Problem booting Windows 7 after memory upgrade

Hi,
I have A Satellite A505-S6015 laptop. I am trying to upgrade to 8 GB of memory.
I have purchased 2 KTT-S3BS/4G memory modules, each 4 GB. The memory modules are recommended by Toshiba.
When I try to boot to Windows it goes into a loop entering WIndows Error Recovery.
Is there a fix for this?
Thanks,
-Rich

Based on the detailed specs of your laptop, its ram is configured with 4GB DDR3 1066MHz and the ram that you had purchased is Kingston KTT-S3BS/4G 4GB Toshiba DDR3 PC3-10600 1333MHz Memory SODIMM
the clock speed is more higher that your system can handle
I do suggest to go for PC3-8500 DDR3-1066Mhz 4GB with part number PA3677U-1M4G
Cheers

Similar Messages

Slow boot up after memory upgrade

I have been having this issue for some time now, and I was hoping some one could help me in the right direction. I just recently upgraded the RAM module in my MBPro, from 2GB to 4GB (I was hoping this would make my MBP to boot up faster than when I had 2GB), now it takes at least 40 - 45 seconds to boot up, as before with 2GB it booted up pretty fast. Things I have done to resolve or troubleshoot this issue at hand -
Removed items from login items from under "Accounts".
Performed a clear cache of various applications.
Cleared some documents and emptied some more space(I don't know how this helps).
Also did a PRAM reset during boot up.
All of the above have not fixed my issue, and I am looking for more suggestions on how to fix the memory issue.
I have also done a lot of research, if anyone has any suggestions I would like to know.
Do post suggestions.
Nishi

Here is my MacBook Pro config -
Backlit Keyboard (English) / User's Guide
SuperDrive 8X (DVD±R DL/DVD±RW/CD-RW)
2GB 667MHz DDR2 SDRAM - 2x1GB
MacBook Pro 15-inch Widescreen Display
250GB Serial ATA Drive @ 5400 rpm
2.5GHz Intel Core 2 Duo
Also I bought my memory from Amazon, here is the memory -
Kingston Apple 4GB Kit 667MHz DDR2 SoDimm Dual Channel Memory
Why does not a MBP, boot faster isn't that what it is supposed to do. Moreover thats what some other MBP users have seen.
Do keep me posted.
Nishi

MacbookPro will not wake up from sleep after memory upgrade

I am restarting this topic as I have read thread after thread (many years old) and they all just die off with out any definite solution.
I have a 13" Mid 2010 Mac book Pro which originally came with 250gb HDD and 4gb memory
I have recently upgraded to a 256 SSD and a 1TB HDD optidrive replacement along with a 8GB memory upgrade and I am now running Lion 10.7.4
If I close the lid and open within approximately 1 minute it will wake up quickly as normal, if I leave it asleep for a minute or 2 it will not wake up with out holding the power button for several seconds and then I still need to wait a several seconds for it to respond and actually wake up. Sometimes I will need to completely shut down and restart. If I wanted a computer that takes forever to wake up I would have a PC!
The last thing I upgraded was the memory so I am sure it is the cause of the sleep problem and not the SSD conversion which was working fine with the original 4GB mem before upgrade.
I have read about resting the PRAM, resetting PMC as well as executing a line in the terminal, but all of these seem to have variable success. I have tried every thing but using the terminal to adjust the hibernate mode setting as I am not proficient with terminal and don't actually understand what changing this setting does (sudo pmset -a hibernatemode 7).
Has anyone resolved this sleep problem and what did you do? I would greatly appreciate some knowledgeable insight on the hibernation settings, and what running the line in the terminal is actually doing... even better what is the default so I can change it back if it doesn't resolve the problem.
A simple memory upgrade causing such a issues is very irritating.... Any help would be greatly appreciated!

