Problem building J-K Flip-Flop out of gates and other circuits

Hey
I've been having problems with Multisim 11.0 when ever I try building a J-K Flip-Flop out of gates .
The simulation stops at the fourth clock and doesn't want to set Q low, I've seen the error in other design were multisim doesn't want to do the logic operations.
Multisim seems to have problem were whenever there is a wire that splits from an outputs to two inputs, I've used the measurement probe on an other design and it shows that when ever there is a spilt the simulation it say its state is unknown...... Well I jus found out that when I put a probe on the schematic and status the simulation then it works perfectly
The picture should explain a lot more
I hope you can understand what my problem is
If I could get a solution to This problem(s) it would be great because I would like to be able to make more circuits without using several hours of trouble shooting only to come to the conclusion that it should probably work even though the simulation says no...
This would save a lot of time when I'm building those circuits in school and I would be able to make bigger circuit simulation
No matter how clever and complete your research is, there is always someone who knows more.
Attachments:
JK flip flop.ms11 ‏295 KB

Wasn't the design file attached?
I'll try to attach all the design just to be sure...
But the design that I really wish to get working correctly is the JK flip flop
No matter how clever and complete your research is, there is always someone who knows more.
Attachments:
Circuit Design Suite 11.0.zip ‏468 KB

Similar Messages

With the new IOS 7 mi iPhone has problems with the screen, I go out once stripes, and Apple told me it is the software. help when there is a new update?????

with the new IOS 7 mi iPhone has problems with the screen, I go out once stripes, and Apple told me it is the software. help when there is a new update?????

We are users here. We cannot possibly know when a new update will be available.

Tracks out of order and other problems

For one of my albums, the tracks are all out of order. I have edited the information, and the track numbers are proper, but it will not order them correctly. I have even removed the files from Itunes and then added them again--still they do not go in order. Then when I move the files onto my Ipod they are out of order, and it's very annoying. If Itunes won't recognize the track numbers, how do I reorganize them?
My other problem is manly with the Ipod. I'm not entirely sure what I did to cause this but on my Ipod, an artist is doubled. And yet when I view the songs list on Itunes (the list of my Ipod) there is only one artist. How am I supposed to fix this?
I've tried everything I would know of, and neither problems can fix. Thanks to everyone who replies.
Message was edited by: Zuzanna

ditto on tracks out of order. anyone? please?

Problem with iPhone 4s when ran out of battery and charged. Siri keeps talking and I could not use my iphone.

Problem with iPhone 4s when ran out of battery. After charging and on main screen, Siri keeps telling me what I have on my main screen. I selected any icon and it's not responding except Siri telling me what it is. Nothing is happening. I cannot even move to next screen. I cannot use my phone totally. I need help. I turned off and on and not working.

It's not Siri that is talking, it is one of the accessibility features. If you can't go to Settings to change the accessibility settings you will have to restore the phone from Recovery mode: http://support.apple.com/kb/HT1808

My I pad is not closing out of Facebook and other apps. I have to turn it off to close them

I am having trouble closing out of face book and other apps. My I pad is two years old . I have to turn it off to go into another page.

You cannot remove the software update notification. It will not go away. If you have the iPad2, you can update the device to iOS 6.0.1. It is your choice to not update, but you cannot remove the update notification.

Problem fixing Lacie disk as storage directory for Itunes and other program

Hello,
I have a Lacie disk 250 GB, it works well but i don´t know why it creates different volumes, like "Lacie Disk 1", "Lacie Disk 2", etc. Like that untill 5! The problem is that once the system creates a new volume version, i can´t find the files in the older volume version. I have a lot of information in my "Lacie Disk 4" but can´t reach it. How can I do to enter to the Volumes folder from the finder? Thank u very much for assistance

Hi eww,
Sorry, i didn´t explained it very well, but the problem is that I don´t understand this problem too. So, to answer you. 1) I did not partitioned my disk ; 2) When I connect it, i have just "Lacie Disk" on my finder ; 3) When I mention "volumes" the thing is that when I want to choose a directory for my downloads or Itunes, it appears on Powerbook G4/Volumes/LacieDisk. But then, I try to find it on the Finder but I can´t see that folder "volumes".
I opened Disk utility, and just to show how it appears
"Mount Point : /Volumes/LaCie Disk 5". My problem is that i don´t know why, it changed from LaCieDisk 4 to 5, and that i have information on that one which I can´t see but know it is there.
Hope to be clearer now, but i´m not sure :)) If you want i can send u by email a photo of my problem

Visio Cisco Equipment Shapes out of Proportion and others Missing

Hello Everyone,
Have any of you noticed that the shapes of line cards and port cards are out of proportion with the chassis Visio shape in which you place them. The ones below leave gaps not representative of the actual physical equipment. Also, it seems not all the shapes are included with the VSS files.
WS-X45-Sup6-E Supervisor Engine 6-E
WS-X4548-GB-RJ45
WS-X4648-RJ45V+E
WS-X4306-GB
The attached image provides and excellent example of the issue with the current Cisco Visio Shapes.
Thanks,
C. Z.

