Problem building DVD
As you can see, I am having a problem building a dvd. This is what happens when I use dynamic link from ppro to encore. If I try using dynamic link with a project that is only 20 seconds or so long, the timeline looks normal and encore will build a dvd like it is supposed to. When the project is longer, the timeline is pink. Both ppro and encore are cs5. I have tried everything I can think of. I uninstall everything and installed it again but no change. HELP!
This does not seem to be an Encore specific error message.
retroexpress.exe is the executable for Retrospect Express HD, a backup utility by Dantz Development corporation.
You might be a victim of this software's faulty behavior.
I think the first error message for the MsServerTrayapp error is also due to some hardware back up utility that you are running and that is conflicting with the communication of Encore with the burner and the burning media.
I would advise you to follow the following steps :
Rename the file C:\Windows\system32\mscoree.dll to mscoree_old.dll (This might work as a temporary workaround to make Encore access the burning media)
OR
2. Reinstall a newer version of Microsoft .NET.
OR
3. Try repairing the .NET framework : Obtain the original installation source. For example, if you installed the .NET Framework from CD or DVD, insert the disk. Or, if you downloaded the .NET Framework, download again and re-install or If you installed from a network share, reconnect.
Hope this helps you.
Thanks,
Ramesh.
Similar Messages
-
Encore CS5 freezes when building DVD
Hi!
Just spent lots of money on CS5 and got lots of problems. Cannot build DVD at all. Even 50 sec. HDV, DSLR or any kind. Encore becomes frozen after few min of transcoding.
dual xeon
Nvidia quadro 4800
12 gb ram
RAID 0 2 T plus multiple single drives.
Matrox mini, I have installed just the card but not the software since it is not working with CS5.
My previous versions of CS3 and CS4 worked fine. I would say that CS4 was much more stable.
Any comments?
Thank you in advance.
MichaelI may have had a breakthrough in that, after removing several media converter apps, I now seem to have dependable DVD production. I thrashed around and removed a few things before I checked again, but my suspicion is that ffmpeg might be the culprit, (but I don't have time to reinstall it to verify that notion now).
I'm happy if that fixes the problem, but still can't help but feel that it's a program flaw if its able to zone out so silently, without an error message, or even reporting that it's not responding, (but just perpetually idling). That was a frustrating and erie problem that I hope can a least be improved on to the point of crashing with some kind of diagnostic if not surmounting whatever the conflict is. So far, 4 DVDs without a hitch. Yea. -
Building DVD.....out of memory message!!!!!!
I am having a problem with building my DVD in Encore 2.0. I go to build DVD and it starts to transcode....after a short while, an out of memory window pops up. I had this happen before during my actual set up for the DVD. I guess there were too many menus open at once, but now that I am trying to build my DVD, it is doing it again. Am I doing something wrong? I have 3GB of RAM so I know that is not the problem.
Among other problems subtitles, etc, we had a lot of problems building on Encore dvd 2.0. The project kept crashing during building. We went through the entire Troubleshooting list of what to do when the system crases and it probably helped (especially clearing the start-up tray), but the project was still crashing. Through trial and error, and asking around, we discovered we shouldn't have backed-up our project (using the Save As feature) on the same drive. I'm not sure why. We were only doing that in the first place because we'd had so much trouble with the project. After we stopped backing up the project on the same drive, the building ceased to give us memory, errors and crashing problems.
I hope this helps! -
Encore freezes when building dvd
Hi
I've got a problem. When I click "build dvd" in adobe encore, the program should pop up a window where I can click to build to dvd, to folder etc.
Well the window pops up, but then the whole program freezes, en the mouse turns into a sand glass. I've tried to reinstall, but that didn't work.
can somebody help me?After spending the last 48 hours trying to get through the same type of issues I am ready to throw CS3 out the window. I have had about 6 different scenarios with problems and error messages. None of the messages are on the adobe website, in the manuals and can't even be found on Google. I will try to form a "Good Forum question" when my patience has returned and my blood pressure drop. But Mr. Smith - you try dealing with lock ups and reboots to just put together a one hour video with your new $2000 software package and keep calm and collected enough to gracefully ask a proper forum question! I feel their pain!
