, and booting again. I was starting to get pissed. I started looking at why it keept doing it and I slowed down the bootup. The color on the screen is of. In CMOS I get Black squares all over. kind of wierd looking. On the initial boot where it counts RAM etc. I have 3-4 Light blue lines highlighting some of the text and some broken text in red floating all over. Even worse is it when I get to the map address of sound etc.
Yesterday evening the PC refuse to post anything to the screen, so I thought GFX. I tested it in my neighbour machine, and it worked fine.
I don't know how, but after removing the GFX and putting it back a couple of time I got the computer back to booting cycle with wierd colors.
The 4 led's run all the way through boot and light 4 green.
No I was getting frustrated. I took all hardware out. Put in neccesary stuff and a new HD. It won't even let me install Windows again. I can boot sometimes to where I can run win install, but it has to restart so many time during install and hence a problem.
I have tried resetting the BIOS with the jumper, I have had the battery out for app. 30 minutes... I am at a loss. Please help.
Sune
MSI mobo as above
P4 Northwood 3.0, 800bus
2 X Samsung 512 DDR3200
MSI Geforce4 TI4800SE
Maxtor HD's
Zalman cooler -> 36 degrees C

Not exactly sure of which numbers, so I will give you all of them.
AC input: 115V 8A
230V 5A (this is me)
Frequency : 50-60 Hz
Max Loa: 390W
then DC Output: (in this order)
+5V +3,3V +12V -5V -12V +5VSB
35A 28A 17A 0,3A 0,8A 2A
220W 204W
1,5W 9,6W 10W
340W Max.
Thats is all the numbers on my powersupply.
And by the way. I really appreciate you guys helping me.
Sune
Just tested my Ram as well. they both work on another machine. I have tried them seperatly as well. The same still happens with new Ram. So I am guessing I can rule this out?

Similar Messages

Hi everybody.. i have a problem nad i need help a.s.a.p ... i forgut my ipad passcode and tryed to remember it tell it locked and i cant get open .. it says connect to itunes .. i did that and its still not opening? what can i do? thanks

hi everybody.. i have a problem nad i need help a.s.a.p ... i forgut my ipad passcode and tryed to remember it tell it locked and i cant get open .. it says connect to itunes .. i did that and its still not opening? what can i do? thanks

http://support.apple.com/kb/HT1808
Regards.

Still need help with flash player download

I'm still having a problem with the flash player, please read my last post below:
"I've tried everything here & still can't download the flash player. Anytime I try to download it asks me to install ADM add-on and then when I click on that, my computer freezes. How do I enable this add-on without my computer freezing? Can anyone help pls?"

Thanks a lot for your help, it is truly appreciated.
Date: Thu, 29 Oct 2009 18:52:38 -0600
From: [email protected]
To: [email protected]
Subject: Still need help with flash player download
You can set Flash Player to check for updates on the Global Settings Manager panel:
http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager05.htm l
>

Still need help with case sensitive strings

Hello guy! Sorry to trouble you with the same problem again,
but i still need help!
"I am trying to create a scrypt that will compare a String
with an editable text that the user should type to match that
String. I was able to do that, but the problem is that is not case
sensitive, even with the adobe help telling me that strings are
case sensitive. Do you guys know how to make that comparison match
only if all the field has the right upper and lower case letters?
on exitframe
if field "t:texto1" = "Residencial Serra Verde"then
go to next
end if
end
|----> thats the one Im using!"
There were 2 replys but both of them didnt work, and the
second one even made the director crash, corrupting even previously
files that had nothing to do with the initial problem..
first solution given --
If you put each item that you are comparing into a list, it
magically
makes it case sensitive. Just put list brackets around each
item.
on exitframe
if [field "t:texto1"] = ["Residencial Serra Verde"] then
go to next
end if
end
Second solution given--
The = operator is not case-sensitive when used on strings,
but the < and > operators are case-sensitive.
So another way to do this is to check if the string is
neither greater than nor less than the target string:
vExpected = "Residencial Serra Verde"
vInput = field "t:texto 1"
if vExpected < vInput then
-- ignore
else if vExpected > vInput then
-- ignore
else
-- vExpected is a case-sensitive match for vInput
go next
end if
So any new solutions??
Thanks in advance!!
joao rsm