Hi CZ,
You are correct that some of the line cards on that stencil do not fit properly into the chassis. Those icons/shapes were produced by the previous vendor prior to 2009 when we took this over. The shapes produced by my group do fit correctly, for example the WS-X4748-RJ45-E. The product group did not authorize us to go back to retrofit the older shapes and that's why they do not fit as expected.
Regarding missing shapes, we produce what the product group orders from us but I can often ask them to fund additional shapes when there is a forum request. Please understand that they will not accept requests for end of life products.
Brett Newman
Cisco Visio Development
www.shapesource.com

I have an iPad 1. It continually kicks me out of Facebook and other apps and the Internet. Help?

I have an iPad 1 that continually kicks me out of Facebook, some games, and Internet searches.

Hey there Larry,
It sounds like your iPad is closing your apps without notice. I would start by closing all the running apps on the iPad first:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that and restart the phone and test the issue again:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Thank you for using Apple Support Communities.
Take care,
Sterling

Current firefox version wipes out internet conection and other programs as "incompatible" Any solution ??

Repeated efforts to downloaded latest version of firefox results in error message that various programs are incompatible with firefox, including roadrunner internet connection and most every Java subprogram.
Would like to switch to latest version of firfefox, but always have to restore computer to earlier 3.6 version.
Any solution ??

Hi there rbowman, I can understand how concerning this is. It sounds like you set up Firefox on one or a couple of computers. It also sounds like you went with the regular version of Firefox. When you first set up Firefox it ask if you would like to pull settings, history, etcetera. I believe it does this after an update too. At lest in the regular one. So the employee must of said yes I want all my stuff from IE, and we know how that worked out. Firefox makes a version for the IT admin. It is called Firefox extended support. This lets you manage settings and all of that good stuff that an admin would have to do without going computer to computer. I would recommend you try this. Hope it goes better this time.

How can I construct a flip flop or other similar VI?

Hi all,
I am trying to develop a hardware simulator and the hardware has some feedback in it. For starters, I'm trying to make a simple D flip flop. I can do this using a while loop and shift registers or a feedback node, but I have to make the module non-reentrant so that it stores the internal state between calls.
The problem with this is that I want to be able to put multiple flip flops on a diagram and if the VI is non-reentrant, which I have to do to use functional global variables, they all wind up sharing the same internal state, which is unacceptable. But of course, I can't make it reentrant, otherwise the next time I excute the flip flop VI, it won't be in the right state.
It seems that LabView needs a way to generate a VI that is re-entrant, but yet holds it's internal state on a PER-INSTANTIATION basis.
Any ideas?
Thanks,
Jason

JasonWB wrote:
Thanks - this seems to be working. I have an associate who claims he needs to change the name of the VI, even if it IS reentrant - I am looking into that. Thanks much for the help! I was getting confused with functional globals, thinking that was what I needed. So, I assume that as long as the particular instantiation is loaded into memory, it will hold all internal values in shift registers?
Your associate may be seeing something that could be tricking him into thinking that. Like if he is initializing the shift registers outside the loop, then the registers will not hold the previous value because they get re-initialized on each run. This has nothing to do with it being reentrant, it's just doing what it's wired to do.
Functional Globals are actually just subVIs that are not reentrant so that they can share data the same way a regular variable does.
And you're correct in that as long as the reentrant is in memory, the values in it's shift registers will hold.
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.

