Problem BPC user

Hello:
I have installed a BW with sap netweaver 7.0 EHP1. Then the BPC addon
to SP5.
On a windows machine we have the BPC server 7.
Making the servermanager diagnostic with BPC it gives a problem with
the user. it sais:
-current user name does not have permissions for administrators group.
The client works. But when we try to make a copy of the apshell
application, it Begins but end with an error.
We can see a dump in the st22 of de BW. The dump sais:
-Exception condition "X_MESSAGE" raised
The program is: UJS_ACTIVATE_CONTENT.
The windows installation was with a domain user "aytoval.es\ieci". The
BW is not in the same domain. is this the problem??
I have give permissions to the user with the bpc
client, to the user as sais the note 1420399 and it continue with the same error.
Please can anybody help me?
Thanks

Hi,
To see the server diagnostic you need to use the ID which is used to install the BPC.
And process the whole AppSet once before copying it and dont make any changes in the ApSHELL.
If its is different domain yu can contact your network administrator and find out whether the domains are compatible. If its compatible then you can use them.
Regards
Raman

Similar Messages

Looking for BPC user contacts with large numbers of dimension members

I would like to make contact with other BPC users that have multiple dimensions with dimension members in excess of 10K.
Thanks,
Cary Schulz
Newfield Exploration
281-674-2004

Hi Helene,
With 3,000 members you should not be experiencing these problems, if your report is designed properly.
I'm running BPC 5.1 SP8 on SQL 2005, with a dimension containing 22,000 members. Client PC's are typical (XP, Excel 2007, 1 or 2 gig RAM).
Using EVDRE and this dimension expanding on the rows, most reports & input schedules can expand & refresh in the range of 10 to 30 seconds.
The faster times are when I use a row expansion memberset using dimension properties, such as Active="X". The slower times are when the memberset is hierarchy-based, such as BAS.
If you're using a dynamic template (one using EVEXP for the expansion) then you should start over using EVDRE. It will be much faster, particularly if you optimize your row expansion.
It's often a good idea to add dimension properties specifically for the purpose of optimizing the report expansion, if the dimension has thousands of members. I sometimes go as far as to add properties which mimic the hierarchy (MyLevel2, MyLevel3, etc) just for this purpose.

Video on skype not workin only in facetime and photo booth appears to be a common problem amongst user with a recently bought macbook air

Video on skype not working. Only functioning in facetime and photo booth. Seems to be a common problem amongst users having bought a new macbook air recently. When you go to Preference and click on audio/video item video works but when clicking on another menue and returning to audio/videio picture is gone. Understand has something to do with a recent update von Apple (10.8.5... missing file for 32 bit version).
Anybody there to give me an advice?
Thanks.

Wait until a fix is available from Apple or Skype.
Best.

Problem with user-defined functions in XQuery String

hello
i've a problem with user-defined functions in XQuery String
details are here (the code is not Human-readable via forum's embedded editor ?? strange)
http://docs.google.com/Doc?id=ddqwddsr_21c96d9x
thanks !!

See
michaels> select xmlquery('declare function local:test_function($namecmp as xs:string?, $inputtype as xs:string?) as xs:string?
                    return {$inputtype}
                 local:test_function("1","2")' returning content) o from dual
Error at line 5
ORA-19114: error during parsing the XQuery expression:
LPX-00801: XQuery syntax error at '{'
3                       return {$inputtype}
-                              ^
michaels> select xmlquery('declare function local:test_function($namecmp as xs:string?, $inputtype as xs:string?) as xs:string?
                    $inputtype
                 local:test_function("1","2")' returning content) o from dual
O
2
1 row selected.

Problem with users disabling ARD client service

I've got a problem and i'm not quite sure of the work around. I'm a PC guy by nature and can't quite figure this out.
I'm having a problem with users disabling the ARD service from the sharing menu. Unfortunately users need to have admin privleges to do their work so I can't simply give them a standard account.
I've hidden the ARD user account i created from the login window through Netinfo, but I need to find a way to stop users from shutting the ard service down.
They don't seem to understand that the company requires that it be on the computer. Now, I'm the one who is set as the admin for ARD in the building, however we really just use it to rollout drivers, install packages, and its a lifesaver for remotely fixing problems with programs. The company didn't really buy it to spy on the employee's.
Is there any way to hide the service from an admin level account? Or keep them from shutting it down?
BTW, this would have to be done on multiple machines running both panther and tiger.
Any help would be appreciated as I'm not quite sure where to start.