-
Problems with DVD Player 3.0.1 in G4/466
Problems with DVD Player in G4/466
Yes, I've a g4/466 with two disks. In the first there's system 9.2.2 and the DVD player goes perfect. In the second I've system 10.2 and the 9.2, and the DVD Player (3.0.1) on the system 10 begins to jump in the dock, but stop and nothing happens, I can't open it...
There's any way to reinstal it form system disks???
Or any download to check the error?
Thanks1. Try using Pacifist to extract it from your Mac OS X 10.2 installation disks, and then run the combo updater for your version of Mac OS X and any applicable DVD Player updates.
2. Open the Console application in the /Applications/Utilities/ folder and look for lines relating to the DVD Player.
(18543) -
Problems building a stand alone application with LV 8.6.1.
I'm having problems building a stand alone application with LV8.6.1. I'm using a USB- 6008 DAQ and USB-6501 Digital device in the application. I already have an simple executable on the machine so the Run time Engine is already installed. For the USB DAQ device, I assume I need to include the DAQmx8.8 as one of the installers. When I attempt to build the application, I'm prompted for several disk, one being a distribuition disk 1. I have the installation disk for the developer package. I did not see a distribuiton disk as one of the installation disks. When I insert disk 1 I get an error that another application is trying to run. Could someone tell me which installers I need to include and where do I find the "distributor" disk.
Thank you,are you building installer for the first time on this PC?...It usually asks for the drivers CDs and some toolkits if required.
you just need to use drivers CDs (comes with LabVIEW) from which you installed on this PC. If you have ever upgraded drivers, then you have to use the latest CDs only.......
another issue may be ...when u insert the driver disk, it has autorun, it will launch drivers installation wizard....close that and then try to build distribution.........
Message Edited by Anil Reddy on 09-25-2009 01:22 PM
Anil Punnam
CLD
LV 2012, TestStand 4.2.......... -
Error "Problem building schema" while invoking external webservice
Hi,
I have following problem:
I created 2 BPEL processes.
One of these processes should be called from the other as a partnerlink.
When I create the partnerlink, pointing to the deployed wsdl, I get following error "Problem building schema" when I try to access the input variable that was created by the invoke activity.
I have tried a lot of things but keep on getting this error.
When I create a new, empty BPEL process, and do exactly the same it does work!
any help would be greatly appreciated.....Hi,
I have given this URL 'http://ws.cdyne.com/WeatherWS/Weather.asmx?WSDL'.
Now it is showing the following error
Exception occured in library handler.Not implemented.
Exception of class CX_SIDL_INTERNAL_ERROR
Please have a look into it
Regards,
Dhana -
on windows 8 and itunes I have importing problems the DVD is only reading the music cd from 1.5x to 4.0x for 95% of the time, it does hit speeds of 30x for the other 5% of the time. Is it a driver issue with the DVD or is it a windows 8 issue?
No. You have no alternative but to plug it into a computer running iTunes and restore it.
-
I was having problems burning DVDs' from iDVD and it turned out my burner is at fault.
I have a 27 inch iMac using a OPTIARC DVD RW AD-5680H. Where can I buy a replacement in UK? I have seen these with SATA is this the correct cable for my mac?
I have also tried the Mac superdrive but my imac wont recognise it as it's been configured for macbook air and mini mac. I know I can "make" it work by doing something or other in com.apple/plist, but dont want to mess about in there.
I'm also told an external drive would work but does "mac compatible" mean only for air and mini as their own superdrive is or all macs?
Any help appreciated before I convince myself mac is no better than windows pc!Thanks but this didn't really help.
