Problem booting up from the CD for Mac OS Version 10.6.2
Hello everyone,
I have a 27" iMAC which I have been using for awhile. A few months back, I managed to set up Boot Camp successfully on the iMAC and been using the Windows OS for that period. Whenever I turn on the computer, I will definitely hit Alt/Option key, type in the password and select the Windows Hard Disk to boot up in. I'm finally done with my personal project and wanted to go back onto my Snow Leopard OS. Lo and Behold, whenever I select the Mac Hard Disk, the grey Apple logo with a loading sign appears and the problem is this screen is a permanent one. So I would like to seek your help in assisting me to solve this problem.
In addition, I tried inserting the CD and booting from the CD by pressing 'C' but I still get the grey apple and loading icon. I also tried restarting in safe mode(Hold down shift mode) but that didn't work either.
I will gladly provide any details if there is a need and also perform any actions that you recommend. Thank you everyone for your help.
Sorry if this is a shameless bump but are there any kind souls around?
Similar Messages
-
Problem sending emails from Entourage 04 for Mac
Hello, hope this is the right forum, does anyone use Microsoft's Office/Entourage 04 for Macintosh for email? Perhaps you can help:
Suddenly I can't SEND emails from six "sub" accounts I have, and get the error message "From: address not verified". These are all normally sent via a single primary (BTInternet.com) address which is entered in the "Sending Mail" account section and has been been set up like this for a year on my iMac.
A seventh sub-account used by my partner on a different computer (PC using Outlook) also sends emails via the same primary address - and works fine..
Obviously there is a problem logging to this primary address specifically in my Entourage.
There is nothing wrong with the primary's own set-up because I can send messages from that (and the "sending" info is identical).
(Also note: I can RECEIVE emails to all the accounts, no problem).
Unless I've inadvertently clicked something I shouldn't, I'm mystified.
I'm stuck as I use use one of the "subs" all the time. Help!After much research and help (on another site forum!) it turns out this is a BTYahoo! mail fault affecting many BT accounts (in the UK at least). Why they are messing accounts around I don't know.
If anyone finds they can't send via a BT account just find another server and enter their details and all will work again - as I've discovered after a day trawling the ether! -
Hello, I am running Mac os 10.6.8. It is shutting down without warning when I walk away from the computer for about 5 minutes. It happened twice. It was not asleep, i had to turn the computer back on...Any ideas...
G. MendelCrashes
The next time the problem happens, note the date and time the problem occurred, then go to Applications/Utilities/Console and copy the log starting at the time of the crash. Paste the log in a reply. Please do not use a screen shot as they can be hard to read. If there are repeated runs of the same messages, please post only one run. Be selective about what you post and don’t post huge amounts. Make sure there is no personal data visible. Information learned from Linc Davis. -
I've recently update to Yosemite, ever since my Mac won't boot up from the grey screen
ive recently update to Yosemite, ever since my Mac won't boot up from the grey screen, I've checked on the utilities and disk can not be repaired. I'm gutted is it dead?.........how can I solve this......help please
<Re-Titled By Host>Did you mean Command + Option + R for internet recovery?
The only key commands I know that involve P is a PRAM reset:
https://support.apple.com/kb/PH11243?viewlocale=en_US&locale=en_US
Or maybe I am missing or misunderstanding something? -
I bought versions for iPad and for MacBook. At synchronization of documents on MacBook all smilies from the Emoji keyboard disappeared. It is impossible to insert them into the text manually.
Smiles of Emoji are supported by the program for Mac?
Help to solve a problem, please.Same thing happened to me with my peruvian credit card in the peruvian app store, I want to buy an app, but it says that my credit card is "not supported in the Peruvian app store"
-
I was able to run windows xp on maverick for several months now it's asking my to insert boot cd from the startup
My computer is 2007 MacBook Pro I'm using the Maverick operating system. I was able to run windows xp on bootcamp until last week when I held down the option button during the startup to click on windows it's wasn't there, only the mac and recovery system where there. So when I went on my mac partition the bootcamp file system was still on my desktop and all the files where there. Then I tried to select the disk to startup to and found the windows system there clicked on it restarted my computer and it said please insert boot disk and press any key to continue
-
Exporting selected contacts from Outlook 2011 for Mac
I've wanted to easily export a set of selected contacts from Outlook in Microsoft Office for Mac 2011. I've been through many threads about synching to Address Book and then exporting, but I've found a host of troubles, including duplicate copies of contacts being created.