The first solution does in fact work and is probably the most
efficient way
of doing it. You can verify that it works by starting with a
new director
movie and adding a field named "t:texto1" into the cast with
the text
"Residencial Serra Verde" in the field. Next type the
following command in
the message window and press Enter
put [field "t:texto1"] = ["Residencial Serra Verde"]
You will see it return 1 which means True. Next, make the R
in the field
lower case and execute the command in the message window, it
will return 0
(true).
Now that you know this works, you need to dig deeper in your
code to find
what the problem is. Any more info you can supply?

Sometimes my iphone 5S produces low sound even on full volume level. Then i do restart it. But i am not sure where exactly the problem is? Need help.

Sometimes my iphone 5S produces low sound even on full volume level. Then i do restart it. But i am not sure where exactly the problem is? Need help.

Hi saiyed adil,
Thank you for contributing to the Apple Support Communities.
It appears that your iPhone 5s sometimes produces low sound, but a restart corrects it.
It can take some time to isolate and resolve intermittent issues like this one, and I'd recommend going through the steps in this guide the next time it occurs:
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker - Apple Support
All the best,
Jeremy

Using 2006 iMac running Mac OS 10.6.8. My iTunes App (11.3.1) will not launch. Upgraded to iTunes (11.4) but problem persists. Need help.

Using 2006 iMac running Mac OS 10.6.8.
My iTunes App (11.3.1) will not launch.
Upgraded to iTunes (11.4) but problem persists.
Need help.

I have no answers for ya, but I do have the same problem, so we are not alone in this.
My iTunes stopped working after I did a couple of software updates that got my iTunes up to v. 11.4. Since that update, I can't get iTunes to open at all, neither from my dock nor from the Applications menu.
I'm wondering: Perhaps these latest iTunes updates are simply too advanced for my 10.6.8 operating system? If that's the case, how can I backtrack to an earlier version of iTunes that is compatible with my computer OS?
Any thoughts?

I still need help with the Dictionary for my Nokia...

I still need help with the Dictionary for my Nokia 6680...
Here's the error message I get when trying to open dictionary...
"Dictionary word information missing. Install word database."
Can someone please provide me a link the where I could download this dictionary for free?
Thanks!
DON'T HIT KIDS... THEY HAVE GUNS NOW.

oops, im sorry, i didnt realised i've already submitted it
DON'T HIT KIDS... THEY HAVE GUNS NOW.

I had to remove Mavericks and do a reinstall on 10.8.5 but still need help...

I have been trying to undo my Mavericks upgrade in October and after considerable effort I am mostly got back to 10.8.5 OS but still need a bit of help. I just want the previous OS back in place then I'll try Mavericks soon....
1)               I never seem to pay attention so is 10.8.5 the last OSX prior? As long as it isn't Mavericks, I want to get it installed.
2)               I had to reformat my iMac so I have a residual elements from 10.9 and one issue that I had before was permissions. Every number of files either on other hard drives or sometimes in my same user folder was asking for permission and authentication to simply move a file.. A popular one you'll see at the bottom the person/whatever/ problem known as fetching. Could someone just give me the general reason of this fetching and permissions problem that I ran into? Better yet since I just want to avoid it altogether into the future tell me what's the best way to assure it disappears forever.
3)          Another, which is kind of a big ticket item for me is the backup/restore/cover your (!!!) system. I was a good little iMac User and had Time Machine backed up for a period prior to the Mavericks install. I'm a little bit upset that TM isn't 100%....but what is...? I need another backup/restore system in place and that's what I am looking for recommendations on. An item that saved me a bit was that I had OS 10.8.3 on an external hard drive. The problem with that one was it was on a partition, on one of the drives requiring to be reformatted. It worked as a bridge consolidating files and all but was a big headache as a partition on the external. Recovery Disk did it's part but wasn't enough as well.   Is there a simple/easy idea...clone, disk images, boot from an external drive… ?
4)          iPhoto (9.4.3) currently will not open the libraries which iPhoto (9.5) converted. Is there way to go back? Seems the App Store and Software update don't like something. I'm getting into a loop with App Store, iPhoto and the OS. Either the software needs operating system ... then the App Store says it's incompatible or some other complaint. Right now I have 9.4.3 iPhoto installed for OSX 10.8.5 and was only able to create a new library and the converted ones currently do not open.
Thanks to your help