RemoteUpdateManager problem... and other questions

Hi.
We are trying to evaluate which update solution to use.
We package the apps with CCP, and the users should never get prompted about updates and they are not able to download/upgrade by them self, and they are not admins on their computers. So far we haven´t implemented any update solution.
First of all, when i try remoteupdatemanager.exe in an elevated cmd i get the following message:
RemoteUpdateManager exiting with Return Code (1)
And the remoteupdatemanager.log tells me this:
6/19/13 08:47:15:738 [INFO] AAMEE Utilities RemoteUpdateManager
06/19/13 08:47:15:738 [INFO] AAMEE Utilities RemoteUpdateManager   ##################################################
06/19/13 08:47:15:738 [INFO] AAMEE Utilities RemoteUpdateManager   ##################################################
06/19/13 08:47:15:738 [INFO] AAMEE Utilities RemoteUpdateManager   Launching the RemoteUpdateManager...
06/19/13 08:47:15:738 [INFO] AAMEE Utilities RemoteUpdateManager   RemoteUpdateManager version is : 3.1.105.0 (BuildVersion: 3.1; BuildDate: Tue Sep 04 2012 13:58:18 )
06/19/13 08:47:15:738 [INFO] AAMEE Utilities RemoteUpdateManager   **************************************************
06/19/13 08:47:15:738 [INFO] AAMEE Utilities RemoteUpdateManager   Initializing UpdaterCore Library...
06/19/13 08:47:15:925 [INFO] AAMEE Utilities RemoteUpdateManager   UpdaterCore library initialized successfully.
06/19/13 08:47:15:925 [INFO] AAMEE Utilities RemoteUpdateManager   **************************************************
06/19/13 08:47:15:925 [INFO] AAMEE Utilities RemoteUpdateManager   Starting UpdaterCore CheckForUpdate...
06/19/13 08:47:17:844 [ERROR] AAMEE Utilities RemoteUpdateManager   UpdaterCore failed for CFU errorCode(212) curRefId((null)) errorCodeString(U41M1C212)
06/19/13 08:47:17:844 [INFO] AAMEE Utilities RemoteUpdateManager   **************************************************
06/19/13 08:47:17:922 [INFO] AAMEE Utilities RemoteUpdateManager   ##################################################
06/19/13 08:47:17:922 [INFO] AAMEE Utilities RemoteUpdateManager   Ending the RemoteUpdateManager Return Code (1)
06/19/13 08:47:17:922 [INFO] AAMEE Utilities RemoteUpdateManager   ##################################################
06/19/13 08:47:17:922 [INFO] AAMEE Utilities RemoteUpdateManager   ##################################################
06/19/13 08:47:17:922 [INFO] AAMEE Utilities RemoteUpdateManager
Anyone have any idea about this error?
And then to other update quistions. when i read the documentation about how to update i dont really get it.
1: is one possible solution to package the updates in CCP and then use SCCM to deploy them? i tried to create packages yesterday but the CCP didn´t work so i dont know in what format the updates come in, .exe or .msi and so on.
2: If we go with the solution of having an Adobe update server on our network, do i then need to repackage all our existing apps which have the config "AUM is disabled" and configure the "use internal update server" or can i push out a config for this?
3: If we start to use internal update server, if i choose "enable adobe update manager" will then user be able to update themself? We want to handle all of it for the users, is that what "disable adobe update manager" is? i find this very confusing.
4: Today with our non CC packages (acrobat standard and flash) we are using System Center Updates Publisher to publish acrobat and flash updates to SC Configuration Manager to deploy these updates to the clients the same way we deploy MS updates. Can we use this method for all the CC packages?

ok, first of all we can skip the RemoteUpdateManager problem. I was running the program as an administrator and the administrator did not have the proxy.pac configured. so this is not a problem for now more then figuring out an account and proxy settings that will work in the background.
now another problem, i testet to configure AUSST for the first time now, and i get this error after running the command: --root=c:\ausst --fresh
06/20/13 08:59:26:860 | [INFO] | | AAMEE | Utilities | AUSST | | | 5416 | Item failed C:\AUSST\updates\oobe\aam20\mac\AdobeCaptivate6Core\6.1\setup.dmg.
06/20/13 08:59:27:048 | [WARN] | | AAMEE | Utilities | AUSST | | | 5416 | Unable to download update file C:\AUSST\updates\oobe\aam20\mac\AdobeCaptivate6Core\6.1\setup.dmg
06/20/13 08:59:27:048 | [ERROR] | | AAMEE | Utilities | AUSST | | | 5416 | Server not responding.
06/20/13 08:59:28:062 | [INFO] | | AAMEE | Utilities | AUSST | | | 4448 | Item downloaded C:\AUSST\updates\oobe\aam20\mac\AdobeDreamweaverCS5WS-11.0\11.0.3\.
06/20/13 08:59:28:093 | [INFO] | | AAMEE | Utilities | AUSST | | | 6728 | Item downloaded C:\AUSST\updates\oobe\aam20\mac\AdobeDreamweaverCS5.5-11.5\11.5.3\.
06/20/13 08:59:29:107 | [INFO] | | AAMEE | Utilities | AUSST | | | 4916 | Item downloaded C:\AUSST\updates\oobe\aam20\mac\AdobeDirector12_jp\12\.
06/20/13 08:59:59:777 | [INFO] | | AAMEE | Utilities | AUSST | | | 6728 | Item downloaded C:\AUSST\updates\oobe\aam20\mac\AdobeDreamweaverCS5.5-11.5\11.5.3\.
06/20/13 09:00:13:786 | [INFO] | | AAMEE | Utilities | AUSST | | | 4448 | Item downloaded C:\AUSST\updates\oobe\aam20\mac\AdobeDreamweaverCS5WS-11.0\11.0.3\.
06/20/13 09:00:13:786 | [INFO] | | AAMEE | Utilities | AUSST | | | 2968 | Item: C:\AUSST\updates\oobe\aam20\mac\AdobeCaptivate6Core\6.1\
06/20/13 09:00:13:801 | [INFO] | | AAMEE | Utilities | AUSST | | | 2968 | AdobeUpdateServerSetupTool Returned with code: 5.
this error came ofter it had processed 967 out of 1022 items
Why?