First, as a matter of policy, let them know this service is active, and needs to remain active. If they disobey this instruction and turn it off, you have a human resources issue, not a technical issue.
Second, there are very few enterprise users that need admin access to their machines. Oh, they ALL think they do, and there will be howling when non-admin status is first imposed, but we have 350 users in a publishing environment with less that 20 setup as admins. Those users are almost all superusers who assist others in a technical role.
We have far fewer software problems like this and with ARD, IT can install/ authorize installation of software remotely should a user need that. It simply does not dramatically impact our users to have non-admin access. On the other hand, we recognize that a FEW users will need more access, and grant that on a case-by-case basis.

Problems when user enter the field

I have problem when user enter the field, but it cannot retrieve from the table. Below is my program, help me to check is it correct or not, THANKS
<input type="text" name="po_num<%=i%>" style="width:100%;text-align:left;" onChnage="chkPOexist(<%=i%>)">
Function chkPOexist(i){
if documen.all.po_num.value == null {
alert ("PO cannot be null");
else {
po_num = new String;
po_num = eval(document.po_num[i].value)
alert(po_num);
<% System.out.println("PP " +po_num);
sql_query = "SELECT po_num"+
" FROM pomast"+
" WHERE po_num '"+po_num+"' ";
                    try{
                    rset = db.execSQL(sql_query);
                    catch(SQLException e) {
                    System.err.println("Error in query");
                    while(rset.next()== true){
po_num = rset.getString("po_num");
%>
</select value="<%=po_num%>"><%=po_num%></select>
                    <%}%>

You seem to have some confusion between java and javascript, and when they run.
Java code runs only on the server, and produces an HTML page.
Javascript code runs on the client.
The two can not communicate. Specific to your example you seem to think that the java code will be executed by your onChange event.
This is not the case.
In order to run java code again you have make a request by submitting the form, or clicking on a link.
Cheers,
evnafets

Problem deleting users with delegated admin

Hello,
I seem to be having a problem deleting users with delegated administrator. I am using JES 2005Q4.
Here is what I do:
I set Inetuserstatus and mailuserstatus to deleted. Then run msuserpurge to delete the mail box. This seems to be working fine. Then I do a commadmin domain purge and it will actually delete the persons ldap record, but it does not delete the o=pab records or the o=PIserverDB records.
I am probably missing a step here, and would apprecidate it somebody could point me in the right direction.
Thanks,
Gary

DA patches:
119777-10 most current release for Solaris
119778 for X86
119779 for Linux
118540-23 Communication Express Solaris Sparc
118541 X86
118542 Linux
118207-42 Messaging core Solaris sparc
118208 X86
118209 Linux
116574-02 Veritas Vcsha (sparc only)
118242-03 and 118245-03 Dssetup sparc
118243 and 118246 X86
118247 Linux
122018-02 Outlook Connector
(all the currently released patches. Most have t-patches available from tech support post the above numbers)

Burning problems as user

Hi
I am using a Toshiba Satellite with WinXP SP2.
having had no problems with iTunes 6 I installed iTunes 7.
Problem: as user I cannot burn CDs while this is possible as an administrator.
Any solution to this problem?