So, I finally broke down and wrote an AppleScript script to export all of the currently selected contacts from Outlook to a file in either vcf (vcard) or csv (comma separated value) format. The best use of this script is to:
-- Install this as a script in Microsoft Outlook by saving the script below to Documents>Microsoft User Data>Outlook Script Menu Items
-- Change to your Contacts in Outlook. Use the Outlook search bar to find the contacts you want to export. You might search by name, category, company, or anything else that identifies the contacts you want to export. Or, you might just leave the view showing all contacts.
-- Select the contacts you want to export
-- Launch the script
The script will have you select between vcard and csv and select a destination file. This hasn't been optimized for speed, so if you're exporting 100's or 1,000's of contacts, be patient. And there isn't a progress bar at present, so you have to wait. It will display an alert when it's complete.
Sorry not to have a download location for you. You'll just have to copy the script text :-). Keep in mind there's been some but limited testing. Read the comments for details. And enjoy.
-- jsc
-- Export Outlook Contacts
-- (c) 2012 J. Scott Carr. The script is made available for free use, with no
-- warranty, under the Creative Commons license agreement.
-- This script has only been tested on Mac OS X 10.6.8 with Micrsoft Outlook for
-- Mac 2011 version 14.1.4.
property byCategory : "By category"
property byPattern : "Names matching pattern"
property vcardFormat : "VCard"
property csvFormat : "CSV"
-- main
set contactsToExport to {}
-- Get the contact selection
set contactsToExport to get_contacts_to_export()
if (count of contactsToExport) is 0 then
display alert "Please select contacts to export and rerun script" as warning
return
end if
-- Shall we export to vcard or CSV?
set theFormat to vcard_or_csv()
if theFormat is "" then
display alert "Error: Must select VCard or CSV format" as warning
return
end if
-- Get and open the output file
set oFile to open_output_file(theFormat)
if (oFile is equal to -128) then
display alert "Canceled"
return
else if (oFile < 0) then
display alert "File open failed (" & oFile & ")" as warning
return
end if
-- Export the contacts
display dialog "About to export " & (count of contactsToExport) & " contacts in " & theFormat & " format. Proceed?"
if button returned of result is not "OK" then
try
close access oFile
end try
return
end if
if theFormat is vcardFormat then
export_to_vcard(contactsToExport, oFile)
else if theFormat is csvFormat then
export_to_csv(contactsToExport, oFile)
else
display alert "Invalid format" as warning
end if
close access oFile
display alert "Complete"
return
-- get_contacts_to_export()
-- We're going to export the Contacts currently selected in Outlook.
-- Check that the current selection is Contacts and not some other Outlook
-- object. Snag the selected Contacts and return them as a list.
-- A side note. When I started this, I built options to enter a matching
-- name string or select a category. And then it hit me that those features
-- are much more robust in Outlook, and it would be easy to just use the
-- current selection.
-- There is some strange behavior that Outlook needs to have recently been
-- the front, active window.
on get_contacts_to_export()
set selectedContacts to {}
tell application "Microsoft Outlook"
set theSelection to selection
if class of theSelection is list then
if class of the first item of theSelection is contact then
copy theSelection to selectedContacts
end if
else
if class of theSelection is contact then
copy theSelection to selectedContacts
end if
end if
return selectedContacts
end tell
end get_contacts_to_export
-- vcard_or_csv()
-- Get the format to use when exporting contacts
on vcard_or_csv()
choose from list {vcardFormat, csvFormat} with prompt "Select export file format:"
if result is false then
return ""
else
return first item of result
end if
end vcard_or_csv
-- open_output_file()
-- Open the destination file for the export, returning the file descriptor or the error number
-- if the operation fails
on open_output_file(exportType)
-- Get the filename, letting "choose file name" deal with existing files.