Problem building application with weblogic.jar placed out of bea install.

Weblogic version: 10.3
EJB Version: 2.x
Method for generating webservices fomr EJBs: servicegen task.
Application Build steps:
Step1) Maven to build the complete application and generate ejb-jar.jar and other projects jars and wars.
Step2) Post maven build success there is an ant script used to generate webservices using ejb’s in the project using servicegen task. Attached is build.xml for ant.
Following is the class path :
.;C:\PROGRA~1\IBM\SQLLIB\java\db2java.zip;C:\PROGRA~1\IBM\SQLLIB\java\db2jcc.jar;C:\PROGRA~1\IBM\SQLLIB\java\sqlj.zip;C:\PROGRA~1\IBM\SQLLIB\java\db2jcc_license_cu.jar;C:\PROGRA~1\IBM\SQLLIB\bin;C:\PROGRA~1\IBM\SQLLIB\java\common.jar;C:\Program Files\IBM\RationalSDLC\ClearQuest\cqjni.jar;C:\bea10.3\wlserver_10.3\server\lib\weblogic.jar;C:\Jeevesh DEV\ULM Core\UnitLinkCore\UnitLink\nordea-ulc\lib\webservices.jar;%JAVA_HOME%\lib\tools.jar;C:\Jeevesh DEV\ULM Core\UnitLinkCore\UnitLink\nordea-ulc\libslf4j-log4j12-1.5.2.jar;C:\Jeevesh DEV\ULM Core\UnitLinkCore\UnitLink\nordea-ulc\lib\struts.jar;C:\Jeevesh DEV\ULM Core\UnitLinkCore\UnitLink\nordea-ulc\lib\bootstrap.jar;C:\Jeevesh DEV\ULM Core\UnitLinkCore\UnitLink\nordea-ulc\lib\db2jcc.jar;C:\Jeevesh DEV\ULM Core\UnitLinkCore\UnitLink\nordea-ulc\lib\db2jcc_license_cu.jar;C:\Jeevesh DEV\ULM Core\UnitLinkCore\UnitLink\nordea-ulc\lib\ehcache-core-2.0.0.jar;C:\Jeevesh DEV\ULM Core\UnitLinkCore\UnitLink\nordea-ulc\lib\j2ee.jar;C:\Jeevesh DEV\ULM Core\UnitLinkCore\UnitLink\nordea-ulc\lib\jdom.jar;C:\Jeevesh DEV\ULM Core\UnitLinkCore\UnitLink\nordea-ulc\lib\log4j-1.2.9.jar;C:\Jeevesh DEV\ULM Core\UnitLinkCore\UnitLink\nordea-ulc\lib\slf4j-api-1.5.8.jar;C:\Jeevesh DEV\ULM Core\UnitLinkCore\UnitLink\Deployment\ulc-dto.jar;C:\Jeevesh DEV\ULM Core\UnitLinkCore\UnitLink\Deployment\ulc-jar.jar;C:\Jeevesh DEV\ULM Core\UnitLinkCore\UnitLink\Deployment\scheduler-ejb.jar;C:\Jeevesh DEV\ULM Core\UnitLinkCore\UnitLink\nordea-ulc\lib\com.bea.core.xml.beaxmlbeans_2.0.0.0_2-5-1.jar;
Problem Area:
As you could notice in the yellow highlighted one that am referring to weblogic.jar from bea installation folder. Now if I use the weblogic.jar from the installation folder then build happens successfully.
However if I copy weblogic.jar to some other location say : C:\Jeevesh DEV\ULM Core\UnitLinkCore\UnitLink\nordea-ulc\lib\weblogic.jar
And include this path in the class path in place of weblogic.jar from the installation path, then I get the following errors: Please refer red highlighted part below…
C:\Jeevesh DEV\ULM Core\UnitLinkCore\UnitLink\ulc-ear>ant
Buildfile: build.xml
ejbwebservice:
[servicegen] weblogic.xml.process.ProcessorFactoryException: XML document does not appear to contain a properly formed D
OCTYPE header
[servicegen] at weblogic.xml.process.ProcessorFactory.getProcessor(ProcessorFactory.java:301)
[servicegen] at weblogic.xml.process.ProcessorFactory.getProcessor(ProcessorFactory.java:241)
[servicegen] at weblogic.ejb20.dd.xml.DDUtils.processXML(DDUtils.java:320)
[servicegen] at weblogic.ejb20.dd.xml.DDUtils.processXML(DDUtils.java:295)
[servicegen] at weblogic.ejb20.dd.xml.DDUtils.processEjbJarXML(DDUtils.java:265)
[servicegen] at weblogic.ejb20.dd.xml.DDUtils.createDescriptorFromJarFile(DDUtils.java:118)
[servicegen] at weblogic.webservice.dd.EJBJarIntrospector.<init>(EJBJarIntrospector.java:47)
[servicegen] at weblogic.webservice.util.WebServiceEarFile.init(WebServiceEarFile.java:177)
[servicegen] at weblogic.webservice.util.WebServiceEarFile.readDD(WebServiceEarFile.java:235)
[servicegen] at weblogic.webservice.util.WebServiceEarFile.<init>(WebServiceEarFile.java:74)
[servicegen] at weblogic.ant.taskdefs.webservices.servicegen.ServiceGenTask.execute(ServiceGenTask.java:177)
[servicegen] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
[servicegen] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[servicegen] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[servicegen] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[servicegen] at java.lang.reflect.Method.invoke(Method.java:597)
[servicegen] at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
[servicegen] at org.apache.tools.ant.Task.perform(Task.java:348)
[servicegen] at org.apache.tools.ant.Target.execute(Target.java:357)
[servicegen] at org.apache.tools.ant.Target.performTasks(Target.java:385)
[servicegen] at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)
[servicegen] at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
[servicegen] at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
[servicegen] at org.apache.tools.ant.Project.executeTargets(Project.java:1189)
[servicegen] at org.apache.tools.ant.Main.runBuild(Main.java:758)
[servicegen] at org.apache.tools.ant.Main.startAnt(Main.java:217)
[servicegen] at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)
[servicegen] at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)
[servicegen] --------------- nested within: ------------------
[servicegen] Error processing file 'META-INF/ejb-jar.xml'. weblogic.xml.process.XMLProcessingException: XML document doe
s not appear to contain a properly formed DOCTYPE header - with nested exception:
[servicegen] [weblogic.xml.process.ProcessorFactoryException: XML document does not appear to contain a properly formed
DOCTYPE header]
--------------- nested within: ------------------
weblogic.webservice.util.WebServiceJarException: Could not process ejb-jar C:\DOCUME~1\ac30416\LOCALS~1\Temp\ulc-ear.ear
-86826932\ejb.jar - with nested exception:
[weblogic.webservice.dd.EJBProcessingException: Can read in ejb DD files. - with nested exception:
[Error processing file 'META-INF/ejb-jar.xml'. weblogic.xml.process.XMLProcessingException: XML document does not appear
to contain a properly formed DOCTYPE header - with nested exception:
[weblogic.xml.process.ProcessorFactoryException: XML document does not appear to contain a properly formed DOCTYPE heade
r]]]
at weblogic.webservice.util.WebServiceEarFile.init(WebServiceEarFile.java:183)
at weblogic.webservice.util.WebServiceEarFile.readDD(WebServiceEarFile.java:235)
at weblogic.webservice.util.WebServiceEarFile.<init>(WebServiceEarFile.java:74)
at weblogic.ant.taskdefs.webservices.servicegen.ServiceGenTask.execute(ServiceGenTask.java:177)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:357)
at org.apache.tools.ant.Target.performTasks(Target.java:385)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)
at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.apache.tools.ant.Project.executeTargets(Project.java:1189)
at org.apache.tools.ant.Main.runBuild(Main.java:758)
at org.apache.tools.ant.Main.startAnt(Main.java:217)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)
Please help as its urgent for me as we cannot have local installation of weblogic. We may just use the required jars.