But still, the sleep issue persists, so it is a more subtle timing issue. I upgraded my MBP with a Corsair 8GB kit ( http://www.corsair.com/us/corsair-mac-memory-8gb-ddr3-sodimm-memory-kit-cmsa8gx3 m2a1333c9.html ) and it indicated it had 9-9-9-24 CAS timing. It has worked flawlessly till now. Note that my Mac is a Late 2011, whose memory runs at 1333 MHz.
As far as I can tell, the 13" Mid 2010 models used 1067 MHz memory with 7-7-7-20 CAS timing: http://www.corsair.com/us/corsair-mac-memory-8gb-dual-channel-ddr3-sodimm-memory -kit-cmsa8gx3m2a106c7.html

Performance degrades in Probook 4540s after memory upgrade

Hello. I've installed recently in my Probook4540 two Kingston memory modules (2x8gb ddr3 1600 CL10 240 pin). Ever since I did this, Windows 8 takes much longer to boot and performance has significantly dropped. But, if I only place one of the two modules, or the original 4GB module, Windows runs at normal speed.
I think it's a BIOS problem, as I've just seen this very same error in other brand's laptops, for example here
http://superuser.com/questions/379970/laptop-is-incredibly-slow-after-ram-upgrade
I've got the latest available BIOS version installed (F31 26-SEP-2012).
Thank you.
This question was solved.
View Solution.

I actually started a case under their Business division. I first received the generic/automated response from HP saying that the laptop can only take 8GB of RAM max. They actually sent me a link to an official HP 4540s specs and it actually shows 8GB max. BUT, I never saw that PDF but used the one linked on their shopping site under business section and it shows maximum of 16GB of RAM. I explained all of this to a supervisor and they decided to escalate the issue to Level 2. I'm still waiting for a final decision. I'm worried they are going to try to replace the motherboard. I truly believe this is a BIOS update issue. Like I said the 4540s i3 we have can take the 16GB of RAM with no performance decrease. Only the i7 one is slowing down to a crawl. No error messages anywhere.

Problem booting Lion after restoring disk from Time Machine

I have a late 2009 iMac which I have upgraded to Lion, having created a bootcamp partition with Windows Server 2008 before upgrading.
This has been working absolutely fine for a few months but then there appeared to be some kind of hard disk problem and booting would only go as far as a gray screen with apple logo and a progress bar, then shut itself down. I started into the recovery partition by holding down the Alt key and from there (after reading around the internet a bit) was able to reformat the OS X partition and restore it from my Time Machine backup (wireless to Time Capsule).
However it now won't boot, initial grey screen with Apple logo and spinning progress meter then restarts into Recovery HD. In Recovery mode Disk Utility reports all appears to be OK with the disk - there were some errors before I restored from Time Machine, but Disk Utility was able to repair them.
If I hold down Alt on booting I get the 'choice of boot disks' screen with EFi boot, Windows and Recovery HD. If I choose EFi boot I get the Apple symbol alternating with a circle with diagonal line (prohibitory?) a couple of times, then it boots into Recovery. If I boot the computer with the Shift key it successfully boots into Windows, but won't boot into Windows from the 'choice of boot disks' screen.
Is my problem that I need to somehow 'make' the restored partition bootable and if so how, or is there a more fundamental problem here, either with my hard disk or (gulp) with my Time Machine backup?
Any ideas much appreciated, thanks
-Chris

Can't see SMART status anywhere in Disk Utility, shouldn't it just be visible at the bottom of the window when I click on the disk? Verify disk returns OK. I do have the correct format option.
I am now trying Tony T1's suggestion of trying again, but this time on Erase... I have chosen the Security Option that writes 0's over the whole partition to see if it throws up any signs of failure.
Thanks for your suggestions.

Mainstage 2: Apparent issues after memory upgrade

I'm wondering if upgrading from 4GB to 8 has caused some problems. After installing the proper memory upgrade (Crucial) I've had this result:
1. The increased memory shows up in 'About this Mac'. So far so good.
2. When I open a large Mainstage concert that used to show the RAM usage as very high, the RAM bar does not really look any shorter. This surprised me. I expected all sorts of headroom there that I'm not seeing. Disappointing.
3. This is the real problem: more often than not, when I go to save a concert, I get the horizontal progress bar... forever. It will simply not save. Eventually I force quit it, and end up with an autosave version. This is a real problem.
4. Another, lesser, new thing is that there have been occasional, sporadic display glitches. Sometimes a Patch name will be all scrambly, or I'll open an software instrument to edit and just get a white box in the shape of the window.
I guess my question is: although I'm indeed seeing 8GB RAM instead of 4, could there be an issue with the memory that might cause this? Any ideas as to how to troubleshoot this would be greatly appreciated.
Mainstage 2.1.3
OS 10.6.6
MacBook Pro 2 GHz Intel Core i7
8GB 1333MHz DDR3

That did it, thanks. I think I had read about that a while ago, and forgotten entirely. Everything seems to be as it should.
This is not the frst time you've helped me out, Blue. Thanks again.

