Problem building Openbox

I just reintalled Arch and when I tried building openbox-cvs with the PKGBUILD from the AUR I got this error.
./configure: line 21108: syntax error near unexpected token `GLIB,'
./configure: line 21108: `PKG_CHECK_MODULES(GLIB, glib-2.0)'
make: *** No targets specified and no makefile found. Stop.
Any ideas of what may be causing it? :?

ingvildr wrote:
kps wrote:
I already have glib2 installed and I'm building it the correct way and it still doesn't work.
Before I reinstalled Arch it built just fine. :?
EDIT: Here's the complete log.
do you have pkgconfig installed?
Thank you. That's what was missing.

Similar Messages

Problems building a stand alone application with LV 8.6.1.

I'm having problems building a stand alone application with LV8.6.1. I'm using a USB- 6008 DAQ and USB-6501 Digital device in the application. I already have an simple executable on the machine so the Run time Engine is already installed. For the USB DAQ device, I assume I need to include the DAQmx8.8 as one of the installers. When I attempt to build the application, I'm prompted for several disk, one being a distribuition disk 1. I have the installation disk for the developer package. I did not see a distribuiton disk as one of the installation disks. When I insert disk 1 I get an error that another application is trying to run. Could someone tell me which installers I need to include and where do I find the "distributor" disk.
Thank you,

are you building installer for the first time on this PC?...It usually asks for the drivers CDs and some toolkits if required.
you just need to use drivers CDs (comes with LabVIEW) from which you installed on this PC. If you have ever upgraded drivers, then you have to use the latest CDs only.......
another issue may be ...when u insert the driver disk, it has autorun, it will launch drivers installation wizard....close that and then try to build distribution.........
Message Edited by Anil Reddy on 09-25-2009 01:22 PM
Anil Punnam
CLD
LV 2012, TestStand 4.2..........

Error "Problem building schema" while invoking external webservice

Hi,
I have following problem:
I created 2 BPEL processes.
One of these processes should be called from the other as a partnerlink.
When I create the partnerlink, pointing to the deployed wsdl, I get following error "Problem building schema" when I try to access the input variable that was created by the invoke activity.
I have tried a lot of things but keep on getting this error.
When I create a new, empty BPEL process, and do exactly the same it does work!
any help would be greatly appreciated.....

Hi,
I have given this URL 'http://ws.cdyne.com/WeatherWS/Weather.asmx?WSDL'.
Now it is showing the following error
Exception occured in library handler.Not implemented.
Exception of class CX_SIDL_INTERNAL_ERROR
Please have a look into it
Regards,
Dhana

"Problem building schema" exception in BPEL Designer

Hi all,
I use BPEL Designer 10.1.2.0.2 and encounter the following problem:
I built a web service based on the Oracle Toplink How To demo. The web service has one published method that returns a custom 'Customer' object.
I deployed the web service on my localhost (AS 10.1.3)
In my BPEL process, I create a partnerlink based on the WSDL that was generated by JDeveloper and let BPEL Designer create a local copy.
Then I created an invoke and had the wizard create in- and output variables for the invoke.
When I select either the input- or output variable in the structure pane, I get an error message when I click on the 'parameters' entry. The message shown is 'Exception - problem building schema!'
When I check the 'show detailed node information' box no additional info is shown!
Any Idea what might go wrong?
The WSDL looks as follows:
<definitions
name="updCustWS"
targetNamespace="http://examples.ox.model/"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="http://examples.ox.model/"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:tns0="http://examples.ox.model/types/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
xmlns:tns1="http://www.oracle.com/webservices/internal/literal"
>
<types>
<schema xmlns="http://www.w3.org/2001/XMLSchema">
<import namespace="urn:customer-example" schemaLocation="Customer.xsd"/>
</schema>
<schema xmlns="http://www.w3.org/2001/XMLSchema" targetNamespace="http://examples.ox.model/types/"
elementFormDefault="qualified" xmlns:tns="http://examples.ox.model/types/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:soap11-enc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:ns1="http://www.oracle.com/webservices/internal/literal">
<import namespace="http://www.oracle.com/webservices/internal/literal"/>
<import namespace="urn:customer-example" schemaLocation="Customer.xsd"/>
<complexType name="getCust">
<sequence>
<element name="cust" type="tns:Customer" nillable="true"/>
</sequence>
</complexType>
<complexType name="Customer">
<sequence>
<element name="gender" type="string" nillable="true"/>
<element name="dateOfBirth" type="dateTime" nillable="true"/>
<element name="phoneNumbers" type="ns1:vector" nillable="true"/>
<element name="shippingAddress" type="tns:Address" nillable="true"/>
<element name="billingAddress" type="tns:Address" nillable="true"/>
<element name="firstName" type="string" nillable="true"/>
<element name="lastName" type="string" nillable="true"/>
</sequence>
</complexType>
<complexType name="Address">
<sequence>
<element name="postalCode" type="string" nillable="true"/>
<element name="suite" type="string" nillable="true"/>
<element name="street" type="string" nillable="true"/>
<element name="province" type="string" nillable="true"/>
<element name="city" type="string" nillable="true"/>
</sequence>
</complexType>
<complexType name="getCustResponse">
<sequence>
<element name="result" type="tns:Customer" nillable="true"/>
</sequence>
</complexType>
<complexType name="version">
<sequence/>
</complexType>
<complexType name="versionResponse">
<sequence>
<element name="result" type="string" nillable="true"/>
</sequence>
</complexType>
<element name="getCustElement" type="tns:getCust"/>
<element name="getCustResponseElement" type="tns:getCustResponse"/>
<element name="versionElement" type="tns:version"/>
<element name="versionResponseElement" type="tns:versionResponse"/>
</schema>
<schema xmlns="http://www.w3.org/2001/XMLSchema" targetNamespace="http://www.oracle.com/webservices/internal/literal"
elementFormDefault="qualified" xmlns:tns="http://www.oracle.com/webservices/internal/literal"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:soap11-enc="http://schemas.xmlsoap.org/soap/encoding/">
<import namespace="http://examples.ox.model/types/"/>
<import namespace="urn:customer-example" schemaLocation="Customer.xsd"/>
<complexType name="vector">
<complexContent>
<extension base="tns:list">
<sequence/>
</extension>
</complexContent>
</complexType>
<complexType name="list">
<complexContent>
<extension base="tns:collection">
<sequence/>
</extension>
</complexContent>
</complexType>
<complexType name="collection">
<sequence>
<element name="item" type="anyType" minOccurs="0" maxOccurs="unbounded"/>
</sequence>
</complexType>
</schema>
</types>
<message name="UpdCustWS_getCust">
<part name="parameters" element="tns0:getCustElement"/>
</message>
<message name="UpdCustWS_getCustResponse">
<part name="parameters" element="tns0:getCustResponseElement"/>
</message>
<message name="UpdCustWS_version">
<part name="parameters" element="tns0:versionElement"/>
</message>
<message name="UpdCustWS_versionResponse">
<part name="parameters" element="tns0:versionResponseElement"/>
</message>
<portType name="updCustWS">
<operation name="getCust">
<input message="tns:UpdCustWS_getCust"/>
<output message="tns:UpdCustWS_getCustResponse"/>
</operation>
<operation name="version">
<input message="tns:UpdCustWS_version"/>
<output message="tns:UpdCustWS_versionResponse"/>
</operation>
</portType>
<binding name="updCustWSSoapHttp" type="tns:updCustWS">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="getCust">
<soap:operation soapAction="http://examples.ox.model//getCust"/>
<input>
<soap:body use="literal" parts="parameters"/>
</input>
<output>
<soap:body use="literal" parts="parameters"/>
</output>
</operation>
<operation name="version">
<soap:operation soapAction="http://examples.ox.model//version"/>
<input>
<soap:body use="literal" parts="parameters"/>
</input>
<output>
<soap:body use="literal" parts="parameters"/>
</output>
</operation>
</binding>
<service name="updCustWS">
<port name="updCustWSSoapHttpPort" binding="tns:updCustWSSoapHttp">
<soap:address location="http://localhost:7780/toplinkDemo-toplink-context-root/updCustWSSoapHttpPort"/>
</port>
</service>
</definitions>
any help would be greatly appreciated!
Thanks in advance,
Rob