Weblogic version: 10.3
EJB Version: 2.x
Method for generating webservices fomr EJBs: servicegen task.
Application Build steps:
Step1) Maven to build the complete application and generate ejb-jar.jar and other projects jars and wars.
Step2) Post maven build success there is an ant script used to generate webservices using ejb’s in the project using servicegen task. Attached is build.xml for ant.
Following is the class path :
.;C:\PROGRA~1\IBM\SQLLIB\java\db2java.zip;C:\PROGRA~1\IBM\SQLLIB\java\db2jcc.jar;C:\PROGRA~1\IBM\SQLLIB\java\sqlj.zip;C:\PROGRA~1\IBM\SQLLIB\java\db2jcc_license_cu.jar;C:\PROGRA~1\IBM\SQLLIB\bin;C:\PROGRA~1\IBM\SQLLIB\java\common.jar;C:\Program Files\IBM\RationalSDLC\ClearQuest\cqjni.jar;C:\bea10.3\wlserver_10.3\server\lib\weblogic.jar;C:\Jeevesh DEV\ULM Core\UnitLinkCore\UnitLink\nordea-ulc\lib\webservices.jar;%JAVA_HOME%\lib\tools.jar;C:\Jeevesh DEV\ULM Core\UnitLinkCore\UnitLink\nordea-ulc\libslf4j-log4j12-1.5.2.jar;C:\Jeevesh DEV\ULM Core\UnitLinkCore\UnitLink\nordea-ulc\lib\struts.jar;C:\Jeevesh DEV\ULM Core\UnitLinkCore\UnitLink\nordea-ulc\lib\bootstrap.jar;C:\Jeevesh DEV\ULM Core\UnitLinkCore\UnitLink\nordea-ulc\lib\db2jcc.jar;C:\Jeevesh DEV\ULM Core\UnitLinkCore\UnitLink\nordea-ulc\lib\db2jcc_license_cu.jar;C:\Jeevesh DEV\ULM Core\UnitLinkCore\UnitLink\nordea-ulc\lib\ehcache-core-2.0.0.jar;C:\Jeevesh DEV\ULM Core\UnitLinkCore\UnitLink\nordea-ulc\lib\j2ee.jar;C:\Jeevesh DEV\ULM Core\UnitLinkCore\UnitLink\nordea-ulc\lib\jdom.jar;C:\Jeevesh DEV\ULM Core\UnitLinkCore\UnitLink\nordea-ulc\lib\log4j-1.2.9.jar;C:\Jeevesh DEV\ULM Core\UnitLinkCore\UnitLink\nordea-ulc\lib\slf4j-api-1.5.8.jar;C:\Jeevesh DEV\ULM Core\UnitLinkCore\UnitLink\Deployment\ulc-dto.jar;C:\Jeevesh DEV\ULM Core\UnitLinkCore\UnitLink\Deployment\ulc-jar.jar;C:\Jeevesh DEV\ULM Core\UnitLinkCore\UnitLink\Deployment\scheduler-ejb.jar;C:\Jeevesh DEV\ULM Core\UnitLinkCore\UnitLink\nordea-ulc\lib\com.bea.core.xml.beaxmlbeans_2.0.0.0_2-5-1.jar;
Problem Area:
As you could notice in the yellow highlighted one that am referring to weblogic.jar from bea installation folder. Now if I use the weblogic.jar from the installation folder then build happens successfully.
However if I copy weblogic.jar to some other location say : C:\Jeevesh DEV\ULM Core\UnitLinkCore\UnitLink\nordea-ulc\lib\weblogic.jar
And include this path in the class path in place of weblogic.jar from the installation path, then I get the following errors: Please refer red highlighted part below…
C:\Jeevesh DEV\ULM Core\UnitLinkCore\UnitLink\ulc-ear>ant
Buildfile: build.xml
ejbwebservice:
[servicegen] weblogic.xml.process.ProcessorFactoryException: XML document does not appear to contain a properly formed D
OCTYPE header
[servicegen] at weblogic.xml.process.ProcessorFactory.getProcessor(ProcessorFactory.java:301)
[servicegen] at weblogic.xml.process.ProcessorFactory.getProcessor(ProcessorFactory.java:241)
[servicegen] at weblogic.ejb20.dd.xml.DDUtils.processXML(DDUtils.java:320)
[servicegen] at weblogic.ejb20.dd.xml.DDUtils.processXML(DDUtils.java:295)
[servicegen] at weblogic.ejb20.dd.xml.DDUtils.processEjbJarXML(DDUtils.java:265)
[servicegen] at weblogic.ejb20.dd.xml.DDUtils.createDescriptorFromJarFile(DDUtils.java:118)
[servicegen] at weblogic.webservice.dd.EJBJarIntrospector.<init>(EJBJarIntrospector.java:47)
[servicegen] at weblogic.webservice.util.WebServiceEarFile.init(WebServiceEarFile.java:177)