10.8.5 is the lates ML edition. I use TM and also carbon copy cloner as my second backup. If I were you and you have a TM backup prior to Mavericks I would try another restore at bootup. You should erase your drive first in that process using disk utitlites and then use TM to put back you apps and files. The other choice is to do an internet recovery and then use TM to restore your apps and files. That should fix the permissions issue. I did the same thing and all was OK including getting my original iPhoto progam (9.4.3), iphoto11 and photos back.

I try signing into iMessage and it takes about 45-50 seconds to do. When that happens it tells me there is a network problem. I am positive I don't have a network problem and I need help on this problem please??

I try to sign in and it just takes forever to do I try and try and do it over and over and it brings me the same results. Created a new Apple ID and when I did it still tells me there is a network problem. But the thing is I am still able to use the Internet I need help?? And it does the exact same thing for FaceTime so I don't know what to do??

Error -3259 is a network timeout error, usually. This article might help:
http://support.apple.com/kb/TS2799

ITunes Error Message. Still need help. Please.

I still haven't been able to use my ITunes for about two months. I need help to fix the problem. Here's what it says when I try to start ITunes:
Microsoft Visual C+ + runtime library
Runtime Error!
Program: C:\program files\itunes\itunes.exe
This application has requested to terminate in an unusual way. Please contact the application’s support team for more information.
If anyone can help me with this I would greatly, greatly appreciate it. Thanks.
Windows XP

Have you tried un-installing iTunes, downloading the program again from Apple, and re-installing?
It's always worth a try, as it should help you clear off anything causing the problem and start again.

T60 wont boot ~ I NEED HELP ~

H'ok.. So I was going to try to fix my friends T60 but I'm worried this is kinda over my head..
She came to me and said the OS was currupt and asked me to install a new os onto her laptop..
I was only able to install anything when the built in Wireless card was disabled..
Whenever you enable the wireless card, windows wont boot (all versions) nor will Windows installer boot..
Linux will boot though with the wireless card enabled.. but wont see a wireless network.
I've checked the hard drive and the ram.. both are ok.
I tried swapping the wireless card, but that didn't fix the problem..
Could it be the motherboard?
I need help! PLEASE WILL SOMEONE HELP!
~Jonny B

Could you try doing a system update using an ethernet cable? What OS are you using?
ThinkVantage System Update here:
http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-66956
Here is the link for the ThinkVantage Productivity Center download:
http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-61378
Think link lists all of the available ThinkVantage Technology Tools for your T61:
http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-61432#productivity
Let us know if that helps.
Did you find a post awesome? A great response? Kudo them!
Did the post you read answer your question? Did someone help you figure out your problem? Hit Solution Provided and give that person a 'thank you' for helping you out!

My iphone got frozen [still need help- tried all the solutions but still ca

i can not solve this problem so i need your help, users and apple's team
please take a look at 2 pics below.
it took me more than 2hours but i could not solve it.
why did i have this problem:
1/ i was trying to put some mp3 into my iphone and while i was doing it. i got an update for my iphone so i clicked it and was waiting for it [ it was a large file- hundred mb- i can not remember exactly].
after that my iphone got problem. then i tried to find a solution on google+ apple's support but i could not solve it even i tried it .
http://support.apple.com/kb/TS1275
please take a look at the picture. my iphone 's screen is now like that picture but there is a small icon lock above the itunes and on screen of my computer.[ itunes program] i got a message
http://img40.imageshack.us/i/53200293.jpg/
i took out the sim then turn on the iphone but still got the same problem.
is there anyway to fix it? i was trying to talk to an agent but they asked me to purchase bs... -money for phone then now money for...bs]
thank guys.
Message was edited by: percy123456789
Message was edited by: percy123456789
Message was edited by: percy123456789
Message was edited by: percy123456789
Message was edited by: percy123456789