Satellite A100 shuts down after memory upgrade

Consider me as 1 of the thickie bunch.. Not even sure wot im talkin bout but here goes n e way...........
Have a Satellite A100 570 ( PSAA2E)..........
Have tried several different online sites lookin for memory upgrade. Didn't have the witt to use toshiba site...... Ended up going with Crucial.........
Ran diagnostic on laptop and was sent the module a needed.or so i thought....... wrong 1 or 1s as i bought 2 x 1G modules in order to " double up".....
Got my money back as they were not compatable with my system.. something to do with density problems....
Tried company called OFFTEK........ they seemed to know what they were talkin about....... I have from Offtek. at present a..........
200 Pin 1.8v DDR2 PC2-4200 SoDimm....... but Toshiba have recommended below......
1GB PC2-4300 DDR2 Memory (533MHz)
Part Number: PA3411U-2M1G
1024MB (1GB) Memory PC2-4300 DDR2 (533MHz)
Theres an obvious difference ...... 4200 and 4300. But im not sure if its a significant difference........... or what it means
Have updated bios to most recent version and basically updated everything toshiba had to offer for this model...........
Ran EVEREST and it recognises the 1G module but when i take out the original 512mb module the laptop starts for about 3 seconds then shuts down...
this repeats about 5 times then complete shutdown.....
I dont like opening the back cover too often but this is the 3rd module ....
Not sure whats meant to happen if the module is working...i.e start up message..not sure if windows recognises 1G module....
Would it be safer bet to send Offtek module and stick with toshiba option.....
Thanks in advance.....

Cheers R2........ suppose at this stage i could start rhyming off a load of star wars lines but uve probably hears them all before.......
N e way......... checked out the link u posted..........very useful......
The module described is identical to what i have.............As with previous reply ( above ) im not sure what to do.........might take up Offteks offer of replacing the module but slightly concerned it might have same outcome......Still not happy bout opening the cover so much........nut needs must i suppose

2010 Mac Pro Boot Camp - Refuses to boot Windows after installing Boot Camp drivers

Hey all,
I have a quad 3.2Ghz 2010 Mac Pro with a Radeon 5870 and 8 GB RAM.
I have 2 10000RPM WD Raptor drives, the first drive is my Lion boot drive. The 4th bay contains the second Raptor which has Windows 7 Ultimate 64 bit installed. Bay 2 has Time Machine, bay 3 has a Windows backup drive.
I had first installed Windows and the Boot Camp drivers a few months ago and everything was humming along smoothly. Monday I tried to boot into Windows and it crashed immediately after the black Booting Windows screen started to change to the login window. This happened repeatedly. Nothing changed on the system that I am aware of. Whenever I tried to boot windows again, it booted into the repair mode. That did not seem to work because after running the repair it would still not boot.
So I did what is usually required of Windows, and that was to reinstall. I reformatted the hard drive, ran Boot Camp assistant, and started the install.
Everything was peachy so far, so I tried to reinstall the Boot Camp drivers (4.0). Did a reboot. Same problem. Doh!
So I did ANOTHER reinstall, and everything was fine. But this time I tried to install the Boot Camp drivers off the os install disc that came with my Mac (3.1). Still no go!
So finally I did my third reinstall and after that I did not install Boot Camp drivers. However, I did load up the CD and individually installed drivers for the Apple Mouse, Apple Keyboard, Cinema Display, etc. No problems whatsoever. Everything is actually still humming along fine.
So it looks like running the full Boot Camp install for some reason no longer works. Which means I am missing the Apple Boot Camp control panel, but that's not really a big deal. Althought it's quite annoying to not have the functionality of the special Mac keyboard keys like volume control, etc.
Has anyone run into this? I thought it might be a hardware problem but my Mac OS X OS exhibits no problems whatsoever.
Thanks!