[servicegen] at weblogic.webservice.util.WebServiceEarFile.readDD(WebServiceEarFile.java:235)
[servicegen] at weblogic.webservice.util.WebServiceEarFile.<init>(WebServiceEarFile.java:74)
[servicegen] at weblogic.ant.taskdefs.webservices.servicegen.ServiceGenTask.execute(ServiceGenTask.java:177)
[servicegen] at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
[servicegen] at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[servicegen] at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[servicegen] at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[servicegen] at java.lang.reflect.Method.invoke(Method.java:597)
[servicegen] at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
[servicegen] at org.apache.tools.ant.Task.perform(Task.java:348)
[servicegen] at org.apache.tools.ant.Target.execute(Target.java:357)
[servicegen] at org.apache.tools.ant.Target.performTasks(Target.java:385)
[servicegen] at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)
[servicegen] at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
[servicegen] at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
[servicegen] at org.apache.tools.ant.Project.executeTargets(Project.java:1189)
[servicegen] at org.apache.tools.ant.Main.runBuild(Main.java:758)
[servicegen] at org.apache.tools.ant.Main.startAnt(Main.java:217)
[servicegen] at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)
[servicegen] at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)
[servicegen] --------------- nested within: ------------------
[servicegen] Error processing file 'META-INF/ejb-jar.xml'. weblogic.xml.process.XMLProcessingException: XML document doe
s not appear to contain a properly formed DOCTYPE header - with nested exception:
[servicegen] [weblogic.xml.process.ProcessorFactoryException: XML document does not appear to contain a properly formed
DOCTYPE header]
--------------- nested within: ------------------
weblogic.webservice.util.WebServiceJarException: Could not process ejb-jar C:\DOCUME~1\ac30416\LOCALS~1\Temp\ulc-ear.ear
-86826932\ejb.jar - with nested exception:
[weblogic.webservice.dd.EJBProcessingException: Can read in ejb DD files. - with nested exception:
[Error processing file 'META-INF/ejb-jar.xml'. weblogic.xml.process.XMLProcessingException: XML document does not appear
to contain a properly formed DOCTYPE header - with nested exception:
[weblogic.xml.process.ProcessorFactoryException: XML document does not appear to contain a properly formed DOCTYPE heade
r]]]
at weblogic.webservice.util.WebServiceEarFile.init(WebServiceEarFile.java:183)
at weblogic.webservice.util.WebServiceEarFile.readDD(WebServiceEarFile.java:235)
at weblogic.webservice.util.WebServiceEarFile.<init>(WebServiceEarFile.java:74)
at weblogic.ant.taskdefs.webservices.servicegen.ServiceGenTask.execute(ServiceGenTask.java:177)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:357)
at org.apache.tools.ant.Target.performTasks(Target.java:385)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)
at org.apache.tools.ant.Project.executeTarget(Project.java:1306)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.apache.tools.ant.Project.executeTargets(Project.java:1189)
at org.apache.tools.ant.Main.runBuild(Main.java:758)
at org.apache.tools.ant.Main.startAnt(Main.java:217)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)
Please help as its urgent for me as we cannot have local installation of weblogic. We may just use the required jars.