Hi
I know it's an old thread, but I'm having the same issue.
I have created an EJB3 web service that returns an object with 2 nested objects. The autogenerated WSDL looks something like this:
<?xml version = '1.0' encoding = 'UTF-8'?>
<definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:tns0="http://www.oracle.com/webservices/internal/literal" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://smbc.crm.persistence.services/" name="CRMBusinessWSService" targetNamespace="http://smbc.crm.persistence.services/">
<types>
<schema xmlns="http://www.w3.org/2001/XMLSchema" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:ns1="http://www.oracle.com/webservices/internal/literal" xmlns:soap11-enc="http://schemas.xmlsoap.org/soap/encoding/" targetNamespace="http://smbc.crm.persistence.services/" elementFormDefault="qualified">
<import namespace="http://www.oracle.com/webservices/internal/literal"/>
<complexType name="Businesses">
<sequence>
<element name="partyId" type="long" nillable="true"/>
<element name="businessContactPoints" type="ns1:list" nillable="true"/>
<element name="businessAddresses" type="ns1:list" nillable="true"/>
</sequence>
</complexType>
<complexType name="BusinessAddresses">
<sequence>
<element name="locality" type="string" nillable="true"/>
<element name="paon" type="string" nillable="true"/>
<element name="siteUseType" type="string" nillable="true"/>
<element name="locationId" type="long" nillable="true"/>
<element name="townName" type="string" nillable="true"/>
</sequence>
</complexType>
<complexType name="BusinessContactPoints">
<sequence>
<element name="telCountryCode" type="string" nillable="true"/>
<element name="partyId" type="long" nillable="true"/>
<element name="telAreaCode" type="string" nillable="true"/>
</sequence>
</complexType>
<element name="queryBusinessesFindByPartyId" type="tns:queryBusinessesFindByPartyId"/>
<complexType name="queryBusinessesFindByPartyId">
<sequence>
<element name="int_1" type="int"/>
</sequence>
</complexType>
<element name="queryBusinessesFindByPartyIdResponse" type="tns:queryBusinessesFindByPartyIdResponse"/>
<complexType name="queryBusinessesFindByPartyIdResponse">
<sequence>
<element name="return" type="tns:Businesses" nillable="true"/>
</sequence>
</complexType>
</schema>
<schema xmlns="http://www.w3.org/2001/XMLSchema" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:soap11-enc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:tns="http://www.oracle.com/webservices/internal/literal" targetNamespace="http://www.oracle.com/webservices/internal/literal" elementFormDefault="qualified">
<import namespace="http://smbc.crm.persistence.services/"/>
<complexType name="list">
<complexContent>
<extension base="tns:collection">
<sequence/>
</extension>
</complexContent>
</complexType>
<complexType name="collection">
<sequence>
<element name="item" type="anyType" minOccurs="0" maxOccurs="unbounded"/>
</sequence>
</complexType>
</schema>
</types>
<message name="CRMBusinessWS_queryBusinessesFindByPartyId">
<part name="parameters" element="tns:queryBusinessesFindByPartyId"/>
</message>
<message name="CRMBusinessWS_queryBusinessesFindByPartyIdResponse">
<part name="parameters" element="tns:queryBusinessesFindByPartyIdResponse"/>
</message>
<portType name="CRMBusinessWS">
<operation name="queryBusinessesFindByPartyId">
<input message="tns:CRMBusinessWS_queryBusinessesFindByPartyId"/>
<output message="tns:CRMBusinessWS_queryBusinessesFindByPartyIdResponse"/>
</operation>
</portType>
<binding name="CRMBusinessWSSoapHttp" type="tns:CRMBusinessWS">
<soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="queryBusinessesFindByPartyId">
<soap:operation soapAction=""/>
<input>
<soap:body use="literal"/>
</input>
<output>
<soap:body use="literal"/>
</output>
</operation>
</binding>
<service name="CRMBusinessWSService">
<port name="CRMBusinessSessionEJB" binding="tns:CRMBusinessWSSoapHttp">
<soap:address location="http://blah.solihull.gov.uk:1234/crm-ws/CRMBusinessSessionEJB"/>
</port>
</service>
</definitions>
The web service runs fine and returns a valid XML document (like below):
<?xml version="1.0" encoding="UTF-8"?>
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:ns0="http://smbc.crm.persistence.services/"
xmlns:ns1="http://www.oracle.com/webservices/internal/literal">
<env:Body>
<ns0:queryBusinessesFindByPartyIdResponse>
<ns0:return>
<ns0:turnover xsi:nil="1"/>
<ns0:partyId>551837</ns0:partyId>
<ns0:employeesLocal xsi:nil="1"/>
<ns0:employeesNational xsi:nil="1"/>
<ns0:businessName xsi:nil="1"/>
<ns0:classificationSic xsi:nil="1"/>
<ns0:registeredBusinessName>Bob The Builder</ns0:registeredBusinessName>
<ns0:classificationLacors xsi:nil="1"/>
<ns0:sbaLinkNumber xsi:nil="1"/>
<ns0:legalStatus xsi:nil="1"/>
<ns0:localAuthority xsi:nil="1"/>
<ns0:bpa>560950</ns0:bpa>
<ns0:dateCommencedTrading xsi:nil="1"/>
<ns0:businessDirectoryListing xsi:nil="1"/>
<ns0:businessStage xsi:nil="1"/>
<ns0:classificationBcl xsi:nil="1"/>
<ns0:employeesGlobal xsi:nil="1"/>
<ns0:descriptionOfBusiness xsi:nil="1"/>
<ns0:businessContactPoints xsi:type="ns1:vector">
<ns1:item xsi:type="ns0:BusinessContactPoints">
<ns0:telCountryCode xsi:nil="1"/>
<ns0:partyId>551837</ns0:partyId>
<ns0:contactPointType>EMAIL</ns0:contactPointType>
<ns0:contactTelephoneNumber xsi:nil="1"/>
<ns0:bpa>560950</ns0:bpa>
<ns0:contactPointId>76330</ns0:contactPointId>
<ns0:telExtensionNumber xsi:nil="1"/>
<ns0:contactEmailAddress>[email protected]</ns0:contactEmailAddress>
<ns0:registeredBusinessName>Bob The Builder</ns0:registeredBusinessName>
<ns0:telAreaCode xsi:nil="1"/>
</ns1:item>
<ns1:item xsi:type="ns0:BusinessContactPoints">
<ns0:telCountryCode>44</ns0:telCountryCode>
<ns0:partyId>551837</ns0:partyId>
<ns0:contactPointType>PHONE</ns0:contactPointType>
<ns0:contactTelephoneNumber>323233</ns0:contactTelephoneNumber>
<ns0:bpa>560950</ns0:bpa>
<ns0:contactPointId>76329</ns0:contactPointId>
<ns0:telExtensionNumber xsi:nil="1"/>
<ns0:contactEmailAddress xsi:nil="1"/>
<ns0:registeredBusinessName>Bob The Builder</ns0:registeredBusinessName>
<ns0:telAreaCode>123</ns0:telAreaCode>
</ns1:item>
</ns0:businessContactPoints>
<ns0:businessAddresses xsi:type="ns1:vector">
<ns1:item xsi:type="ns0:BusinessAddresses">
<ns0:partyId>551837</ns0:partyId>
<ns0:locality>Kingshurst</ns0:locality>
<ns0:paon>20</ns0:paon>
<ns0:siteUseType>HEADQUATERS_FOR</ns0:siteUseType>
<ns0:locationId>34380</ns0:locationId>
<ns0:townName>Birmingham</ns0:townName>
<ns0:registeredBusinessName>Bob The Builder</ns0:registeredBusinessName>
<ns0:saon xsi:nil="1"/>
<ns0:bpa>560950</ns0:bpa>
<ns0:country>GB</ns0:country>
<ns0:uprn>100070950848</ns0:uprn>
<ns0:dateOfOccupancyAtthisaddr xsi:nil="1"/>
<ns0:streetDescriptor>Acacia Avenue</ns0:streetDescriptor>
<ns0:postcode>B37 6AQ</ns0:postcode>
<ns0:countyName xsi:nil="1"/>
<ns0:usrn xsi:nil="1"/>
</ns1:item>
</ns0:businessAddresses>
</ns0:return>
</ns0:queryBusinessesFindByPartyIdResponse>
</env:Body>
</env:Envelope>
The problem is that I'm trying to transform this message in BPEL/ESB but the mapper does not understand the schema as described in the WSDL and will not let me do 'for-each' or 'if' actions on the collections of addresses for example.
I've tried injecting my own WSDL into the EJB3 web service through annotations, but it will not compile....
Can anybody help????
Thanks
Chris