Thank you to The hatter.
I have a Mac Pro mid 2010 with a SSD and several internal hard disks. For some time I was trying to install Windows 7 on a fresh boot camp volume on a new WD 7200rpm 1TB hard disk. It was taking hours to install, and then I had a series of failures to reboot that proved permanent. The Window Repair utility would come up and took forever to repair the volume - but failed to actually do so, requiring completion reinstallation of the bootcamp volume. This occurred three times, between 1 day and 2 months after installation. I had already moved the Windows drive in to drive slot 1 of the Mac Pro.
Eventually I gave up and installed boot camp on a secondary partition of the SSD. This worked fine, however is limited in capacity. So yesterday I thought I would try to install Windows on the hard disk again. The Windows installer took many hours to do its thing, and eventually a message came up that the installation had failed.
I took your tip about possible hard disk failure, and ran Techtool Pro surface scan. It turns out that there are lots of bad blocks being reported. According to Micromat's documentation, the bad blocks being reported are those that may be in critical areas of the disk that cannot be mapped out. They recommend low level reinitialisation (with zeros) to map out the bad blocks, if possible. I am now running Apple's Disk Utility to do this, and fingers crossed that this reinitialisation succeeds, or I will have to replace the drive.

[SOLVED] Low quality windows after kernel upgrading

Hello,
I've got such a weird situation. After I upgraded to 3.12-2, my KDE windows got a low quality style. You can figure out better what I mean with this screenshot.
I did try to reinstall the video driver (I'm using the integrated gpu currently), delete and recreate the KDE cache, and downgrade the kernel. But an even stranger thing is that although I downgraded the kernel, the system kept using the 3.12.2-2; I was able to use neither dhcpcd nor X too.
I strongly think it's an hardware compatibility problem, don't you?
Last edited by Grant (2013-12-07 12:23:46)

berbae wrote:
Grant wrote:I did try to re-install the video driver, delete and recreate the KDE cache, and downgrade the kernel.
It would have been better to post the exact commands you used and their result (what video driver? what KDE cache? what kernel? )
I strongly think it's an hardware compatibility problem, don't you?
How could that prevent you from downgrading the kernel?
So you say that you downgraded the kernel, to 3.12.1-3 I presume, you rebooted and the machine still uses the 3.12.2-1 kernel!
It's very strange : did the downgrading finished normally? Look into the pacman.log file and the kernel log messages in dmesg; and the xorg server log also, if possible with the new kernel and with the previous one. There is also the .xsession-errors file in $HOME.
I know it's strange! I've never come across a similiar problem. And I'm gonna tell you more: it kept doing that even when the *.3-1 came out. I had to use the brute force. I manually removed the kernel images, the packages in the cache, and upgraded with --force, all that in live mode, and it worked fine.

Kate always open files in a new window after kde upgrade

kate always open files in a new window, instead of the existing window as a new document after kde upgrade to 3.5. someone else have the same experience and have a solution for that ?
cheers,
notz

The problem is solved!
Apparently the Content Disposition: Attachment in the BLOB Download Format Mask does the trick.
For some reason I have to logout and login again in the application to see the change.
I tried changing the Content Disposition to Inline and then back to Attachment, and the file keeps opening in the same window unless I start a new session.
Is there any explanation why it is working that way?
Thanks!
Erick

Problems booting up after update of xp pro

Was getting this problem with updating the 4 previous critical updates for
win xp before service pack 2 and now getting it again with sp2.
Here is the problem (before xp2) windows does not boot up after 24 hours of
installing previous 4 critical updates, seems to get stuck whilst loading in
the keyboard and cant load in mouse driver, hence no boot up. However boots
in safe mode. found that if i deleted keyboard and started up again normally
it booted. it would do this infrequently. sorted it by uninstalling 4 updates. Cant remember the 'kb' number of the dates but 1 was for ie6, 1 was for BITS,1 was a general fix for xp and the last one was for v5 win update.
Now i find i have the same problems as well as slow loading times for xp to
boot up, sometimes as long as 2 minutes. Bought a new keyboard in case old
one was ghoosed, fixed it sort of now it only does on every 2nd boots. have
to manually restart machine and tell it to load windfows normally, had to install the 4 previous security updates mentioned in above paragraph before sp 2. im guessing one of these is interfering with keyboard in some way. any help would be greatly apprciated. Have updated motherboard drivers but not the bios. Have since discovered it is the agp driver that seems not to be loading and gets stuck in an endless loop