I can buy the drives at a dozen places but none of them seem to know what connection is correct (SATA etc) and that includes the apple store. It was the store who told me buy the superdrive and all my problems would be over. Wrong! It isn't recognised by imac as it's confifured for air and mini mac. Only way to make it work is as i said in earlier post. (Would you be happy buying a car you were told would start and then discover you have to open the bottome and fiddle to make it go?)
The apple store I would not even consider taking it to. Days without the pc, over priced and don't have a good reputation for actually fixing things!
But thanks -
"Problem building schema" exception in BPEL Designer
Hi all,
I use BPEL Designer 10.1.2.0.2 and encounter the following problem:
I built a web service based on the Oracle Toplink How To demo. The web service has one published method that returns a custom 'Customer' object.
I deployed the web service on my localhost (AS 10.1.3)
In my BPEL process, I create a partnerlink based on the WSDL that was generated by JDeveloper and let BPEL Designer create a local copy.
Then I created an invoke and had the wizard create in- and output variables for the invoke.
When I select either the input- or output variable in the structure pane, I get an error message when I click on the 'parameters' entry. The message shown is 'Exception - problem building schema!'
When I check the 'show detailed node information' box no additional info is shown!
Any Idea what might go wrong?
The WSDL looks as follows:
<definitions
name="updCustWS"
targetNamespace="http://examples.ox.model/"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://examples.ox.model/"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:tns0="http://examples.ox.model/types/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:tns1="http://www.oracle.com/webservices/internal/literal"
>
<types>
<schema xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="urn:customer-example" schemaLocation="Customer.xsd"/>
</schema>
<schema xmlns="http://www.w3.org/2001/XMLSchema" targetNamespace="http://examples.ox.model/types/"
elementFormDefault="qualified" xmlns:tns="http://examples.ox.model/types/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:soap11-enc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:ns1="http://www.oracle.com/webservices/internal/literal">
<import namespace="http://www.oracle.com/webservices/internal/literal"/>
<import namespace="urn:customer-example" schemaLocation="Customer.xsd"/>
<complexType name="getCust">
<sequence>
<element name="cust" type="tns:Customer" nillable="true"/>
</sequence>
</complexType>
<complexType name="Customer">
<sequence>
<element name="gender" type="string" nillable="true"/>
<element name="dateOfBirth" type="dateTime" nillable="true"/>
<element name="phoneNumbers" type="ns1:vector" nillable="true"/>
<element name="shippingAddress" type="tns:Address" nillable="true"/>
<element name="billingAddress" type="tns:Address" nillable="true"/>
<element name="firstName" type="string" nillable="true"/>
<element name="lastName" type="string" nillable="true"/>
</sequence>
</complexType>
<complexType name="Address">
<sequence>
<element name="postalCode" type="string" nillable="true"/>
<element name="suite" type="string" nillable="true"/>
<element name="street" type="string" nillable="true"/>
<element name="province" type="string" nillable="true"/>
<element name="city" type="string" nillable="true"/>
</sequence>
</complexType>
<complexType name="getCustResponse">
<sequence>
<element name="result" type="tns:Customer" nillable="true"/>