Problem building schema in provider ABCS

Hi
I imported AccountWSEndPointCRMOnDemand from AIA_HOME\PIP to my jdeveloper(10.1.3.4).but i am getting problem building schema error for one of the partnerlinks.nothing is getting dispalyed if i click on 'show detailed node information'.
I took that wsdl & created a sample bpel which works perfectly fine but with the actual PIP bpel its not working.I pasted the link in IE, it shows the contents corretly.
Please advice!
Thanks

The accountAdapter.wsdl contents is as follows:
<?xml version="1.0" encoding="UTF-8"?>
<definitions
targetNamespace="urn:crmondemand/ws/account/10/2004"
xmlns="http://schemas.xmlsoap.org/wsdl/"
xmlns:tns="urn:crmondemand/ws/account/10/2004"
xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/"
xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/"
xmlns:plnk="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/"
>
<import namespace="urn:crmondemand/ws/account/10/2004" location="http://host:port/AIAComponents/ApplicationObjectLibrary/CRMOD/ODR15/wsdls/account.wsdl"/>
<plnk:partnerLinkType name="Default_Binding_Account_PL">
<plnk:role name="Default_Binding_Account_Role">
<plnk:portType name="tns:Default_Binding_Account"/>
</plnk:role>
</plnk:partnerLinkType>
</definitions>
wherein account.wsdl has xsd info which is working fine in the browser.
Also which checkbox i need to check in jdeveloper to see the error details.

Partnerlink - Problem building schema

Hi,
I have following problem:
I created 2 BPEL processes.
One of these processes should be called from the other as a partnerlink.
When I create the partnerlink, pointing to the deployed wsdl, I get following error "Problem building schema" when I try to access the input variable that was created by the invoke activity.
I have tried a lot of things but keep on getting this error.
When I create a new, empty BPEL process, and do exactly the same it does work!
any help would be greatly appreciated.....

Hello,
please be careful with the "Problem building schema"-error not to mix up the reasons. As far as I know this error can be caused by different ways, e. g. schema is not valid, wsdl is not accesible...
Therefore please check at first of a local copy of the wsdl is working or not. In lather case there might be a trouble in the wsdl, more preciously in type definition.
@Ruerd: If you want I can have a look at your wsdl to see if it is valid - just post the code here.
BR,
Hansi

Problem building record set using Dreamweaver CS6 Cloud Product

I am having a problem building a Results Page using Dreamweaver CS6. I have followed all the steps described in Dreamweaver/Build Search and Results Page Article (multiple times). It seems that when I save the Results page it does not copy the php used to build the dynamic table. In fact when I view the source, I do not see any php code.
Additionally, when I attempt to bind the record set, it also does not accept the Default Value(s). Enstead it gives me a list of all data in the colum(s) chosen for the record set (using Where..LIKE..variable definition).
Any suggestions?
Regards,
Norv

Yes, I will be glad to go through each step. I will also provide code.
Step 1: Built the Search Page by adding Form into exisitng htm page. Used Insert> Form>Form to insert Form area. Then added three (3) text fields using Text Icon from the Form Menu Bar (Classic View).
Step 2: Added a Submit and Reset Button to the Search Page. Again used the Form Menu Bar to create the Buttons.
Step 3: Selecte the <form> tag at bottom of Document Window to point Form to the Results Page (using the Action Box.
Saved page and then began building the Results Page using an existing htm page. Saved the Results Page as a .php document.
Results Page: Here are steps taken to build Results Page (Code will follow):
1/ On the Results Page created a Recordset using the bindings dialog box. Used the Advanced Recordset Dialog Box. In the Advanced Dialog Box I used the Select and Where features to create a Recordset that created a 3 column table (records.County, records.ListPrice, records.PropertyType). In the Variable box I created 3 variables (varCounty, varListPrice, varPropertyType). varCounty and varPropertyType parameters are text (Type) and % (for Default Value). varListPrice parameters are floating point (type) and % (for Default Value). RunTime Value is $_REQUEST["ColumnName"].
Here is the Code generated by Dreamweaver. Note, I am not including the code to access the database, because in all tests I am able to access the table. In fact first time I built the dynamic table, everything worked and I saw the Colum and default value. Have never been able to duplicate that effort. :-)
Here is code:
<?php
if (!function_exists("GetSQLValuestring")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
if (PHP_VERSION<6) {
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) :
mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "". $theValue ."" : "NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? doubleval($theValue) : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "". $theValue ."" : "NULL";
break;
case "defined"
$theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
break;
return $theValue;
$varCounty_rslistings = "%";
if (isset($_GET["County"])) {
$varCounty_rslistings = $_Get["County"];
$varListPrice_rslistings = "%";
if (isset($_GET["ListPrice"])) {
$varListPrice_rslistings = $_GET["ListPrice"];
$varPropertyType_rslistings = "%";
if (isset($_GET["PropertyType"])); {
$varPropertyType_rslistings = $_GET["PropertyType"];
mysql_select_db($database_MyDB, $MyDB);
$query_reslistings = sprintf("SELECT records.County, records.ListPrice, records.PropertyType FROM records WHERE records.County LIKE %s AND records.ListPrice LIKE %s AND records.PropertyType LIKE %s", GetSQLValueString($varCounty_rslistings, "text"),GetSQLValueString($varListPrice_rslistings,"double"),
GetSQLValueString($varPropertyType_rslistings,"text"));
$rslistings = mysql_query($query_rslistings, $MyDB) or die(mysql_error());
$row_rslistings = mysql_fetch_assoc($rslistings);
$totalRows_rslistings = mysql_num_rows($rslistings);
?>
That's the code that was generated by Dreamweaver.
Thanks in advance for your assistance