The only results I'm finding refer to sites that talk about jailbreaking iPhones.
My only suggestion is to try restoring your iPhone, or to visit an AT&T store(assuming you're in the US) for a new SIM.
~Lyssa

I still need help. i am technically challanged. i up graded my phonr to a 5 s. i backed up my phone on icloud. i cAn not get my notes or photos. it looks like the icloud email address is wrong. how can i change it or get my missing items

I need help. I am not good with technology. I upgraded phone today to 5 s I am missing notes and photos it looks like the cloud address is not correct. Any suggestions

Have you forgotten your password? - if so, you have a problem if the email address has gone dead.
If you know your password, go to the iTunes Store, click on Account. log in and you can change the associated email address.
If you don't know your password, and have no email address, you are going to have problems because it's difficult to see how Apple are going to identify you as the authorised owner of the account. Contact iTunes Support: go to http://www.apple.com/support/itunes/ - click on 'Other iTunes Store Features' in the list and then on 'Podcasts'. You will see a link to either 'Express Lane', which will guide you eventually to some contact options, or you may see a link to email them.

I have a REAL problem that I need help with

many thanks to kglad for all his help last week with a problem but it hasn't fully sorted it out. I have a site with 908 buttons. Basically a person clicks a button, makes a donation (through paypal) and then that button gets their name displayed when the mouse hovers over it. Essentially the button becomes the property of the person who makes the donation. The problem I need help with is how to disable each button when someone clicks it. Disabling a button isn't the problem. I need it disabled only when the person has made a valid donation. Each button has a unique instance name (b001 - b908). There must be a way.
Many thanks in advance.

I can't get this to work at all. At this stage, I'm considering a complete restructure of the site in dreamweaver.
I would love to be able to complete it in actionscript though as I would be learning something new.
When a user clicks a button, and goes through the paypal process, I need the clicked button to be disabled.
It has to be such that it gets disabled only when a user has made a donation through paypal. For example, plenty
of people may just click on the buttons as they are checking the site out, without any intention of using the paypal
facility. This is just human nature. Obviously, I don' t want any buttons disabled under these circumstances.
I was thinking, do I need a statement such as .......... "on returning from paypal, disable the clicked button"
Or is it just a case of......... "on returning from paypal, remove the event handler"
Or is it something completely different, I require, (please don't say a brain would be helpful).
Is there some generic code out there that could help me out please.

Problem burning DVDs, NEED HELP QUICK

Hey,
I need help as soon as possible. I am using iMovieHD 5.0.2, along with iDVD 5.0.1. I have made a movie about 8 minutes long and all in all it totals 7.68Gigs, and i've tried burning it to a dvd. I did all the steps it says to, going to Share, sharing it with iDVD, then trying to burn it in iDVD. Yet whenever it asks me to insert a recordable dvd, i do, and the computer fails to recognize it. I am using a DVD-R, 4.7GB discs, 4x. I then realized that the movie i was trying to burn was larger than this disc, which might be the problem. I then created a 200mb movie and tried, but the same problem happened. My G5 is not recognizing the blank dvds, yet when i insert a dvd that was made a while ago from a different source, yet the same type of dvd, it plays fine.
The problem seems to be in recognizing the blank DVD, and im pretty sure that its compatible with this computer, being that it plays when theres already a movie on it.
Can someone please help me quickly, this is for a production company and we're losing out every day that i dont get this done. Thanks a million.

I don't have an answer, but as an initial diagnostic step, try loading a blank DVD while iDVD is not running. First open your System Preferences and select the CD/DVD icon. Make sure the options selected do not say "Ignore". Then load a blank disc. Depending on your preferences, you should get some sort of reaction - either a burn window opens or you get a prompt asking you what to do. If there's no reaction from the Finder, it would indicate that the drive is not recognizing the blank DVD. This would be either a hardware or a media compatibility problem. Only way to tell for sure is to run out and try a different brand of media.
- Andy
PowerMac G5 dual 2.5 Mac OS X (10.4.4)

Problem booting (Still need help)

Similar Messages

Maybe you are looking for