Need reset box with flip-flop green LED and reset button

Before I build up a large number of these, is there an off-the-shelf box with flip-flop green LED and reset button?

Hi, I'm not sure what you mean. Are you looking for a phsyical project box witha built in reset switch and LED? Or are you talking about a LabVIEW template?
Chris Bakker
National Instruments
Applications Engineer
Check out LabVIEW 2009 and the New X-series DAQ!

Problem building application using Report Generation Toolkit, LV 2011

I'm using LabVIEW 2011 under Windows 7.
I tried to use Application Builder to create an executable from a large body of code. One thing the application does is load VIs into a subpanel and run them.
Application Builder created the executable and gave no error message. The built application ran except that it couldn't run any of the dynamic VIs.
I finally succeeded in doing a screen grab on a transient dialog (about 1/10 sec. appearance). The dialog showed an attempt to load <vilib>:\Utility\NIReport.llb\NI_report.lvclass.
In one dynamic VI I commented out the call to the only VI that uses the Report Generation Toolkit (called only from dynamic VIs, all of which call it). Sure enough, when I built the application with that change and ran it, the dynamic VI that didn't invoke the Report Generation Toolkit did successfully load into the subpanel and run.
So, trying to prove to myself that that was the only problem, I wrote a VI that does nothing but load a VI into a subpanel and run it. User can choose one of two VIs: one that doesn't call the Report Generation Toolkit (or do much of anything), and one that does. Both VIs run fine standalone.
The not-much-of-anything VI loaded and ran in the subpanel. The other VI didn't--the same dialog, mentioned above, popped up for 1/10 second or less. Screen grab is attached.
When I included LVClass and NIReport.llb folders in the project (from vi.lib\Utility: Snapshot folders), and "Always Included" those folders (per a suggestion on this forum from a few years ago), the result was the same. The result was also the same when I included either one of those folders but not the other. Likewise it doesn't matter whether I add the dynamic VIs as "Always Included" or not.
Another piece of information that may be pertinent: when adding the NIReport.llb folder, I got a message that it was impossible to add a certain VI that's part of some report-type class, because a VI of that name already existed in the project. Screenshot of that dialog is also attached.
VIs and project file are also attached along with the two screenshots. I hardcoded VI paths, so put everything into C:\Testing if you want to see what the code does--or hack as desired, etc.
I will be deeply grateful for any help! And I apologize in advance if there's already some exact or close-enough solution posted--but I doubt there is. I looked around.
Thanks very much,
mws
Attachments:
Test-App-Build.zip ‏336 KB