Bpel variables return Http 503 (problem building schema) error

First of all if I have posted this in the wrong forum, I apologise in advance.
I have recently installed the Oracle SOA suite and I have downloaded JDeveloper 10.1.3.3, I am running the (http://download.oracle.com/otndocs/products/bpel/orderbooking.pdf) Oracle® BPEL Process Manager Tutorial and when attempting to create a copy rule I have noticed that some of my variables return the following error:
Exception - Problem building schema
expanded error:
Exception: Server returned HTTP response code: 503 for URL: http://MYID.MYDOMAIN.com:80/orabpel/default/CreditRatingService/CreditRatingService?wsdl
I can access the WSDL directly and it is visible in my Bpel console window too, yet JDeveloper seems to be having trouble with it. I have setup an integration server connection to the BPEL server and from there, when I attempt to validate WSDL I don't get any problems.
I was wondering if anyone could help as this has got me stuck and I can't continue any further.
Edited by: Saheem on Jun 8, 2009 3:33 PM

Disable the proxy settings in JDeveloper.
Marc

Exception:Problem building schema

Hi all,
I want to make a web service call to a service deployed in weblogic, I copied the wsdl to a local file and I created a PartnerLink referring to the wsdl in my local file. I put an Invoke action, create an input variable, everything work fine. However when I try to explore the input variable I got exception:Problem building schema.
Is there anything wrong with the WSDL? I've validate it and it was ok.
Thanks in advance,
santoso
Here is the WSDL of the service:
<?xml version='1.0' encoding='UTF-8'?>
<definitions name="ProposalWSServiceDefinitions" targetNamespace="http://com/my/ws" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:s0="http://com/my/ws" xmlns:s1="http://schemas.xmlsoap.org/wsdl/soap/">
<types>
<schema attributeFormDefault="qualified" elementFormDefault="qualified" targetNamespace="http://www.my.com/opl" xmlns="http://www.w3.org/2001/XMLSchema" xmlns:s0="http://com/my/ws" xmlns:s1="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tns="http://www.my.com/opl">
<complexType name="Proposal">
<sequence>
<element name="id" type="int"/>
<element name="title" type="string"/>
<element name="creator" type="string"/>
<element name="status" type="string"/>
<element name="customerId" type="int"/>
</sequence>
</complexType>
<element name="ProposalData" type="tns:Proposal"/>
</schema>
<xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" targetNamespace="http://com/my/ws" xmlns:s0="http://com/my/ws" xmlns:s1="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="insertProposal">
<xs:complexType>
<xs:sequence>
<xs:element name="proposal" type="opl:Proposal" xmlns:opl="http://www.my.com/opl"/>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>
</types>
<message name="insertProposal">
<part element="s0:insertProposal" name="parameters"/>
</message>
<portType name="ProposalWS">
<operation name="insertProposal" parameterOrder="parameters">
<input message="s0:insertProposal"/>
</operation>
</portType>
<binding name="ProposalWSServiceSoapBinding" type="s0:ProposalWS">
<s1:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="insertProposal">
<s1:operation soapAction="" style="document"/>
<input>
<s1:body parts="parameters" use="literal"/>
</input>
</operation>
</binding>
<service name="ProposalWSService">
<port binding="s0:ProposalWSServiceSoapBinding" name="ProposalWSSoapPort">
<s1:address location="http://172.16.208.45:7001/SBSWebService/ProposalWS"/>
</port>
</service>
</definitions>

I've solved it just by upgrading to BPEL 10.1.3.1 (was 10.1.2.0)

Problem building schema on WSDL for Partnerlink

Hi,
We use PL/SQL webservices, which are being generated with JDeveloper. As long as it contains single Object Types, there's no problem with defining the WS as Partnerlink and using it.
However, we've made one service that returns several occurrences (array). That shouldn't be a problem. But, ... I can define the partnerlink on the basis of the WSDL, but when I try to access the variables it generates with it, i get an exception with the following message: Problem building schema. Detailed node information shows: 'Invalid reference: 'http://schemas.xmlsoap.org/soap/encoding/:Array'