The four updates where as follows:
KB839645
KB841873
KB840315
KB842773
One was an update for BITS, one was an ie6/outllook express update, one was xp security update and one was v5 update ( to replace v4). Was getting the odd blue screen crash and slow load times but have fixed these, caused by services such as BITS, Workstation etc running when not needed.
Yeah the 9800 pro is not sharing power with anything
The fix for it just now (when xp doesnt load)is to manually hit the reset button, boot into safe mode. shut down again and wait 20 seconds and reboot, if that doesnt work do it again boot in safe mode and delete keyboard restart and boots up. though with old keyboard sometimes had to do this a few times. thats why though my keyboard was faulty.
Am now begining to suspect mobo is faulty, which i really hope is not the case as that'll be another faulty MSI part within 6 months.

Problem with Java after System Upgrade to 10.5.7

Hi,
I am facing problem with Java after having run Software upgrades.
Here is the whole story. I recently moved to iMac 10.5.6 from PowerPc 10.4. On this new machine I was having problem running a 3rd party application, which requires JVM. As this application worked well on Tiger, I decided to upgrade JVM on my iMAC using Software Upgrade(was I insane!!). As I like my systems to be updated (as with linux on my personal machine) I clicked "install all". As a result I have the following upgrades run on my machine:
2009-05-20 13:12:01 +0200: Installed "Mac OS X Update Combined" (10.5.7)
2009-05-20 13:12:10 +0200: Installed "Remote Desktop Client Update" (3.2.2)
2009-05-20 13:12:26 +0200: Installed "Java For Mac OS X 10.5 Update 2" (1.0)
2009-05-20 13:58:36 +0200: Installed "Java for Mac OS X 10.5 Update 3" (1.0)
2009-05-20 13:58:44 +0200: Installed "AirPort Utility Software Update 2009-001" (5.4.1)
2009-05-20 13:59:07 +0200: Installed "QuickTime" (7.6)
2009-05-20 13:59:22 +0200: Installed "iPhoto Update" (7.1.5)
2009-05-20 13:59:28 +0200: Installed "iLife Support" (9.0.2)
2009-05-20 13:59:38 +0200: Installed "iDVD Update" (7.0.3)
2009-05-20 13:59:58 +0200: Installed "iTunes" (8.1.1)
But now, simply running $ java on the prompt hangs, i.e. it takes no action.
$ which java
/usr/bin/java
$ ls -ltr /usr/bin/java
May 20 15:09 /usr/bin/java -> /System/Library/Frameworks/JavaVM.framework/Versions/Current/Commands/java
$java (no response)
Here is the output of $ top
PID COMMAND %CPU TIME #TH #PRTS #MREGS RPRVT RSHRD RSIZE VSIZE
703 java 98.8% 0:38.54 3 110 72 480K 184K 1964K 40M
Any clues?
cheers