I have the same problem. Really annoying
Error message: Disc Burner or software not found.
This occurs if I try to burn an Audio-CD or backup my music files.
Following the result of running CD-Diagnostics:
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
IBM 2373WVD
iTunes 7.0.1.8
CD Driver 2.0.6.0
CD Driver DLL 2.0.6.0
LowerFilters: PxHelp20 (2.0.0.0), DRVMCDB (1.0.0.1), ElbyDelay (5.1.0.0), DLACDBHM (1.0.0.1),
UpperFilters: GEARAspiWDM (2.0.6.0),
Video Driver: ATI MOBILITY RADEON 7500 \ATI MOBILITY RADEON 7500
IDE\DiskFUJITSUMHT2030AT_______________________849B___
Could not open CD handler, 5. Problem with installation of drive in Windows or drive contains copy protected CD.
USBSTOR\DiskWDC____WD800BB-00FJA0_13.0
Could not open CD handler, 5. Problem with installation of drive in Windows or drive contains copy protected CD.
IDE\CdRomHL-DT-STRW/DVD_GCC-4242N_______________0201___, Bus Type ATA, Bus Address [0,0]
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is not an administrator.
Failed while scanning for CD / DVD drives, error 2510.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.
E: Unsupported CD or DVD drive.
Virtual drives can sometimes interfere with reading and writing CDs in iTunes. If this is a virtual drive and you are having problems with other drives, try uninstalling the virtual CD application.

Adobe aftereffects is not working on os x maverics all updates...... is dis soft. will work on the new os x yosemite.?? y apple is nt working on dis problem wen users are facing problems with new os x .....

Adobe aftereffects is not working on os x maverics all updates...... is dis soft. will work on the new os x yosemite.?? y apple is nt working on dis problem wen users are facing problems with new os x .....

I suggest you contact Adobe tech support or their Mac forums for assistance.

How to add BPC users in the batch?

I would like to add BPC users in the batch.
Does anyone know how to achieve this on BPC 7.0 MS?
I think it is almost impossible to add thousand of BPC users without errors via BPC Admin Console.

Hi,
The solution proposed by Sakthi will work if you want to give to all this account the same level of security.
Once you're in the "Add User", the AD filter will show all accounts. Just select all of them and choose team / task profile .. etc in next screens.
Maybe you could create seperate domain group like BPC Admins, BPC Users.. and so on. And create customized filter for each of them. So when you add your users, just select the right AD filter and give to them the right set of security parameters.
Edited by: Sebastien Michel on Jun 19, 2009 3:01 PM

After Int Install OS10.5.8 on PowerPC G4 having major system problems (created user to verify) CS4 apps go non responsive

After Int Install OS10.5.8 on PowerPC G4 having major system problems (created user to verify) CS4 apps go non responsive

Ok no difference, I don't get any drive errors that seem significant or numerous, sometimes I don't get any at all, the disk always verifies and I haven't had to run a repair on it yet. I've gotton one or two drive errors, I'll save them next time I run either DU or DW.... however with permissions, there are a lot and they all fix (except: see below: Last 3: ACL errors are always there) but as I keep having to do force quits and system re boots they keep coming back; posted them below IDK if this will help you to help me, LOL... but figured it couldn't hurt, the ones below are re-occuring I know i've seen them b4. . . Don't know if this makes a difference but on initial install I had several font conflicts w/system fonts, I renamed suitcases and that error message hasn't come back . . . but do you think this could be a font issue . . . I have like 12,000 fonts of which a couple hundred are ususally always active . . . IDK it doesn't make sense to me it would be, but you never know... just a shot in the dark
I also saved my last PS crash report and it was like 100 Pages long, I've never seen one that long, I make a pdf of it and post link to my idisk, if its something that you can interpet.
Verify permissions for “Rayce”
          Reading permissions database.
          Reading the permissions database can take several minutes.
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr-x , they are drwxrwxr-x .
ACL found but not expected on "Applications/Utilities".
ACL found but not expected on "Applications".
ACL found but not expected on "Library".
Permissions verification complete
Repairing permissions for “Rayce”
          Reading permissions database.
          Reading the permissions database can take several minutes.
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/DVD.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSettings.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/FRSources.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Movies.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Music.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Photos.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/Podcasts.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Front Row.app/Contents/PlugIns/TV.frappliance/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/PrivateFrameworks/BackRow.framework/Versions/A/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "System/Library/CoreServices/Menu Extras/RemoteDesktop.menu/Contents/CodeResources", should be -rw-r--r-- , they are lrw-r--r-- .
Permissions differ on "Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/CodeResources", should be -rw-rw-r-- , they are lrw-rw-r-- .
Permissions differ on "private/var/spool/cups/cache/rss", should be drwxr-xr-x , they are drwxrwxr-x .
ACL found but not expected on "Applications/Utilities".
ACL found but not expected on "Applications".
ACL found but not expected on "Library".
Permissions repair complete