     <definitions name="aanvraagWS" targetNamespace="http://nl/nak/aanvraagService/aanvraagWS.wsdl">
     <types>
     <schema targetNamespace="http://nl.nak.services/AanvraagWS.xsd">
     <complexType name="nl_nak_services_AvrgAvrgOtUser" jdev:packageName="nl.nak.services">
     <all>
<element name="id" type="decimal"/>
<element name="oogstjaar" type="decimal"/>
<element name="aanvraagNummer" type="decimal"/>
<element name="rleId" type="decimal"/>
<element name="kotId" type="decimal"/>
<element name="aantalVerpakkingen" type="decimal"/>
<element name="verpakkingsvorm" type="string"/>
<element name="totaalGewicht" type="decimal"/>
<element name="indBemonsterdNaDrogen" type="string"/>
<element name="partijnummerHandelaar" type="string"/>
<element name="opmerkingen" type="string"/>
<element name="datumBemonstering" type="dateTime"/>
<element name="plombenummer" type="string"/>
<element name="indSpoedonderzoek" type="string"/>
<element name="bemonsterdDoor" type="string"/>
<element name="pdtId" type="decimal"/>
<element name="procesInstanceId" type="decimal"/>
</all>
</complexType>
     <complexType name="nl_nak_services_AanvraagWSImpl_addaanvraag_Out" jdev:packageName="nl.nak.services">
     <all>
<element name="paanvraagotInout" type="ns1:nl_nak_services_AvrgAvrgOtUser"/>
<element name="pserviceberichttypeOut" type="ns1:nl_nak_services_AvrgServiceBerichtOtUser"/>
</all>
</complexType>
     <complexType name="nl_nak_services_AvrgServiceBerichtOtUser" jdev:packageName="nl.nak.services">
     <all>
<element name="serviceCode" type="decimal"/>
<element name="serviceBericht" type="string"/>
</all>
</complexType>
     <complexType name="nl_nak_services_AanvraagWSImpl_getaanvraag_Out" jdev:packageName="nl.nak.services">
     <all>
<element name="paanvraagotOut" type="ns1:nl_nak_services_AvrgAvrgOtUser"/>
<element name="pserviceberichttypeOut" type="ns1:nl_nak_services_AvrgServiceBerichtOtUser"/>
</all>
</complexType>
     <complexType name="nl_nak_services_AanvraagWSImpl_findaanvraag_Out" jdev:packageName="nl.nak.services">
     <all>
<element name="paanvraagotOut" type="ns1:nl_nak_services_AvrgAvrgOtUser"/>
<element name="pserviceberichttypeOut" type="ns1:nl_nak_services_AvrgServiceBerichtOtUser"/>
</all>
</complexType>
     <complexType name="nl_nak_services_AvrgWngOtUser" jdev:packageName="nl.nak.services">
     <all>
<element name="id" type="decimal"/>
<element name="wmrId" type="decimal"/>
<element name="prrId" type="decimal"/>
<element name="avrgId" type="decimal"/>
<element name="waardeNumeriek" type="decimal"/>
<element name="waardeAlfanumeriek" type="string"/>
<element name="datumUitvoering" type="dateTime"/>
<element name="uitvoerder" type="string"/>
<element name="istId" type="decimal"/>
</all>
</complexType>
     <complexType name="nl_nak_services_AanvraagWSImpl_addwaarneming_Out" jdev:packageName="nl.nak.services">
     <all>
<element name="pwaarnemingotInout" type="ns1:nl_nak_services_AvrgWngOtUser"/>
<element name="pserviceberichttypeOut" type="ns1:nl_nak_services_AvrgServiceBerichtOtUser"/>
</all>
</complexType>
     <complexType name="nl_nak_services_AanvraagWSImpl_getwaarneming_Out" jdev:packageName="nl.nak.services">
     <all>
<element name="pwaarnemingotOut" type="ns1:nl_nak_services_AvrgWngOtUser"/>
<element name="pserviceberichttypeOut" type="ns1:nl_nak_services_AvrgServiceBerichtOtUser"/>
</all>
</complexType>
     <complexType name="nl_nak_services_AanvraagWSImpl_findwaarneming_Out" jdev:packageName="nl.nak.services">
     <all>
<element name="pwaarnemingotInout" type="ns1:nl_nak_services_AvrgWngOtUser"/>
<element name="pserviceberichttypeOut" type="ns1:nl_nak_services_AvrgServiceBerichtOtUser"/>
</all>
</complexType>
     <complexType name="nl_nak_services_AanvraagWSImpl_listwaarnemingperaanvraag_Out" jdev:packageName="nl.nak.services">
     <all>
<element name="pwaarnemingctOut" type="ns1:nl_nak_services_AvrgWngCt"/>
<element name="pserviceberichttypeOut" type="ns1:nl_nak_services_AvrgServiceBerichtOtUser"/>
</all>
</complexType>
     <complexType name="nl_nak_services_AvrgWngCt" jdev:packageName="nl.nak.services">
     <all>
<element name="array" type="ns1:ArrayOfnl_nak_services_AvrgWngOtUser"/>
</all>
</complexType>
     <complexType name="ArrayOfnl_nak_services_AvrgWngOtUser">
     <complexContent>
     <restriction base="SOAP-ENC:Array">
<attribute ref="SOAP-ENC:arrayType" wsdl:arrayType="ns1:nl_nak_services_AvrgWngOtUser[]"/>
</restriction>
</complexContent>
</complexType>
     <complexType name="nl_nak_services_AanvraagWSImpl_listwaarnemingperwerkmonster_Out" jdev:packageName="nl.nak.services">
     <all>
<element name="pwaarnemingctOut" type="ns1:nl_nak_services_AvrgWngCt"/>
<element name="pserviceberichttypeOut" type="ns1:nl_nak_services_AvrgServiceBerichtOtUser"/>
</all>
</complexType>
</schema>
</types>
     <message name="addaanvraag0Request">
<part name="xxpAanvraagOt_inoutxx" type="ns1:nl_nak_services_AvrgAvrgOtUser"/>
</message>
     <message name="addaanvraag0Response">
<part name="return" type="ns1:nl_nak_services_AanvraagWSImpl_addaanvraag_Out"/>
</message>
     <message name="getaanvraag1Request">
<part name="pAanvraagid" type="xsd:decimal"/>
</message>
     <message name="getaanvraag1Response">
<part name="return" type="ns1:nl_nak_services_AanvraagWSImpl_getaanvraag_Out"/>
</message>
     <message name="findaanvraag2Request">
<part name="pOogstjaar" type="xsd:decimal"/>
<part name="pAanvraagNummer" type="xsd:decimal"/>
</message>
     <message name="findaanvraag2Response">
<part name="return" type="ns1:nl_nak_services_AanvraagWSImpl_findaanvraag_Out"/>
</message>
     <message name="addwaarneming3Request">
<part name="xxpWaarnemingOt_inoutxx" type="ns1:nl_nak_services_AvrgWngOtUser"/>
</message>
     <message name="addwaarneming3Response">
<part name="return" type="ns1:nl_nak_services_AanvraagWSImpl_addwaarneming_Out"/>
</message>
     <message name="getwaarneming4Request">
<part name="pWerkmonsterId" type="xsd:decimal"/>
<part name="pAanvraagId" type="xsd:decimal"/>
<part name="pBepalingId" type="xsd:decimal"/>
</message>
     <message name="getwaarneming4Response">
<part name="return" type="ns1:nl_nak_services_AanvraagWSImpl_getwaarneming_Out"/>
</message>
     <message name="findwaarneming5Request">
<part name="xxpWaarnemingOt_inoutxx" type="ns1:nl_nak_services_AvrgWngOtUser"/>
</message>
     <message name="findwaarneming5Response">
<part name="return" type="ns1:nl_nak_services_AanvraagWSImpl_findwaarneming_Out"/>
</message>
     <message name="listwaarnemingperaanvraag6Request">
<part name="pAanvraagId" type="xsd:decimal"/>
</message>
     <message name="listwaarnemingperaanvraag6Response">
<part name="return" type="ns1:nl_nak_services_AanvraagWSImpl_listwaarnemingperaanvraag_Out"/>
</message>
     <message name="listwaarnemingperwerkmonster7Request">
<part name="pWerkmonsterId" type="xsd:decimal"/>
</message>
     <message name="listwaarnemingperwerkmonster7Response">
<part name="return" type="ns1:nl_nak_services_AanvraagWSImpl_listwaarnemingperwerkmonster_Out"/>
</message>
     <portType name="AanvraagWSPortType">
     <operation name="addaanvraag">
<input name="addaanvraag0Request" message="tns:addaanvraag0Request"/>
<output name="addaanvraag0Response" message="tns:addaanvraag0Response"/>
</operation>
     <operation name="getaanvraag">
<input name="getaanvraag1Request" message="tns:getaanvraag1Request"/>
<output name="getaanvraag1Response" message="tns:getaanvraag1Response"/>
</operation>
     <operation name="findaanvraag">
<input name="findaanvraag2Request" message="tns:findaanvraag2Request"/>
<output name="findaanvraag2Response" message="tns:findaanvraag2Response"/>
</operation>
     <operation name="addwaarneming">
<input name="addwaarneming3Request" message="tns:addwaarneming3Request"/>
<output name="addwaarneming3Response" message="tns:addwaarneming3Response"/>
</operation>
     <operation name="getwaarneming">
<input name="getwaarneming4Request" message="tns:getwaarneming4Request"/>
<output name="getwaarneming4Response" message="tns:getwaarneming4Response"/>
</operation>
     <operation name="findwaarneming">
<input name="findwaarneming5Request" message="tns:findwaarneming5Request"/>
<output name="findwaarneming5Response" message="tns:findwaarneming5Response"/>
</operation>
     <operation name="listwaarnemingperaanvraag">
<input name="listwaarnemingperaanvraag6Request" message="tns:listwaarnemingperaanvraag6Request"/>
<output name="listwaarnemingperaanvraag6Response" message="tns:listwaarnemingperaanvraag6Response"/>
</operation>
     <operation name="listwaarnemingperwerkmonster">
<input name="listwaarnemingperwerkmonster7Request" message="tns:listwaarnemingperwerkmonster7Request"/>
<output name="listwaarnemingperwerkmonster7Response" message="tns:listwaarnemingperwerkmonster7Response"/>
</operation>
</portType>
     <binding name="AanvraagWSBinding" type="tns:AanvraagWSPortType">
<soap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http"/>
     <operation name="addaanvraag">
<soap:operation soapAction="" style="rpc"/>
     <input name="addaanvraag0Request">
<soap:body use="encoded" namespace="aanvraagWS" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</input>
     <output name="addaanvraag0Response">
<soap:body use="encoded" namespace="aanvraagWS" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</output>
</operation>
     <operation name="getaanvraag">
<soap:operation soapAction="" style="rpc"/>
     <input name="getaanvraag1Request">
<soap:body use="encoded" namespace="aanvraagWS" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</input>
     <output name="getaanvraag1Response">
<soap:body use="encoded" namespace="aanvraagWS" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</output>
</operation>
     <operation name="findaanvraag">
<soap:operation soapAction="" style="rpc"/>
     <input name="findaanvraag2Request">
<soap:body use="encoded" namespace="aanvraagWS" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</input>
     <output name="findaanvraag2Response">
<soap:body use="encoded" namespace="aanvraagWS" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</output>
</operation>
     <operation name="addwaarneming">
<soap:operation soapAction="" style="rpc"/>
     <input name="addwaarneming3Request">
<soap:body use="encoded" namespace="aanvraagWS" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</input>
     <output name="addwaarneming3Response">
<soap:body use="encoded" namespace="aanvraagWS" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</output>
</operation>
     <operation name="getwaarneming">
<soap:operation soapAction="" style="rpc"/>
     <input name="getwaarneming4Request">
<soap:body use="encoded" namespace="aanvraagWS" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</input>
     <output name="getwaarneming4Response">
<soap:body use="encoded" namespace="aanvraagWS" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</output>
</operation>
     <operation name="findwaarneming">
<soap:operation soapAction="" style="rpc"/>
     <input name="findwaarneming5Request">
<soap:body use="encoded" namespace="aanvraagWS" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</input>
     <output name="findwaarneming5Response">
<soap:body use="encoded" namespace="aanvraagWS" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</output>
</operation>
     <operation name="listwaarnemingperaanvraag">
<soap:operation soapAction="" style="rpc"/>
     <input name="listwaarnemingperaanvraag6Request">
<soap:body use="encoded" namespace="aanvraagWS" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</input>
     <output name="listwaarnemingperaanvraag6Response">
<soap:body use="encoded" namespace="aanvraagWS" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</output>
</operation>
     <operation name="listwaarnemingperwerkmonster">
<soap:operation soapAction="" style="rpc"/>
     <input name="listwaarnemingperwerkmonster7Request">
<soap:body use="encoded" namespace="aanvraagWS" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</input>
     <output name="listwaarnemingperwerkmonster7Response">
<soap:body use="encoded" namespace="aanvraagWS" encodingStyle="http://schemas.xmlsoap.org/soap/encoding/"/>
</output>
</operation>
</binding>
     <service name="aanvraagWS">
     <port name="AanvraagWSPort" binding="tns:AanvraagWSBinding">
<soap:address location="http://nak3.nak.nl:7779/aanvraagService/AanvraagWS"/>
</port>
</service>
</definitions>