set theDate to current date
set theTime to time of theDate
if exportType is csvFormat then
set fileName to "contacts.csv"
else
set fileName to "contacts.vcf"
end if
try
set outputFile to choose file name with prompt "Select export destination file" default name fileName
on error errText number errNum
return errNum
end try
-- Open the file
try
-- Open the file as writable and overwrite contents
set oFile to open for access outputFile with write permission
set eof oFile to 0
on error errText number errNum
display alert "Error opening file: " & errNum & return & errText as warning
try
close access oFile
end try
return errNum
end try
return oFile
end open_output_file
-- export_to_vcard()
-- Export each of theContacts to the open file outFile as a set of vcards. Note that the
-- vcard data is from the "vcard data" property of the theContacts. This routine
-- doesn't attempt to reformat an Outlook vcard, nor limit the fields included
-- in the vcard.
on export_to_vcard(theContacts, outFile)
set vcards to {}
tell application "Microsoft Outlook"
repeat with aContact in theContacts
copy vcard data of aContact to the end of vcards
end repeat
end tell
repeat with aCard in vcards
write (aCard & linefeed) to outFile
end repeat
end export_to_vcard
-- export_to_csv()
-- Export each of theContacts to the open file outFile in csv format
on export_to_csv(theContacts, outFile)
set csvFields to {}
-- Get the fields of the contact to export
set csvFields to init_csv()
-- Write the header row
set nFields to count csvFields
write first item of csvFields to outFile
repeat with i from 2 to nFields
write "," & item i of csvFields to outFile
end repeat
write linefeed to outFile
-- Export the fields of the contacts in CSV format, one per line
repeat with aContact in theContacts
write build_csv_line(csvFields, aContact) & linefeed to outFile
end repeat
end export_to_csv
-- init_csv(): defines the fields to export when csv format is selected
-- Each of the fields in the list must match a name used in the routine build_csv_line().
-- The idea is to later create a a pick list so the user can select which contact properties
-- to export.
on init_csv()
set csvFields to {"first name", "last name", "middle name", "title", "nickname", "suffix", "phone", "home phone number", "other home phone number", "home fax number", "business phone number", "other business phone number", "busines fax number", "pager number", "mobile number", "home email", "work email", "other email", "company", "job title", "department", "assistant phone number", "home street address", "home city", "home state", "home country", "home zip", "business street address", "business city", "business state", "business country", "business zip", "home web page", "business web page", "note"}
end init_csv
-- build_csv_line(): format one line for the csv file
-- Parameter csvFields determins which fields to include in the export.
-- Unfortunately I've not figured out how to use perl-style generation of
-- indirect references. If I could, this would have been much more elegant
-- by simply using the field name to refer to a Contact properly.
-- Note that email address are a special case as they're a list of objects in
-- Outlook. So these are handled specially in the export function and can only
-- be selected by the column names "home email", "work email", and "other email".
-- Outlook allows a contact to have more than one of each type of email address
-- but not all contact managers are the same. This script takes the first of
-- each type. So if a contact has more than one "home" email address, you will
-- only be able to export the first to a csv file. Suggest you clean up your
-- addresses in Outlook to adapt. The alternative is to support multiple
-- columns in the csv like "other email 1" and "other email 2", but that's not
-- supported in this version.
-- Another note. In this version, any embedded "return" or "linefeed" characters
-- found in a property of a contact are converted to a space. That means that
-- notes, in particular, will be reformated. That said, this gets arond a problem
-- with embedded carriage returns in address fields that throw off importing
-- the csv file.
-- Also note that at this time IM addresses aren't supported, but it's an easy add
-- following the same logic as email addresses.