</sequence>
</complexType>
<complexType name="version">
<sequence/>
</complexType>
<complexType name="versionResponse">
<sequence>
<element name="result" type="string" nillable="true"/>
</sequence>
</complexType>
<element name="getCustElement" type="tns:getCust"/>
<element name="getCustResponseElement" type="tns:getCustResponse"/>
<element name="versionElement" type="tns:version"/>
<element name="versionResponseElement" type="tns:versionResponse"/>
</schema>
<schema xmlns="http://www.w3.org/2001/XMLSchema" targetNamespace="http://www.oracle.com/webservices/internal/literal"
elementFormDefault="qualified" xmlns:tns="http://www.oracle.com/webservices/internal/literal"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:soap11-enc="http://schemas.xmlsoap.org/soap/encoding/">
<import namespace="http://examples.ox.model/types/"/>
<import namespace="urn:customer-example" schemaLocation="Customer.xsd"/>
<complexType name="vector">
<complexContent>
<extension base="tns:list">
<sequence/>
</extension>
</complexContent>
</complexType>
<complexType name="list">
<complexContent>
<extension base="tns:collection">
<sequence/>
</extension>
</complexContent>
</complexType>
<complexType name="collection">
<sequence>
<element name="item" type="anyType" minOccurs="0" maxOccurs="unbounded"/>
</sequence>
</complexType>
</schema>
</types>
<message name="UpdCustWS_getCust">
<part name="parameters" element="tns0:getCustElement"/>
</message>
<message name="UpdCustWS_getCustResponse">
<part name="parameters" element="tns0:getCustResponseElement"/>
</message>
<message name="UpdCustWS_version">
<part name="parameters" element="tns0:versionElement"/>
</message>
<message name="UpdCustWS_versionResponse">
<part name="parameters" element="tns0:versionResponseElement"/>
</message>
<portType name="updCustWS">
<operation name="getCust">
<input message="tns:UpdCustWS_getCust"/>
<output message="tns:UpdCustWS_getCustResponse"/>
</operation>
<operation name="version">
<input message="tns:UpdCustWS_version"/>
<output message="tns:UpdCustWS_versionResponse"/>
</operation>
</portType>
<binding name="updCustWSSoapHttp" type="tns:updCustWS">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="getCust">
<soap:operation soapAction="http://examples.ox.model//getCust"/>
<input>
<soap:body use="literal" parts="parameters"/>
</input>
<output>
<soap:body use="literal" parts="parameters"/>
</output>
</operation>
<operation name="version">
<soap:operation soapAction="http://examples.ox.model//version"/>
<input>
<soap:body use="literal" parts="parameters"/>
</input>
<output>
<soap:body use="literal" parts="parameters"/>
</output>
</operation>
</binding>
<service name="updCustWS">
<port name="updCustWSSoapHttpPort" binding="tns:updCustWSSoapHttp">
<soap:address location="http://localhost:7780/toplinkDemo-toplink-context-root/updCustWSSoapHttpPort"/>
</port>
</service>
</definitions>
any help would be greatly appreciated!
Thanks in advance,
RobHi
I know it's an old thread, but I'm having the same issue.
I have created an EJB3 web service that returns an object with 2 nested objects. The autogenerated WSDL looks something like this:
<?xml version = '1.0' encoding = 'UTF-8'?>
<definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:tns0="http://www.oracle.com/webservices/internal/literal" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://smbc.crm.persistence.services/" name="CRMBusinessWSService" targetNamespace="http://smbc.crm.persistence.services/">
<types>