Well, the problem is caused by the fact that BPEL does not yet support soapenc:Array types. We've created a workaround by defining two Services, one that has only single returntypes and one that has the multiple returntypes (which are defined using soapenc:Array). There are other solutions, but those are very complicated. Hope this helps!

Problem building schema - Siebel OnDemand Web Services

I'm trying to call a Siebel OnDemand Web Service from BPEL.
I've downloaded the Contact.wsdl from OnDemand and imported it into my project.
I've created a partner link and created variables for the input and output.
The problem is that JDeveloper cannot build the schemas defined in the wsdl.
If you try to copy a value to the Input variable, JDeveloper gives the error:
Exception - Problem building schema!
You cannot navigate the schema path.
Does anyone know why this is happening?

I'm also trying to do this.
Some info from the Siebel web services guide:-
"The login request is an HTTPS request to instantiate a session and obtain a session ID. A client invokes login by sending an HTTP GET request to a URL like the following:
https://secure.crmondemand.com/Services/Integration?command=login
NOTE: The login parameter value is case sensitive.
■ Login input. The input to login is provided in the URL parameters and the HTTP headers, as follows:
■ The only URL parameter to be set is command. This parameter value is login.
Two HTTP headers, UserName and Password, must be set with the appropriate values for your system. For example:
❏ UserName: [email protected]
❏ Password: mypass
■ Login output. The login command returns the following items:
■ A session cookie, jsessionid. The client must use this cookie when submitting subsequent requests, including logoff requests.
■ A status code of 200, if the session does not encounter any errors. This indicates that the request succeeded.
Then to get data out ....
Integration request input. The jsessionid returned to the client during login must be included with the request. The request must contain the jsessionid either as a cookie or as a URL parameter, as follows:
https://secure.crmondemand.com/Services/Integration/object;jsessionid=xyZ12489w3482413
Does anyone have any ideas on how we might do this using the Oracle BPEL PM?
Thanks in advance.