on build_csv_line(csvFields, theContact)
set aField to ""
set csvLine to ""
set homeEmail to ""
set workEmail to ""
set otherEmail to ""
tell application "Microsoft Outlook"
set props to get properties of theContact
-- Extract email addresses from address list of contact
set emailAddresses to email addresses of props
repeat with anAddress in emailAddresses
if type of anAddress is home then
set homeEmail to address of anAddress
else if type of anAddress is work then
set workEmail to address of anAddress
else if type of anAddress is other then
set otherEmail to address of anAddress
end if
end repeat
-- Export each desired fields of the contact
repeat with aFieldItem in csvFields
set aField to aFieldItem as text
set aValue to ""
if aField is "first name" then
set aValue to get first name of props
else if aField is "last name" then
set aValue to last name of props
else if aField is "middle name" then
set aValue to middle name of props
else if aField is "display name" then
set aValue to display name of props
else if aField is "title" then
set aValue to title of props
else if aField is "nickname" then
set aValue to nickname of props
else if aField is "suffix" then
set aValue to suffix of props
else if aField is "phone" then
set aValue to phone of props
else if aField is "home phone number" then
set aValue to home phone number of props
else if aField is "other home phone number" then
set aValue to other home phone number of props
else if aField is "home fax number" then
set aValue to home fax number of props
else if aField is "business phone number" then
set aValue to business phone number of props
else if aField is "other bsiness phone number" then
set aValue to other business phone number of props
else if aField is "bsuiness fax number" then
set aValue to business fax number of props
else if aField is "pager number" then
set aValue to pager number of props
else if aField is "mobile number" then
set aValue to mobile number of props
else if aField is "home email" then
set aValue to homeEmail
else if aField is "work email" then
set aValue to workEmail
else if aField is "other email" then
set aValue to otherEmail
else if aField is "office" then
set aValue to office of props
else if aField is "company" then
set aValue to company of props
else if aField is "job title" then
set aValue to job title of props
else if aField is "department" then
set aValue to department of props
else if aField is "assistant phone number" then
set aValue to assistant phone number of props
else if aField is "age" then
set aValue to age of props
else if aField is "anniversary" then
set aValue to anniversary of props
else if aField is "astrololgy sign" then
set aValue to astrology sign of props
else if aField is "birthday" then
set aValue to birthday of props
else if aField is "blood type" then
set aValue to blood type of props
else if aField is "desription" then
set aValue to description of props
else if aField is "home street address" then
set aValue to home street address of props
else if aField is "home city" then
set aValue to home city of props
else if aField is "home state" then
set aValue to home state of props
else if aField is "home country" then
set aValue to home country of props
else if aField is "home zip" then
set aValue to home zip of props
else if aField is "home web page" then
set aValue to home web page of props
else if aField is "business web page" then
set aValue to business web page of props
else if aField is "spouse" then
set aValue to spouse of props
else if aField is "interests" then
set aValue to interests of props
else if aField is "custom field one" then
set aValue to custom field one of props
else if aField is "custom field two" then
set aValue to custom field two of props
else if aField is "custom field three" then
set aValue to custom field three of props
else if aField is "custom field four" then
set aValue to custom field four of props
else if aField is "custom field five" then
set aValue to custom field five of props
else if aField is "custom field six" then
set aValue to custom field six of props
else if aField is "custom field seven" then
set aValue to custom field seven of props
else if aField is "custom field eight" then
set aValue to custom field eight of props
else if aField is "custom phone 1" then
set aValue to custom phone 1 of props
else if aField is "custom phone 2" then
set aValue to custom phone 2 of props
else if aField is "custom phone 3" then
set aValue to custom phone 3 of props
else if aField is "custom phone 4" then
set aValue to custom phone 4 of props
else if aField is "custom date field one" then
set aValue to custom date field one of props
else if aField is "custom date field two" then
set aValue to custom date field two of props
else if aField is "note" then
set aValue to plain text note of props
end if
if aValue is not false then
if length of csvLine > 0 then
set csvLine to csvLine & ","
end if
if (aValue as text) is not "missing value" then
set csvLine to csvLine & "\"" & aValue & "\""
end if
end if
end repeat
end tell
-- Change all embeded "new lines" to spaces. Does mess with the formatting
-- of notes on contacts, but it makes it cleans the file for more reliable
-- importing. This could be changed to an option later.
set csvLine to replace_text(csvLine, return, " ")
set csvLine to replace_text(csvLine, linefeed, " ")
return csvLine
end build_csv_line
-- replace_text()
-- Replace all occurances of searchString with replaceString in sourceStr
on replace_text(sourceStr, searchString, replaceString)
set searchStr to (searchString as text)
set replaceStr to (replaceString as text)
set sourceStr to (sourceStr as text)
set saveDelims to AppleScript's text item delimiters
set AppleScript's text item delimiters to (searchString)
set theList to (every text item of sourceStr)
set AppleScript's text item delimiters to (replaceString)
set theString to theList as string
set AppleScript's text item delimiters to saveDelims
return theString
end replace_textThank You, but this is a gong show. Why is something that is so important to us all so very, very difficult to do?