Hi man,
In the wake of this java problem I resorted to keep working on my old machine, and today in my spare time I tried to fix this new machine.
So I execute $java on prompt, and then try to check the files it has opened, using lsof -p pid
I see it referring to
/System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Home/bin/java
isn't this usually the JAVA_HOME
However, executing $/System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Home/bin/java
hangs!!
but
$/System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/bin/java
works!!
$ pwd
/System/Library/Frameworks/JavaVM.framework/Versions/1.6/Home/bin
$ ./java -version
java version "1.6.0_07"
Java(TM) SE Runtime Environment (build 1.6.0_07-b06-153)
Java HotSpot(TM) 64-Bit Server VM (build 1.6.0_07-b06-57, mixed mode)
So, I changed the links as follows
borgraf:Versions raveesh$ l
total 72
drwxr-xr-x 3 root wheel 102 Mar 6 2008 1.3.1
lrwxr-xr-x 1 root wheel 3 May 21 19:42 1.4.1 -> 1.4
drwxr-xr-x 8 root wheel 272 May 21 19:42 1.6.0
lrwxr-xr-x 1 root wheel 3 May 21 19:44 OldCurrentJDK -> 1.5
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.4 -> 1.4.2
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.3 -> 1.3.1
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.5 -> 1.5.0
drwxr-xr-x 8 root wheel 272 May 21 19:44 1.4.2
drwxr-xr-x 8 root wheel 272 May 21 19:44 1.5.0
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.6 -> 1.6.0
lrwxr-xr-x 1 root wheel 1 May 21 19:44 OldCurrent -> A
drwxr-xr-x 8 root wheel 272 May 21 19:44 A
lrwxr-xr-x 1 root wheel 3 Jun 4 17:14 CurrentJDK -> 1.6
lrwxr-xr-x 1 root wheel 3 Jun 4 17:21 Current -> 1.6
Linking my Current and CurrentJDK to 1.6 and it works!
However, shall that be the reason!
what is in your /Versions/Current/
I got the following
$ ls /System/Library/Frameworks/JavaVM.framework/Versions/Current
CodeResources Frameworks JavaVM
Commands Headers Resources
There is no /Home in here, which is usually the case for /1.5 or /1.6
Anyways, things seems to work for the moment. Lets see if I get problem with using Java.
thanks

Macbook Pro won't boot OSX after Yosemite upgrade 10.10.3

I downloaded the update to 10.10.3 this morning before driving my daughter to daycare. When I came back, my Macbook Pro had rebooted into Windows 7 (Boot Camp). I restarted it by telling it to reboot to OSX, but it boots Windows again. If I turn it off completely, and then turn it on again, there's no chime... just a black screen for about 30 seconds, followed by "Starting Windows". I'm about to reboot to try resetting NVRAM and SMC, but I don't know if that's going to work without the chime...
I really need OSX to get going, so any help appreciated.

If you don't already have a current backup, back up all data, then reinstall the OS.* You don't need to erase the startup volume, and you won't need the backup unless something goes wrong. If the system was upgraded from an older version of OS X, you may need the Apple ID and password you used.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it. The same goes for Xcode. All other data will be preserved.
*The linked support article refers to OS X 10.10 ("Yosemite"), but the procedure is the same for OS X 10.7 ("Lion") and later.

Dual 867 MDD won't sleep after memory upgrade

Since yesterday my PowerMac G4 Dual 867 MDD has become insomniac. What changed since yesterday is that I installed an additional 512MB of RAM. So far as memory is concerned, there's the factory-installed 512 Infineon module; a second 512MB Kingston module (installed about a couple of years ago, and has been working fine ever since); and a third 512MB Kingston module (the one I installed yesterday) for a total of 1.5GB.
I am aware that sleeping issues can arise for all sorts of reasons (inc. USB peripherals) but it is pretty obvious that in my case the problem is caused by the memory upgrade.
The symptoms: Once I click Sleep on the Apple menu, I can hear the sound of the hard disks spinning down, but the rest of the box remains fully powered. The screen freezes and the computer has to be manually switched off, as the mouse cursor disappears from the screen and the keyboard becomes completely unresponsive.
So far I have tried the following: I have reset the PRAM (no luck there), and have tried switching memory modules to different sockets (basically, the single remaining free slot). I apologise in advance if that second troubleshooting routine might portray me as an ignoramus; I have a good understanding of things but cannot claim to be an expert.
I am a extremely frequent user of the sleep mode, and this issue has taken away from me all the pleasure that comes with a coveted (and long overdue) memory upgrade. I would deeply appreciate any help in resolving this.
Many thanks