Problem building schema for return type as custom object

Hi i am invoking a web service through a partner link. But when i expand the invoke variables( in structure tab ), it shows Exception- Problem building schema.
Response is of type java:Customer which is a custom object having mobile_no, name, compname.
Error is--
Invalid reference: 'java:customobjectproject:Customer'
wsdl file:
<?xml version='1.0' encoding='UTF-8'?>
<definitions name="CustomerDetailServiceDefinitions" targetNamespace="http://customobjectproject" xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:s0="http://customobjectproject" xmlns:s1="http://schemas.xmlsoap.org/wsdl/soap/">
<types>
<xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" targetNamespace="http://customobjectproject" xmlns:s0="http://customobjectproject" xmlns:s1="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:element name="getCustomer">
<xs:complexType>
<xs:sequence>
<xs:element name="mobileNo" type="xs:int"/>
<xs:element name="name" type="xs:string"/>
<xs:element name="compName" type="xs:string"/>
</xs:sequence>
</xs:complexType>
</xs:element>
<xs:element name="getCustomerResponse">
<xs:complexType>
<xs:sequence>
<xs:element name="return" type="java:Customer" xmlns:java="java:customobjectproject"/>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>
<xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" targetNamespace="java:customobjectproject" xmlns:s0="http://customobjectproject" xmlns:s1="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:xs="http://www.w3.org/2001/XMLSchema">
<xs:complexType name="Customer">
<xs:sequence>
<xs:element minOccurs="1" name="Mobile_no" nillable="false" type="xs:int"/>
<xs:element minOccurs="1" name="Name" nillable="true" type="xs:string"/>
<xs:element minOccurs="1" name="CompName" nillable="true" type="xs:string"/>
</xs:sequence>
</xs:complexType>
</xs:schema>
</types>
<message name="getCustomer">
<part element="s0:getCustomer" name="parameters"/>
</message>
<message name="getCustomerResponse">
<part element="s0:getCustomerResponse" name="parameters"/>
</message>
<portType name="CustomerDetail">
<operation name="getCustomer" parameterOrder="parameters">
<input message="s0:getCustomer"/>
<output message="s0:getCustomerResponse"/>
</operation>
</portType>
<binding name="CustomerDetailServiceSoapBinding" type="s0:CustomerDetail">
<s1:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
<operation name="getCustomer">
<s1:operation soapAction="" style="document"/>
<input>
<s1:body parts="parameters" use="literal"/>
</input>
<output>
<s1:body parts="parameters" use="literal"/>
</output>
</operation>
</binding>
<service name="CustomerDetailService">
<port binding="s0:CustomerDetailServiceSoapBinding" name="CustomerDetailSoapPort">
<s1:address location="http://localhost:7030/CustomerDetail/CustomerDetail"/>
</port>
</service>
</definitions>
I am using jdeveloper 10.1.3.3.0. Please help..
Thanks.

Well, the problem is caused by the fact that BPEL does not yet support soapenc:Array types. We've created a workaround by defining two Services, one that has only single returntypes and one that has the multiple returntypes (which are defined using soapenc:Array). There are other solutions, but those are very complicated. Hope this helps!

Problem building the Schema...

Hi,
I have two BPEL processes..Say 'BPELProcess1' and 'BPELProcess2'..I am trying to invoke the 'BPELProcess1' in 'BPELProcess2'..I am able to create the partner link..but the problem here is when I try to assign the values to the 'BPELProcess1' using an assign activity..It is not showing the variables of the 'BPELProcess1'....Instead it is displaying 'Exception:problem building the schema', Any how I am able to solve this by importing the schema of the 'BPELProcess1'...but Is there any way that we can overcome this problem with out importing the schema....
Note: I am using the JDeveloper 10.1.3.3

I have the same problem - Exception: Problem building schema! I assume something's wrong with the schema (:) but no clue as to how to fix it. Don't see anything helpful on the discussion forum so far, except previous post by Feroz without reply. Anyone?
Thanks
S (newbie)

Problems building w/ Snow Leopard and iPhone SDK 3.0 Snow Leopard

Suddenly having problems building and codesigning after upgrading to Snow Leopard and iPhone SDK 3.0 Snow Leopard.
Profile set to Distribution, Device 2.2.1 Distribution, as has worked in the past.
The build fails with this error:
Command <com.apple.tools.product-pkg-utility> failed with exit code -1
The below section is highlighted in Build Results.
ProcessingProductPackaging /Users/harvey/Documents/iPhoneApp_Work/Listening-Hiragana/iPhone_Comprehension_timerharvey/entitlements.plist "/Users/harvey/Documents/iPhoneApp_Work/Listening-Hiragana/iPhone_Comprehension_timer_harvey/build/iPhoneComprehension.build/Distribution-iphoneos/Kana Listening.build/iPhone_Comprehension.xcent"
cd /Users/harvey/Documents/iPhoneApp_Work/Listening-Hiragana/iPhone_Comprehension_timerharvey
setenv PATH "/Developer/Platforms/iPhoneOS.platform/Developer/usr/bin:/Developer/usr/bin:/u sr/bin:/bin:/usr/sbin:/sbin"
<com.apple.tools.product-pkg-utility> /Users/harvey/Documents/iPhoneApp_Work/Listening-Hiragana/iPhone_Comprehension_timerharvey/entitlements.plist -entitlements -format xml -o "/Users/harvey/Documents/iPhoneApp_Work/Listening-Hiragana/iPhone_Comprehension_timer_harvey/build/iPhoneComprehension.build/Distribution-iphoneos/Kana Listening.build/iPhone_Comprehension.xcent"
Any ideas? This is really strange.
The same error occurs when trying to build for Device - 3.0, and any other version it seems.
This is especially frustrating as I'm simply trying to update an app that I released before I upgraded.
I will love whoever helps me forever and ever.
saikyo

Found the new SDK on the CD. Now I am running XCode 3.2.
I'm talking to myself now for the benefit of future readers.
On the Dev Center I see the note:
"Important: You will need to re-install the iPhone SDK for Snow Leopard if you plan on developing iPhone applications after upgrading your Mac to Snow Leopard and installing Xcode 3.2."
So I'm going to download and install the iPhone SDK 3.0 (Snow Leopard) from the SDK downloads area on the Dev Center page. This seems weird to me as it's 3.0... but I'm running 3.2 now... I guess this will just update my 3.2?
I also notice that when I run XCode 3.2 I don't have Simulator as an option anymore in my profiles.
Going to go ahead with the update now and see how it goes.

PROBLEM BUILDING WSDL USING JDEV BPEL DESIGNER

I have a WSDL that has been generated for MS SQLServer stored proc. I have created SOAP request using XML Spy and posted request to server succesfully.
Imported the same WSDL and created Partner Link in BPEL process successfully but When i try to assign values to Input variable (XSD), I am getting Error : Problem Building Schema.
Then I clicked on check box for details, it shows :
Exception: Invalid reference: 'http://www.w3.org/2001/XMLSchema:schema'
I appreciate any help in this.
Thanks.
Here WSDL file :
<?xml version="1.0"?>