Can we map three BPC users with single domain user

Hi..
When we map the three BPC users in the ABAP server in the program UJA3_WRITE_SYS_USERS with domain user,can we map with only one domain user for all three BPC users or we have to use three different domain users to map the three BPC users?
Please do reply
Thanks
Bobby

yep
u can map three bpc user with single domain user.
but domain user must have management roles.

Problem with user mapping

Hello,
We got a problem with user-mapping to a SAP system.
We create a SAp system, and an alias to this system.
We add a user mapping for the administrator (user, not group). Check for connector is OK.
Now, we make the same user-mapping for a group.
if the user also belongs to the group "administrator" this mapping works, otherwise this fail with a message <b>"com.sapportals.portal.ivs.cg.SystemNotFoundException: Got null system object for alias R3HR".
</b>After checking, there is no user-mapping for the "administrator" group, nor for the roles that belong to that group, nor for the user.
So, it seem that the alias is only visible for an admin.
does any one got an idea ? we are on SP14, Linux.
regards
Guillaume PATRY

HI Guillaume,
The user mapping is available for both Admin as well as end users.
Open your system from System Administration>System Configuration>System Landscape.
In the property editor,in dropdown for property category,
select the logon method as UID?password and User Mapping type to admin/user.
Then you can create a Group,map the system alias for this group and add users to this group.
Also,in the property editor for the system,from dropdown for display,select permissions , and add the group to asssigned permissions as READ ONLY and select the checkbox for ENDUSER.
Hope,this resolves your problem.
Regards,
Siddhartha

BPC User Groups!!

Hi Expers !!
Am Verymuch new to SAP BPC .. I would like to join some BPC User Groups.
Can Any one Have BPC User Groups List/links Other Than the SDN (BPC) .
Thanks ;
-Upender.

thread close.

Problem migrating user account SID

Problem migrating user account SID
I’m trying to migrate user accounts SID from a Windows 2003 domain to a Windows 2008 domain using the command line admt.exe. There is a trust between the 2 domains and I’m able to migrate a user account using admt 3.1 wizard including SID. The wizard asks me for a user account in the source domain with administrative right for the SID migration. In the wizard I use the same credentials as my current session. This works fine!!
But, when I’m using the command line “admt user” in an administrative cmd box i’m not prompted for any credentials in the source domain. My current credentials have the proper right in the source domain so that should not be any problem but admt is not able to migrate the user SID and gives the following error:
ERR2:7615 SID History cannot be updated for xxxxx. You must be an administrator in the source domain
Any ideas ??

I to am seeing this error - running on a Target DC.
Command line: admt group /O: GroupOption2.txt /F: test.txt /TO:corporate/Groups
Option File:
[Migration]
SourceDomain=Source.com
TargetDomain=corp.target.com
PasswordOption=Copy
PasswordServer=blade3.source.com
ConflictOptions=MERGE
[User]
MigrateSIDs=Yes
[Group]
MigrateSIDs=Yes
UpdatePreviouslyMigratedObjects=Yes
FixGroupMembership=Yes
MigrateMembers=No
UpdateUserRights=YES
[Security]
TranslationOption=Add
Error from the logs:
2010-02-15 11:47:14 ERR2:7615 SID History cannot be updated for test group deleteme. You must be an administrator in the source domain.
The account I am logged in to the target DC is a member of the Administrators group on both domains and of the Domain Admins on the source.
Any ideas? Searching (with Bing and that other one) only turns up two relevant hits, this thread and a win2000 tech net article.
Extra info:
Source: Windows 2003 (OS) - Windows 2000 native functional levels (domain and forest)
Target: Windows 2008 (OS) - Windows 2003 functional
Sorry for the retarded formatting.

Problem BPC user

Similar Messages

Maybe you are looking for