<schema xmlns="http://www.w3.org/2001/XMLSchema" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ns1="http://www.oracle.com/webservices/internal/literal" xmlns:soap11-enc="http://schemas.xmlsoap.org/soap/encoding/" targetNamespace="http://smbc.crm.persistence.services/" elementFormDefault="qualified">
<import namespace="http://www.oracle.com/webservices/internal/literal"/>
<complexType name="Businesses">
<sequence>
<element name="partyId" type="long" nillable="true"/>
<element name="businessContactPoints" type="ns1:list" nillable="true"/>
<element name="businessAddresses" type="ns1:list" nillable="true"/>
</sequence>
</complexType>
<complexType name="BusinessAddresses">
<sequence>
<element name="locality" type="string" nillable="true"/>
<element name="paon" type="string" nillable="true"/>
<element name="siteUseType" type="string" nillable="true"/>
<element name="locationId" type="long" nillable="true"/>
<element name="townName" type="string" nillable="true"/>
</sequence>
</complexType>
<complexType name="BusinessContactPoints">
<sequence>
<element name="telCountryCode" type="string" nillable="true"/>
<element name="partyId" type="long" nillable="true"/>
<element name="telAreaCode" type="string" nillable="true"/>
</sequence>
</complexType>
<element name="queryBusinessesFindByPartyId" type="tns:queryBusinessesFindByPartyId"/>
<complexType name="queryBusinessesFindByPartyId">
<sequence>
<element name="int_1" type="int"/>
</sequence>
</complexType>
<element name="queryBusinessesFindByPartyIdResponse" type="tns:queryBusinessesFindByPartyIdResponse"/>
<complexType name="queryBusinessesFindByPartyIdResponse">
<sequence>
<element name="return" type="tns:Businesses" nillable="true"/>
</sequence>
</complexType>
</schema>
<schema xmlns="http://www.w3.org/2001/XMLSchema" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:soap11-enc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:tns="http://www.oracle.com/webservices/internal/literal" targetNamespace="http://www.oracle.com/webservices/internal/literal" elementFormDefault="qualified">
<import namespace="http://smbc.crm.persistence.services/"/>
<complexType name="list">
<complexContent>
<extension base="tns:collection">
<sequence/>
</extension>
</complexContent>
</complexType>
<complexType name="collection">
<sequence>
<element name="item" type="anyType" minOccurs="0" maxOccurs="unbounded"/>
</sequence>
</complexType>
</schema>
</types>
<message name="CRMBusinessWS_queryBusinessesFindByPartyId">
<part name="parameters" element="tns:queryBusinessesFindByPartyId"/>
</message>
<message name="CRMBusinessWS_queryBusinessesFindByPartyIdResponse">
<part name="parameters" element="tns:queryBusinessesFindByPartyIdResponse"/>
</message>
<portType name="CRMBusinessWS">
<operation name="queryBusinessesFindByPartyId">
<input message="tns:CRMBusinessWS_queryBusinessesFindByPartyId"/>
<output message="tns:CRMBusinessWS_queryBusinessesFindByPartyIdResponse"/>
</operation>
</portType>
<binding name="CRMBusinessWSSoapHttp" type="tns:CRMBusinessWS">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="queryBusinessesFindByPartyId">
<soap:operation soapAction=""/>
<input>
<soap:body use="literal"/>
</input>
<output>
<soap:body use="literal"/>
</output>
</operation>
</binding>
<service name="CRMBusinessWSService">
<port name="CRMBusinessSessionEJB" binding="tns:CRMBusinessWSSoapHttp">
<soap:address location="http://blah.solihull.gov.uk:1234/crm-ws/CRMBusinessSessionEJB"/>
</port>
</service>
</definitions>
The web service runs fine and returns a valid XML document (like below):
<?xml version="1.0" encoding="UTF-8"?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:ns0="http://smbc.crm.persistence.services/"