-
Transfer emails from outlook 2011 for mac to Outlook 2010 for windows
Hi,
I want to transfer emails from outlook 2011 for mac to outlook 2010 for windows.
Outlook 2011 exports mails only in olm format and there is no option to import olm files in outlook 2010.
I can drag and drop emails from outlook 2011 to a finder folder which saves emails as eml files. How can import eml files into outlook 2010.
Please helpHi,
Thank you for using
Microsoft Office for IT Professionals Forums.
Base on the research ,
We can try the steps below to add the registry sub key. This will open all .eml files that are in the file system using Outlook, including *.eml attachments on messages in OE/WLM. Any replies will be sent
using Outlook.
===========
Important This section, method, or task contains steps that tell you how to modify the
registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem
occurs.
1.Type
regedit in the Search field on the Start menu or press
Windows Key+ R and enter it in the Run command.
2.Navigate to
HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Microsoft Internet Mail Message WLMail\shell\open\command
Or HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Microsoft Internet Mail Message\shell\open\command
3. Change the command line (here its "C:\Program Files (x86)\Windows Live\Mail\wlmail.exe" /eml:%1)
to the following line, exactly as shown below but correcting the path to Outlook.exe to match the path on your computer.
"C:\Program Files\Microsoft Office\Office14\OUTLOOK.EXE" /eml "%1"
Thanks for your understanding.
Sincerely
Rex Zhang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
Every time that I try to print a page from the internet, My Mac (Maverick 10.9.4) crashes and I see a "Crash Reporter" icon. Any suggestions?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful. -
Screen refresh after the "Java for Mac OS X 10.6 Update 16"
Hi, can anyone help.. aside from going back to backup pre update 16, on tuesday installed updated the "Java for Mac OS X 10.6 Update 16" (from 15) and now Vassal (from vassal.org), using the newly installed JAVA SE 1.6.0_51, has some kind of bug stopping screen refresh and some GUI elements not being displayed in the app.
Is anyone else experiencing this problem ? Do we know if this is a known issue ? And if so, do we have any news about a fix ? and if so, from who ?
many thanks, RickySome searching found this:
http://stackoverflow.com/questions/17204465/how-does-java-for-os-x-2013-004-affe ct-break-swing-applications
i.e. looks like other folks are seeing the same problem in java Swing apps. I still wonder where a fix will come from.. the app developers, or a java patch ....(?). -
I have photoshop elements 10 for PC is possible to convert the license for MAC?
I have photoshop elements 10 for PC is possible to convert the license for MAC?
Good evening I do not have disc version, I by in Internet and attached I send the license number can I use?
I have downloaded the version 10 but when I insert the license number the program say that is wrong.
May I resolve the problem??
byby
Thanks
Leandro Duranti
[email protected]
Il giorno 08/feb/2015, alle ore 01:15, Barbara B. <[email protected]> ha scritto:
I have photoshop elements 10 for PC is possible to convert the license for MAC?
created by Barbara B. <https://forums.adobe.com/people/Barbara+B.> in Photoshop Elements - View the full discussion <https://forums.adobe.com/message/7173380#7173380>
That depends. If you bought the disc version, you're good to go, since your serial number works on both platforms, so just install the mac version. If you lost the discs or your mac doesn't have a disc drive, you can download it here:
Download Photoshop Elements products | 13, 12, 11, 10 <https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html>
However, if you bought the windows version as a download, you're out of luck. Adobe does do a crossgrade, but for older versions you have to pay to upgrade to current version on the new platform, and that's more expensive than just buying it, if you search around for a good price.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7173380#7173380 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7173380#7173380
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop Elements by email <mailto:[email protected]ware.com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 47>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>. -
Welcome to the Kanaka for Mac Forum
Welcome to the Kanaka for Mac forum. See the press release:
http://www.novell.com/news/press/201...available.html
Thanks for adding your experiences, knowledge, and questions here in the
forums.On 19/01/2012 18:00, Novell wrote:
> Welcome to the Kanaka for Mac forum. See the press release:
>
> http://www.novell.com/news/press/201...available.html
"Novell Kanaka for Mac is available to Open Enterprise Server customers
with a current maintenance license and can be downloaded through the
Novell Customer Center at http://www.novell.com/center."