Hi again,
If you extract all files in the original zip attachment to a folder called C:\Testing on a Windows 7 machine running LV 2011, and then use the build script within the project file to build the application, you can run the application and see what happens. You can also play around with the build parameters, rebuild, run, and see what happens then. You can also open my VIs and see what I'm doing.
The application lets you pick one of two dynamic VIs to run in a subpanel. One VI contains calls both to Report Generation VIs and some functions from the Advanced File Functions palette. The other VI does not.
When you pick the first VI to load and run (the one with the Report Generation and Advanced File Functions calls), it loads into the subpanel but is not executable.
When you pick the second VI to load and run, it does load into the subpanel and execute. So there's nothing wrong with the way I load and run a VI in the subpanel.
In the development environment, the whole thing runs with no problems.
Evidently the built application has problems resolving paths of something called by Report Generation VIs and by the Advanced File Functions I use.
I've done a lot of experimenting and no luck. I've looked in forum archives, etc. etc., for possible solutions. I'm hoping there's some simple solution I've missed.
Thanks very much for any help!

Is my uh... battery suppost to flop out?

Hello my friends, I'd like to tell you of the wonderful things that has happened to me over the past year with myself and my iBook G4.
I got the machine back in February of last year from Amazon.com, they were having a really good deal so I said "What the heck."
It came about 5 days later. I opened up the package and the first thing I knew was the left side of the mouse button was elevated, my friend mentioned that to me but I told him I thought it was normal. Then I noticed a slight warp in the lower portion of the keyboard(you know that little dip between the wrist-wrests and the physical keyboard), I thought that was normal also.
I took the machine up to my cousins for my birthday a few weeks later. I was up on the couch typing an E-Mail when my battery fell out all on its own, so I had to go back and re-type my E-Mail. I have to keep constant watch on the battery while I'm carrying my iBook so the battery doesn't fall out... Some people say it takes a small coin to turn that screw, with me it takes barely a fingernail.
So a few weeks ago when Christmas rolls around, I get a stick of memory. I open up the keyboard and notice that the left little switch to take the keyboard off isn't spring loaded and the right one was. So I put the RAM in and let it be.
Then a few days ago I was on my way to my friends house with my iBook and the battery flops out of the machine onto the hard tar. I picked it up and noticed a small crack and some scuffs in the battery. But that time I was upset and called Apple.
Apple sent me out all the necessary things to send it in for repair. So I package up the machine and send it in...
A few days later I get an E-Mail from Apple saying the need to talk to me about my iBook. So I call them and they tell me that there is nothing they can do because it is my fault that these defects are there, granted I take responsability for the battery falling out, but it shouldn't have fallen out so easily in the first place.
I purchased the Applecare protection plan hoping that an issue like this could be resolved. I payed 300 dollars for the protection plan incase something like this happened. Apple wants to charge me $450 dollars to get the machine repaired.
I then proceded to call Amazon, bu they couldn't do anything about it.
I can't start even to express my feelings for what has gone on here.
It runs great, no problems ever.
Can anyone suggest anything that I should do?

Hi Sparta308,
Welcome to Apple Discussions
That is kind of unusual, I think. I would suggest first buying a new battery. I would do it just incase it might be the battery. The other thing you can do, which is the simplest, is to get some duck tape. I know kids from when I used the G3 iBooks in school that would drop them down a flight of stairs (they were like bricks) and the batter would pop out. You'd see maybe 10 kids with a grey colored battery.
I hope that helps,
Jon
PS I am sorry I don't have much advise

Problem building J-K Flip-Flop out of gates and other circuits

Similar Messages

Maybe you are looking for