Dear Dave,
Many thanks for your prompt response. I ran Rember (Amount of memory to test: "All". All other boxes unchecked - I was running other apps at the time). I cannot understand the results from the log, but I didn't get any feedback at the end of the testing. I attach the contents of the log below:
Memtest version 4.13 (32-bit)
Copyright (C) 2004 Charles Cazabon
Copyright (C) 2004, 2005 Tony Scaminaci (Macintosh port)
Licensed under the GNU General Public License version 2 only
MacOS X (Darwin) running in multiuser mode
POSIX version 200112
Pagesize is 4096
Requested memory: 18MB (19693568 bytes)
Available memory: 18MB (19693568 bytes)
Allocated memory: 18MB (19693568 bytes) at local address 0x02008000
Attempting memory lock... locked successfully
Creating test buffers...
Buffer A: 9MB (9846784 bytes) at local address 0x02008000
Buffer B: 9MB (9846784 bytes) at local address 0x0296c000
Running 1 test sequence...
Test sequence 1 of 1:
Stuck Address : ok
Random Value : \ ok
Compare XOR : ok
Compare SUB : ok
Compare MUL : ok
Compare DIV : ok
Compare OR : ok
Compare AND : ok
Sequential Increment: ok
Solid Bits : setting 1 of 64ok
Block Sequential : setting 1 of 256testing 224 of 256setting 225 of 256testing 225 of 256setting 226 of 256testing 226 of 256setting 227 of 256testing 227 of 256setting 228 of 256testing 228 of 256setting 229 of 256testing 229 of 256setting 230 of 256testing 230 of 256setting 231 of 256g 238 of 256setting 239 of 256testing 239 of 256setting 240 of 256testing 240 of 256setting 241 of 256testing 241 of 256setting 242 of 256testing 242 of 256setting 243 of 256testing 243 of 256setting 244 of 256testing 244 of 256setting 245 of 256testing 245 of 256setting 246 of 256testing 246 of 256setting 247 of 256testing 247 of 256setting 248 of 256testing 248 of 256setting 249 of 256testing 249 of 256setting 250 of 256ok
Checkerboard : setting 1 of 64ok
Bit Spread : ok
Bit Flip : setting 1 of 256ok
Walking Ones : setting 1 of 64ok
Walking Zeroes : setting 1 of 64All tests passed.
Thanks again,
Alex

Problems with games after leopard upgrade

After i upgraded to leopard iv been having trouble with some games (like bf 2142), they wont open, as soon as i click on the game it quits right away, anyone having this problem too? or anyone have any solutions??
:?

Good morning Mogens Pedersen
Thanks for using our forum
I am a Cisco network support engineer, I have a recommendation, before you upgrade any device in the future. Always keep in mind to make a backup of your data, in this way if you have to reset the device to factory settings you will not lose that information. Having said that, reset the router to the fabric configuration using the back little button, remember when you do that, you are going to loose your current configuration.
Also here I leave a link for you to download the firmware rescue utility for your router:
http://www.cisco.com/cisco/software/release.html?mdfid=282414010&release=4.0.0.7&relind=AVAILABLE&softwareid=282465800&rellifecycle=&reltype=latest
I hope you find this answer useful, if it was satisfactory for you, please mark the question as Answered
and please rate helpful posts
Greetings,
Johnnatan Rodriguez Miranda.
Cisco network support engineer

Problems with rv042g after software upgrade

after software upgrade it reboot the router about every 45 sec
I've tried this tool from the Cisco website RV0xxV3_FirmwareRescueUtility_v4.0.0.7 without success, the problem is there, is a way you can get the router up and running again ?
Can i run a TFTP server and upload a new software, or i ther a FirmwareRescueUtility for rv042g ??
Mogens from Demmark

Good morning Mogens Pedersen
Thanks for using our forum
I am a Cisco network support engineer, I have a recommendation, before you upgrade any device in the future. Always keep in mind to make a backup of your data, in this way if you have to reset the device to factory settings you will not lose that information. Having said that, reset the router to the fabric configuration using the back little button, remember when you do that, you are going to loose your current configuration.
Also here I leave a link for you to download the firmware rescue utility for your router:
http://www.cisco.com/cisco/software/release.html?mdfid=282414010&release=4.0.0.7&relind=AVAILABLE&softwareid=282465800&rellifecycle=&reltype=latest
I hope you find this answer useful, if it was satisfactory for you, please mark the question as Answered
and please rate helpful posts
Greetings,
Johnnatan Rodriguez Miranda.
Cisco network support engineer

Problem booting Windows 7 after memory upgrade

Similar Messages

Maybe you are looking for