To find your Kanaka download click My Products then Novell Open
Enterprise Server.
> Thanks for adding your experiences, knowledge, and questions here in the
> forums.
Documentation is available at http://www.novell.com/documentation/kanaka/
A video with an overview of the product is also available at
http://www.novell.com/communities/no...lient-solution
HTH.
Simon
Novell/SUSE/NetIQ Knowledge Partner
Do you work with Novell technologies at a university, college or school?
If so, your campus could benefit from joining the Novell Technology
Transfer Partner (TTP) program. See novell.com/ttp for more details. -
We have developed a desktop application using Flash software and published the same for MAC environment. When we double click on the index.app file, the application is working perfectly in Mac 10.6.7 at our office. But if the same index.app file is double clicked in Mac 10.6.7 at out clients location, its not opening. For your information the client is able to open this same application by double clicking on index.swf file. The main problem is that client is not able to open the application using index.app file at their office whereas we are able to do so at our office. Can anyone give some suggestions to sort this problem?
The most common reason is different versions of Flash, or different versions of web browsers used. Some users may elect to not have Flash installed at all because of the processor overhead of Flash. If you are going to make an application for a client, check what operating system and browser versions they are using first. Then determine if a stand alone application is required, or if they have the necessary plugins to run specific browser enhanced code.
P.S. MAC is an acronym for Media Access Control. Mac is the shorthand for Macintosh, the operating system and computers made by Apple Inc. -
I have Microsoft Word for Mac 2011, version 14.3.1. When I try to open a document, an error occurs, says file type is "blocked from opening in this version." This was NOT immediately after a version update. Any ideas? Thank you.
Take a look here:
http://support.microsoft.com/kb/953266
If that doesn't help, I'd suggest you take up the question in Microsoft's own forums or with Microsoft support.
Regards. -
"evdre encountered a problem retrieving data from the webserver"
Hi
We are using a big report which takes very long time to expand and sometimes we get the error message "evdre encountered a problem retrieving data from the webserver" when expanding the report, but not very often for most of our users. But we have one user who gets this error message almost every second time he expands the report. This user have a computer with same capacity as the rest of us, can there be some setting on the computer or in the client installtion the cause this problem?
We are using BPC 5.1 SP 5
/FredrikHi,
This error occurs usually if we have huge data in combination of our dimensions.
Even, if the selection of your memberset is not apt to the combination of the data present in the back end, you may encounter a data retrival error.
regards
sashank
Maybe you are looking for
-
MySQL Database Connection (two databases at the same time)
I have never had to open more than one MySQL database from within the same website before, but I do now. The website I have is designed where all the content comes from within the main database. I am building an Inventory system that I want within
-
Error message downloading OBIEE Report to Excel "is in a different format"
Dear experts: We just upgraded to 10.1.3.4.1 in our Dev environment and are seeing a pecuiliar behavior when we try to download a report to either "Excel" or "Excel 2000". After selecting Excel (or Excel 200) from the Download Link, we get the follow
-
Error when using navigation list
hi all; i'm using jdeveloper10.1.2 i created a jsp page which contain two cascading lists it worked fine,i copied the application to another pc when i try to run this page on jdeveloper i get this error at runtime javax.servlet.jsp.JspException: Fail
-
For those of you using godaddy and forwarding to .mac, how long did it take for the domain forwarding to take effect?
-
Code to determine which jobs are being run in the database
Hello I'm using Oracle 9 If it is possible I would like to write an SQL statement that determines what DBMS_JOB's are stored and being run in the database. Thanks Doug