xmlns:ns1="http://www.oracle.com/webservices/internal/literal">
<env:Body>
<ns0:queryBusinessesFindByPartyIdResponse>
<ns0:return>
<ns0:turnover xsi:nil="1"/>
<ns0:partyId>551837</ns0:partyId>
<ns0:employeesLocal xsi:nil="1"/>
<ns0:employeesNational xsi:nil="1"/>
<ns0:businessName xsi:nil="1"/>
<ns0:classificationSic xsi:nil="1"/>
<ns0:registeredBusinessName>Bob The Builder</ns0:registeredBusinessName>
<ns0:classificationLacors xsi:nil="1"/>
<ns0:sbaLinkNumber xsi:nil="1"/>
<ns0:legalStatus xsi:nil="1"/>
<ns0:localAuthority xsi:nil="1"/>
<ns0:bpa>560950</ns0:bpa>
<ns0:dateCommencedTrading xsi:nil="1"/>
<ns0:businessDirectoryListing xsi:nil="1"/>
<ns0:businessStage xsi:nil="1"/>
<ns0:classificationBcl xsi:nil="1"/>
<ns0:employeesGlobal xsi:nil="1"/>
<ns0:descriptionOfBusiness xsi:nil="1"/>
<ns0:businessContactPoints xsi:type="ns1:vector">
<ns1:item xsi:type="ns0:BusinessContactPoints">
<ns0:telCountryCode xsi:nil="1"/>
<ns0:partyId>551837</ns0:partyId>
<ns0:contactPointType>EMAIL</ns0:contactPointType>
<ns0:contactTelephoneNumber xsi:nil="1"/>
<ns0:bpa>560950</ns0:bpa>
<ns0:contactPointId>76330</ns0:contactPointId>
<ns0:telExtensionNumber xsi:nil="1"/>
<ns0:contactEmailAddress>[email protected]</ns0:contactEmailAddress>
<ns0:registeredBusinessName>Bob The Builder</ns0:registeredBusinessName>
<ns0:telAreaCode xsi:nil="1"/>
</ns1:item>
<ns1:item xsi:type="ns0:BusinessContactPoints">
<ns0:telCountryCode>44</ns0:telCountryCode>
<ns0:partyId>551837</ns0:partyId>
<ns0:contactPointType>PHONE</ns0:contactPointType>
<ns0:contactTelephoneNumber>323233</ns0:contactTelephoneNumber>
<ns0:bpa>560950</ns0:bpa>
<ns0:contactPointId>76329</ns0:contactPointId>
<ns0:telExtensionNumber xsi:nil="1"/>
<ns0:contactEmailAddress xsi:nil="1"/>
<ns0:registeredBusinessName>Bob The Builder</ns0:registeredBusinessName>
<ns0:telAreaCode>123</ns0:telAreaCode>
</ns1:item>
</ns0:businessContactPoints>
<ns0:businessAddresses xsi:type="ns1:vector">
<ns1:item xsi:type="ns0:BusinessAddresses">
<ns0:partyId>551837</ns0:partyId>
<ns0:locality>Kingshurst</ns0:locality>
<ns0:paon>20</ns0:paon>
<ns0:siteUseType>HEADQUATERS_FOR</ns0:siteUseType>
<ns0:locationId>34380</ns0:locationId>
<ns0:townName>Birmingham</ns0:townName>
<ns0:registeredBusinessName>Bob The Builder</ns0:registeredBusinessName>
<ns0:saon xsi:nil="1"/>
<ns0:bpa>560950</ns0:bpa>
<ns0:country>GB</ns0:country>
<ns0:uprn>100070950848</ns0:uprn>
<ns0:dateOfOccupancyAtthisaddr xsi:nil="1"/>
<ns0:streetDescriptor>Acacia Avenue</ns0:streetDescriptor>
<ns0:postcode>B37 6AQ</ns0:postcode>
<ns0:countyName xsi:nil="1"/>
<ns0:usrn xsi:nil="1"/>
</ns1:item>
</ns0:businessAddresses>
</ns0:return>
</ns0:queryBusinessesFindByPartyIdResponse>
</env:Body>
</env:Envelope>
The problem is that I'm trying to transform this message in BPEL/ESB but the mapper does not understand the schema as described in the WSDL and will not let me do 'for-each' or 'if' actions on the collections of addresses for example.
I've tried injecting my own WSDL into the EJB3 web service through annotations, but it will not compile....
Can anybody help????
Thanks
Chris -
Problem building schema in provider ABCS
Hi
I imported AccountWSEndPointCRMOnDemand from AIA_HOME\PIP to my jdeveloper(10.1.3.4).but i am getting problem building schema error for one of the partnerlinks.nothing is getting dispalyed if i click on 'show detailed node information'.
I took that wsdl & created a sample bpel which works perfectly fine but with the actual PIP bpel its not working.I pasted the link in IE, it shows the contents corretly.
Please advice!