<wsdl:definitions xmlns:tns="http://DWLV06ENG030/Deleteme/deleteme" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:sql="http://schemas.microsoft.com/SQLServer/2001/12/SOAP" xmlns:sqltypes="http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types" xmlns:sqlmessage="http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types/SqlMessage" xmlns:sqlresultstream="http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types/SqlResultStream" name="deleteme" targetNamespace="http://DWLV06ENG030/Deleteme/deleteme">
     <wsdl:types>
          <xsd:schema targetNamespace="http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types" elementFormDefault="qualified" attributeFormDefault="qualified">
               <xsd:simpleType name="nonNegativeInteger">
                    <xsd:restriction base="xsd:int">
                         <xsd:minInclusive value="0"/>
                    </xsd:restriction>
               </xsd:simpleType>
               <xsd:attribute name="IsNested" type="xsd:boolean"/>
               <xsd:complexType name="SqlRowSet">
                    <xsd:sequence>
                         <xsd:element ref="xsd:schema"/>
                         <xsd:any/>
                    </xsd:sequence>
                    <xsd:attribute ref="sqltypes:IsNested"/>
               </xsd:complexType>
               <xsd:complexType name="SqlXml" mixed="true">
                    <xsd:sequence>
                         <xsd:any/>
                    </xsd:sequence>
               </xsd:complexType>
               <xsd:simpleType name="SqlResultCode">
                    <xsd:restriction base="xsd:int">
                         <xsd:minInclusive value="0"/>
                    </xsd:restriction>
               </xsd:simpleType>
          </xsd:schema>
          <xsd:schema targetNamespace="http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types/SqlMessage" elementFormDefault="qualified" attributeFormDefault="qualified">
               <xsd:import namespace="http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types"/>
               <xsd:complexType name="SqlMessage">
                    <xsd:sequence minOccurs="1" maxOccurs="1">
                         <xsd:element name="Class" type="sqltypes:nonNegativeInteger"/>
                         <xsd:element name="LineNumber" type="sqltypes:nonNegativeInteger"/>
                         <xsd:element name="Message" type="xsd:string"/>
                         <xsd:element name="Number" type="sqltypes:nonNegativeInteger"/>
                         <xsd:element name="Procedure" type="xsd:string"/>
                         <xsd:element name="Server" type="xsd:string"/>
                         <xsd:element name="Source" type="xsd:string"/>
                         <xsd:element name="State" type="sqltypes:nonNegativeInteger"/>
                    </xsd:sequence>
                    <xsd:attribute ref="sqltypes:IsNested"/>
               </xsd:complexType>
          </xsd:schema>
          <xsd:schema targetNamespace="http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types/SqlResultStream" elementFormDefault="qualified" attributeFormDefault="qualified">
               <xsd:import namespace="http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types"/>
               <xsd:import namespace="http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types/SqlMessage"/>
               <xsd:complexType name="SqlResultStream">
                    <xsd:choice minOccurs="1" maxOccurs="unbounded">
                         <xsd:element name="SqlRowSet" type="sqltypes:SqlRowSet"/>
                         <xsd:element name="SqlXml" type="sqltypes:SqlXml"/>
                         <xsd:element name="SqlMessage" type="sqlmessage:SqlMessage"/>
                         <xsd:element name="SqlResultCode" type="sqltypes:SqlResultCode"/>
                    </xsd:choice>
               </xsd:complexType>
          </xsd:schema>
          <xsd:schema targetNamespace="http://DWLV06ENG030/Deleteme/deleteme" elementFormDefault="qualified" attributeFormDefault="qualified">
               <xsd:import namespace="http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types"/>
               <xsd:import namespace="http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types/SqlMessage"/>
               <xsd:import namespace="http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types/SqlResultStream"/>
               <xsd:element name="sp_deleteme">
                    <xsd:complexType>
                         <xsd:sequence>
                              <xsd:element minOccurs="0" maxOccurs="1" name="name" type="xsd:string" nillable="true"/>
                         </xsd:sequence>
                    </xsd:complexType>
               </xsd:element>
               <xsd:element name="sp_deletemeResponse">
                    <xsd:complexType>
                         <xsd:sequence>
                              <xsd:element minOccurs="1" maxOccurs="1" name="sp_deletemeResult" type="sqlresultstream:SqlResultStream"/>
                         </xsd:sequence>
                    </xsd:complexType>
               </xsd:element>
          </xsd:schema>
     </wsdl:types>
     <wsdl:message name="sp_deletemeIn">
          <wsdl:part name="parameters" element="tns:sp_deleteme"/>
     </wsdl:message>
     <wsdl:message name="sp_deletemeOut">
          <wsdl:part name="parameters" element="tns:sp_deletemeResponse"/>
     </wsdl:message>
     <wsdl:portType name="SXSPort">
          <wsdl:operation name="sp_deleteme">
               <wsdl:input message="tns:sp_deletemeIn"/>
               <wsdl:output message="tns:sp_deletemeOut"/>
          </wsdl:operation>
     </wsdl:portType>
     <wsdl:binding name="SXSBinding" type="tns:SXSPort">
          <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
          <wsdl:operation name="sp_deleteme">
               <soap:operation soapAction="http://DWLV06ENG030/Deleteme/deleteme/sp_deleteme" style="document"/>
               <wsdl:input>
                    <soap:body use="literal"/>
               </wsdl:input>
               <wsdl:output>
                    <soap:body use="literal"/>
               </wsdl:output>
          </wsdl:operation>
     </wsdl:binding>
     <wsdl:service name="deleteme">
          <wsdl:port name="SXSPort" binding="tns:SXSBinding">
               <soap:address location="http://DWLV06ENG030/Deleteme/deleteme"/>
          </wsdl:port>
     </wsdl:service>
</wsdl:definitions>

Hi,
i tried a bit with your xsds in the wsdl. The only way to get jdeveloper work with the xsd is to put them in one file (see below). Another way is perhaps using 4 files with real imports and location attributes...
Like you see, i had to change the xmlns:xsd to xmlns.
<schema targetNamespace="http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types"
xmlns="http://www.w3.org/2001/XMLSchema"
xmlns:this="http://schemas.microsoft.com/SQLServer/2001/12/SOAP/types"
elementFormDefault="qualified"
attributeFormDefault="unqualified">
<simpleType name="nonNegativeInteger">
<restriction base="int"/>
</simpleType>
<attribute name="IsNested" type="boolean"/>
<complexType name="SqlRowSet">
<sequence>
<element ref="schema"/>
<any/>
</sequence>
<attribute ref="IsNested"/>
</complexType>
<complexType name="SqlXml" mixed="true">
<sequence>
<any/>
</sequence>
</complexType>
<simpleType name="SqlResultCode">
<restriction base="int"/>
</simpleType>
<complexType name="SqlMessage">
<sequence minOccurs="1" maxOccurs="1">
<element name="Class" type="this:nonNegativeInteger"/>
<element name="LineNumber" type="this:nonNegativeInteger"/>
<element name="Message" type="string"/>
<element name="Number" type="this:nonNegativeInteger"/>
<element name="Procedure" type="string"/>
<element name="Server" type="string"/>
<element name="Source" type="string"/>
<element name="State" type="nonNegativeInteger"/>
</sequence>
<attribute ref="IsNested"/>
</complexType>
<complexType name="SqlResultStream">
<choice minOccurs="1" maxOccurs="unbounded">
<element name="SqlRowSet" type="this:SqlRowSet"/>
<element name="SqlXml" type="this:SqlXml"/>
<element name="SqlMessage" type="this:SqlMessage"/>
<element name="SqlResultCode" type="this:SqlResultCode"/>
</choice>
</complexType>
<element name="sp_deleteme">
<complexType>
<sequence>
<element minOccurs="0" maxOccurs="1" name="name" type="string" nillable="true"/>
</sequence>
</complexType>
</element>
<element name="sp_deletemeResponse">
<complexType>
<sequence>
<element minOccurs="1" maxOccurs="1" name="sp_deletemeResult"
type="this:SqlResultStream"/>
</sequence>
</complexType>
</element>
</schema>

Problem building Openbox

Similar Messages

Maybe you are looking for