ThanksThe accountAdapter.wsdl contents is as follows:
<?xml version="1.0" encoding="UTF-8"?>
<definitions
targetNamespace="urn:crmondemand/ws/account/10/2004"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="urn:crmondemand/ws/account/10/2004"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
>
<import namespace="urn:crmondemand/ws/account/10/2004" location="http://host:port/AIAComponents/ApplicationObjectLibrary/CRMOD/ODR15/wsdls/account.wsdl"/>
<plnk:partnerLinkType name="Default_Binding_Account_PL">
<plnk:role name="Default_Binding_Account_Role">
<plnk:portType name="tns:Default_Binding_Account"/>
</plnk:role>
</plnk:partnerLinkType>
</definitions>
wherein account.wsdl has xsd info which is working fine in the browser.
Also which checkbox i need to check in jdeveloper to see the error details. -
Partnerlink - Problem building schema
Hi,
I have following problem:
I created 2 BPEL processes.
One of these processes should be called from the other as a partnerlink.
When I create the partnerlink, pointing to the deployed wsdl, I get following error "Problem building schema" when I try to access the input variable that was created by the invoke activity.
I have tried a lot of things but keep on getting this error.
When I create a new, empty BPEL process, and do exactly the same it does work!
any help would be greatly appreciated.....Hello,
please be careful with the "Problem building schema"-error not to mix up the reasons. As far as I know this error can be caused by different ways, e. g. schema is not valid, wsdl is not accesible...
Therefore please check at first of a local copy of the wsdl is working or not. In lather case there might be a trouble in the wsdl, more preciously in type definition.
@Ruerd: If you want I can have a look at your wsdl to see if it is valid - just post the code here.
BR,
Hansi -
Problem building record set using Dreamweaver CS6 Cloud Product
I am having a problem building a Results Page using Dreamweaver CS6. I have followed all the steps described in Dreamweaver/Build Search and Results Page Article (multiple times). It seems that when I save the Results page it does not copy the php used to build the dynamic table. In fact when I view the source, I do not see any php code.
Additionally, when I attempt to bind the record set, it also does not accept the Default Value(s). Enstead it gives me a list of all data in the colum(s) chosen for the record set (using Where..LIKE..variable definition).
Any suggestions?
Regards,
NorvYes, I will be glad to go through each step. I will also provide code.
Step 1: Built the Search Page by adding Form into exisitng htm page. Used Insert> Form>Form to insert Form area. Then added three (3) text fields using Text Icon from the Form Menu Bar (Classic View).
Step 2: Added a Submit and Reset Button to the Search Page. Again used the Form Menu Bar to create the Buttons.
Step 3: Selecte the <form> tag at bottom of Document Window to point Form to the Results Page (using the Action Box.
Saved page and then began building the Results Page using an existing htm page. Saved the Results Page as a .php document.
Results Page: Here are steps taken to build Results Page (Code will follow):
1/ On the Results Page created a Recordset using the bindings dialog box. Used the Advanced Recordset Dialog Box. In the Advanced Dialog Box I used the Select and Where features to create a Recordset that created a 3 column table (records.County, records.ListPrice, records.PropertyType). In the Variable box I created 3 variables (varCounty, varListPrice, varPropertyType). varCounty and varPropertyType parameters are text (Type) and % (for Default Value). varListPrice parameters are floating point (type) and % (for Default Value). RunTime Value is $_REQUEST["ColumnName"].
Here is the Code generated by Dreamweaver. Note, I am not including the code to access the database, because in all tests I am able to access the table. In fact first time I built the dynamic table, everything worked and I saw the Colum and default value. Have never been able to duplicate that effort. :-)
Here is code:
<?php
if (!function_exists("GetSQLValuestring")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION<6) {
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) :
mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "". $theValue ."" : "NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "". $theValue ."" : "NULL";
break;
case "defined"
$theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
break;
return $theValue;
$varCounty_rslistings = "%";
if (isset($_GET["County"])) {
$varCounty_rslistings = $_Get["County"];
$varListPrice_rslistings = "%";
if (isset($_GET["ListPrice"])) {
$varListPrice_rslistings = $_GET["ListPrice"];
$varPropertyType_rslistings = "%";
if (isset($_GET["PropertyType"])); {
$varPropertyType_rslistings = $_GET["PropertyType"];
mysql_select_db($database_MyDB, $MyDB);
$query_reslistings = sprintf("SELECT records.County, records.ListPrice, records.PropertyType FROM records WHERE records.County LIKE %s AND records.ListPrice LIKE %s AND records.PropertyType LIKE %s", GetSQLValueString($varCounty_rslistings, "text"),GetSQLValueString($varListPrice_rslistings,"double"),
GetSQLValueString($varPropertyType_rslistings,"text"));
$rslistings = mysql_query($query_rslistings, $MyDB) or die(mysql_error());
$row_rslistings = mysql_fetch_assoc($rslistings);
$totalRows_rslistings = mysql_num_rows($rslistings);
?>
That's the code that was generated by Dreamweaver.
Thanks in advance for your assistance -
Hp pavilion dv7. i get a problem of dvd player hp bd-re bt10n.
hp pavilion dv7. i get a problem of dvd player hp bd-re bt10n. it indicated that " windows cannot load the device driver for this hardware. The driver may be corrupted or missing."
Hi,
First, try the automated fixit from Microsoft on the link below.
Windows 7
Vista
Check if the drive is now working.
If it still doesn't work, click the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'. In to the prompt type the following command and hit enter.
sfc /scannow ( note that there is a space between sfc and the / )
Let the process complete, then type exit and hit enter.
Next, click the Start Menu, open the Control Panel and click on Device Manager. Next click to open DVD/CD-ROM Drives. Right click the drive and select uninstall. Do not delete drivers if asked. When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ). Let windows reinstall the drive and see if it now works.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Bpel variables return Http 503 (problem building schema) error
First of all if I have posted this in the wrong forum, I apologise in advance.
I have recently installed the Oracle SOA suite and I have downloaded JDeveloper 10.1.3.3, I am running the (http://download.oracle.com/otndocs/products/bpel/orderbooking.pdf) Oracle® BPEL Process Manager Tutorial and when attempting to create a copy rule I have noticed that some of my variables return the following error:
Exception - Problem building schema
expanded error:
Exception: Server returned HTTP response code: 503 for URL: http://MYID.MYDOMAIN.com:80/orabpel/default/CreditRatingService/CreditRatingService?wsdl
I can access the WSDL directly and it is visible in my Bpel console window too, yet JDeveloper seems to be having trouble with it. I have setup an integration server connection to the BPEL server and from there, when I attempt to validate WSDL I don't get any problems.
I was wondering if anyone could help as this has got me stuck and I can't continue any further.
Edited by: Saheem on Jun 8, 2009 3:33 PMDisable the proxy settings in JDeveloper.
Marc
Maybe you are looking for
-
Uploading an image file from client to a db column
hi, I need help with the subject above, I downloaded the webUtil package but I don't know how to configure it & use it.. I'm not a professional developer, I'm a student and this is for my graduation project and I need help fast my project is due med
-
After upgrading iTunes on my laptop to version 10.5.1, my player will NOT play any songs. My Library seems intact and no songs appear to be missing, but no song will play --not a song downloaded from iTunes Store, nor a song downloaded from a CD. I w
-
What is wrong with my computer or is it the program site that I am in? It keeps telling me that I must install Adobe Flash Player but Adobe says it is installed and up dates do not apply. Help because I cannot go further on the site that I am on and
-
How to (grep) similar words ending or not in s?
The idea is to recognize identical words like: car /cars house/houses, etc. Could not solve with look-behinds, etc.
-
Ps Elements 4.0 for windows in my mac?
Can I run my Photoshop elements 4.0 for windows in my mac? Thanks.